REPAIR/REPLACEMENT OF SUMMER AND WINTER APPLIANCES IN MD AND OTM ACCN AT SHANKAR VIHAR, BANA SINGH ENCLAVE, YOGENDER VIHAR, 18 MADRAS AND 5/11 GR UNDER AGE E/M OF GE (SOUTH) DELHI CANTT-10

Amount

Taking down of ceiling fan/ exhaust fan dismantling of blades, transportation to work shop and carrying out rewinding, transportation to site, reinstallation with required cable and testing complete all as specified and as directed. Note:- Rewinding will be measured and paid under respective item of this Schedule.

M&L for Rewinding of ceiling fan 1200/1400 mm sweep by dismantling of fan motor cutting and removing of burnt windings, cleaning, winding with supper enameled copper wire of superior quality, same gauge of wire, same Nos of turns, provn of insulation paper applying of varnish drying of varnish and assembling of fan including replacement of gun metal bush, ball bearing where ever required complete all as specified and as directed.Note : Gun metal bush, clamp, shaft, rod, bearing shall be measured and paid separately.

All as per Srl item No 2 above, but exhaust fan 230/300 mm sweep.

All as per Srl item No 2 above, but wall fan upto 450 mm sweep.

S&F BLDC ceiling fans Motor Copper Winding complete and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor complete all as specified and as directed. Notes for Srl item No. 2, 3,4 & 5 (i) Rates are inclusive of transportation to work shop and carrying out rewinding, transportation to site after rewinding & testing on installation. (ii) Ceiling fan/Exhaust Fan/Geyser will be issued from E/M store yard for rewiding and major defects. (iii) The rate quoted by the tenderer are also included taking down of existing unserviceable spare parts. However, fixing of new parts shall be measured and paid separately under respective items of this Schedule.

S&F Exhaust Fan motor upto 300mm sweep copper winding as per existing , assembling of fan including replacement of nut, bolts and connecting cable where ever required complete all as specified and as directed

S&F in repairs Ceiling fan Ball bearing of suitable size & model as per sample complete all as specified and as directed.

S&F in repairs U clamp with rubber real for hanging ceiling fans of 1200/1400mm sweep as per sample complete all as specified and as directed.

S&F MS louvers suitable for exhaust fan of size upto 450 mm sweep as per sample complete all as specified and as directed.

Supply of BLDC ceiling fan blade for size 1200mm sweep complete all as specified and as directed.

S&F of down rod of 1.5 feet height fabricated out of MS pipe 12mm dia heavy duty, duly painted with one coat of white synthetic enamel paint complete all as specified and as directed.

S&F suitable size for blade (set of 3 blades) of Ceiling fans 1200/1400mm sweep heavy duty as per sample complete all as specified and as directed.

S&F blade of exhaust Metal fans of 230/300 mm swipe heavy duty as per sample complete all as specified and as directed.

S&F of ceiling fan capacitor of 2.5 mfd complete all as specified and as directed.

S&F of ceiling fan capacitor of 3.5 mfd complete all as specified and as directed.

S&F for fan regulator electronic, stepped type/switch type, suitable for ceiling fan 1200/1400mm sweep complete all as specified and as directed.

taking down and Descalling of geyser 25/35/50 ltrs capacity of any make, opening up complete for inspection descalling by chemical treatment of internal tank, thermostate pipe, base plate assembly including replacement of gaskets testing and refixing in position including making electrical and water connection complete all as specified and as directed. Note : the rate quoted by the tenderer are deemed to be included taking down of old unserviceable spare parts. However new spare parts shall be measured and paid separately on S&F here in after.

S&F of heating element of 1.5 KW including rubber washers (ISI marked) etc as per site requirement complete all as specified and as directed.

S&F of heating element of 2.0 KW including rubber washers (ISI marked) etc as per site requirement complete all as specified and as directed.

S&F of storage tank made out of SS sheet of appropriate thickness and confirming to or as per sample for Upto 50 litre capacity geysers with collar, duly tested at required pressure complete all as specified and as directed.

S&F of MS base plate assembly 20 SWG heavy duty suitable for 25 to 50 litre capacity geyser with complete inlet, outlet and thermostat pipe with drain plug and screw for fixing the element including clamps for holding the element with nuts, bolts and safety valves suitable for all type of geysers installed at site As per sample complete all as specified and as directed.

S&F of safety plug and nut for high pressure release as per sample complete all as specified and as directed.

S&F Rubber gasket for Water heater storage of any capacity fixed and suitable as per the existing complete all as specified and as directed.

S&F 16 AMP plug Top complete all as specified and as directed.

S&F of PRCD 16 AMP, 30 mA plug Top complete all as specified and as directed.

S&F of MS top & bottom cover for geysers of Upto 50 ltrs capacity any make as per sample complete all as specified and as directed.

S&F of MS outer cover for geyser made out of MS sheet suitable for upto 50 ltrs capacity geyser vertical/horizontal type complete all as specified and as directed.

S&F MS fastner bolt 8 mm dia and upto 150 mm long for fixing Geyser/Exhaust Fan with nuts and washers complete all as specified and as directed.

S&F indicating lamp round / flat type as required for geyser 25/35/ 50 litres capacity as per sample complete all as specified and as directed.

S&F safety valve ISI marked for geyser 25/35/50 litres capacity as per sample complete all as specified and as directed.

S&F of thermostat 9/11" (ISI Marked) for 25/35/50 Litres capacity Geyser as per sample complete all as specified and as directed.

S&F PVC connection with brass nipple 15 mm x 600 mm long with ISI marked suitable for hot and cold water of 25/50 ltrs capacity of geyser connection with 2 Nos brass/CP nuts as per sample complete all as specified and as directed.

S&F LED building security light 45 Watts from existing bracket complete all as specified and as directed.

S&F GI pipe's bracket suitable for fixing of bldg security LED light fitting of 45 Watts including grouting and fixing the same on wall for installation of light fitting with necessary clamps, nut, bolts & washer and painting by synthetic enameled good quality paint in white/grey colour over one coat of red oxide primer until unless smoothness of bracket complete all as specified and as directed. Note :- GI pipe should be 25 mm bore with medium grade and the same to be moulded in 45 degree angle at the 1 Mtr height to fix the building security light fitting.

Taking down copper/aluminium point wiring (light, fan, socket or pwer) complete including fitting and fixture such as switches, ceiling roses, pendants, regulators, sockets, calling bell etc making good disturbed surfaces of walls, floors etc. complete all as specified and as directed.

M&L for point wiring complete, stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable suitable concealed/surface PVC/MS conduit and including replacment of unsv pressed steel terminal boxes of required size and factory painted with stove enameled black paint with top cover 3mm thick plastic/laminated sheet of required colour with screwed and cup washer with all accessories including 1.5 Sqmm stranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete all as specified for One light/Fan/Bell point controlled by one switch 5 Amps one way using cable (1.5 Sqmm for phase and neutral and 1.5 Sqmm for earthing) complete all as specified and as directed. Note:- The rate is inclusive cutting/chasing and making good distrubed surface with CM 1:3 adn same surface finishes with the adjoining surface of distribed area with ODB/colour wash/white wash completed.

All as per item No.36 above but for one socket outlet 5/6 Amps on independent board with cable 1.5 Sqmm size for phase and neutral and 1.5 Sqmm for earthing with through existing PVC/MS conduit.

All as per item No.36 above but for one socket outlet 5/6 Amps on same board with cable 1.5 Sqmm size for phase and neutral and 1.5 Sqmm for earthing with through existing PVC/MS conduit.

All as per item No.36 above but for one socket outlet 15 Amps on independent board with cable 2.5 Sqmm size for phase and neutral and 2.5 Sqmm for earthing with through existing PVC/MS conduit.

All as per item No.36 above but here-in-before for one light controlled by 2 Way switch using cable 1.5 Sqmm size for phase and neutral and 1.5 Sqmm for earthing with through existing PVC/MS conduit.

S&F switch piano flush type 5/6 Amps SP one way complete all as specified and as directed.

S&F switch piano flush type 5/6 Amps SP two way complete all as specified and as directed.

S&F bell push, flush type 5/6 Amps complete all as specified and as directed.

S&F socket outlet 2-in-1, 5/6 Amps flush mounted 5 pin multi purpose complete all as specified and as directed.

S&F switch piano flush type 15/16 Amps SP one way complete all as specified and as directed.

S&F universal socket outlet 2-in1 (multipurpose) 5 pin 6/16 Amps flush mounted type complete all as specified and as directed.

S&F 0-4 step type electronic regulator for ceiling fan 1200/1400 sweep, 240 V complete all as specified and as directed.

S&F electric bell ding dong any type complete all as specified and as directed.

S&F ceiling rose surface bakelite 65x25 mm two to three terminals complete all as specified and as directed.

S&F lamp holder bakelite insulated body with back plate suitable for batten fitting complete all as specified and as directed.

S&F in repairs wall mounted LED integrated batten T-5 20 Watt - 4ft white 6500K, indoor decorative PVC extruded T-5 LED batten - integrated type in repairs of old unsv existing 36/40 Watt FTL fitting any type complete all as specified and as directed.

S&F in repairs of wall mounted LED integrated batten T-5 10 Watt - 2ft white 6500K, indoor decorative PVC extruded T-5 LED batten - integrated type in repairs of old unsv existing 36/40 Watt FTL fitting any type complete all as specified and as directed.

S&F in repairs of decorative wall light mounting suitable for LED lamp upto 15 Watt complete all as specified and as directed.

S&F in repairs of surface mounting round/square shape LED down lighter 12 Watt any type complete with including new flexible wire as requried on site in repairs of old unsv existing ceiling light fitting complete all as specified and as directed.

S&F in repairs of LED 10 Watt white bulk head in engineering plastic housing with clear prismatic including required LED bulb and all accessories connecting up twisted flexible copper conductor cable of suitable size of 230 V, 50 Hz complete all as specified and as directed.

S&F in repairs of LED re-charable bulb 15 Watt , AC 230V, 50 Hz suitable for Batten Holder/Bulk head/SK light fittings in repairs of old unsv lights any type complete all as specified and as directed.

M&L for concealed point wiring complete with stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable drawn through concealed /surface PVC conduit in wall and Existing conduit in ceiling and including replacement of unserviceable pressed steel terminal boxes with Modular steel terminal boxes including white cover modular plate with frame suitable for modular switches, modular sockets, modular fan regulators etc of required size complete including 1.5 sqmm copper cable earth continuity wire to common earth and connected to earth dolly complete all as specified and as directed. Note :- The rate is inclusive cutting/chasing and making good disturbed surface with CM 1:3 and same surface finishs with the adjoining surface of disturbed area with OBD/Colour wash/white wash complete all as specified and as directed. One light /fan/Bell point/security light controlled by one way switch

All as per Srl item No.57 above, but one 3 pin socket outlet 5 amps point same board with cable 1.5 Sqmm for main current and 1.5 sqmm as earth wire.

All as per Srl item No.57 above, but one 3 pin socket outlet 5 amps point independent board with cable 1.5 Sqmm for main current and 1.5 sqmm as earth wire.

All as per Srl item No.57 above, but one 3 pin socket outlet, 15 amps on independent board with cable 2.5 Sqmm for main current and 2.5 sqmm as earth wire as power point.

All as per Srl item No.57 above, but one 3 pin socket outlet, 15 amps on independent board with cable 4 Sqmm for main current and 4 sqmm as earth wire as AC point.

S&F Switch Modular type switch, 6 A 1- way SP switch complete all as specified and as directed.

S&F modular type 2/3 pin combined shuttered type 6A socket complete all as specified and as directed.

S&F Switch Modular type switch, 16 A 1- way SP switch complete all as specified and as directed.

S&F modular type 2/3 pin combined shuttered type 16 A socket complete all as specified and as directed.

S&F modular AC Box with MCB 20 Amps complete all as specified and as directed.

S&F in repairs Exhaust fan motor copper winding light duty PVC body 250 mm Sweep complete with blades and accessories 230 V complete all as specified and as directed.

S&F in repairs Exhaust fan motor Copper Winding Light duty PVC body 300 mm Sweep complete with blades and accessories 230 V complete all as specified and as directed.

S&F in repairs Exhaust fan motor Copper Winding Light duty Metal body 300 mm Sweep complete with blades and Frame accessories 230 V complete all as specified and as directed.

S&F in repairs Exhaust fan motor Copper Winding Light duty Metal body 450 mm Sweep complete with blades and Frame accessories 230 V complete all as specified and as directed.

S&F in repairs of Exhaust fan iron blades for size 200/300 mm sweep as per sample complete all as specified and as directed.

S&F in repairs of Exhaust fan iron blades for size 450 mm sweep as per sample complete all as Frame specified and as directed.

Note :- The contract sum shall be after deducting the amount of Credit shown in Sch of Credit of this Tender.

verma enterprises

M P TYAGI ENGINEERS AND CONTRACTORS

J V ENGINEERS / JAI SINGH

P R Constructions