LBCNL/2023-24/Dhemaji/D-07

Amount

Ofice Table 2 x 4

Executibve Table 3' x 6'

Almirah (2 palla)

Bookshelves (2 palla)

Sofa Set

Centre table

Bench & Desk 6 feet (Three Seater)

Bench & Desk 4 feet (Two Seater)

Display Hall Table (2' x 12')

Display Board (4' x 8')

Conference Hall Table ( U type)

Multipurpose Hall (DISE) 4' x 16'

Multipurpose Hall Table

Lecture Stand

White Board

Green Board

Chair with written Pad

Executive Chair

P.U. visitor chair 4009

Reck shelf 5 Layers

Revolving Chair H/b 142

Godrej, A/C 2 Ton

65 inch. LED

54 VA stabilizer

A.C installation charge

Projector with accessories & fitting

Sound system Amplifier/Podium with Speaker

Screen 8' x 6'

Computer Set

Printer

Bed Double (Decker) (Size 2'6' x 6') steel frame

Room table

Room chair

Dining Table (3' x 8')

Dining Chair

Bed for warden 4' x 6'

Sofa set for Hostel

Dining table with chair (4 seater)

Table chair 1 pair

Notice Board

Hostel Kitchen Utensils

Curtain Cloth for door & windows

Curtain rod

Curtain Rod Brackets

Fire Extinguisher

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 Coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 4.5 metre and upto 6.5 metre

SITC of all in one integrated LED solar streetlight consists of solar photovoltaic module, battery, battery management system, control electronics, LED driver, PIR sensor, inter-connecting cables and pole mounting piece integrated into ay luminaire asa single unit. Solar street light with IP65 ingress protection having a 2000 lumen output, 28Wp high efficiency polycrystalline solar panel, highly efficient MPPT based charge controller and 12.8 V, 13.6 Ah IP68 Lithium Ferro Phosphate(LiFePO4) battery with proper battery management system. LED lumen efficacy shall be at least 175lm/W and LED driver should have >90% efficiency. Typical correlated colour temperature should aq 5700K with CRI>70. It should have a to PIR sensor ensure battery optimisation with help of a suitable dimming profile.The luminaire should be housed in IK 08 impact resistance certified aluminum pressure diecast housing with anti-corrosive coating and must have a UV stabilized polycarbonate cover. The luminaire shall have a specially designed pole mounting piece that enables lateral as well as post top mounting and installation at varying tilts from 0 to 15 degrees Joy optimal light distribution.

SITC of 06 mtr GI Tubular Pole, 2 section with base plate & J bolt., top dia : 48-60mm. (Pole make: APWD approved make) (For Solar Light)

Supplying with fitting and fixing of High Performance LED street light luminaries with single Die Ceramic base high power LED light source, IP 66 protection, PDC housing & aesthetic finless design and toughened glass cover and treet light optoic (philips Make) Type BRP 052 LED 045 CW SLMR FG S1 PSU GR complete as required and as directed by the department. (For existing PSC pole in the LT line)

Supplying and drawing of weatheer proof aluminium conductor cable of the following sioze as directed and specified by the department. 10.00 sq.mm twin core (RISTACAB CABLE) (Service line to the existing Street light phase of LT line)

Supplying including fitting and fixing of Single Arm Bracket of Octagonal/PSC Pole, Nezone Make, as approved by the Deptt. Single Arm bracket, 1000 mm length. (For existing PSC Pole in the LT line)

Wiring for light point/fan point/ exhaust fan point call bell point with 105 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate , suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Wiring for light/ power plug with 2×4 sq mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for laptop earthing as required.

Wiring for circuit / submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor ,. Single core cable in surface /recessed medium class PVC conduit as reqd. core cable in surface /recessed medium class PVC conduit as read. 2×1.5 sq. mm + 1 × 1.5 sq. mm earth wire

2×2.5 sq. mm + 1 × 2.5 sq. mm earth wire

2×4 sq. mm + 1 × 4 sq. mm earth wire

2×6 sq. mm + 1 ×6 sq. mm earth wire

4×10 sq. mm + 2 × 6 sq. mm earth wire

4×16 sq. mm + 2 × 6 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connection but excluding modular plate etc. as required. 5/6 amps switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 2-3 Module (100 mm x 75mm)

4 Module (125mm x 75 mm)

6 Module (200mm x 75mm)

8 Module(125mm x 125mm)

12 Module(200mm x 150mm)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch , connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch , connections etc. as required.

Supplying and fixing 3 pin , 5 A ceiling rose on the existing junction box/ wooden block including conections etc. as required.

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicale panel, making connections, etc. as required. 200 A TP&N

Providing and fixing following rating and breaking capacity and pole MCCB with thermo magnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel , making ,connections., etc. as required. 100 A, 16 KA, TPMCCB

100 A , 30 KA , FPMCCB

250 A, 36KA, FPMCCB

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface / recess , complete with tinned copper bus bar , neutral bus bar, earth bar , din bar, interconnections, powder painted including earthing etc. as required. ( But without MCB /RCCB/ isolator) 6 way, Double door

8 way Double door

Supplying and fixing following way surface/recess mlounting, vertical type, 415 V, TPN MCB distribution board of sleet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : vertical type MCB TPDB is normally used where 3 phase outlets are required) 4 way (4+12), Double door

Supplying fixing 5 A to 32 A rating, 240/415 V, 10 KA, "C" curve , miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 32 A

Supplying and fixing following rating, four pole,415 volts,insolator in the existing MCB DB complete with connections, testing and commissioning etc. as required 63 A

Supplying and fixing TP sheet steel enclosure on surface/recess along with 16/25/32 A 415 V "C" curve TP MCB complete with connections, testing and commissioning etc

Earthing with copper earth plate 600 mm × 600 mm × 3 mm thick including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required.

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection as required.

Earthing with GI earth pipe 4.5 long, 40mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as reqd.

Supplying and Laying 6 SWG G.I wire at 0.50 metre below ground level for conductor earth electrode, including connections/ termination with G.I thimble etc. as required

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc as required. Upto 35 sq. mm

Supplying and fitting and fixing of LED 18/20 W T-5 luminaries complete with all accessories such as ballast, starter etc directly on wall /Ceiling with making necessary connection as required.

Supplying inciuding instailation, commissioning of vermin and dust proof totally enclosed, Phosphatised Powder Painted cubical Outdoor type foor mounting compartmentalize panel board of size 1200 (w)x 1250 (H) + 400 (D) mm made of 16 SWG1.66m thick C.R sheet and 35 mm: x 35 mm x 5 mm size angle having nos.of leg at the bottom and C.R. sheet roofing on the top. The paneL board is to be erected in 1:3:6 PCC foundation including excavation of one no. 200 A4 pole MCCB or Switch Fuse as incomer and provision for 2 nos. DP or TPN out going as specified and directed by the deptt. Confirming to IP 65 protection. 1. 30 mm x 5 mm 4 strip copper bus-bar 0.5 M length each.

Supplying including fitting and fixing of following A.C wall fan in the wall of following sweeps with making necessary connections as approved by the Deptt. As required complete and as directed by the Department 400 mm sweep(Bajaj Make)

Supply and laying of following size PVC / XLPE insulated and PVC sheathed 1.1 KV Grade solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated , armoured U. G. cable . U.G. Cable laid in ground / partially in air (as required for termination over ground including excavation of cable trench up to depth of 75 cm , refilling , protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. 16.00 Sq. mm . 4 Core armoured U.G. cable.

25.00 Sq.mm 4 Core armoured U.G. cable

Rabin Handique