Replacement of Overhead Electrical Line by underground Cabling in Nalco Nagar Township

Amount

Laying of 4C x 10 sq.mm LT power cables inside excavated trench including supply and spreading of sand supply and laying of bricks, back filling etc.

End termination of cable upto 4C x 10 sqmm with supply of glands and sockets.

Laying of 4C x 10 sq.mm over any surface including clamping to the walls/poles/ structures by suitable clamps as the case may be (Clamps, nuts & bolts to be supplied by the party).

Laying of 4C x 35 sq.mm LT power cables inside excavated trench including supply and spreading of sand supply and laying of bricks, back filling etc.

End termination of cable upto 4C x 35 sqmm with supply of glands and sockets.

Laying of 4C x 35 sq.mm over any surface including clamping to the walls/poles/ structures by suitable clamps as the case may be (Clamps, nuts & bolts to be supplied by the party).

Laying of 3.5C x 50 sq.mm LT power cables inside excavated trench including supply and spreading of sand supply and laying of bricks, back filling etc.

End termination of cable upto 3.5C x 50 sqmm with supply of glands and sockets.

Laying of 3.5C x 120 sq.mm LT power cables inside excavated trench including supply and spreading of sand supply and laying of bricks, back filling etc.

End termination of cable upto 3.5C x 120 sqmm with supply of glands and sockets.

Laying of 3.5C x 240 sq.mm LT power cables inside excavated trench including supply and spreading of sand supply and laying of bricks, back filling etc.

End termination of 3.5C x 240 sqmm cable with supply of glands and sockets.

Dismantling from excavated trench or from walls/ poles/structures and depositing at NALCO's stores of LT cables upto 4C x 35 sq.mm.

Laying of 3C x 300 sq.mm HT cables over any surface including clamping to the walls/ poles/structures by suitable clamps as the case may be with the supply of clamps, required nuts & bolts etc. (the job includes measuring and shifting of the cable from store/yard to work spot under the scope of work for the contractor).

Indoor termination of 11KV XLPE power cable of 3C x 300 sq.mm without supply of termination kit.

Fabrication and erection of steel supports/ frame structures (without supply of steel) etc with two coats of anti-corrosive primer, two coats of synthetic paint including supply of hardwares like nuts, bolts, clamps for mounting switches / starters / panels / luminaries as per direction of Engineer-in-charge.

Fabrication and erection of steel supports/ frame structures (with supply of steel) etc with two coats of anti-corrosive primer, two coats of synthetic paint including supply of hardwares like nuts, bolts, clamps for mounting switches / starters / panels / luminaries as per direction of Engineer-in-charge.

Excavation of earth in all types of soil conditions excluding soft rocks as per direction of Engineer-in-charge.

Excavation of concrete and reconcreting as per the direction of Engineer-in-charge with supply of all concreting material like cement, bricks, sands, chips by the party.

Installation, testing, commissioning including connection of pole mounted distribution board upto 63Amp (to be supplied by NALCO) on existing wiring with supply of required hardwares like screws, clamps as may be required as per direction of Engineer-in-charge.

Removal of Binding and rebinding jumpers on O/H LT lines wherever required as per instruction of EIC.

Erection, testing and commissioning of 250Amp feeder pillar with supply of all hardwares & foundation material including shifting the panel from central store / sub-store to site.

Dismantling of conductors (3x1 Al. conductor), cross arms, insulators hardwares etc. for group of conductors in HT overhead line and depositing at NALCO's stores.

Erection of street light junction box including necessary connection of wires/ cable. All hardwares as may be required to be supplied by the contractor.

Installation of earth pit including earth excavation and supply of all materials (1.8M long and 40mm dia. perforated GI pipe electrode, coke, salt, GI nut bolts etc) and making of RCC chamber with precast RCC covers with supply of brick, cement, sand, chips etc. as per direction of Engineer-in-charge

Laying of GI pipes in excavated trench, over steel or any other structures upto size 100mm dia including cutting, bending and clamping to structures / supports and similar other work without supply of GI pipes and as per direction of Engineer-in-charge.

Supply and laying of 25x3mm GI strips on ground/inside excavated trench, on the wall, any other surfaces including supply of all hardwares like clamps, screws as per direction of Engineer-in-charge.

PROGRESSIVE ENGINEERS AND ASSOCIATES