REPAIR TO CERTAIN STEEL FURNITURE INCLUDING PAINTING AT BABINA CANTT UNDER GE BABINA

Amount

Welding to steel frames of furniture article such as Table dining OR's, Table 3'x3' steel, Table 3'x2' with /without drawer steel, Teapoy Verandah, Table office clk/Offrs steel, Chair CB steel with/without arms, Almirah large/Med steel, locker steel, Locker steel (TD-645), Chair CBA special with hand rest, Chair verandah, Form without back steel, stool steel, Table 1520x860x760mm and Bunks (Bed) etc. includes fixing of parts in proper position by preparing the old welding surfaces. Welding shall be done through gas welding, the thickness of the metal to be welded n. exc. 16 gauge. length of welding exc. 25mm at each point, all as directed.

Replacement of worn out conduit MS size 25 sq.mm 16 gauge wherever required for such as Table dining OR's, Table 3'x3' steel, Table 3'x2' with /without drawer steel, Table office clk/Offrs steel, Chair CBA special with hand rest, Table 1520x860x760mm steel, Bunks (Bed) mattress and drawers etc. and as directed and fixing as shown on drg. (welding points shall be measured separetly as per ser item No 1 above).

Table dining OR'S (FD-165(M):- TOP : Supply and fixing new top made out of 18/19 mm thick prelaminated particle board exterior grade one side teak shade other side white in colour including first class hard wood (Teak wood) beading 6mm thick shall be provided all around complete as shown on drawing after removing the old one.

Table dining OR'S (FD-165(M):- Fitting : Hard rubber shoes in WHITE colour suitable for frame as approved shall be provided to the legs.

Table dining OR'S (FD-165(M):- Painting : Painting to steel structure complete with two coats of paint synthetic enamel black over a coat of primer after preparation of steel surfaces. Primer shall be provided where welding has been done as well as new MS conduit is provided.

Table 3'x3' steel (FD-1009):- Top : M&L for removing of unserviceable top and supply & fix new top of MDF board 18/19mm thick confirming to IS 12408 Make-Bajaj gold or as approved duly covered with 0.80mm thick plastic laminated sheet confirming to IS as approved in natural teak shade. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table 3'x3' steel (FD-1009):- Fitting : Hard rubber shoes in WHITE colour suitable for frame as approved shall be provided to the legs.

Table 3'x3' steel (FD-1009):- Painting : Painting to steel structure complete with two coats of paint synthetic enamel black over a coat of primer after preparation of steel surfaces. Primer shall be provided where welding has been done as well as new MS conduit is provided.

Table 3'x2' without drawer steel ( FD-1007):- Top : M&L for removing of unserviceable top and supply & fix new top of MDF board 18/19mm thick confirming to IS 12408, duly covered with 0.80mm thick plastic laminated sheet confirming to IS as approved in natural teak shade.Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table 3'x2' without drawer steel ( FD-1007):- Fitting : Hard rubber shoes in WHITE colour suitable for frame as approved shall be provided to the legs.

Table 3'x2' without drawer steel ( FD-1007) : Painting : Painting to steel structure complete with two coats of paint synthetic enamel black over a coat of primer after preparation of steel surfaces. Primer shall be provided where welding has been done as well as new MS conduit is provided.

Table 3'x2' with drawer steel ( FD-1008):- Top : M&L for removing of unserviceable top and supply & fix new top of MDF board 18/19mm thick confirming to IS 12408 Make- Bajaj gold or as approved duly covered with 0.80mm thick plastic laminated sheet confirming to IS as approved in natural teak shade. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table 3'x2' with drawer steel ( FD-1008):- Drawer : Supply and fixing new drawer made out of 0.80mm thick MS sheet alongwith PVC recessed handle as shown on drg.

Table 3'x2' with drawer steel ( FD-1008):- Locks : Supply and fixing lock ISI marked suitable for drawer after removing the old one of approved quality.

Table 3'x2' with drawer steel ( FD-1008):- Fitting : Hard rubber shoes in WHITE colour suitable for frame as approved shall be provided to the legs.

Table 3'x2' with drawer steel ( FD-1008):- Painting : Painting to steel structure complete with two coats of paint synthetic enamel black internally/externally over a coat of red oxide primer after preparation of steel surfaces. Primer shall be provided where welding has been done as well as new MS conduit is provided.

Teapoy Varandah (FD-255, 35(M)):- Top : M&L for removing of unserviceable top and supply & fix new top of MDF board 18/19mm thick confirming to IS 12408 Make- Bajaj gold or as approved duly covered with 0.80mm thick plastic laminated sheet confirming to IS as approved in white shade. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Teapoy Varandah (FD-255, 35(M)):- Frame : Supply in replacement of frame made out of angle iron size 20x20x3mm with legs 4 nos, 10 mm dia MS bar made to shape alongwith centre support of size 25x3mm MS flat welded to angle iron frame as shown on drg (FD-35(M) welded to frame duly painted with synthetic enamel paint white over a coat of red oxide primer etc complete. Note : painting shall be done with spray gun.

Teapoy Varandah (FD-255, 35(M):- Painting : Painting to steel structure complete with two coats of paint synthetic enamel white over a coat of red oxide primer after preparation of steel surfaces. Primer shall be provided where welding has been done.

Table office clerk steel (FD- 84(M) /1004):- Top size 1200 mm x 600 x 18 mm thick : M&L for removing of unserviceable top and supply & fix new top of MDF board 18/19mm thick confirming to IS 12408 Make- Bajaj gold or as approved duly covered with 0.80mm thick plastic laminated sheet confirming to IS as approved in natural teak shade. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table office clerk steel (FD- 84(M) /1004):- Top size 1500 mm x 900 mm x 18 mm : M&L for removing of unserviceable top and supply & fix new top of MDF board 18/19mm thick confirming to IS 12408 Make- Bajaj goldor as approved duly covered with 0.80mm thick plastic laminated sheet confirming to IS as approved in natural teak shade. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table office clerk steel (FD- 84(M) /1004):- Drawer : Supply and fixing new drawer made out of 0.80mm thick MS sheet alongwith PVC recessed handle as shown on drawing.

Table office clerk steel (FD- 84(M) /1004):- Lock of drawer : Supply and fixing of lock ISI marked or as approved in replacement suitable for Table with duplicate keys fixing in position centre locking system.

Table office clerk steel (FD- 84(M) /1004):- Fitting : Hard rubber shoes in WHITE colour suitable for frame as approved shall be provided to the legs.

Table office clerk steel (FD- 84(M) /1004):- Painting : Painting to steel structure complete with two coats of paint synthetic enamel OG internally/externally over a coat of primer after preparation of surfaces. Primer shall be provided where welding has been done as well as new MS conduit is provided.

Table office officer steel (FD- 84(M) 1002 & 1003):- Top size 1370 mm x 750 mm x 18 mm : M&L for removing of unserviceable top and supply & fix new top of MDF board 18/19mm thick confirming to IS 12408 Make- Bajaj gold or as approved duly covered with 0.80mm thick plastic laminated sheet confirming to IS as approved in natural teak shade. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table office officer steel (FD- 84(M) 1002 & 1003):- Top size 1800 mm x 1200 mm x 18 mm : M&L for removing of unserviceable top and supply & fix new top of MDF board 18/19mm thick confirming to IS 12408 Make- Bajaj gold or as approved duly covered with 0.80mm thick plastic laminated sheet confirming to IS as approved in natural teak shade. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table office officer steel (FD- 84(M) 1002 & 1003):- Drawer : Supply and fixing new drawer made out of 0.80mm thick MS sheet alongwith PVC recessed handle as shown on drg.

Table office officer steel (FD- 84(M) 1002 & 1003):- Lock of drawer : Supply and fixing of lock ISI marked or as approved in replacement suitable for Table with duplicate keys fixing in position centre locking system.

Table office officer steel (FD- 84(M) 1002 & 1003):- Shutter : S&F in replacement shutter made out of 1.00mm thick MS sheet made to shape as per drg alongwith suitable lock with duplicate keys Make- Link/Harrison or as approved.

Table office officer steel (FD- 84(M) 1002 & 1003):- Fitting : Hard rubber shoes in WHITE colour suitable for frame as approved shall be provided to the legs.

Table office officer steel(FD- 84(M) 1002 & 1003):- Painting : Painting to steel structure complete with two coats of paint synthetic enamel OG internally/externally over a coat of primer after preparation of surfaces. Primer shall be provided where welding has been done as well as new MS conduit is provided.

Chair CB steel W/Arm /W/O Arms (FD- 75(M) ):- Seat : S&F of sheesham wood seat frame suitable for chair CB steel tubular with arms woven with 2mm wide cane plastic in true Godrej pattern perferably in teak finish duly sprit polished after taking out the old one as shown on drg.

Chair CB steel W/Arm /W/O Arms (FD- 75(M) ):- Seat : All as per Ser item No 33 here-in-before but for Chair CB steel tubular without arms.

Chair CB steel W/Arm /W/O Arms (FD- 75(M) ):- Back : S&F of sheesham wood back frame suitable for chair CB steel tubular with arms woven with 2mm wide cane plastic in true Godrej pattern perferably in teak finish duly sprit polished after taking out the old one as shown on drg.

Chair CB steel W/Arm /W/O Arms (FD- 75(M) ):- Back : All as per Ser item No 35 here-in-before but for Chair CB steel tubular without arms.

Chair CB steel W/Arm (FD- 75(M) ):- Arms : Supply and fixing in replacement PVC arms as per sample in teak/black finish.

Chair CB steel W/Arm /W/O Arms (FD- 75(M) ):- FI stiffner of size 25 x 3 mm x 100 mm long : FI stiffner shall be welded with side rails of the chairs to rest seat of Chair CB steel with arms and without arms irrespective of what is shown on drg and as directed.

Chair CB steel W/Arm /W/O Arms (FD- 75(M) ):- PVC Cap : PVC cap suitable for 20 mm dia 1.6mm thick pipe of best quality shall be provided as approved.

Chair CB steel W/Arm /W/O Arms (FD- 75(M) ):- Hard PVC toes with screws : Hard PVC toes of approved quality and to be fixed with screws to the bottom of the chair as shown on drg.

Chair CB steel W/Arm (FD- 75(M) ):- Painting : Painting to Chair CB Steel tubular with arm externally shall be done after preparation of surface with paint synthetic enamel OG.

Chair CB steel W/O Arms (FD- 75(M) ):- Painting : Painting to Chair CB Steel tubular without arm externally shall be done after preparation of surface with paint synthetic enamel OG.

Almirah large/Medium/small/Glazed & 1/2H x1/2S steel (FD- 67(M) FD 1031,1033,1034):- Lock : S&F in replacement lock ISI marked having 3 way locking device suitable for Almirah with duplicate keys Make-Reena/ Lico /Somex or as approved.

Almirah large/Medium/small/Glazed & 1/2H x1/2S steel (FD- 67(M) FD 1031,1033,1034):- Locking Device : M & L for repairing locking device and lock bar as required and as directed by Engr-in-Charge.

Almirah large/Medium/small/Glazed & 1/2H x1/2S steel (FD- 67(M) FD 1031,1033,1034):- Door shutter : M & L for adjustment of door shutters by denting as required and directed by Engr-in-Charge.

Almirah large/Medium/small/Glazed & 1/2H x1/2S steel (FD- 67(M) FD 1031,1033,1034):- CP handle : S&F in replacement C P steel handle ISI marked and to make the locking device in proper function as specified and shown on drg.

Almirah large/Medium/small/Glazed & 1/2H x1/2S steel (FD- 67(M) FD 1031,1033,1034):- Legs : S & F in replacement legs (Foot rest) of 18 gauge MS sheet wherever requied to Almirah Med/small including 1/2H x 1/2S steel made to shape as per drg.

Almirah large/Medium/small/Glazed & 1/2H x1/2S steel (FD- 67(M) FD 1031,1033,1034):- Legs : S & F in replacement legs (Foot rest) of 18 gauge MS sheet wherever requied to Almirah large, glazed including 1/2H x 1/2S steel made to shape as per drg.

Almirah large/Medium/small/Glazed & 1/2H x1/2S steel (FD- 67(M) FD 1031,1033,1034):- Shelf : S&F in replacement Shelf to be made of 1.00 mm thick MS sheet for Almirah large steel, glazed and 1/2H x 1/2 S as per drg and shall be fixed with reviting and suitable MS clamps as approved.

Almirah large/Medium/small/Glazed & 1/2H x1/2S steel (FD- 67(M) FD 1031,1033,1034):- Shelf : S&F in replacement Shelf to be made of 1.00 mm thick MS sheet for Almirah med/small steel and 1/2 H x1/2S as per drg and shall be fixed with reviting and suitable MS clamps as approved.

Almirah large/Medium/small/Glazed & 1/2H x1/2S steel (FD- 67(M) FD 1031,1033,1034):- Hanging rod : Supply and fixing in replacement conduit pipe steel chromium plated 20mm bore 1.6mm thick with suitable bracket and stapled socket open at one end as approved shall be fixed Almirah large/ Med steel 1/2 H x1/2S as shown on drg.

Almirah large/Medium/small/Glazed & 1/2H x1/2S steel (FD- 67(M) FD 1031,1033,1034):- Painting : Painting to Almirah large and 1/2H x 1/2S steel, glazed internally & externally after removing the dust /de-rusting of surface by applying putty wherever required, preparartion of surface with two coats of paint synthetic enamel OG /Silver grey as directed by Engr-in-Charge. Primer shall be provided at places where welding has been carried out and new shelf is provided.

Almirah large/Medium/small/Glazed & 1/2H x1/2S steel (FD- 67(M) FD 1031,1033,1034):- Painting : Painting to Almirah med/small and 1/2H x 1/2S steel internally & externally after removing the dust /de-rusting of surface by applying putty wherever required, preparartion of surface with two coats of paint synthetic enamel OG /Silver grey as directed by Engr-in-Charge. Primer shall be provided at places where welding has been carried out and new shelf is provided.

Locker bed side Steel (FD-1029):- Hasp & Stapple : Supply and fixing in replacement hasp and staple aluminium ISI marked size 75x40x3mm to shutter as shown on drg.

Locker bed side Steel (FD-1029):- CP Socket : Supply and fixing in replacement mild steel chromium plated socket for fixing 19mm dia conduit pipe hanging rod, all as specified and shown on drg.

Locker bed side Steel (FD-1029):- Handle : Supply and fixing in replacement aluminium handles 100mm long ISI Marked as approved.

Locker bed side Steel (FD-1029) : Hanging rod : Supply and fixing in replacement conduit pipe steel chromium plated 20mm bore 1.6mm thick with suitable bracket and stapled socket open at one end as approved shall be fixed as shown on drg.

Locker bed side Steel (FD-1029):- Shutters : Supply and fixing in replacement shutter of locker steel made of 1mm thick PBI sheet of size and shape as per drg.

Locker bed side Steel (FD-1029):- Legs : Supply and fixing in replacement legs of locker steel fabricated out of 1.00mm thick MS sheet made to shape as per drg.

Locker bed side Steel (FD-1029):- Hinges : Supply and fixing in replacement 75mm long MS hinges to shutter of locker steel including revetting all as directed.

Locker bed side Steel (FD-1029):- Painting : Painting to locker steel internally & externally after removing the dust /de -rusting of surface by applying putty wherever required, preparartion of surface with two coats of paint synthetic enamel OG /Silver grey as directed by Engr-in-Charge. Primer shall be provided at places where welding has been carried out.

Locker Steel (TD-645):- Lock : S&F in replacement lock ISI marked having 3 way locking device suitable for Locker steel with duplicate keys as approved.

Locker Steel (TD-645):- Locking Device : M & L for repairing locking device and lock bar as required and as directed by Engr-in-Charge.

Locker Steel (TD-645):- CP Socket : Supply and fixing in replacement mild steel chromium plated socket for fixing 19mm dia conduit pipe hanging rod, all as specified and shown on drg.

Locker Steel (TD-645):- CP handle : S&F in replacement C P steel handle ISI marked and to make the locking device in proper function as specified and shown on drg.

Locker Steel (TD-645):- Drawer : Supply and fixing in replacement drawer of locker steel made of 1mm thick PBI sheet of size and shape as per drg.

Locker Steel (TD-645):- Hanging rod : Supply and fixing in replacement conduit pipe steel chromium plated 20mm bore 1.6mm thick with suitable bracket and stapled socket open at one end as approved shall be fixed as shown on drg.

Locker Steel (TD-645):- Shutters : Supply and fixing in replacement shutter of locker steel made of 1mm thick PBI sheet of size and shape as per drg.

Locker Steel (TD-645):- Legs : Supply and fixing in replacement legs of locker steel fabricated out of 1.00mm thick MS sheet made to shape as per drg.

Locker Steel (TD-645):- Hinges : Supply and fixing in replacement 75mm long MS hinges to shutter of locker steel including revetting all as directed.

Locker Steel (TD-645):- Painting : Painting to locker steel internally & externally after removing the dust /de -rusting of surface by applying putty wherever required, preparartion of surface with two coats of paint synthetic enamel OG /Silver grey as directed by Engr-in-Charge. Primer shall be provided at places where welding has been carried out.

Chair Excutive/Revolving/Computer, long/short back (TP):- Coaster wheel : Supply and fixing in replacement, PVC coaster wheel of Chair superior quality as approved.

Chair Excutive/Revolving/Computer, long/short back (TP):- Adjustment lever : Supply and fixing in replacement, adjustment lever of Chair superior quality as approved.

Chair Excutive/Revolving/Computer, long/short back (TP):- Hydraulic system : Supply and fixing in replacement of hydrolic system components i.e Tilt plate, socker, rod and push spring complete.

Chair Excutive/Revolving/Computer, long/short back (TP):- PVC Arms : Supply and fixing in replacement, PVC arms of Chair superior quality as approved.

Chair Excutive/Revolving/Computer, long/short back (TP):- Seat and back cushion : Material and labour for taking out old unserviceable material / tapestry from seat and back and supply and fixing foam 23 density Make- Kurlon duly covered with tapestry cloth superior quality not less than 350/- per meter as approved. Lining / piping shall be provided all around seat and back.

Chair CBA special with hand rest (FD-120(M)® ):- Seat : Supply and fixing seat frame as per trade pattern made of well seasoned sheesham wood duly caned in true godrej pattern suitable for chair CBA spl with hand rest. Canning shall be done by cane plastic 2mm thich half round in white colour with frame of 3mm wide cane. Seat frame shall be french polished in teak wood finish and to be fixed to frame with suitable screw steel ISI marked.

Chair CBA special with hand rest (FD-120(M)® ):- Back : All same as per ser item no 77 above but back for chair CBA spl with hand rest.

Chair CBA special with hand rest (FD-120(M)® ):- Hand rest : M & L back rest made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair CBA special with hand rest (FD-120(M)® ):- Fitting : Hard rubber shoes in WHITE colour suitable for frame as approved shall be provided to the legs.

Chair CBA special with hand rest (FD-120(M)® ) : Painting : Painting to steel structure complete with two coats of paint synthetic enamel OG over a coat of primer after preparation of surfaces. Primer shall be provided where welding has been done.

Chair Verandah (FD-256):- Caning : Removing of unserviceable/torn out plastic cane from Chair Verandah and recanning the same with new white cane 4mm wide and 0.4mm thick half round oval shape of Make- Ajay/Primer/Shah brand. Weaving shall be mat pattern or as directed by Engr-in-Charge

Chair Verandah (FD-256):- Hard PVC Shoes : Supply and fixing in replacement, hard PVC shoes superior quality as approved for chair verandah.

Chair Verandah (FD-256):- Painting : Painting to steel structure complete with two coats of paint synthetic enamel white over a coat of primer after preparation of surface. Primer shall be provided where welding has been done.

Form without back steel frame (FD-77/97):- Seat Plank : M&L for replacement of seat plank as per drg complete all as specified and directed.

Form without back steel frame (FD-77/97):- Fitting : Hard rubber shoes in WHITE colour suitable for frame as approved shall be provided to the legs.

Form without back steel frame (FD-77/97/similar pattern):- Painting : Painting to steel structure complete with two coats of paint synthetic enamel Olive green over a coat of primer after preparation of surfaces. Primer shall be provided where welding has been done.

Stool Steel (FD-81 (M), FD-409):- Supply and fixing new Top made out of 1.00mm thick MS sheet of stool steel complete all as specified, directed and shown on drgs.

Stool Steel (FD-81 (M), FD-409 ):- Painting : Painting to steel structure complete with two coats of paint synthetic enamel enameled Olive green over a coat of primer after preparation of surfaces. Primer shall be provided where welding has been done.

Trestle SR Iron/Steel (FD- 86 M/ similar pattern):- Painting : M&L for removal of existing worn out painting from inside & outside including preparation of surface frame complete and M&L for applying two coats paint synthetic enamel black over a coat of red oxide primer, complete all as specified, directed and shown on drgs.

Table 1520x860x760mm steel (FD-1010, FD-1012, FD-1013, FD-1011, FD-1009, similar pattern):- TOP : M&L for removing of unserviceable top and supply & fix new top of MDF board 18/19mm thick confirming to IS 12408 Make- Bajaj gold or as approved duly covered with 0.80mm thick plastic laminated sheet confirming to IS as approved in natural teak shade. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table 1520x860x760mm steel (FD-1010, FD-1012, FD-1013, FD-1011, FD-1009, similar pattern):- Fitting : Hard rubber shoes in WHITE colour suitable for frame as approved shall be provided to the legs.

Table 1520x860x760mm steel (FD-1010, FD-1012FD-1013FD-1011FD-1009, similar pattern):- Painting : Painting to steel structure complete with two coats of paint synthetic enamel Olive green over a coat of primer after preparation of surface. Primer shall be provided where welding has been done as well as new conduit MS is provided.

Bunks (Bed) mattress and drawers (TP):- Plywood with foam and leatherite : M&L for replacement of Unserviceable Foam Rexin and bottom ply of bunks (Beds) and supply and fixing new foam 50 mm thick 32 HD covered with best quality Rexin including bottom plywood 12mm thick commercial MR Gde and to be fixed with screws to the steel frame as directed by Engr-in-Charge, size of ply 1840mmx760mm. Shape and size all as existing or as per directed by Engr-in-Charge.

Bunks (Bed) mattress and drawers (TP):- Head Rest : M&L for replacement of head rest duly made out of 18 / 19 mm thick prelaminated particle board exterior grade one side teak shade other side white in colour including first class hard wood Teak wood beading 6mm thick shall be provided all around complete of size 820mmx200mm.Shape and size all as existing or as per directed by Engr-in-Charge.

Bunks (Bed) mattress and drawers (TP):- Drawer : M&L for replacement of drawer duly made out of18 / 19 mm thick prelaminated particle board exterior grade one side teak shade other side white in colour including first class hard wood Teak wood beading 6mm thick shall be provided all around complete of size 700x400x120mm. Suitable brass handle and lock as approved shall be provided. Shape and size all as existing or as per directed by Engr-in-Charge.

Bunks (Bed) mattress and drawers (TP):- Leg : M&L for replacement of leg duly made out of GI Pipe 32mm dia bore med grade of size 450mm long shape and size all as existing or as per directed by Engr-in-Charge.

Bunks (Bed) mattress and drawers (TP):- Cabinate door : M&L for replacement of drawer duly made out of18 / 19 mm thick prelaminated particle board exterior grade one side teak shade other side white in colour including first class hard wood Teak wood beading 6mm thick shall be provided all around complete of size700mmx210mm. Suitable brass handle as approved shall be provided shape and size all as existing or as per directed by Engr-in-Charge.

Bunks (Bed) mattress and drawers (TP):- Cabinate complete : Supply and fixing in replacement cabinate complete of size 790mmx750mmx420mm outer structure made of 0.80mm thick MS sheet and MS angle 20x20x3mm and complete with drawer and cabinate door made out of all same as per item ser no 96 and 98 above shape and size all as existing or as directed by Engr-in-Charge.

Bunks (Bed) mattress and drawers (TP):- Painting : Painting to steel structure complete with two coats of paint synthetic enamel black over a coat of primer after preparation of surface. Primer shall be provided where welding has been done as well as new conduit MS is provided.

M/S JAI BALAJI TRADERS