REPAIR/REPLACEMENT OF TILING, CEILING, SANITARY FITTINGS IN TECH AREA AND FENCING TO GATE AND SECURITY WALL AND PATH AT AF STN GORAKHPUR

Amount

M&L for one coat of exterior emulsion paint over old decorated surface of wall including preparation of surface complete all as specified and as directed.

M&L Complete removal of existing treatment by scrapping, washing, rubbing down & stopping etc of old painted surfaces and applying two coats of exterior emulsion paint on walls complete all as specified and as directed.

M&L for Preperation of old painted surfaces of wall and applying one coat of exterior emulsion paint in camouflage pattern (two or more colour combination) .

M&L for Complete removal of existing treatment by scrapping, washing, rubbing down & stopping etc of old painted surfaces and applying two coat of exterior emulsion paint camoflague pattern over a coat of primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint by using mechanised euipments as smart periodicals complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old surfaces applying one coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

M&L for preparation of old surfaces applying two coats of oil bound distemper over 1mm thick putty using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

Demolition of brick work built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed.

M&L brick work in CM ( 1:6 ) with using sub class `B' brick straight or curved on plan exceeding 6.0mtr mean radius complete all as specified and as directed.

Taking down cement plaster on brick wall and ceiling including raking out joints hacking for key scrubbing down with water etc complete all as directed.

M&L for rendering 15 mm thick in CM ( 1:6 ) plaster on wall / concrete surfaces finish fair and even without using extra cement.complete all as specified and directed at site.

M&L for rendering 15 mm thick in CM ( 1:4 ) plaster on wall / concrete surfaces finish even and smooth without using extra cement complete all as specified and directed at site.

M&L for rendering 05 mm thick in 1:3 cement mortars as in ceiling.

M&L including preparation of new plastered surfaces and applying two coat of white wash on ceiling.

M&L including preparation of new plastered surfaces and applying two coat of cement base paint complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying two coat of exterior emulsion paint camouflage pattern over one coat of primer by using mechanised euipments as smart periodicals complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over waterproof cement based putty @ 1 Kg (undiluted) per sq mtr. of average thickness 1 mm, of Asian Paints or its equivalent over the plasteredusing Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

Dismantling of false ceiling board ,fiber insulation board any thickness including wooden cover fillets aluminium frame work complete all as specified and directed at site.

S&F anodised aluminium snap grid ( size 605mm x 605mm) frame work for false ceiling with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and fixing 4mm thick non asbestos fibre cement building building boards on aluminium framework complete all as specified and directed.

M&L for raking out cement mortar joints/pointing to brick work in walls or to bricks on edge in floors, surface channels, roofs etc complete all as specified and directed

M&L for flush pointing in brickwork laid flat on roof surface etc with using cement mortar 1:3 complete all as specified and directed

Dismantling existing transparent PVC sheets in roof complete all as specified

S&F 2.0mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed in roof etc complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof covering complete all as specified and directed.

M&L 0.50 mm thick (total coated thick) pre-painted galvalume aluminum zinc coating GI based corrugeted steel sheet having tensile sterength of 550 Mpa as an roof covering /cladding to wall fixed with self tapping screws as specified complete all as specified and directed.

M&L for refixing of 0.50 mm thick (total coated thick) pre-painted galvalume aluminum zinc coating GI based corrugeted steel sheet having tensile sterength of 550 Mpa as an roof covering /cladding to wall fixed with self tapping screws as specified complete all as specified and directed.

Taking down chowkats with shutters exceeding 1.5 Sqm but n. exc 4 sqm each ( without taking off shutters from the frames)

M&L for 2nd Class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed.

M&L for flat iron 40mmx6mm as in clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L PCC 1:3:6 type C-1 as in filling in holes of hold fasts.complete all as specified and directed at site.

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides fixed to chowkhats complete all as specified .

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube.complete all as specified and directed at site.

M&L for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2 ,modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S&F 200 mm long aluminum anodized barrel tower bolt of exturded section complete all as specified and directed at site.

S&F 150mm long aluminum handles cast type anodized fixed complete all as specified and directed at site.

S&F 100mm long butt hings medium weight cold rolled stainless steel and fixed complete all as specified and directed at site.

S&F aluminium alloy anodised sliding door bolt with hasp and staples(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt aand sliding bolts of extruded sections or cast aluminium alloy length of bolt 250mm complete all as specified and as directed by Engineer in Charge.

M&L for painting on new wooden surfaces of any description, not otherwise descri-bed, over 10cm width or girth over one coat of pink primer and applying two coat of synthetic enamel paint including preparation surfaces complete

Repair/easing/ readjusting of aluminium door/window shutters by taking down shutters from frame and dismentling members of shutters like, glass, rails and styles by necessary cutting, grinding of members etc and refixing of same including rubber gasket ,hinges , handle, screws etc complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.complete all as specified and directed at site.

S&F in repair door closer hydraulically regulated, aluminium (extruded section body )designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60kg complete all as specified and directed at site.

S&F in repair 5.5mm thick, sheet/ tinted glass, ordinary quality to be fixed with aluminium beading and rubber gas kit in aluminium frame work as in door/ window/ partition etc complete all as specified and directed at site.

M&L for 4mm thick both side aluminium decorative sheet laminated partition panel for fixing in aluminium door shutters by taking out old ply/board from exsting aluminium door shutters complete all as specified and directed at site.

S& F in repair aluminum glazing clips / beading for aluminum door and window, complete all as specified and directed at site.

S& F in repair rubber gasket for packing / beading for aluminum door and window, complete all as specified and directed at site.

Demolition of PCC floor ,plinth and paving not exceeding 15 cm thickness below or above ground level,complete all as specified and directed at site.

M&L 75mm thick PCC (1:3:6) type C1 as in plinth protection etc finished even and smooth without using extra cement.complete all as specified and directed at site.

M&L for providing cement concrete type B-1, 1:2:4 using 20 mm graded aggregate as in 40 mm thick flooring ,finishing the concrete surfaces even and smooth using extra cement .complete all as specified and directed at site.

M&L for Machine cut kota stone slab flooring 20-25mm thick over 15mm thick cement screed bed in CM 1:4 CM laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified including dismantling of broken kota stone slabs.complete all as specified and directed at site.

Dismantling of wall tiling and M&L for glazed ceramic coloured tiles 350x250x7mm/ 450x350x7 mm thick on wall as in dado / skirting laid with cement slurry over 10mm thick rendering CM in 1:4 complete all as directed .

Dismantling of floor tiling and M&L for non skid Ceramic coloured tiles 7-8 mm thick (square or recatngular ) area of each tiles exceeding 0.11 sqm and not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement over 15 mm thick screed bed in 1:4 CM complete all as specified and directed at site.

Dismantling of existing tiling and M&L for Light shade Vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tile not exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement to match over 15mm thick screed bed in 1:4 cement mortar complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite includeing dismantling of existing broken granite slab complete all as specified and directed.

Taking down 15 mm bore water tubing and connection including cleaning for re-fixing or removing to store.complete all as specified and directed at site.

Taking down 20 mm bore water tubing and connection including cleaning for re-fixing or removing to store.complete all as specified and directed at site.

Supply & Laying of CPVC pipes of outer dia 20mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supply & Laying of CPVC pipes of outer dia 25mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Dismantling of water tank PVC of any pattern and S&F for 500 ltr capacity rotational moulded polyethylene water storage tank ( cylindrical vertical with closed top ) hoisted and Fixed in position all as specificed in SSR part-I. Including supply and fixing of 15mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipes and Fixed ( Min Wt 15mm -142 Grams) complete all as directed.

S&F in repair for 15mm bore bib taps chromium plated with crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrule complete all as specified and directed at site.

S&F in repair for 15mm bore pillar taps cast copper alloy with capstan heads ,chromium plated ,screwed down high pressure .with or without lettered Hot or Cold with long screwed shanks and flynuts screwed for iron pipes. complete all as specified and directed at site.

S&F in repair for 15mm bore stop valves cast copper alloy screwed down high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete as directed.

S&F in repair for 20 mm bore stop valves cast copper alloy screwed down high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete as directed.

S&F in repair for 15mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipes and fixed ( Min Wt 15mm -142 Grams) complete all as specified and directed at site.

S&F in repair for 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipes and fixed ( Min Wt 20 mm -210 Grams) complete all as directed.

S&F in repair vitreous china squatting pan 'Orrisa' pattern size 580mm x 440 mm white with integral foot rest and including trap exuding flushing cistern and flush pipes complete) .complete all as specified and directed at site.

S&F in repair vitreous china wash hand basin flat back sizes 550mmx400mm excluding taps,waste chain and plug and porcelain stopper but including bracket complete all as specified and directed at site.

S&F for 15mm bore pillar taps cast copper alloy with capstan heads ,chromium plated ,screwed down high pressure .with or without lettered Hot or Cold with long screwed shanks and flynuts screwed for iron pipes. complete all as specified and directed at site.

S&F in repair Vitreous China wash down water closet pan (Europian pattern) white excluding flushing cistern & flush pipe including plastic water closet seat cover closed pattern with flat bottom and cover and MS chromium plated aluminised hinging device including connection to trap drain pipe or outgoing pipes and to flushing pipe anti syphonage pipe etc.complete

S&F in repair Viterous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete incl providing and fixing plugs, bedding urinal against wall in cement mortor 1:2, complete all as specified and directed at site.

S&F in repair CP soap dish/tray fixed with wall complete all as specified and directed at site.

S&F PVC connections 15mm sizes with PTMT nut of length 600mm complete all as specified and directed at site.

S&F in repair PTMT gratting doom of 100mm dia size complete all as specified and directed at site.

S&F in repair PVC valveless syphonic action type low level flushing cistern and flush pipe for 10ltr capacity with inlet ball valve float and handle including bracket complete all as specified and directed at site.

S&F in repair CP angle stop cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified and directed at site.

S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gms), complete all as specified and directed at site.

Labour only for brickwork for security wall / perimeter wall with subclass `B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 but except bricks ( using only serviceable Brick obtained from dismantling) complete all as specified and directed at site.

M&L prepation of old plastered surfaces of wall, pilasters, cornices etc and applying two coat of cement base paint complete complete all as specified and as directed..

M&L for preparation of old painted steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint by using mechanised euipments as smart periodicals complete all as specified and as directed by Engr-in-Charge.

M&L for Glazed ceramic coloured tiles of 300x200x7mm/300x450x7mm thick, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over 10mm thick cement plaster in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground post embeded in cement concrete.complete all as specified and directed at site.

Taking down chain link fencing fixed to any type of standard rails, straining bolts etc complete all as specified and directed.

Dismantling of concertina coil 600mm dia any shape including razor wire of six linc etc all as specified and directed.Note :- Concertina coil and six link razor wire shall be measured as one Rm .

Dismantling Galvanized, 2 strand, steel barbed wire of any description.complete all as specified and directed at site.

M&L PCC 1:3:6 type C2 40mm graded stone aggregate as in fixing of fencing post and mass concrete all as specified.

S & F mild steel work as in posts and struts in fencing incl cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets incl all necessary drilling, bolting or rivetting etc and similar work confirming to Fe 290 Gd E-165. complete all as specified and as directed.

Supply only chain link MS galvanised fencing, any size or type of minimum dia 3.15 mm or above as directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standard rails, straining bolts etc.

M&L for mild steel round bar 10 to 12mm dia confirming Fe-410-W (Gde.E-250) Fe 290 (Gde - E-165) as in stiffeners to chain link fencing etc all as specified and directed.

M&L Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing in repairs to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc. as directed (each line of wire to be measured).

M&L for two coat synthetic enamel paint over a coat of red oxide primer on new steel surface of any description over 10cm width or girth incl preparation complete all as specified

S&F 610mm dia punched tape concertina coil (effective dia 550mm at strech length of coil 6m) with two handle and spikes at both end of coil with dovetail clips [18 SWG], incl razor wire [7 No], 6m length of each wire medium size, barbed length 20mm width 14mm, incl 51 pins, 128 nos of clips in each coil incl 230gm/ Sqm Zinc coating on core wire complete all as specified.

Fixing only existing serveciable concertina coil and razor blade complete all as specified and diected at site.

Dismantling structural steel work including doors, gates but excluding framed truss etc.complete all as specified and directed at site.

S&F rolled mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed at site.

M&L Cutting holes in brick walls built in cement mortar for inserting hold fasts exc one brick but not exc two brick.complete all as specified and directed at site.

M&L plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate in foundations, filling and mass-concrete, complete all as specified and directed at site.

S&F in repair chequered cement concrete tiles (20cmx20cmx25mm or 30cmx30cmx25mm) thick with gray cement and pigment, set, jointed and pointed in neat cement slurry in floors over and including 15 mm thick screed bed or bedding layer in CM 1:4 complete all as specified.

M&L sand filling n. exc. 30cm thick under floors or in foundation including watering and well ramming with consolidation of thickness as specified and directed.

S&F in repair machine pressed rubber moulded precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment, complete all as specified and directed at site.

M/S B.P. CONSTRUCTION

M/s Pandey Trading Company

M/S DIVYA TRADERS

ANIRUDH ENTERPRISES

M/S NITISH ASSOCIATES

M/S P.S Mishra