Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.7 LAccepted-Finance | L1 | Accepted-Finance Lowest |
Tender Value
₹1.7 L
EMD Value
₹3,429
Closing Date
17 Jan 2022, 9:00 amClosed
EE WSD APWD
EE WSD APWD Port Blair
Repair renovation of Servant Quarter converted into Office Room including existing bathroom in C.S. Bungalow Complex, Port Blair. Sw Providing IEI and supplying electrical appliances including R.O. Water Purifier, Electrical Kettle Induction Stove
2022_APWD_4958_1
134/NIT/WSD/2021-22
Open Tender
Electrical Works
Works
10 days
Port Blair
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹3,429
20 Jan 2022
13 Jan 2022
17 Jan 2022
13 Jan 2022
17 Jan 2022
13 Jan 2022
13 Jan 2022 - 17 Jan 2022
Amount
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
Group A
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
2 X 6 sq. mm +1 X 6 sq. mm earth wire
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
2 Module (75mmX75mm)
3 Module (100mmX75mm)
6 Module (200mmX75mm)
12 Module (200mmX150mm)
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
5/6 A switch
15/16 A switch
3 pin 5/6 A socket outlet
6 pin 15/16 A socket outlet
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required
Supplying of LED box type batten suitable for single TLED lamp ( Make:- Philips, Type: TMC 501 P 1xT- LED 22W P3241 or equivalent) with a 18 watt LED T8 tubelamp with PC body ( Make:- Philips, Model: MAS LED tube 18W 1800lm 865 T8 or or any other reputed make) complete with all accessories etc. as required.
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
Supplying and fixing of LED Bulk Head of wattage between 9 W/ 10 W with PDC housing and IP65/ IP66 Protection, CW/NW/WW (Make:-Philips, Model : Endura or equivalent) including connection etc. as required.
Supplying of energy saving BLDC A.C. Ceiling fan of 1200 mm sweep of approved colour suitable for operation on 230 volts, single phase, 50 Hz, AC supply with all accessories as required (Make: Orient, Model: Hector-500 or equivalent).
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
Supplying of exhaust fan of 150 mm. sweep (Non Metallic ) (Make: Usha, Model: 150MM CRISP AIR LX EXH FAN or equivalent).
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
Upto 450 mm sweep
Supplying and fixing PVC batten/ angle holder including connections etc. as required.
Supplying and fixing of 9W, B22 LED lamp, CDL( Make : Philips or equivalent) on the existing batten/angle holder.
Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
12 way , Double door
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single pole
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Earthing with ASHLOK make SEE brand Safe Earthing Electrode, Type- 19, 50 mm dia., length 2.00 mtrs. or equivalent by filling inner space with 50 Kg Electrodite (Back Fill Compound ) required for safe earth electrode and providing masonary enclosure with cover plate having locking arrangement etc.as required.
Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.
Supplying of 1600W Induction Cook Top ( Make: Usha, Model : CJ 1600WPC or equivalent).
Supplying of 1.5 litres Electric Kettle with concealed element and detachable power base and feature like automatic cut off etc. ( Make: Prestige, Model : PKOSS 1.5 or equivalent).
Supplying of RO water purifier with multiple purification system with minimum purification capacity of 20 L/hr.((Make: Kent, Model : Pearl zww, Model Code : 11098 (RO + UV + UF + TDS Control) or equivalent)).
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .