Special repair to TR hut at Madhopur under GE Basoli

Amount

M&L for brick work with old size sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4 complete all as specified and directed.

All as per item No 01 here-in-before but except bricks complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins arches pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed.

Taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Rendering 15mm thick on brick work or concrete surfaces as in wall in cement mortar 1:4 finished surface even and smooth without using extra cement complete all as specified and directed.

Rendering 15mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screeding in CM 1:4 over 25mm thick plain cement concrete type B-0 1:2:4 (using 12.5 mm graded crushed stone agg) and roughening the surface and applying cement slurry@3Kg/Sqm complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screeding/rendering in CM 1:4 complete all as specified and directed.

M&L for providing 75mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.

Material and labour for 15-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete, all as specified and directed.

Rounding/moulding to edges of stone slabs, marble stone, granite stone slab one edge such as in steps, cooking plateform and other similar situation complete, all as specified and directed.

M&L Box type steel windows comprised of tubular frame and shutters made out of 1.25mm thick MS sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes shall be measured and paid separately) with side hung shuttters with steel handle and steel peg stay devotailed or welded incl 2 Nos tower bolts 150mm long for each leaf and 10mm square bar grills at spacing shown on drg welded to GI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC block etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for providing cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) for filling in the pressed steel door frame/hold fast complete all as specified and directed..

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and directed

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) exc. 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed .

M&L for factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fix Factory made fully glazed/wire guage shutter (single piece both side) PVC prelam door shutter 30mm thick (style) consisting of frame made out of mild steel tubes of size 19mm x 19mm (19 guage) in styles, single piece plain coloured PVC sheet 5mm thick to be used to cover styles and rails. PVC sheet strip of 20mm width stuck inside solvent cement for stiles & plain coloured PVC sheets for top rail, lock rail and bottom rail on either side as gap insert for top rail and bottom rail, panel will be wire guage and tighten firmly and fitted as per manufacturer instructions including stainless steel wire cloth 0.25mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm and aluminium XPM in Rohmbus Shape in one piece from top rail to bottom rail all as specified and directed. Note : All screws shall be self tapping chrome plated.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed..

S&FGalvanised MS wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm, complete all as specified and directed..

S&F Aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt,complete all as specified and directed..

S&F Extruded aluminium alloy handles fabricated type anodised and fixed, 150 mm size complete, all as specified and directed.

S&F MS 300mm ordinary rat tail rod pattern springs including roller and roller plate. complete all as specified and directed..

Supply and fix for Aluminium alloy, anodised, sliding door bolt 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed,complete all as specified and directed.

Supply and fix for Decorative curtain rod 20mm dia MS powder coated with fixing brackets, stops, rollers etc complete all as specified and directed.

M&L for preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of old steel and iron surfaces exceeding 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preperation of new plastered surface of wall and applying two coat of cement base paint over a coat of primer, complete all as specified and directed.

M&L for preperation of new plastered surface of wall and applying two coat of distemper oil emulison over and including a coat of 3mm thick wall care putty and one coat primer, complete all as specified and directed.

Material and labour for 75mm thick plain cement concrete type D-2 1:4:8 (using 40 mm graded crushed stone agg) as in subfloor sub base complete all as specified and directed by Engineer-in-Charge .

Material and labour for Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick set jointed and pointed in neat cement slurry including screed bed 15mm thick in cement mortar 1:4 in floors with grey cement and no pigment complete all as specified and directed .

Demolition of cement concrete unreinforced of any discription complete all as specified and directed.

Dismantling structural steel work including door , gate etc. Complete all as specified and directed by Engr-in-Charge

Dismantling framed truss span not exc 10metre and refixing the same. Complete all as specified and directed by Engr-in-Charge

Supply and fixing MS tube for steel work in tubular trusses including columns purlin rafter etc complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. -240 complete all as specified and directed

Erection and fixing only MS tube for steel work in tubular trusses including columns purlin rafter etc complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. -240 complete all as specified and directed

Supply and fix for MS bolts purpose made 12 mm to 20mm dia of neck with hexazonal or sqrs heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washer and one hexazonal of sequare nuts etc , complete all as specified and directed.

Supply and fix in position suspended false ceiling system using E-grid suspended ceiling grid system . The size of grid shall be 600x600mm with GI frame work main runner 38x24mm cross tee 25x24mm and wall angle 24mm x24mm using 9mm thick ceiling panel laminated with PVC film on front face and foil back available in due drop texture as per IS-2095 Part-I 1996 fixed in the grid of E grid suspended ceiling Grid system duly sespended ceiling Grid system duly suspended by 4mm dig GI bar hangers from the purlins of the roof with butter fly clips including preparation of surfaces and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate) in roof kerb or mud stop rouinded for chamfered on edges, as directing complete all as specified and directed .

Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate) in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rouinded for chamfered angles and throating, as directing complete all as specified and directed .

Dismantling Asbestos cement ceiling boards any thickness,including cover fillets complete all as specified and directed .

Dismantling asbestos cement, corrugated or semi-corrugated sheets in roofs complete all as specified and directed.

Supply and fix for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws . complete all as specified and directed.

Supply and fix for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in ridge, fixed with self tapping screws . complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Material and labour for Point wiring with 1.5 Sqmm (nominal area)copper conductor FRLS cable (Multi stranded) PVC insulated and unsheathed in and including concealed PVC rigid non metallic conduit (ISI marked) with sunk cast iron/pressed steel terminal boxes of suitable size with 3mm thick plastic laminated sheet for light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistranded) PVC insulated and unsheathed with colour code earth wire connected to common earth dolly complete all as specified. Note : (a) Unit rate include for cutting chases for conduit and sinking for boxes and making good to wall, floors etc. The metal flush box and cover plate shall be measured & paid under relevant items of BOQ'

All as per item No 48 but for one 3 pin 5 Amp socket outlet on independent board complete all as specified and directed.

All as per item No 48 but for one 3 pin 5 Amp socket outlet on same board complete all as specified and directed.

Material and labour for Point wiring with 2.5 Sqmm copper conductor FRLS cable (Multi stranded ) PVC insulated and unsheathed cable conductor in and including concealed PVC rigid non metalic concealed conduit (ISI marked) of suitable size with metal flush boxes of adequate size with cover plate for one 3 pin socket outlet 15 amps on independent board incl continuous 1.5 sqmm copper conductor FRLS (multistranded) PVC insulated and unsheathed cable earth wire connected to common earth dolly complete all as specified. Note : Unit rate for cutting chases for conduit and sinking of boxes and making good to wall,floor ceiling complete all as specified and directed by Engineer in charge. The metal flush box and cover plate shall be measured & paid under relevant items of BOQ'

Supply and fix Switch piano, flush type single pole, one way 5 Amp. complete all as specified and directed.

Supply and fix Socket outlet 2 in 1, 5 pin, 5A complete.complete all as specified and directed.

Supply and fix Switch socket combination 2 in 1, 6 pin, 6 and 15 Amp flush type universal. complete all as specified and directed.

Supply and fix ceiling rose surface bakelite, two to three terminal isolated body fixed on PVC round block complete all as per specified and directed.

Supply and fix for stepped type electronic fan regulator flush type with 5 steps speed control complete all as specified and directed.

Supply and fix for sheet metal powder enclosure powder coated versatile double door SPN, 230 Volt, 50 HZ, 8 way distribution board for MCB provisions fitted with copper bus bar rated 200 Amp, neutral link , complete all as specified and directed.

Supply and fix in replacement LED recess mounting powdercoated white CRCA full glow panel 45 watt 2x2 ft incorporated with all fixing arrangements complete with all accessories internally pre-wired and Make : Crompton cat part No: (CYGNUS-C/45W/2X2/W or equivalent in Philips/Wipro/ Bajaj incl all necessary electric connection with three core copper cable 23/0.0076 complete all as specified and directed.

Supply and fix in repair for MCB SP 5 to 32 Amps with 10 KA breaking capacity complete all as per specified and directed.

Supply and fix in repair for MCB SPN 40 amps with 10KA breaking capacity complete all as per specified and directed.

Material and labour in repair for existing sub main wiring with two run of single core FRLS PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 6.00 Sqmm drawing into and including PVC non metallic rigid conduit of size 25mm dia min and making electric connections including one run FRLS PVC insulated single core copper conductor cable 6.00 Sqmm as a earth continuity conductor(green colour) in and including in non metallic rigid PVC conduit, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Three run of 6.00 sqmm single core FRLS PVC insulated copper conductor cable and one run of PVC conduit of suitable size will be measured as a one unit.

Material and labour for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe with funnel with wire mesh at top, 15 mm bore light grade earth lead protection pipe upto main board with RCC cover suitable handle and angle iron frame for pit top and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include the cost of earthing wire and protection upto 7.5 metre length.)

Supply and fix in repair / replacement LED security light fitting of building of capacity 35 Watt including bracket made to shape at required angle made out of 50mm dia ( medium grade ) GI tubing of length not less than 1.2m long suitable for fixing /holding street light fittings including mild steel flate iron 50 x 6 mm clamp 02 Nos with bolts, nuts and washer complete all as specified and directed.

Supply and Laying in trenches or passing through pipe or fixing to pole/wall UG cable XLPE, insulated,armoured heavy duty electric cable with aluminum conductor,1100 Volts grade,16 Sq mm X 2.0 core cross section area including takingout existing cable complete all as specified and directed.

Material and labour for Sub Class 'B' brick covering protection to the eletric cable laid dry flat transversally along the length of cable on sand cushioning with width equal to length of brick complete all as specified and directed.

Material and labour for sand cushioning to under ground cable 8 cm before laying the electric cable and 15 cm after laying the cable as specified in SSR 1991 of part -I complete all as specified and directed.

Supply and fix in repair for GI light grade tube of size 40 mm dia for laid in trenches/ wall for protection of cable/earthing strip complete all as specificifide and directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in any type of soil complete all as specified and directed...

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft / loose soil. complete all as specified and directed.

Removing excavated material n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Ms Narinder Kumar Sehgal

Ms Dalip Kumar and Co.

GUPTA ELECTRICAL AND ELECTRONICS ENGG WORKS

M/S CANTILEVER ENGINEERS

R K Builders