SMART PERIODICAL SERVICES TO BLDGS OTHER THAN SQN AND OTHER MISC WORK DURING POP NOV 2024 AT ZONE B AREA AT NDA KHADAKWASLA

Amount

M&L for complete removal of existing treatment on wall to make the surface free from dust, loose paint and loose plaster by scrapping surface mannually / mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" ) complete all as specified & directed. Note : - (i) Nails, screws if any to be removed properly before scraping (ii) Mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer

Ditto all as per item No 01 above but for Ceiling surface complete all as specified and directed.

M&L for water proof cement based putty @ 0.75 Kg (undiluted) per sq mtr. of average thickness 1 mm over the plastered / old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI Step 3) Allow 6-8 hrs time to dry the putty surface. Step 4) Cracks of walls to be filled with its filling paste.

Ditto all as per item No 3 above but for Ceiling surface complete all as specified and as directed.

M&L for one coat of acrylic water based interior grade primer @ 0.8 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied on wall with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subbsequent coats complete all as specified and directed.

Ditto all as per item No 5 above but for Ceiling surface complete all as specified and as directed.

M&L for applying two coats of oil bound distemper on wall using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper shall be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.

Ditto all as per item No 7 above but for Ceiling surface complete all as specified and directed.

M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, with Mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint and finished surface smooth, etc. by skilled labour and applying one coat of oil bound distemper on wall using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note : - (i) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

Ditto all as per item No 9 above but for Ceiling surface complete all as specified and directed.

M&L for one coat of acrylic water based exterior grade primer on wall @ 0.9 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

Ditto all as per item No 11 above but for Ceiling surface complete all as specified and directed.

M&L for Two coats water based premium acrylic smooth exterior emulsion paint on wall of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti fangal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed.

Ditto all as per item No 13 above but in ceiling for two coats etc complete all as specified and directed. Note: Quoted Rate shall deemed to be included for necessary scafolding required.

M&L for preparing old surface to make the surface free from dust, loose paint and finished surface smooth, etc. by skilled labour and applying One coat of water based premium acrylic smooth exterior quality emulsion paint on old wall surfaces having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade complete all as specified and directed. Note for Item No 1 to 16 above (a.) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Cement base paint, Putty etc. is proposed to be used by the contractor and as approved.

Ditto all as per item No 15 above but in ceiling for two coats etc complete all as specified and as directed. Note: Quoted Rate shall deemed to be included for necessary scafolding required.

M&L for preparation of old wooden surface smooth with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc or flaming polish which ever is suitable for site and fill the gap or crack with wood filler, POP or putty etc by removing latches / sliding door bolt and refixing the same in the door and applying one coat of synthetic enamel paint exc 10 cm width or girth with fully automatic airless spray machine complete all as specified and directed.

M&L for one coat of synthetic enamel paint with fully automatic airless spray machine including preparation of old painted surfaces of wood, wood based surfaces, AC sheet in ceiling exc 10 cm width or girth etc in ceiling incl filling of gaps between wooden planks with putty, wood filler complete all as specified and directed.

M&L for complete removal of existing treatment, with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc or flaming polish which ever is suitable for site and fill the gap or crack with wood filler or putty (Fill-O-Dent) etc by removing latches / sliding door bolt and refixing the same in the door and apply one or more coats of french polishing above the seal coat till the desired finish is obtained complete all as specified and as directed.

M&L preparing wooden surfaces of any description, over 10cm in width or girth and applying finishing one coat with Woodkeeper 1 K PU by Berger or equivalent complete all as specified and directed.

M&L for preparation of old treated wooden Surfaces of any description, over 10cm in width or girth, fill the gap or crack, hole with wood filler or POP, putty etc including cleaning and make the surface smooth and applying One coat Varnishing (1st quality) etc till the surface became fine glosy finish complete all as specified and directed.

M&L for one coat of aluminium paint incl preparation of old painted steel surfaces exc 10 cm width or girth complete all as specified and directed.

M&L for one coat of aluminium top reflecting coating above the membrane surfaces incl preparation of old painted APP modified membrane exc 10 cm width or girth complete all as specified and directed. Note: Quoted Rate shall deemed to be included for necessary scafolding required.

M&L for one coat of synthetic enamel paint incl preparation of old painted steel surfaces exc 10 cm width or girth complete all as specified and directed

M&L for one coat of cement based paint on wall surfaces incl preparation of old treated surface complete all as specified and directed.

M&L for one coat of cement based paint on Ceiling surfaces incl preparation of old treated surface complete all as specified and directed.

M&L for preparing surfaces of old roof tiles (manglore tiles / taylor tiles) of pattern as specified and applying one coat of water based exterior paint with approved make complete all as specified and directed. Note (i) Area measured flat, no addition shall be made for corrugations, offsets, etc (ii) Rates quoted shall deemed to be inclusive of scaffolding required upto height of 20mtr and safety equipment reqired as per safety norms.

M&L for preparing old surfaces of floor tiles and applying one coat of protective acrylic exterior emulsion paint of approved make (Asian apex floor guard, Indigo floor paint or equivalent as mentioned in makes list of CA) complete all as specified and directed.

M&L for cleaning of external stone surfaces of walls/steps at any height with pressure pump with clean water and by applying one coat of Sagatech S.C. solution (Saga polymers) or similar cleaning solution of Dr fixit/pidilite or other reputed brand as approved by users) @ 3ltr/sqm or as per manufactures instruction. After thoroughly cleaning the surface the loose masonry joints to be properly pointed with (1:3) cement sand mortar mixed with WPC complete all as specified and as directed Note: Necessary scafolding shall deemed to be included in the quoted rate. The scafolding shall be having ease of access for inspection purpose

M&L for preparation of old treated wall surfaces and applying one coat of luster paint complete all as specified and directed.

Ditto all as per item No 30 above but in ceiling surface etc complete all as specified and directed.

Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar incl arches, pillers etc complete all as specified and directed.

M&L for precast cement concrete block walling exc. 10 cm width with solid block PCC 1:3:6 type C1 grade design mix and setting in cement mortar (1:6) complete all as specified and directed.

M&L for 15mm thick rendering on brickwork / concrete surface on wall finished even and smooth (without using extra lime or cement in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick, stone walls, etc., incl racking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for 10 mm thick rendering on brickwork / concrete surface on wall finished even and smooth (without using extra lime or cement in CM 1:6 complete all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid beded & pointed any type of morter complete all as specified and directed.

M&L for 16mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in Roff Vitro adhesive by Pidilile or equivalent including pointing epoxy tile grout to match with shade of granite complete all as specified and directed.

Ditto all as per item No 39 above but except Granite.

M&L for prepration of old painted concrete surface and apply one coat of Plastic emulsion paint on walls exc 10 cm width or girth etc complete all as specified and directed. Note for Item No 1 to 16 & 38,39,43 above (a.) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. emulsion Paint, Distemper, Cement base paint, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (b) Rates quoted are deemed to be inclusive of scaffolding required and safety equipment reqired as per safety norms.(c) Stage for Preparation of surfaces shall be got approved from GE before applying the finishes.(d) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

Ditto all as per item No 41 above but in ceiling etc complete all as specified and directed.

M&L for preparation of old concrete surfaces of wall and applying one coat of synthetic enamel paint on surfaces of concrete exc 10 cm width or girth complete all as specified and directed.

All as per item No 43 above here-in-before but in ceiling etc complete all as specified and directed.

M&L for preparation of old concrete surfaces of ceiling of dome with Mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint and finished surface smooth, etc. by skilled labour and applying one coat of oil bound destemper using Airless spray technology complete all as specified and directed. Notes : (i) The work to be carried out on ceilings at height exc 6mt and n exc 20 mtr in bldg Sudan Block, Habiullah Hall & Vyas Library etc (ii) Rates quoted shall deemed to be inclusive of scaffolding required and safety equipment reqired as per safety norms.

M & L for applying one coat of golden colour paint on small article such as brackets, hardwares design size n. exc 150 mm in length, article un-connected with any other painting or when painted in a different tint including preparation of surface complete all as specified and directed.

Taking up/down plants or vegetation growth from wall at any height by means of cutting hole into brick wall and making good the surface of dismantled portion (not exc 150 sq cm superfical area and not exc one brick depth) using brick bats /aggregate and plastering in cement mortar (1:4) to distrubed portion and applying two coats of cement base paint / weather coat to match the existing surface upto forth floor complete all as specified and directed. Note: Quoted Rate shall deemed to be included for necessary scafolding required.

Demolition of Concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed.

M&L for factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including dismantling of existing and making drainage opening wherever required complete all as specified and directed. Note : Size and shape of kerb stone as shown at site and directed

M&L for preparation of new concrete surfaces of wall and applying two coats of synthetic enamel paint over one coat of alkali registant primer on surfaces of concrete exc 10 cm width or girth complete all as specifed and directed.

Complete Removal of existing Auto line retro reflective thermoplast paint on concrete and bituminous surfaces by brushing with wire brushes for removing cacked mud etc complete all as specified and directed.

M&L for providing through special applicator machine, auto retro-reflective thermoplastic road marking paint in yellow/white, pattern of specified strip, 2.0 mm thick and exc 10 cm, centre line, stop line dashes arrow, brackets similar work on bituminous / cement concrete road surfaces as per IRC pattern including cleaning of road surface free from dust & moisture and putting in duly mixed with 8% mica sign special applicatore machine complete all as specified and as directed. Make of paint : CMS Bombay / Shivalik Prime-Chandigarh / Ritco / Meerut / SN Industries-Delhi)

M&L for preparation of old surfaces of painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide with one coat of reflective road marking paint, white or golden yellow complete all as specified and as directed

S&F in repairs, Cats eye (Road studs), white / red colour reflective type, ABC Body, with both side reflectors and fixed with Nails and as well as epoxy resin as adhesive on bituminous surface, complete all as specified and directed

S & F in repairs solar stud with solar cell LED PCS, Ni-Cd Battery with aluminium main frame bottom frame aluminium, reflective in two opposite direction and fixed in road surface as per manufacturer instructions or complete all as specified and directed. Make : TATA BP SOLAR OR DARK EYE or equivalent make as mentioned in makes list in PS of CA)

S&F in repair 3M Vertical roadway reflective type high performance metal delinator, type XI DG3 reflective sheeting, ellipsoidal body, grooves across the length of delinator etc to be fixed in PCC 1:2:4 (300 mm X 300mm X 300 mm) type B1 Using 20 mm graded stone aggregate incl necessary excavation complete all as specified and directed.

Ditto all as per item No 58 above but except delinator etc complete all as specified and directed.

S & F in repair of 3 mm thick aluminium composite pannel (ACP) board of any size fixed on both sides as per site requirement . ACP board fixed (incl removal of old board) on steel frame / grid with SS screw / rivet as directed. The board shall be sheated with high intensity retro reflective sheett of blue colour or as approved, computerised designed writting letter/figures in (Block, Roman,Italic style or in indian languages where required) / index hand (natural size)/ arrows/stops/commas/ short lines /dashes/ hyphens /bracket, holograms etc where necessary shall be made high intensity reflective sheet with in white colour ladder, shape and sizes as reqd and approved by GE . letter not exc 200 Nos each face of the ACP Board. Each face to have a boarder line of 25mm wide white /red/golden or colour as specified high intensity retro reflective sheet/tape complete all as specified and directed.

M&L for Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete. or like topping surface with beeswax polish or complete all as per method and complete all as specified and directed.

M&L for Grouting and pointing of any type of floor (using proper masking tape) like ceramic tiles/granite/ marble / kota stone / sahabad stone flooring with white/matching colour epoxy tile grout of M/s Pidilite, ROFF RTM epoxy or equivalent, to match the shade of existing floor etc complete all as specified and directed.

Dismantling wall panelling of any thickness any description complete all as specified and directed.

M&L for Plugging to walls complete for 2nd class hard wood fillets, grounds, moulding, boarding etc at distance n.exc 1 m in brick walls/stone wall/PCC block walling complete all as specified and directed.

M&L for IInd class hard wood plain fillets section exc 13 Sqcm and but not exc 25 Sqcm square, rectungular or tringular in section , clean sawn , secured with nails or brads for unframed work complete all as specified and directed.

M&L for 12 mm thick ply wood grade BWR, 7 ply, type BB fixed with screws to timber frame work with screws to timber frame work complete all as specified and directed.

M&L for 4mm thick veneered 3 ply decorative ply wood, grade-I (with BWR resin) with decorative face veneers on one face fixed with fevicle to plywood work complete all as specified and directed.

M/L for Ist class hard wood moulding, cornices plain fillets section exc 6 Sqcm and but not exc 13 Sqcm ,square,rectungular or tringular in section ,clean sawn ,secured with nails or brads for unframed work fixed with screws (mouldings not exc 75mm girth with carving work including) complete all as specified and directed.

S&F Polycarbonate bird spike (pigeon control spike) of existing shape and size, fixed with nails, screws or any suitable means at Dome of Sudan block, Vyas Libray etc complete all as specified and directed. Note: Quoted Rate shall deemed to be included for necessary scafolding required.

S&F in repairs antique / ornamental Brass hevy duty Hinges, Aldrop, tower bolt, handles, latches, window/door stopper, sliding door bolt etc match to existing for doors, windows, ventilators & banister complete all as specified and directed. Make : M/S J Errana, Shri Laxmi Industries (P) Ltd, Classic or equivalent

Fixing only Flag post with nails, screws or any suitable means at Dome of Sudan block, etc complete all as specified and directed. Note: Quoted Rate is deemed to be included for necessary scafolding required.

AMW Construction and developers (BID ID -3102496)

DARSHAN ENTERPRISES (BID ID -3101568)

SUN Enterprises (BID ID -3101900)

G V HAGAWANE (BID ID -3102173)

Pratap enterprises (BID ID -3102484)