PROVISION OF OVERHEAD SHED ON THE 07 X OPEN SQUAD POSTS AT WT AREA NDA KHADAKAWASLA

Amount

Excavating in post holes in hard/dense soil (or similar holes) each n exc 0.5cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25cm

Excavation in trenches not exc. 1.5m wide and not exc 1.5m in depth and getting out soft disintegrated rock for foundation etc.

M&L PCC 1:3:6 type C- 2,(40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified.

Hard-core of gauge n.exc. 63 mm, deposited spread and levelled in layers n. exc. 15 cm thick, watered and rammed to a true surface of broken stone or boulders

Material and labour Cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete as specified

M&L for 100 mm thick PCC 1:4:8 type D2 (40 mm aggregate) a in filling and mass concreting.

M&L 150mm thick plain cement concrete type B-1, (1:2:4) (20mm graded aggregate) as in floors, finishing surface even and smooth without using extra cement

M&L for modular fly ash bricks masonry built in CM 1:6 complete all as specified.

M&L for 15mm thick rendering in CM 1:4 finishing even and smooth without using extra cement.

M&L Preparation of new plastered surfaces and applying two coats of cement base painting including a coat of primer.

Returning filling in including spreading, levelling, watering and well ramming in layers n exc 25 cm thick in hard dense soil.

Removing excavated material n. exc. 250 mtrs and depositing where directed at a level not exc. 1.5 m above the starting point

M&L for Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment

S & F steel work in tubular/hollow square/ rectangular section any thickness and size including special shaped washer etc complete using ERW or induction butt welded tubes/ hollow section for stanchions, rafter, purling, truss fixed with angle cleats as required or other connecting plates confirming to IS 1161-1979 grade St-240 complete as directed.

M & L Preparation of new or previously untreated steel surface of nay description over 10 cm in width or girth, not otherwise described, applying two coats of synthetic enamel paint over and coat zinc primer

Supply and fixing Pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Conceptice Enterprises

M/s DEVRATAN ENTERPRISES

Horizon Construction

Prem Singh

M/s.C.D.Rathod

Sarkar Enterprises

bhardwaj enterprises