45/EWCL/2024-25

Amount

Safe loading carriage including unloading & proper stacking of following store materials from any Electy.Store of Lucknow Zone to work site.

ST Pole 11 Mt Long-SP-55

Polymeric 11 KV Disc Insulator B&S. Type 70 KN.

Disc Fittings Dog/ Racoon 70 KN.

M.S. Angle Iron 65x65x6mm, 4300 mm long 2/6/8 no. Bracing, with 4/12/16 clamps (5.8 kg./m)

M.S. Angle Iron 65x65x6, 3200mm long, 5.8 Kg/Mtr. for cable with clamp

Top channel 125X65mm, 3200 mm long (13.10 Kg./m) with clamp

Earthing complete

Complete Stay (GI Stay rod 20x1800 mm, Stay 7/8 SWG 10 Kg.)

33 KV XLPE Cable 3x300 sq.mm.

33 KV XLPE 3X300 sq.mmm C/J/Kit (Outdoor)

33 KV XLPE 3X300 sq.mmm C/J/Kit (S/Th.)

Erection of the following support including cutting, making holes, fixing of all types of accessories digging pits complete in all respect as per RESSPO drawing. All type of clamps nut & bolt, washer to be provided by contractor.

33 KV End Type Double pole structure on S.T. Pole 11mtr long complete with Top Channel,bracing.& other all acessories

Erection/fixing for 33 KV Stay set with stay wire 7/8 SWG and clamp as per RESSPO drawing including binding, clambing, clamping, tightening, and nozzeling etc. complete in all respect including its grouting in ratio 1:4:8 of cement, sand and brick ballast and sand before back filling of the pits as per RESSPO schedule all clamps, nuts & bolts, cement, brick, concrete blast and etc would be provided by contractor.(Stay Set , Stay wire to be provided by Dept.)

Concreting of supports in 1:4:8 ratio and plinthing of supports upto 300mm above ground level by using cement ,brick ballast and sand in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing.All matrial would be provided by the contractor.

Earthing of STP/PCC supports with Earth Electrode 2.5 mtr. length including excavation of pit and driving M.S. Rod upto proper depth and connecting the earth electrode with the help of 6 SWG G.I. Wire and earthing lugs. RESPO/ RES. drawing.Earthing of each section pole is also to be done. All type of nut & bot would be given by the contractor.

Painting of following supports with one coat of red oxide primer and two coats of aluminum white paint of ISI mark and top danger portion of each support must be painted by providing two coat of Post Office Red Paint (1.5mtr upper portion of support.) Paint and material would be given by contractor to complete of job.

End Type Double Pole of 11 M S.T.P

Providing & Fixing of 33 KV SMC Danger board ( as per GTP)with Clamp & Nut Bolt

Providing & Fixing of 33 KV SMC Number Plate ( as per GTP) with Clamp & Nut Bolt

Providing & Fixing of G.I. Barbed wire (2 Kg./pole)

Providing & Fixing of Stone Pad (300x300x75 mm)

Drilling and Laying of 3x300 Sqmm 33 KV, XLPE insulated U/G Cable double circuit below minimum 1.5 mtr. Depth from ground level.(HDPE.Pipe to be provided by contractor)

Hoisting of 33 KV 3X300 Sq. mm. XLPE cable on double pole including G.I. pipe of size 6" dia 3 M long and its jumpering complete with clamps, nuts and bolts. (GI Pipe,clamps ,PG Clamps, nut bolt etc to be provided by contractor,)

Providing & Fixing of Cable Route Marker

Providing & Fixing of Feeder Name Plate

High Pressure Testing

Dismantling Charges of Shifting Line

Shifting of 33 KV Line with 2 No. ST Pole with fitting after proper Shutdown and instruction of engineer incharge at site

NATIONAL CONTRACTOR & GENERAL ORDER SUPPLIER (BID ID -5000000)

M/s Shubham Traders (BID ID -4999385)