8210 REPAIR TO JOINERY, ROOFING, AC SHEET, FALSE CEILING, RAIN WATER PIPE FLOORING, WALLING, PLASTERING AND CONNECTED ITEMS AT AICTS AND OTHER THAN AICTS AREA UNDER AGE BR I SOUTH PUNE

Amount

Demolition of cement concret in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for dubbing out average 15mm thick on irregular face of walling in CM 1 :4 complete all as specified and as directed.

M&L for rendering 10mm thick cement plaster on dubbing out surfaces using CM(1:6 ) finished with sagol finish complete all as specified and as directed.

M & L for rendering 10mm thick in CM 1:4 on dubbing out surfaces finishes even and smooth with WPC as per manufacturers instruction with sponge finish complete all as specified and as directed. (Note:- WPC will be measured and paid sepprately)

M&L for rendering 10mm thick cement plaster on block masonry/ concrete surfaces using CM (1:6) finished with sagol finish complete all as specified and as directed.

M&L for rendering 10mm thick cement plaster on block masonry/ concrete surfaces using CM (1:4) finished with sagol finish on ceilling complete all as specified and as directed.

Preparation of new plastered surfaces and applying two coats of cement base paint on wall complete all as specified and as directed.

M & L for three coats of white wash on new plaster surfaceses of ceiling complete all as specified and as directed.

M&L for two coats of OBD on walls over a coat of alkali resistance primer including preparation of new surfaces complete all as specified and as directed.

M&L for two coats of oil bound distemper on walls over a coat of chalk whitening including preparation of new surfaces complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors appron etc complete all as specified and as directed.

Demolition of Brick work, solid block or stone masonry built in cement mortar or cement lime mortar after proper supporting of existing structure complete all as specified and as directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified & directed.

M&L for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and as directed.

M & L for 25 mm thick PCC (1:2:4) type B0 (12.5mm graded stone aggregate) as in leveling course of floor tiles etc complete all as specified and directed.

M & L for PCC type B1 1:2:4 (20mm graded aggregate) as in cills, steps, bands, plinth courses, copings, apex stone, bed plates kerbs levelling course etc. complete all as specified and as directed.

M&L for 16 to 18 mm Granite (of any type) work (table rubbed and polished) in steps, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as counters of any radius complete all as specified and as directed.

Rounding to edges of stone slab one edge, such as in steps, cooking plateform and other similar situations complete all as specified and as directed.

S & F Machine cut cuddappa stone slab 20 to 25 mm thick for making cooking platform etc. complete all as specified and as directed.

M & L for PCC 1:2:4 type-B2 (40mm graded aggregate) as in hard standing etc. complete all as specified and as directed.

M&L for hard core of Broken stones gauge not exc. 63mm deposited, spread and levelled in layers not exceeding 15cm thick watered and rammed to a true surface complete all as specified and as directed.

M&L for Digital printed vitirfied polished tiles 7 to 8 mm thick 600 x 600mm size of approved colour, set, jointed in cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 20 mm thick screed bed in CM 1:6 etc complete as in flooring all as specified and directed. (Make : Johnson/ Kajaria/Somany/ Orient Bell)

M&L for matt finished, Joint free coloured ceramic tiles 7 to 8 mm thick 400 x 400mm size of approved colour, set, jointed in cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 20 mm thick screed bed in CM 1:6 etc complete as in flooring all as specified and directed. (Make : Johnson/ Kajaria/ Somany/ Orient Bell.)

M & L for hand cut Kota stone slab, flooring 20 to 25 mm thick over and including 20mm cement screed bed in (1:6) laid and jointed with grey cement slurry mixed with pigments to match with the slab including rubbing and mirror polishing complete etc complete all as specified and directed. (Make : Johnson/ Kajaria/Somany/ Orient Bell)

M & L for kota stone slab skirting/Dado 20 to 25 mm thick in wall including 10mm thick CM (1:4) backing coat set and jointed with grey cement slurry mixed with pigments to match with the slab including rubbing and polishing complete all as specified and as directed.

M&L for 600 x 600 x 6 to 7mm thick, non skid, ceramic, coloured tiles, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including 15mm thick screed bed in CM 1:6 complete all as specified & directed. (Make : Johnson/ Kajaria/Somany/ Orient Bell)

M & L for coloured galzed ceramic tiles 600x300x7mm thick on vertical surfaces including high lighted set and jointed neat cement slurry and pointed in coloured cement to match including 10mm thick rendering on wall in CM 1:4 etc. complete all as specified and as directed. (Make : Johnson/ Kajaria/Somany/ Orient Bell)

M & L for PCC 1:3:6 type C by using (20mm graded aggregate) 75mm thick as in plinth protection/path,floor sub-base etc. including finished the surface smooth and even without using extra cement laid in pannels complete all as specified and as directed.

M&L for precast coloured, chequered cement concrete tiles, glossy finish of size 305 x 305mm x 25mm thick, conforming to IS-1237 (2006) set jointed and pointed in neat cement slurry in floor laid over and including 20mm thick screed bed in CM (1:6) complete all as specified and as directed. (Make : Topaz/Nitco/Bharat Tiles and Engg Coy.)

M & L for machine pressed precast concrete interlocking paver block with grey cement and pigment, glossy finish, any shape and size comforming to IS-15658-2006 of 60mm thick M-30 grade, laid over and including 75mm thick stone dust cushioning, laid dry to the profile over rammed earth/murrum filling all as directed. (Make : Topaz/Nitco/Bharat Tiles and Engg Coy)

M&L for Cement concrete 1:2:4, type B0 (using 12.5mm graded stone aggregate) as in kerb stones with rounded top throating etc complete all as specified and as directed.

Dismantling of wall/ceiling boards of any thickness including cover fillets complete all as specified and as directed.

M&L for Gypsum ceiling board for ceiling prepainted, perforated finish, 595x 595 x 8 to 9mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light at as specified and directed. (Make : Anchor Ceiling Tiles/Gypboard/Bison Panel)

Dismantling AC corrugated/ semicorrugated sheets in roofing complete all as specified and as directed.

S & F 6 mm thick Asbestos cement , corrugated or semicorrugated sheets in roof, walls etc fixed with L or J type hooks complete as in patches complete all as specified and as directed. (Make : Charminar/Everest/Swastik)

All as per Sl. item No. 36.00 above but fixing only complete all as specified and as directed.

All as per Sl Item No. 36.00 above but serrated ridge for corrugated or semi corrugated sheets complete all as specified and as directed.

Dismantling of single layer Mangalore pattern tiles or similar tiles in roofing etc complete all as specified and as directed.

Dismantling battens for tiles shingles etc of any size includingtiling fillets exc 15 cm spacing etc complete all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over in section in any position (unframed wok) etc complete all as specified and as directed.

Dismantling boarding any description fixed in any position with nails etc complete all as specified and as directed.

Dismantling timber scantling under 40 Sqcm in section in any position (unframed wok) etc complete all as specified and as directed.

M & L for IInd class hard wood plain fillets square, rectangular or triangular in section clean sawn secured with nails, sectional area exc. 13 Sqcm but n. exc 25 Sqcm etc complete all as specified and as directed.

All as per Sl Item No. 44.00 above but except fillet complete all as specified and as directed.

M & L for IInd class hard wood clean sawn batten at 30 cm center to center sectional area exc 5 and n.exc 15 Sqcm etc complete all as specified

M&L for roof tiles Mangalore pattern inter locking at side joints laid dry etc complete all as specified. (Make : Charminar/Prajapat/Raja/Recho)

All as per item Sl No 47.00 above but except tiles etc complete all as specified and as directed.

M & L for ridge tile or hip tiles to suit Mangalore pattern of roofing tiles bedded and jointed in CM (1:6) etc complete all as specified and as directed.

All as per item Sl No 49.00 here-in-before but except tiles etc complete all as specified and as directed.

S & F for 25 mm thick 2nd class H/W boarding butt joints plained both sides complete all as specified and as directed.

All as per Sl. No. 51.00 above but but fixing only complete all as specified and as directed.

M&L for second class hard wood clean sawn timber fixed as in scantling complete all as specified and as directed.

All as per item No. 53.00 above but fixing only complete all as specified and as directed.

Taking down chowkate wooden/steel with shutters (w/o taking off shutters from frame) not exc 1.5 Sqm each complete all as specified and as directed.

All as item No. 55.00 above but exc 1 Sqm and not exc 2 Sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm but not exc 2 sq m each complete all as specified and as directed.

Taking down shutters of any description exc 2 sq m each complete all as specified and as directed.

Taking down shutters of steel window by means of gas cutter of any size complete all as specified and as directed.

S & F pressed steel frames for doors with one & more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 125 x 60mm filled with PCC 1:3:6 type C-0 complete all as specified and as directed.

All as per Sl. item No. 60.00 above but size of frame 105 x 60 mm complete all as specified and as directed.

S&F IInd class hard wood in chokats & frames, wrought, framed & rebated etc complete all as specified and as directed.

S & F IInd class hard wood 35mm thick factory made, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneer particle board with commercial veneering on both faces. The size of the rail as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated complete all as specified and as directed.

S & F IInd class hard wood 30mm thick factory made, glazed and skeleton shutter open rebated and prepared to receive glass,gauge,etc.(w/o sash bar) edges of framing plain,chamfered or rounded fitted with cut and mitred beads for securing glass,etc; The size of the rail and stile as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F MS work as in guard bars,using with round or square bars & flat iron etc incl necessary drilling,welding etc complete & simillar articles confirming to Fe-290 grade E-165 complete all as specified and as directed.

S & F 3mm thick veneer over 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side including 3mm thick, 1mm thick 1st Class HW (TW) beading all around on edgingand all as specified and directed. (Note : 3mm thick veneer to be measured seperately )

Preparation of new wooden surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

S & F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aparture 1.18mm in repairs etc complete all as specified and directed.

S & F Aluminium Butt hinges of cold rolled mild steel, medium weight,100mm size fixed with welding with existing MS door frame complete all as specified and as directed.

S & F aluminum anodized barrel tower bolt of extruded section 200mm size etc complete all as specified and directed.

S & F aluminum anodized sliding door bolt 300mm size etc complete all as specified and directed.

S & F aluminum anodized bow handle cast type 150mm size etc complete all as specified and directed.

S & F in repair 0.50mm thick Aluminum plain sheet lining bottom rail of door fixed with nail complete all as specified and as directed.

S & F 150mm floor door stopper of aluminium alloy body and tounge, anodised, with hard drawn steel spring and rubber shoe complete all as specified and as directed.

S & F Solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS tube, supplying and fixing in opening complete all as per specification and as directed.

S&F factory made solid raised panelled PVC door shutter 30mm thick (stiles) consisting of frame made out of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing as per product Drg given on Sl. Page No. 156 of SSR Part-II 2010 Refer item No. 8080 as specified and directed by Engr-in-charge. (Make : Rajshri/Sintex/Dura Plast.)

M & L for PCC 1:2:4, type B1 (using 20mm graded stone aggregate) as in blocks for fixing hold fasts of door / window frames complete all as specified and as directed.

S&F18MM thick commercial plywood Conforming to IS-12823, Gde-I, quality, extrior grade, commercial type as in Kitchen Cabinet etc fixed with screw including 0.9mm thick decorative laminates type 1 of surface finish, colour and pattern on both side as approved, fixed with approved adhesive as per manufacture instructions complete all as specified and directed.

S&F Plain fillets in Ist class hard wood,sectional area exc 13 & nexc 25 sqcm,wrought,fixed with screws in repairs etc complete all as specified and as directed.

S&F in replacement continuous Piano hinges, mild steel bright finished or electro galvanised width of flap 30 mm complete all as specified and as directed.

S&F in repair fancy type handle for cubboard,drawer etc. complete all as specified and as directed.

S&F in repairs Magnet catches and striking plate complete all as specified and as directed.

S&F in repairs 75mm aluminium anodised Hasps & Staples safety type and fixed with screws complete all as specified and as directed.

All as per item No 84.00 above but 100 mm complete all as specified and as directed.

S&F in repairs 25 mm dia powder coated aluminium alloy curtain rod complete all as specified and as directed.

S&F in repairs fancy type powder coated curtain rod bracket complete all as specified and as directed.

S&F aluminium powder coated three track sliding window with two or more shutters with & including 4 mm thick tinted glass, one shutter of stainless steel mosquito proofing with good quality bearing, handle, lock etc using PVC beading etc using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, as approved. fixing to stone masonary walls with & including Ist class teak wood plugs of size 20mmX20mm at an interval of 0.5m alround the track including drilling holes. (a) Frame bottom 20620 (b) Frame top & side 20681 (c) Shutters top & bottom 20844 (d) Shutter inter lock 20724 (e) Handle (Side ) for 20606 shutters, (e) Handle (side) for 20606 Shutters

All as per item No. 88.00 above but with provision of opening for AC complete all as specified and as directed by Engineer-in-Charge.

S&F aluminium powder coated single leaf door on pivots alongwith hydraulic door closer, door lock, handles, 5mm thick glass i panel and etc., fixed with rubber beading and glazing clips and using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, as approved all as directed by Engineer-in-Charge (a) Rectangular tube 14005 (b) Shutter vertical (c) Shutter top rail 19503 (d) Shutter Middle rail 060 (e) Shutter Bottom rail 19511 (f) Glazing clips 19352

S&F aluminium powder coated partition using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, as approved with 12 mm thick both side prelaminated particle board interior grade of approved colour in bottom panel and 5mm thick plain glass in top panel fixed with aluminium clips, beads, rubber gaskets etc., centre to centre distance of vertical member shall not exceeding 1mtr and horizontal member shall not exceeding 1.10 mtr using following aluminum section as specified in Jindal Catalogue complete as directed fixing to stone masonary walls with & including Ist class teak wood plugs of size 20mmX20mm at an interval of 0.5m alround the track including drilling holes. :- (a) SP – 20048 (b) DP - 20047 (c) Glazing clips - 19352

Dismantling of wrought iron of any description not otherwise provided for

M&L for MS structural steel work, framed as in trusses, purlins, rafter, post etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete all as specified and as directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa 150 GSM as in roof covering / cladding to wall, fixed with self tapping screws with matcheing ridge corrugation as specified incl dismantling of old sheet complete all as specified and as directed.

Removing of old water proofing treatment including screed bed and cleaning the surface of slab with wire brushes removing dust, foreign materials including flushing at junction of wall and removing the rubbish off the premises to a distance exc 500m complete all as specified and as directed.

Demolition of cement concrete in any position on roof slab and paving not exc 15cm thick (below or above roof slab) un-reinforced complete all as specified and as directed.

M & L Water proofing treatment to RCC roof slab, walls, chhajjas etc, shall be carried out as specified below and as directed by Engineer-in-Charge. (a) M&L for 10mm thick plaster screed bed layer in CM 1:3 on concrete surfaces. (b) Preparing plastered surfaces of roof slab, walls, chhajjas etc, by brooming with broom sweeping free from dirt dust etc & evenly applying a coat of approved bituminous primer @ 0.20 Kg/sqm of area complete all as specified. (c) Laying APP polymer modified approved membrane, 3 mm thick non woven, polyester, weighing not less than 3.5 Kg/sqm with laps & overlaps as specified & joints sealed and applied complete by torch application method all as specified & directed by Engr-in-Charge. Carrying out test by flooding water for 24 hrs for leakage & seepages and rectifying the same to the entire satisfaction of GE. (d) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/sqm on the top of membrane surfaces complete all as specified & as directed.

M & L for cement concrete 1:2:4 type B-1 using 20 mm graded stone agg as in leveling course of roof, chajja coving and base slab for tank complete all as specified and as directed.

Removing of existing water tank of capacity 500,1000 or 2000 Ltr setting aside (or lowering if required) for repair, cleaning etc and reconnecting & refixing in position after carrying out necessary roof treatment including necessary fittings and GI Pipes if required (NOTE : Necessary by pass arrangements for water supply is to be done by the contractor till completion of roof work.)

Removing building material exc. upto 1 km total distance including loading, unloading and stacking at the destination to a distance not exc. 5 KM complete all as specified and as directed.

S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trenches/floor.

Re-fixing 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trenches/floor complete all as specified and as directed.

S & F in repairs 110mm dia., PVC (SWR) bends any radius complete all as specified and as directed.

S&F Aluminium heavy duty hydraulic door closer ( 40kg to 60 kg ISI Marked) complete all as specified and as directed.

S&F aluminium heavy duty door closer fittied on floor (60 to 100 kg, ISI Marked) complete all as specified and as directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded brick aggregate) as in coving rounded, chamfered etc on sunken floor and weather proof course of roof treatment complete all as specified and as directed. (Note:-25mm thick PCC 1:2:4).

M & L for preparation of existing concrete surface of wall /floor cleaning dust etc including rendering 10mm thick cm 1:4 finished even and smooth using extra cement mixed with approved make WPC @ 3% wt of cement all as directed.

Dismantling of CI / AC/ PVC pipes of various dia jointed in CM or adhesive 75 to 100mm dia.

M & L Water proofing treatment to sunken slab, walls, etc, shall be carried out as specified below and as directed by Engineer-in-Charge. (a) Clean the sunken portion of toilet/Baths/WCs/Kitchen thoroughly removes laitance, dirt, dust etc. (b) Form angle fillet of size 40 mm x 40 mm along the junction of wall and floor using polymer modified mortar (“ Dr fixit” Pidicrete URP” or eqvt). (c) Sanitary pipes entering through walls and floor shall be sealed with “Dr Fixit Bathseal Tape” and the gaps to be grouted with non-shrink cementitous grout “Dr Fixit Bathseal Grout” or eqvt. Nahani traps etc to be fitted securely and the gaps around it to be grounted in the same manner. (d) Apply one coat of a Bitumen-modified polymer coating “Dr Fixit Bathseal Plus” or eqvt on all angle fillets by brush and cover it with 100 mm open woven mesh when it is “M & L for preparation of existing concrete surface of wall /floor cleaning dust etc all as directed by Engr-in-Charge.”still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely.

(e) In the remaining area, in dry substrate condition brush apply first coat of the same coating and further apply second coat when first is dry. Extend the coating upto 150mm above the FFI. Above FFI, another cementitious waterproofing waterproof coating “Dr Fixit Pidifin 2 K” or eqvt can be further applied right upto 2.1 m to waterproof the shower area also, if it is a bathroom or bath cubicles of a sanitary annex and apply second coat after 6-8 hours and allow to dry completely. (f) After 2 to 3 days, sunken portion must be overlaid with a 50 mm thick concrete screed M 15 type B0 mixed with integral WPC (Liquid) laid to stope 1:60 towards outer face of wall. Provide 40 mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 1:5:10 type E2.

M&L for PCC 1:5:10 type E2 (using 40 mm graded brick aggregate)lean concrete for filling sunkan floor etc. complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete as specified and directed.

S & F 3.0mm thick sheet glass ordinary quality in squares or rectingular exc 0.5 sqm each pane complete all as specified and as directed.

Anand Trading Co

M/s.BAJRANG CONSTRUCTION

Gauri Associates

REKHA ELECTRICALS

TULSAYA CONSTRUCTION

L.K.R.TIWARI CONSTRUCTION

Parhar Enterprise