REPAIR/MAINT OF JOINERY, SANITORY FITTINGS ,PLUMBING , ROOF TREATMENT ALLIED WKS UNDER ZONE-II OF AGE B/R-II UNDER GE (FW) KOLKATA

Amount

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc.4.00 Sqm each wooden all as directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm each all as directed.

Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 Sqm each all as directed.

S&F for 2nd class hardwood, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, moulded or chamfered, put together with glue, pinned at joints complete all as directed.

S&F 35mm thick Factory made 2nd class hard wood glazed & skleton shutters, open rebated and prepared to received glass, gauge etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section 8, clause 8.20(a) complete all as directed.

S&F Factory made 35mm thick with 2nd class hard wood, rail and style factory made plain framed panelled shutter(two panel) with lock, rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail & style as per IS:1003(Part-I) kiln seasoned and chemically pressure treated.

S&F Factory made solid PVC door frame (chowkhat) of size 50mmx47mm made out of 5mm plain colour wood grain PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube, S&F in opening as per specification & drg as per manufacturer instrutions.

S&F Factory Made Solid Panel PVC Door Shutter 30mm thick, consisting of frame made out of Mild Steel Tube of 19 Gauge thickness and size of 19mm x 19mm for Stiles and 15mm x 15mm for Top & Bottom Rails. Mild Steel Frame shall have a coat of Steel Primer of Approved Make and Manufacturer. Mild Steel Frame shall be covered with 5.0mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming Stiles and 5.0mm thick, 75mm wide PVC Sheets For Top Rail, Lock Rail & Bottom Rail on either side, and 10mm (5.0mm x 2) thick, 20mm wide Cross PVC Sheet as gap insert for Top Rail, Lock Rail & Bottom Rail. Panelling of 5.0mm thick PVC Sheet Beading on either side and joined together with Solvent Cement Adhesive, etc. An additional 5.0mm thick PVC Strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC Solvent Adhesive, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.

S&F in powder coated anodised aluminium doors frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.

S&F powder coated anodised aluminium doors shutters, aluminium section weighing 0.55 Kg/metre including necessary jointing cleats,glazing clips rubber packing handle 2 Nos in each door, hinges, Mortice lock vertical type size 100 mm 4 levers of brass in each door, anodised aluminium snap beading screws etc with 5.5 mm thick tinted glass ordinary quality as per manufactures instruction complete all as specified.

S&F powder coated anodised aluminium window and ventilator shutters, side hung type with sash bars, aluminium section weighing 0.55 Kg/metre including necessary jointing cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, anodised aluminum fittings such as suitable peg stays,hinges and handles-02Nos etc with 4mm thick tinted/frosted glass ordinary quality as per manufactures instruction complete all as specified.

S&F Powder coated anodised aluminium window grills fixed on aluminium section weighing not less than 0.55 Kg/metre including necessary jointing fittings etc all as per manufactures instruction complete all as specified.

S&F stainless steel wire cloth, 0.65mm nominal dia of wire and average width of aparture 1.40mm and fixed with stainless steel wire staples complete all as directed.

. - ditto - all as per item No. 13 here-in-before, but fixed in repair.

Hacking out old broken glass (any thickness and size or quality) from wooden frames glazed with putty or fixed with beads .

. - ditto - all asper item No. 15 here-in-before, but from metal frame.

S&F 3mm thick ordinary quality sheet glass/frosted glass and glazing with oil putty in square n.exc. 0.5 Sqm in each pane complete all as directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section.

. - ditto - all asper item No.18 here-in-before, but 200mm long all as directed.

S&F 300mm aluminium, anodised sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy all as directed complete all as directed.

. - ditto - all as per item No. 20 here-in-before, but fixed in repair.

S&F 100mm butt hinges stainless steel medium weight

. - ditto - all as per item No. 22 here-in-before, but 75mm.

S&F aluminium handle, cast type anodised 125mm size all as directed.

. - ditto - all as per item No. 24 here-in-before, but 150mm.

S&F steel window with side hung shutter including necessary hinges with steel handle and steel peg stay complete with glazing bars devotailed or welded all as directed.

Preparing new surface of wood or wood based material of any description and in any position not otherwise described n.exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed.

S&F 20mm dia fancy type chrominum plated dapery rod incl bracket and all fittings fixed on wall sample as approved by Engr-in-charge complete all as directed.

M&L in repair 19/20mm thick pre-laminated particle board as in cup board shutter double leaf one side decorative of sheds and other side balancing white lamination. All edgs properly sealed with 5mm thick 2nd class hard beading fixed with water resistant adhesive except rebate side which shall be of 25mm thick as in repair complete all as directed.

S&F Cast iron body Hydraulically door closer regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 in width and weight between 61Kg to 80 Kg and fixed inclding taking down old one all as directed.

S&F in repair drawer knobs 40 mm dia of brass polished fixed with nut screw and washer all as directed.

M&L in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass, other part made of mild steel heavy duty all as directed including taking down old one.

S&F in repair 30mm flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides.

S&F in repair pressed steel frames for doors of size 105 X 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, filled with PCC 1:2:4 type B-0 (12.5mm Graded aggregate) etc complete all as specified.

S&F in repair pressed steel frames for doors of size 125 X 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, filled with PCC 1:2:4 type B-0 (12.5mm Graded aggregate)etc complete all as specified.

S&F in repair for 300mm brass ordinary rat tail rod pattern springs including roller and roller plate complete all as directed.

S&F in repair of 2mm thick fibre glass reinforced transluent corrugated or plain coloured/printed sheeting with two corugation side lap fixed with coach screw and washer in roof , wall etc complete all as directed.

M&L in repair 18 to 20 mm thick black/coloured granite machine cut laid over 10mm thick screed bed in cement mortar 1:4 and jointed with grey or coloured cement to match with admixture of pigment to match the shade of granite including cutting polishing all as specified and as directed.

Demolition of cement concrete in ground floor and paving n.exc 15 cm thick below or above GL complete un re-inforced all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type 'C-2' (using 40mm graded crushed stone aggregate) as in sub base of concrete finished even and smooth without using extra cement complete all as directed..

M&L for 25mm thick PCC (1:2:4) type 'B-1' (using 20mm graded crushed stone aggregate) as in floor finished fair and even without using extra cement complete all as a specified and as directed

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as a specified and as directed

M&L mild steel work in tubular trusses including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS-1161:2014 grade St-240 complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordninary and counter sunk) forming holes, without any attachment all as specified rolled mild steel in stairs ( framed) including stringers, treades landing, balusters, hand rails etc including cleats, brackets etc complete all as specified and as direceted.

S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or froged into spikes framed guard bars, barred iron door ladders framed, blausters walk ways railing, framwork of water railing framework of water tanks and similar work con-forming to Fe 290 Gde -E-165etc complete all as specified and as directed by Engr-in-Charge.

Dismantling of Asbestos cement corrugated, semi-corrugated sheet in roof covering complete all as a specified and as directed

S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.

-ditto- but 0.50 mm thick coloured plain galvalume sheet as in ridge/valley gutter of roof.

M & L for 6 mm thick asbestos cement, corrugated sheet in roof, wall fixed with L type or J type hook complete all as a specified and as directed

Demolition of brick work built in cement mortar including all quions arches pillars etc but excluding ashlars facing,dressed stone work and precast concrete articles complete all as directed.

M&L brick work with sub class'B' fly-ash bricks, straight or curved on plan exc 6m radius buit in cement mortar 1:6 complete all as a specified and as directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key and scrubbing down with water complete All as specified and as directed.

M&L 15mm thick cement plaster on brick or concrete walls finishing fair and even in cement mortar 1:6 complete all as a specified and as directed

M&L 15 mm thick cement plaster in cement mortar (1:4) on fair faces of brick work incl finished even and smooth without using extra cement complete all as a specified and as directed

M&L 5mm thick cement plaster on ceiling surfaces without using extra cement finishing fair and even in CM 1:3 including necessary scaffolding complete all as a specified and as directed

Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing tiles from site and rubbish off the premises complete all as specified and directed.

M&L Non Skid joint free coloured tiles 7-8mm thick area of each tiles exc 0.11 sqm but n.exc0.18sqm (400X400X7-8mm), as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and incl 15mm thick screed bedding in cement mortar 1:6 complete all as a specified and as directed

M&L Non Skid joint free coloured tiles 7-8mm thick area of each tiles exc 0.06Sqm but n. exc 0.11 sqm (300X300X7-8mm), as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and incl 15mm thick screed bedding in cement mortar 1:6 complete all as a specified and as directed

M&L coloured glazed ceramic tiles in vertical surfaces 450X300X7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, fixed over and incl 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M & L Virified ceramic coloured (light shade) tiles, 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade laid over and incl screed bed 20mm thick cement mortar 1:6 complete all as a specified and as directed

Labour of Stripping of old tarfelf of any description carefully from the roof surface (without damage of roof) and removing from site as directed including roughening surface of old concrete roofing by picking, sweeping, cleaning and washing down with the water to remove dust as directed.

Supplying and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt laying over a coat of bituminous primer @ 0.40 Ltr / Sqm and two coats of Bitumen based UV reflective paint with aluminium finish over APP membrane. The membrane shall be laid using butane torch and sealing all joints etc all as specified in Para 11.44.5 of SSR Part I complete all as specified and as directed.

S&F in repair 4mm thick design `E' board of size 600x600mm incl aluminium snap grid made of aluminium main `T' 38x25x2mm thick and cross Tee and angle of section 24.5x24.5x1.4mm thick incl proper hanging arrangement (with 4mm dia galvanised iron wire and suitable adjuster) and incl applying two coat of acrylic distemper complete all as a specified and as directed.

S&F floor door stopper of aluminium alloy body and tounge, anodised, with hard drawn steel spring, fixed in floor. 150mm overall length of cover plate complete all as a specified and as directed

S&F in repair Chromium plated brass Pillar tap, fancy type. with areator, fixed to wash hand basin, complete all as specified and directed. (Make : Ess Ess, Cat No: C-201B / JAQUAR, Cat No: CON-021KN/ PARRYWARE, Cat No: G1402A1 / PRAYAG, Cat No: 9204/ HINDWARE, Cat No: F330002CP / Cera, Model: OCEAN)

S&F in repair Chromium plated brass Bib cock with wall flange, fancy type, long body, fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : Ess Ess, Cat No: C-209 / JAQUAR, Cat No: CON-107KN/ PARRYWARE, Cat No: G1405A1 / CERA, Model : OCEAN / PRAYAG, Cat No: 9208 /HINDWARE, Cat No: F330041)

S&F in repair chromium plated brass over head shower rose with arm (premium quality), with 3 flow, fixed to 15mm bore of iron pipe including taking down existing shower complete all as specified and directed. (Make : CERA, Cat No: F7040103 (for arm) & F7020305 (for shower) / PARRYWARE, Cat No: T9802A1 (for arm) & T9986A1 (for shower)/ESS ESS, Cat No: OH-104A / HINDWARE, cat No: F160051)

S&F 15mm bore chromium plated central hole basin mixer (premium quality) without popup waste system with 450mm long copper pipe and brass nut, complete all as specified and directed. (MAKE : ESS ESS, Cat No : C-211A / JAQUAR, Cat No : CON-167KNB / PARRYWARE, Cat No: G1414A1 / CERA, Model: OCEAN / PRAYAG, Cat No: 9250 / HINDWARE, Model: CONTESSA PLUS)

S&F in repair, 15 mm bore fancy type stop valves, cast copper alloy, chromium plated (concealed type), screwed down, high pressure, with crutch or butterfly handle, incl concealed body, screwed both ends for iron pipe or for unions and, complete all as specified and directed. (MAKE : JAQUAR, Cat No: CON-083FTK / PARRYWARE, Cat No : G1461A1 / ESS ESS, Cat No: T-108 / CERA, Model: OCEAN / PRAYAG, cat No: 9218/ HINDWARE, Cat No: F330052)

Supply and Fixing in repairs, Tubular towel rail (premium quality), 20mm dia, 600 mm long between flanges including brass chromium plated, complete all as specified and directed. (MAKE : JAQUAR, Cat No : ACN-111SM / PARRYWARE, Cat No : T6401A1 / ESS ESS, Cat No: AC-101 / CERA, Cat No: F5004103 / HINDWARE, Cat No: F890011)

S&F in repair sinks with drainage board made of stainless steel 1 mm thick in kitchen with plug washers, waste coupling and fixing cantilever brackets connecting union to pipe, overall size of sink 914 mm x 460 mm and bowl size 405 mm x 354 mm x 203 mm complete including taking down existing sink complete all as specified and directed. (MAKE : PRAYAG, Cat No. 1239-D or equivalent model in NIRALI / DIAMOND / ANJALI / JAYNA / BLUE STAR / CERA / PARRYWARE)

S&F in repair Stainless steel kitchen rack of size 31" x 24" x 10" fixed in wall with screws and washer including taking down existing rack complete all as specified and directed. (MAKE : PRAYAG, Cat No : P-340 or equivalent model in SUYOG / BLUE STAR / ANUPAM INDUSTRIES)

S&F in repair CP grating 100mm size fixed with white cemnt complete all as directed.

S&F in repair acrylic bathroom cabinet box with mirror of size 622 mm X 422 mm size complete all as specified and directed. (MAKE: PRAYAG, Cat No: 555 or equivalent model in POLYTUF / JEXON / SHAKTI / NILKAMAL )

S&F in repair Chromium plated brass Angular stop cock, fancy type, concealed type with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No: CON-59KN / PARRYWARE, Cat No: G1453A1 / ESS ESS, Cat No: C-206 / CERA, Model: OCEAN / PRAYAG, Cat No: 9210 / HINDWARE, Cat No: F330043)

S&F Low density polyethylene pipe connection, comprising of 15 mm dia 450 mm long having PTMT union at each end of connection to each of pillar tap/cistern/stop cock/urinal etc. at one end, stop cock at other end complete all as specified and directed. (MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 or equivalent model in SHAKTI / JEXON / CERA)

S&F 15mm bore heavy duty PVC connector pipe of length 600mm with PTMT coupling at both ends, screwed down for pipe as directed. (MAKE : PRAYAG, Cat No. 324 / POLYTUF, Cat No. 4004-D / SHAKTI, Cat No: SB 1324-D)

S&F in repair PVC waste pipe 32mm dia for WHB/kintchen sink fixed complete all as specified and directed.

S&F in repair Plastic seat cover in white or any colour of EWC with flat bottom incl hinging device complete all as specified and directed.

S&F in repair Chromium plated brass Towel ring (premium quality) complete all as specified and directed. (Make : Ess-Ess, Cat No: AC-502 / JAQUAR, Cat No: ACN-1121BN / PARRRYWARE, Cat No: T6002A1 / CERA, Cat No: F5002105/ HINDWARE, Cat No: F880007)

S&F chromium plated brass jet spray with one metre PVC tube complete all as specified and directed . (Make : Essco, Cat No ALE-547/PRAYAG, Cat No: BEA-17 / JAINKO, Cat No: JSJ-1 or equivalent model in GEM / PARKO / LAURET / AQUEL)

S&F CP bottle trap with internal portion 32mm size with 190mm long wall connection pipe complete all as specified and directed (Make: JAQUAR, Cat No: ALD-769L250x190 / ESS ESS, Cat No: C-231C / HINDWARE, Cat No: F850003 / CERA, Cat No: F8060302/ PRAYAG, cat No: BEA-26)

S&F in repair White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float, flush pipe and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed including taking down/out unserviceable Flushing Cistern and connected items complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART or equivalent model in COMMANDER )

Repair only to flushing cistern incl cleaning and replacement of washer and syphonage of suitable size if required complete all as specified and directed.

S&F in repairs vitreous china (coloured) wash down water closet pan (pedestal pattern) with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed. (Make : Parryware, Model : Elite / JAQUAR, Model: Continental / CERA, Model: Conventional / HINDWARE, Model: SLICK)

Taking up or down steel water tubing 15 mm bore incl connection , cleaning etc

.-ditto all as per item her in before but 20 mm bore

. - ditto - all as per item here-in-before but 25mm bore.

S&F tubes 15mm bore medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors.

. - ditto - all as per item here-in-before but 20mm bore.

. - ditto - all as per item here-in-before but 25mm bore.

Refixing old steel tubing 15mm bore and connection in new or old position(wall, ceiling, floor etc.).

. - ditto - all as per item here-in-before but 20mm bore.

. - ditto - all as per item here-in-before but 25mm bore.

Supply, hoisting and fixing rotational moulded polyethylene water storage tank (cylindrical vertical type with closed top) of capacity 1000 Litres, multi-layered (ISI marked), with GI tank nipple & cover, hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

. - ditto - all as per item here-in-before but 2000 ltrs capacity.

. - ditto - all as per item here-in-before but 500 ltrs capacity.

S&F in repair 32mm Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and directed. (Make: PRAYAG, Cat No: 103 or equivalent model in JEXON / POLYTUF / SHAKTI)

S&F in repair CP waste coupling for stainless steel sink complete all as specified and directed. (Make: PRAYAG, Cat No: BEA-11 / JAQUAR. Cat No: ALD-705/ CERA, Cat No: F8050101)

S&F in repair swan neck pillar cock 15mm dia chromium plated cast copper alloy with round spout left hand knob operating screwed for iron pipe etc complete all as directed (MAKE :ESS ESS, Cat No : C-210 / PARRYWARE, Cat No : G3403A1 / JAQUAR, Cat No: CON-123BKN / CERA, Cat No: F3002104 / HINDWARE, Cat No: F330012)

S&F in repair Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, making good disturbed Surfaces in Cement Mortar 1:3 including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and directed. (MAKE : PARRYWARE, Cat No. C0406 / HINDWARE, Cat No. 10010 / JAQUAR, Cat No. CNS-WHT-801 / CERA, Cat No: S2040141)

S&F in repair chromium plated Hand shower (health faucet), brass body with 1.2 metre long flexible tube in chrome finish with wall hook complete all as specified and directed. (MAKE : JAQUAR, Cat No : ALD-573/ PARRYWARE, Cat No : T9941A1 / ESS ESS, Cat No: C-232D / CERA, Cat No: F8030401AB / HINDWARE, Cat No: F160002)

Supply and Fix in repair vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including making good to floor, complete all as specified and directed. (MAKE : PARRYWARE, Cat No. C0117 / HINDWARE, Cat No. 20004 / JAQUAR, Cat No. CNS-WHT-OP01 / CERA, Model: COVY)

S&F in repair PVC tank cover for 500 Ltrs PVC Tank complete all as specified and directed.

S&F in repair PVC tank cover for 1000 Ltrs PVC Tank complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes, 100 mm bore, jointed in cement mortar and taking out of trenches, complete all as specified and directed.

S&F spun pipes Cast iron soil, waste and vent pipes, 100mm in any length with or without ears, with cement joints, laid in trenches or in floors as specified (ISI Marked) complete all as specified and directed.

S&F spun pipes Cast iron soil, waste and vent pipes, 75mm in any length with or without ears, with cement joints, laid on wall fixed in clamps as specified (ISI Marked) complete all as specified and directed.

S&F CI bends for 100mm pipe (any radius) diminishing piece or tapers (large bore measured) complete all as specified and directed.

S&F CI bends of 100mm dia with ducks foot or heel rest (ISI Marked) complete all as specified and directed.

S&F CI branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parellel branches, for 100mm dia pipe complete all as specified and directed.

S&F 100mm bore cast iron cowls complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

Taking down plants/vegetaion from wall upto roof level by means of cutting holes into brick wall and making good the surfaces of dismantling portion n.exc 150Sqcm superficial area and n.exc on brick deep by PCC 1:3:6 type C1 , and plastering in CM (1:4) of disturb portion and applying two coats of cement based paint to match the existing surfaces height upto 4th floor complete all as specified and directed.

-ditto- all as per item No 122 but for height 5th to 8th floor.

-ditto- all as per item No 122 but for height exc 8th floor.

M&L for applying one coat of oil bound distemper to old decorated surfaces of wall including preparation surfaces (by brooming down steel wire brushing scrapping down smoke soot, moulds, moss, effoloresent, salts trading oil and greasy spots etc) complete all as specified and as directed by Engineer-in-Charge.

M&L for applying one coat of oil bound distemper to old decorated surfaces of ceiling including preparation surfaces complete all as specified and as directed.

M&L for complete removal of existing treatment of wall and applying two coats of oil emulsion distemper over a layer of 1 mm thick putty for neat and smooth finishing complete all as specified and directed.

M&L for applying one coat of white wash to old decorated surfaces of wall including preparation surfaces complete all as specified and as directed.

M&L for applying one coat of white wash to old decorated surfaces of ceiling including preparation of surfaces complete all as specified and as directed.

M&L for applying one coat of synthetic enamal paint on old treated wooden surfaces of any description over 10cm width or girth including cleaning and preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for applying one coat of synthetic enamal paint on old treated steel surfaces of any description over 10cm width or girth including cleaning and preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

M&L Removal of existing treatment and applying two coats of plastic emulsion paint over a coat of primer to old decorated surfaces of wall complete all as specified and as directed by Engineer-in-Charge.

M & L for preparation of old decorated surfaces and applying one coat of cement base paint on wall surface complete all as specified and directed.

M&L for repair to steel window including welding, binding of steel section, repair to hinges, fixing of stay and handles etc n.exc 1.5 sqm complete all as specified and directed.

Ditto as per item above area exc 1.5sqm but n.exc 4.00sqm complete all as specified and directed.

S&F in repair 2 lever brass lock, cupboard grade 1, 50mm size complete all as specified and directed.

S&F in repair 6 lever brass type Mortice lock vertical type size 100mm complete all as specified and directed.

S&F in repair 1mm thick sunmica, fixed to ply wood with suitable adhesive complete all as specified and directed.

Disconnecting existing water storage Tank of capacity exceeding 1000 litres but not exceeding 2000 liters for cleaning of water tank, removing of mud, sludge etc and flushing with chlorine water including supply and fixing of any damaged accessories for water Tank and writting MES No, Unit Name (With capital letter, not exceeding 15cm height and not exceeding 10ms each tank ) and re-connecting and refixing all connections complete all as specified and directed.

Disconnecting exiting water storage Tank of capacity exceeding 500 litres but not exceeding 1000 liters for cleaning of water tank, removing of mud, sludge etc and flushing with chlorine water including supply and fixing of any damaged accessories for water Tank and writting MES No, Unit Name (With capital letter, not exceeding 15cm height and not exceeding 10ms each tank ) and re-connecting and refixing all connections complete all as specified and directed.

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (MAKE : PRAYAG, Cat No. 152 or equivalent model in JEXON / POLYTUF / SHAKTI)

S&F 25 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (MAKE : PRAYAG, Cat No. 153 or equivalent model in JEXON / POLYTUF / SHAKTI)

M&L Preparing new Surfaces of wall and applying Two coats of Acrylic Distemper over a coat of alkali resistant primer complete all as specified and as directed.

M&L Preparing new Surfaces of wall and applying Three coats of white wash complete all as specified and as directed.

M&L Preparing new Surfaces of wall and applying Two coats Cement base paint over a coat of primer complete all as specified and as directed.

S&F in repair 15mm bore chromium plated two way bib cock with flange, fancy type as directed. (Make : Ess Ess, Cat No: C-203 / JAQUAR, Cat No: CON-041KN/ PARRYWARE, Cat No: G1434A1 / CERA, Model : OCEAN / PRAYAG, Cat No: 9212/HINDWARE, CAT No: F330004CP)

S&F 100 mm Brass handle cast type polished bright complete all as specified and as directed.

S&F brass knobs 35-40 mm dia complete all as specified and as directed.

JOY RAM ENTERPRISE

BASU AND CO

JOY-EN-JOY

PRABIR TRADERS

IDEAL TRADERS

GHOSH ENTERPRISE

DEYS ENTERPRISE