SPECIAL REPAIR TO OTHER THAN RANKS MD ACCN BLOCK NUMBER P-940/1-6 and P-941/1-6 AT KARTAR SINGH ENCLAVE AT PATIALA UNDER GE (SOUTH) PATIALA

'Notes: (i) Please refer Schedule 'A' Notes of tender documents.

Taking down cement plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for cement plastering 10mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for cement plastering 5mm thick in cemet mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Complete removal of existing treatment of any type/description from ceilings/RCC surfaces etc with mechanical means/grinder complete all as specified and directed.

Complete removal of existing treatment of any type/description from walls/RCC surfaces etc with mechanical means/grinder complete all as specified and directed.

M&L preparation of newly plastered surfaces of wall and applying two coat of OBD over a coat of primer complete all as specified and directed.

M&L preparation of old plastered surfaces of wall and applying two coat of OBD complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying three coat of white wash on wall surfaces complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling and applying two coat of white wash on wall surfaces complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coat of white wash on ceiling surfaces complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old steel surfaces of any description, over 10 cm width or girth and applying one coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing , complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joining together with solvent cement, supplying & fixing in the frame at site as per specification & drawing along with necessary aluminium mongaries for fixing of door, complete all as specified and directed. (a) Stainless Steel (304 Grade) Butt Hinges 150mm - 3 nos per leaf (b) Aluminium Tower Bolt 150mm long - 2 nos per leaf (c) Aluminium Handles 150 mm - 2 nos per leaf

S&F of Pressed steel frames of size 105x60mm made of MS sheet of 1.20 mm thickness for doors with one rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified and incl cutting holes and making good reqd to disturbed surfaces complete incl cement 1:2:4 type B-1 using 20mm graded stone aggregate as in holdfasts blocks/filling inside chawkhats and making good to disturbed surfaces complete all as specified and directed.

S&F of Pressed steel frames of size 125x60mm made of MS sheet of 1.20 mm thickness for doors with double rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified and incl cutting holes and making good reqd to disturbed surfaces complete incl cement 1:2:4 type B-1 using 20mm graded stone aggregate as in holdfasts blocks/filling inside chawkhats and making good to disturbed surfaces complete all as specified and directed.

S&F factory made flush shutters 35mm thick minimum 5 ply, solid core construction, with block board core and plywood face panels, commercial type on both sides with 6mm thick lipping frame to complete all as specified and directed.

M&L for refixing with welding in same opening old steel wire mesh shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.

M&L for Aluminium anodised tower bolt of 200mm extruded section and fixed complete all as specified and directed

S&F stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf complete all as specified and directed

S&F stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf complete all as specified and directed

S&F stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf complete all as specified and directed

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate including fixing like welding etc complete fixed all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings,balconies, canopies,deck slabs and in shelves and the like. complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs,floor slabs,landing and similar work not exceeding 200mm thick (Horizontal or slopping) complete all as specified and directed

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers ,lintels, cantilevers,shelves including supports overhangs etc. also splays between floors and beams etc complete all as specified and directed

M&L for providing and fixing in position Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for providing and fixing in position Mild steel bars , but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Demolition of cement concrete un -reinforced of any description and in any position complete all as specified and directed.

M&L for plain cement concrete 1:7:12 mix, type E-2 (using 40mm graded Brick aggregate) as in filling of sunken portion complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:3 , mixed with water proofing compound, on brick or concrete surfaces of wall of sunken portion, trowelled to even and smooth finish without using extra cement with WPC paid and measured separately complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) and applying bitumen 85/25 grade @ 0.1.20kg/sqm over 0.30 kg/sqm bitumen primer and landed APP membrane on primed surface by Torch application complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in floor finished rough to recieve floor finishes and sunken floor etc complete as specified and directed.

M&L for providing 25 mm dia GI pipe medium grade spouts 60 cm long complete all as specified and directed.

S&F in repair for 4mm thicck Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repair frosted glass 4.0mm thick ordinary quality and glazing with oil putty to steel window and with wooden beads to wooden shutters in square not exc 0.5 sqm in each pane complete all as specified and as directed. (Note : The rate quoted to include fixing of glass panes upto 3rd floor including taking down)

S&F in repair stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets/finials fency type, stops fixed with ss screws etc complete all as specified & directed. Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered.

Supply and fixed in repair brass chromium plated, tubular towel rail, 20mm dia, 60cm long between flanges complete all as specified and directed.

S&F stainless steel sink with drainage board, 1.00 mm thick, glossy finish, for kitchen with plugs washers and waste coupling of 32mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x460/928mmx458mm with bowl size 410x 355x185mm/ 430x355x200 with wall connection pipe & wall flange and making good disturbed portion in CM 1:3 or PCC 1:2:4 complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed

Demolition of cement Concrete (unreinforced) in floors & pavings not exceeding 15 cm thick above or below ground level complete all as specified and directed.

M&L for PCC type C-2, (1:3:6) using 40mm graded stone agrregate as in sub base of floors or mass concrete etc complete all as specified and directed.

M&L for granite 18-20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for rounding to edges of stone (of any description) slabs one edge, such as in steps, cooking platform, and other similar situations including cutting, rubbing and polishing (mirror finish), complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick polished, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc over and including 15 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L for Non-skid Ceramic tiles 7 to 8 mm thick polished, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirtings etc over and including 10 mm thick rendering in cement mortar 1:4. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified and directed.

M&L for anti-skid premium quality coloured tiles 400 X 400 mm and 7-8 mm thick, as in floors, steps, cills etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 15 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

Material & Labour for glazed coloured ceramic tiles in vertical surface 600 x 300 x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles laid/ fixed over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed and directed.

S&F overhead shower 125mm dia with 235mm long shower arm and incl all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description/size complete in all respect all as specified and directed.

S&F 15 mm dia Bib Tap cast copper alloy fancy type CP with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair brass chromium plated wall mixer for bathroom 3-in-1 bend per vision for shower head with brass CP wall planger fixed in repair for 15 mm base pipe as union complete all as specified and directed.

S&F in repair Concealed Stop Cock, fancy type, CP with long shank and cup, exposed part kit with wall flange, fitting sleeve, operating lever, adjustable wall flange and including regular brass body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified and directed.

S&F in repair Sink Mixer wall mounted with swinging spout and with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed.

S&F Angular Stop Cock, CP, fency type with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified and directed.

S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) P trap with long arm white/ivory including connection to drain (or out going pipe) and with flush pipe 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of high density PVC pipe (pressure rating 6 kgf/sq.cm) brench peace length as required so that joint is avoided inside the wall and outlet straight away come out of wall in all floors except G.F.and taking down existing of any description/size complete in all respect all as specified and directed.

S&F in repairs vitereous china wash hand basin, white, flat back of size 550 x 400 mm with pedestal including, coupling, waste pipe, brackets, cutting for pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F PTMT Jet Spray with 1.5 metre long flexible tube including making connections and fixed in position complete in all respect as specified and directed.

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc for fixing, packing and taking down existing of any description/size complete all as specified and directed.

S&F doubled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 500 Ltrs capacity hoisted and fixed in position all as specified including ball brass valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect CPVC to PVC tank incl taking down existing complete all as specified and directed.

S&F 25mm bore CPVC, globe or gate valves, with long handle for better grip and effortless rotation, allowing smooth on/off control even in tight spaces, screwed both ends for CPVC pipe and fixed in repair complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F stainless steel grating 150x150 mm size square shaped with cockroach trap for floor trap fixed in position complete all as specified and directed.

Taking down eaves, PVC sewage pipe, gutters and rain water pipes (any sizes or pattern) incl all fittings head, shoes, bend, swan neck etc incl cleaning for refixing or removing to store complete all as specified and directed.

S&F PVC(SWR) pipe, 110 mm bore, single socketed in any length with rubber ring joints using solvent as per maunfacture instruction, fixed to walls with MS flat iron clamps of size 25 x 3mm, bolts, washers, nuts, nails etc, complete all as specified and directed. Note: flat iron clamps will be measured and paid separately in respected item.

M&L for providing and laying 110mm dia UPVC soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors and making necessary connections complete all as specified and directed including taking down of existing unserviceable pipe.

S&F PVC(SWR) bends (any radius), for 110mm bore pipes, with access doors, complete all as specified and directed.

S&F PVC (SWR) junction double,(double T), equal or unequal with access door for 110 mm bore complete all as specified and directed.

M&L for providing & fixing in position UPVC floor trap 100mm dia, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) in repair complete all as specified and directed.

S&F PVC bend duck foot or heelrest, radius for 100mm bore pipe, as in repairs, complete all as specified and directed.

S&F PVC nahani trap incl jointing to waste pipe in neat cement 100mm dia fixed in cement concrete (1:2:4) type B1 complete all as specified and directed.

S&F for PVC cowl of 110mm dia complete all as specified and directed.

M&L for providing and fixing in position PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cemen type 'P' grating complete all as directed and specified.

Taking down existing plaster from brick work or concrete surface and proper cleaning the surface with water and making for efforescence treatment by applying two coats of smart care damp proof coating and applying 15 mm thick plaster with CM 1:4 mixed with URP (301) over treated surfaces complete all as specified and directed. Note : The complete item shall be got executed through the authorised applicator of manufacturer only and complete all as directed. Contractor shall be liable to get the applicator approved from the GE before execution of work.

Taking up or down existing steel tubing and connections,15mm bore complete all as specified and directed.

Taking up or down existing steel tubing and connections, 20 mm bore complete all as specified and directed

Supplying and laying of 20mm outer dia CPVC pipes SDR11 with including all necessary brass CPVC SDR 11 fittings on walls and ceilings or laying in floors complete all as specified and as directed.

Supplying and laying of 25mm outer dia CPVC pipes SDR11 with including all necessary brass CPVC SDR 11 fittings on walls and ceilings or laying in floors complete all as specified and as directed.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed Conduit(TV/Tele Socket) etc., and making good, cutting not exc 10cm girth and complete all as specified and directed.

S&F CP peg set of 6 hooks and including all accessories like screws etc as recommended by manufacturer and complete fixing in position all as specified and directed.

S&F acrylic glass shelf assembly for soap dish and appropriate space for placing other things like tooth brushes comb tooth paste etc and fiexed to walls with plug and brass chromium plated screws complete all as specified and directed.

S&F Stainless steel plate rack made out of 1 mm thick stainless steel sheet of size 600x600x250mm complete all as specified and directed.

Dismantling of boarding of any type/size as in CB/wardrobes or fixed in any position in hardware (if any) etc complete all as specified and directed.

S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE WPC board ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.

S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE WPC board of single side rigid laminate of approved color and other side plain white colour fixed with ss screws and solvent cement/ adhesive to make kitchen/bed rooms cabinet shutters and shelves complete as per manufacturer’s instructions complete all as specified and directed.

S&F 5 mm thick with min density 600 Kg/cu.m LEAD FREE WPC board of single side rigid laminate of approved color and other side plain white colour and pasted with solvent cement/ adhesive on frame work of cup boards complete as per manufacturer’s instructions complete all as specified and directed.

S&F Piano/continuous hinge of size 19 mm stainless steel complete all as specified and directed.

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs. complete all as specified and directed

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished complete fixed in position all as specified and directed.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified and directed.

M&L for providing and fixing factory made extruded aluminium casement windows (with provision for cooler) with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf and incl hook and eye. Note: complete shutter window will be treated as single uit and paid as single unit

M&L for Providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect as specified and directed.

S&F Factory made aluminium 50 micron powder coated grill, opening size 101.6X63.5 mm (4''X2.5'') and of apporox weight @1.345 Kg/Sqm complete fixed in position in windows in all respect as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete incl fixtures and fittings suze as swithes, ceiling rose, pendant, regulator, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (Credit for above items should be as per conditions separately) and making good disturbed surfaces of walls, floors etc. complete all as specified and directed.

M&L for point wiring (using approved colour coding as per IS) with 1100 volts grade, stranded copper conductor 1.5 Sqmm (nominal area), FRLSH, PVC insulated and unsheathed cable IS 694 marked TEC and FIA approved and including PVC concealed medium grade conduit(thickness not less than 1.5mm and 20 m dia) and its fittings ISI marked PVC junction boxes terminated in sunken/pressed metal flush box for mounting of modular switches/sockets/fan regulators and white cover plate with frame, also including FRLSH PVC insulated unsheathed stranded copper conductor 1.5 Sqmm (nominal area) 1100 volts grade, copper conductor cable as earth continuity conductor to common earth and connected to earth dolly including necessary cutting/chases complete all as specified and directed by Engineer-in-Charge for the following (Switches and regulators shall be measured and paid for separately.) ( Wiring shall be done as per colour code in IS for phase, neutral and earth and no loop of earth and neutral wire shall be accepted in the point wiring, the same will move from switch board ) ( the cost of Modular cover plate, Blank plate and metal flush boxes is included in the unit rate quoted for this item) Note :Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost.

One light point controlled by one way switch complete all as specified and directed.

One ceiling fan /Exhaust fan point controlled by one one way switch complete all as specified and directed.

One bell/buzzer point controlled by one push button complete all specified and directed.

One 3/5 pin socket outlet 5 Amp on the same board with other swithes complete all specified and directed.

One 3/5 pin 5 Amps socket outlet on indepandant board complete all specified and directed.

One light point controlled by two way switches complete all specified and directed.

All as per item No 101 above here in before but with 2.5 Sqmm (nominal area) FRLS cable PVC for the 15 Amp 3/5 pin socket power point including 2.5 Sqmm copper conductor green as colour for earth continuity complete all specified and directed.

S&F in replacement of modular switch single pole one way 5/6 Amps, one module complete all specified and directed.

S&F in replacement of modular switch single pole one way 16 Amps, one module complete all specified and directed.

S&F in replacement of modular switch single pole two way 5/6 Amps, one module complete all specified and directed.

S&F in replacement of modular type, socket 6 Amps, 2/3 pin combined 2 module complete all specified and directed.

S&F in replacement of modular type, socket 6/16 Amps- 2/3 pin combined 2 modular complete all specified and directed.

S&F modular type, Bell push 1 way, 6 Amps, 1 module complete all specified and directed.

S&F Bell electric AC 230 Volts single pole ding dong type complete all specified and directed.

M&L for moudular Ceiling rose in poly carbonate 3 terminal brass flush type 6 Amps,250 volts AC ISI marked, fixing on 3 mm thick sunmica hylum plastic laminated round sheet 75mm dia complete all specified and directed.

Supply & Fixing Inreplacement of old unserviceable modular fan regulator 230 volts , 120 watt, step type (5 step) socket type, complete all specified and directed.

Supply & Fixing modular Angle holders (metal ring) PVC / polycarbonate type with back plate, fixing on 3 mm thick sunmica hylum plastic laminated round sheet 75mm dia complete all as specified and directed.

S&F in replacement of old unserviceable light fittings and S&F LED tube light fitting 1x20 Watt industrial batten type with bipin holders connector block complete with all accessories internally prewired and incl connecting up three core single wire incl 01 no. 20 watt retrofit LED tube rod T8 polycabonate complete all as spd and directed .

Supply & fix in LED mirror light with Linear & compact 10W mirror light with decorative grey end caps, polycarbonate body and ribbed opal diffuser of capacity 10 watt complete all specified and directed.

Taking down sub main wiring and S & F Sub main wiring with two runs of single core FRLS PVC insulated and unsheathed multistranded, copper conductor cable of size 6.0 sqmm LT, 1100V grade, down trhough and incl adequate sizes PVC non metallic medium grade conduit of 25mm/approprite dia with accessories and fittings and one run of 6.0 sq mm single core multi stranded copper conductor cable as earth continuity conductor. Two runs of cable one run of earth wire and one run of PVC non metallic conduit of 25mm/approprite dia shall be measured as one run length, Cable required for connection to DBs shall deemed to be incl and shall not be measured separately. Earth wire shall run inside the conduit pipe complete all specified and directed. Note :- Extra length of cable required for connection to MCBs shall deemed to be included in unit rate.

Please Enable Macros to View BoQ information