Retrofitting work including water proofing and fabrication of PEB Prefab structure at Rail Neer Plant, Ambernath, Mumbai, Maharashtra

S.NO. DESCRIPTION Amount

1 Civil & Miscellaneous ₹ 28,796,181.95

2 Sanitary ₹ 581,225.70

3 Electrical ₹ 2,082,691.00

5 AV & Furniture ₹ 4,710,116.50

6 PEB Structure ₹ 8,392,988.00

Total Amount Including GST ₹ 49,834,967.00

Total Amount Including GST ₹ 49,834,967.00

Digitally signed by AMIT

Repair and renovation of IRCTC Railneer Plant at Kakole, Ambernath

Sr. No. DSR/NDSR Description Unit Quantity Rate Amount

1.0 15.2 Demolishing cement concrete manually/ by mechanical means including disposal of material within

50 metres lead as per direction of Engineer - in - charge.

1.1 15.2.1 Nominal concrete 1:3:6 or richer mix (including equivalent design mix)

2.0 15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal

of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

3.0 15.7 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and

disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

4.0 15.12 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats,

architrave, holdfasts etc. complete and stacking within 50 metres lead :

4.1 15.12.1 Of area 3 sq. metres and below

4.2 15.12.2 Of area beyond 3 sq. metres

5.0 15.19 Dismantling steel work manually/ by mechanical means in built up sections without dismembering

and stacking within 50 metres lead as per direction of Engineer-in-charge. Kg 1000.00 3.85 3,850.00

6.0 15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50

6.1 15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 3891.00 73.40 285,599.40

7.0 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including

disposal of rubbish to the dumping ground within 50 metres lead. Sqm 2328.00 54.65 127,225.20

8.0 15.27 Demolishing mud phaska in terracing and disposal of material within 50 metres lead.

9.0 14.5 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

9.1 14.5.2 Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm)

10.0 15.60 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by

mechanical means, including loading, transporting, unloading to approved municipal dumping ground

or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along

crack line including drilling of holes of required diametre (20mm to 30mm) up to depth from 30mm to

11.0 26.39 80mm at required spacing and making the hole & crack dust free by blowing compressed air, sealing Each 400 236.90 94,760.00

the distance between injection nipple with adhesive chemical of approved make and allow it to cure

complete as per direction of Engineer-In-Charge

Digitally signed by AMIT

Providing and injecting approved grout in proportion recommended by the manufacturer into

12.0 26.35 cracks/honey-comb area of concrete/ masonry by suitable gun/pump at required pressure including

cu ng of nipples a er curing etc. complete as per direc ons of Engineer-inCharge

Stirrer mixed Acrylic Polymer of approved make @ 2% of weight of cement used) modified Cement

slurry made with non shrink compound in concrete/RCC work

12.2 26.35.3 Epoxy injection grout in concrete/RCC work of approved make Kg 170 553.40 94,078.00

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592

13.0 12.41 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal

expansion, (i) Single socketed pipes

For Roof Grading -

Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per

14.0 26.31.1 specifications and direction of Engineer-In-charge complete in all respect. Sqm 900 141.2 127,080.00

26.31.1 SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement

per sqm of surface area mixed with specified proportion of approved polymer

Grading roof for water proofing treatment with

15.1 22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) Cum 25 8042.30 201,057.50

Providing and laying in situ seven course water proofing treatment with APP (Atactic poly-propylene)

modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per

sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type

bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified

Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with

centre core as 20 micron HMHDPE film sandwiched on both sides with polymeric mix and the

polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer

shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1cement : 3

fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer

of cement mortar 1:3 (1cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid

for separately).

Providing and laying in position cement concrete of specified grade excluding

17.0 4.1 the cost of centering and shuttering - All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded

17.1 4.1.3 stone aggregate 20 mm nominal size derived from natural sources) 100 7,878.50 787,850.00

Digitally signed by AMIT

Extra for providing and mixing water proofing material in cement concrete work

in doses by weight of cement as per manufacturer's specification. Nos.

18.0 4.10 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse

sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)

19.0 4.13 Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality

using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally

with a piece of cloth lightly soaked in kerosene oil.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement

20.0 11.26 slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete

with base of cement mortar 1:4(1 cement : 4 coarse sand) :

21.0 8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished,

machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of

required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1

cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch

ups, including rubbing, curing, edge moulding, facia and polishing to edges to give high gloss finish etc.

complete at all levels.

8.2.2 Granite Stone Slab of Colour Black, Cherry/Ruby red

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J

or L hooks, bolts and nuts 8 mm diameter with bitumen and G.l. limpet washers or with G.l. limpet

22.0 12.1 washers filled with white lead, including a coat of approved steel primer and two coats of approved

paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),

excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever

22.1 12.1.1 1 mm thick with zinc coating not less than 275 gm/m2 sqm 234 1,457.15 340,973.10

22.2 12.1.2 0.80 mm thick with zinc coating not less than 275 gm/m2 sqm 120 1,257.55 150,906.00

23.0 12.3 Extra for circular cutting in C.G.S. sheet roofing for making opening of area exceeding 40 sq.

24.0 MR Installing and fixing 16mm multiwall multicell polycarbonate sheet having vanes for blocking direct 250 3,619.00 904,750.00

sunlights and U clips for joints over existing structure. sqm

Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering,

25.0 14.17 including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in- 200 72.45 14,490.00

Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under, including cutting

26.0 14.75 the patch in proper shape, raking out joints and preparing plastering the wall surface with white 870 670.95 583,726.50

cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per

the direction of Engineer-In-Charge. sqm

Digitally signed by AMIT

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door

27.0 14.85 shutters to existing door frames, including replacement of hinges with screws, etc. as required, all 30 429.10 12,873.00

complete as per the direction of the Engineer-in-charge. each

28.0 13.4 12 mm cement plaster of mix :

29.0 13.16 6 mm cement plaster of mix :

30.0 13.11 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse

sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).

31.0 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the

surface even and smooth complete. Sqm 2500.00 262.70 656,750.00

Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC

32.0 13.48A less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance

exterior paint of required shade with silicon additives.

32.1 13.48A.1 New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of 1530 181.25 277,312.50

exterior primer applied @ 0.90 litre/10 sqm. sqm

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per

33.0 13.52 manufacturer’s specifications including appropriate priming coat, preparation of surface, etc.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic

34.0 13.83 Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying

additional coats wherever required to achieve even shade and colour.

35.0 13.99 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give

an even shade :

35.1 13.99.1 One or more coats on old work sqm 1000 102.80 102,800.00

Careful dismantling of installed solar panels on rooftop and stacking them carefully at safe location for

reinstalling along with all the accessories. kWp

Reinstalling earlier removed solar panels on raised platform with raised framework including all the

accessories, footing etc. kWp

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked

together through their entire length and jointed together at the end by end locks, mounted on

specially designed pipe shaft with brackets, side guides and arrangements for inside and outside

locking with push and pull operation complete, including the cost of providing and fixing necessary

27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming

to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.

38.1 10.6.1 80x1.25 mm M.S. laths with 1.25 mm thick top cover sqm 55 3,653.20 200,926.00

39.0 10.7 Providing and fixing ball bearing for rolling shutters. each 5.00 492.35 2,461.75

40.0 10.8 Extra for providing mechanical device chain and crank operation for operating rolling shutters.

40.1 10.8.1 Exceeding 10.00 sqm and upto 16.80 sqm in the area sqm 15.00 1281.35 19,220.25

Digitally signed by AMIT

41.0 16.53 Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre

openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall

with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced

barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or

G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced

barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with

tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid

separately) Metre 2041.00 375.80 767,007.80

42.0 6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation

42.1 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 80.00 7132.25 570,580.00

43.0 6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level in all shapes and sizes in :

43.1 6.4.2 Cement mortar 1:6 (1 cement: 6 coarse sand) Cum 180.00 9105.95 1,639,071.00

44.0 5.33 Providing and laying in position ready mixed or site batched design mix cement concrete for

reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural

sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended

proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and

workability without impairing strength; including pumping of concrete to site of laying, curing,

carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as

per direction of the engineer-in-charge, for the following grades of concrete.: Note: Extra cement up

to 10% of the minimum specified cement content in design mix shall be payable separately. In case

the cement content in design mix is more than 110% of the specified minimum cement content, the

contractor shall have discretion to either re-design the mix or bear the cost of extra cement.

5.33.1 All works upto plinth level

44.1 5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum Cum 80.00 9504.75 760,380.00

45.0 5.33.2 All works above plinth level upto floor V level

45.1 5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum Cum 25.00 9860.4 246,510.00

46.0 5.22 Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding

all complete upto plinth level.

46.1 5.22.6 Thermo-Mechanically Treated bars Kg 10500.00 107.85 1,132,425.00

47.0 5.22A Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding

all complete. Above plinth level.

47.1 5.22A.6 Thermo-Mechanically Treated bars Kg 4650.00 107.85 501,502.50

48.0 5.9 Centering and shuttering including strutting, propping etc. and removal of form for :

48.1 5.9.1 Foundation, footing, bases of columns etc. for mass concrete Sqm 418.00 392.15 163,918.70

48.2 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers Sqm 581.00 736.40 427,848.40

48.3 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 619.00 961.30 595,044.70

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including

49.0 10.16 cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including

welding and bolted with special shaped washers etc. Complete.

49.1 10.16.1 Hot finished welded type tubes kg 500 194.40 97,200.00

Digitally signed by AMIT

50.0 10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and

applying a priming coat of approved steel primer using structural steel etc. as required.

In stringers, treads, landings etc. of stair cases, including use

of chequered plate wherever required, all complete kg

In gratings, frames, guard bar, ladder, railings, brackets,

gates and similar works kg

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather

51.0 21.8 silicon sealant over backer rod of approved quality as per architectural drawings and direction of

Engineer-in-charge complete.

51.1 21.8.1 Upto 5 mm depth and 5 mm width metre 500 96.75 48,375.00

52.0 MR Supplying and installing rooftop ventilator made up of aluminium having dia of 24 inches and 42 no. of 25 7,268.00 181,700.00

blade on pre existing PEB structure. Nos.

Installting and fixing LED flood light of 50 watt having Cool White color ,6500K and IP66 Water proof

53.0 MR rating with Aluminium PDC Housing and Reflector & Clear Optics with 5Kv Surge Protection and 440V 40 3,563.85 142,554.00

High Voltage Protection Nos.

54.0 9.20 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type,

core of block board construction with frame of 1st class hard wood and well matched teak 3 ply

veneering with vertical grains or cross bands and face veneers on both faces of shutters.

54.1 9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 45 3,473.45 156,305.25

55.0 9.76 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of 20 854.65 17,093.00

lever handles of approved quality with necessary screws etc. complete. each

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc.

complete. each

Sealing of separation crack between frame (RCC, Steel) and brick works by cutting grooves. Making

57.0 MR clean ans filling of grooves with polymer modified cementatious mortar upto 50 mm depth in two 100 320.00 32,000.00

4 Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement

: 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom

58.0 18.34 diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation

concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside

plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating

coat of neat cement complete as per standard design :

58.1 18.34.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 each 15 18,896.70 283,450.50

59.0 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in

the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :

Digitally signed by AMIT

60.0 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate

40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design :

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry

chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be

not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:

19.4.3 180x150 mm size P type

61.1 19.4.3.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 10 2,802.15 28,021.50

Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful

19.5 materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps

Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate

6mm nominal size ), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening

5.18 cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of

63.0 the jambs, sills and soffits.

Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including

providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with

zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide

having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610

mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor

fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and

other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and

placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs

9.105 along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with

nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by

25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to

centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks,

M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5mm Each) to be provided

at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws,

including jointing and finishing to a flush finish with recommended jointing compound, jointing tape,

angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for

board as per manufacture's specification and direction of engineer in charge all complete.

75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster

board conforming to IS: 2095: (part I): 2011 (Board with BIS certification marks)

Digitally signed by AMIT

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand

& manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse

11.41A sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement

and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying

of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system

and rubber mallet for placing the tiles gently and easily.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal

level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120

grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get

required length and of size 24x38mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm

center to center and cross "T" of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200 mm

long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and

secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet

12.52 to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of

size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required

cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.

Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm

fixed to ceiling with 12.5 mm dia and 50mm long dash fasteners, 4 mm GI adjustable rods with

galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along

main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all

complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm

thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and

electro statically polyester powder coated of thickness 60 microns (minimum), including factory

painted after bending. Sqm

Digitally signed by AMIT

Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special

sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side

inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27

mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x

50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required

length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels

45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick

bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to

centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of

2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27

12.45 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help

of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of

gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at

230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with

recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto

150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification

and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of

perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in

Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095-(Part I) :2011 (Board with BIS

12.45.1 certification marks) Sqm 30.00 1355.80 40,674.00

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ 49,384.50

suede finish with high density protective surface layer and reverse side of adhesive bonding quality

conforming to IS : 2046 Type S, including cost of adhesive of approved quality- 1.0 mm Thick Sqm

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using

1.1 11.21 acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as

per IS : 4457, complete as per the direction of Engineer-in- Charge.

In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse

11.21.1.1 Acid and alkali resistant tile Sqm 50 1738.15 86,907.50

In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali

Stone tile work for wall lining upto 10 m height with special adhesive over 12

mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing

in white cement with an admixture of pigment to match the stone shade.

7.38.1 8mm thick (mirror polished and machine cut edge)

7.38.1.1 Granite stone of any colour and shade Sqm 50 3094.55 154,727.50

Providing and laying Micro Concrete of approved brand in proportion 1:1 with metal No.1 including

mixing, waterproof shuttering, pouring, consolidating, scaffolding, curing etc. As pr mfg.'s

MR specifications. (The items shall be paid on actual consumption of micro concrete)Testing of micro cum 4 42000 168,000.00

concrete prior to use is necessary. The cost for the same shalllbe included in rates of finished items(all

related items, materials and activities required for the proper completion of the said activity shall be

included in the same rates like scaffolding, safety equipments, rection machinery etc.).

Digitally signed by AMIT

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement

12.22 : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 20 298.25 5,965.00

micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat

cement, rounding the edges and making and finishing the outlet complete Each

10.0 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with

EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of

engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) Sqm 159.00 1505.25 239,334.75

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS

DSR NO S NO TOTAL AMOUNT TOTAL AMOUNT

DSR NO S NO TOTAL AMOUNT TOTAL AMOUNT

DESCRIPTION UNIT QUANTITY RATE

DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commisioning of SINGLE LEVER CONCEALED BASIN

MR 1 MIXER (WALL MOUNTED) WITH SPOUT (COMPOSITE ONE PIECE BODY) EACH 5 15000.00 75000.00

Supply, Installation, Testing and Commisioning of TABLE TOP BASIN, SIZE:

Supply, Installation, Testing and Commisioing of suitable compatible WASTE COUPLING

MR 3 32MM- FULL THREAD- WITH CERAMIC CAP-*130MM HEIGHT *65MM CERAMIC CAP EACH 5 2000.00 10000.00

Supply, Installation, Testing and Commisioing of BOTTLE TRAP (WITH INTERNAL

MR 4 PARTITION) 32mm SIZE WITH 300mm & 190mm LONG WALL CONNECTION PIPES & EACH 10 3000.00 30000.00

Supply, Installation, Testing and Commisiong of RIMLESS, BLIND INSTALLATION WALL

HUNG WC WITH UF SOFT CLOSE SLIM SEAT COVER, HINGES AND ACCESSORIES

SET, SIZE: 375X520X400 MM

Supply, Installation, Testing and Commisiong of PNEUMATIC CONTROL PLATE

Supply, Installation, Testing and Commisiong of ANGULAR STOP COCK WITH WALL

Supply, Installation, Testing and Commisiong of CONCEALED STOP COCK WITH

MR 8 ADJUSTABLE WITH WALL FLANGE 15mm EACH 3 4500.00 13500.00

Supply, Installation, Testing and Commisiong of HAND SHOWER (HEALTH FAUCET) WITH

MR 9 8mm DIA 1.2 METER LONG FLEXIBLE TUBE EACH 3 2300.00 6900.00

Supply, Installation, Testing and Commisiong of PNEUMATIC SINGLE PIECE SLIM

MR 10 CONCEALED CISTERN BODY WITH INSTALLATION KIT & “S-TYPE” DRAIN PIPE EACH 3 7000.00 21000.00

CONNECTION SET FOR WALL HUNG WC (WITHOUT FLUSH CONTROL PLATE)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings

17.28 complete.

17.28.2 Flexible pipe

Providing and fixing mirror of superior glass (of approved quality) complete with 6mm thick

17.31 12 hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. EACH 3 1607.95 4823.85

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved

18.53 quality conforming to IS : 8931

18.53.1 15 mm nominal bore EACH 0 574.30 0.00

Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast

(spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse

17.61 sand: 6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and

14 pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :

Digitally signed by AMIT

18.76 Cutting holes upto 30x30cm in walls including making good the same.

18.76.1 With common burnt clay F.P.S. (non modular) bricks EACH 1 416.80 416.80

Making chases upto 7.5 X 7.5 cm in walls including making good and finishing with matching

18.78 16 surface after housing G.I. pipe etc. METRE 5 202.90 1014.50

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the

18.7 pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step

CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

17 Internal work - Exposed on wall

18.7.2 20mm nominal outer dia pipes METRE 0 335.00 0.00

18.7.3 25mm nominal outer dia pipes METRE 20 401.55 8031.00

18.7.4 32mm nominal outer dia pipes METRE 0 518.75 0.00

18.7.5 40mm nominal outer dia pipes METRE 0 702.95 0.00

18.7.6 50mm nominal outer dia pipes METRE 0 934.15 0.00

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe

with clamps at 1.00 m spacing.

18.8 18 This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of

cutting chases and making good the same including testing of joints complete as per direction

of Engineer in Charge.

Concealed work including cutting chases and making good the walls etc.,

18.8.1 15mm nominal outer dia pipes METRE 25 497.80 12445.00

18.8.2 20mm nominal outer dia pipes METRE 20 537.60 10752.00

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS

18.51 standards and weighing not less than 690 gms.

18.51.1 15 mm nominal bore EACH 6 798.95 4793.70

Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for

soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all

neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or

without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels,

clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp &

hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc.

including chase cutting as required, excavation and back filling in all kind of soils, suspended

from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm.

20 alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) including cost of shuttering for proper completion of the work, breaking and

making good the walls and floors etc. after pipes have been duly laid and tested. The rubber

ring shall confirm to IS:5382.

The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on

50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes

commissioning of all pipes lines as per drawings and specifications and as directed by engg-

in-charge at site.

a 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 30.00 536.00 16080.00

b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 30.00 416.00 12480.00

Digitally signed by AMIT

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6

Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces,

enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by

clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with

cement concrete 1:2:4 complete as required.

Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating

complete in all respects.

Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser EACH 10 536.00 5360.00

Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps.

Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round

MR 24 cover with screws and other required fitting complete as required. EACH 5 1001.00 5005.00

MR 25 Supply, Installation, Testing and Commissioning of 15 litre geyser EACH 10000.00 0.00

MR 26 Supply, Installation, Testing and Commisiong of SOAP DISH HOLDER EACH 5 4392.00 21960.00

MR 27 Supply, Installation, Testing and Commisiong of TUMBLER HOLDER EACH 5 4309.00 21545.00

Supply, Installation, Testing and Commisiong of TOWEL RACK 600MM LONG WITH

MR 28 LOWER HANGER EACH 3 13000.00 39000.00

Providing and fixing white vitreous china water closet squatting pan (Indian

17.13.1 Long pattern W.C. pan of size 580 mm EACH 2 1959.80 3919.6

Providing and fixing P.V.C. low level flushing cistern with manually controlled

17.18 device (handle lever) conforming to IS : 7231, with all fittings and fixtures

17.18.1 10 litre capacity - White EACH 2 1190.65 2381.3

Providing and fixing white vitreous china battery based infrared sensor operated urinal of

approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml

consumption), having water inlet from back side, including fixing to wall with suitable brackets

all as per manufacturers specification and direction of Engineer-in-charge

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I.

17.1 brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting

and making good the walls wherever required : Each 2 6945.60 13891.20

17.10.1 Kitchen Sink with Drain Board

17.10.1.1 510 x1040 mm bowl depth 250 mm

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

S NO DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

1.1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS

PVC insulated copper conductor single core cable in surface / recessed medium

class PVC conduit, with modular switch, modular plate, suitable GI box and earthing

A.1 the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as

1.55 Wiring for group controlled (looped) light point/ fan point/call bell point (without

independent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor

A.2 single core cable in surface / recessed PVC conduit, and earthing the point with 1.5

sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

1.12 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper

conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1

No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing

1.24 Supplying and fixing following modular switch/ socket on the existing modular plate &

switch box including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 60 122.00 7320.00

1.24.5 6 pin 15/16 amp socket outlet Each 15 197.00 2955.00

A.5 1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch Each

box excluding modular plate as required. 30 40.00 1200.00

1.27 Supplying and fixing following size/module, GI box along with Modular base & cover plate

on existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING

1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

FR PVC insulated copper conductor, single core cable in surface/ recessed medium

class PVC conduit

1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 50 233.00 11650.00

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 20 334.00 6680.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 150 439.00 65850.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 120 1005.00 120600.00

Digitally signed by AMIT

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire 1

Supplying and fixing of following sizes medium class PVC conduit aong with accessories

1.21 in surface/ recess including cutting the wall and making good the same incase of

recessed conduit as required

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit

2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete

with connections, testing and commissioning etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel,

MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar,

neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing

etc. as required. (But without MCB/ RCCB/ Isolator)

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts,

2.14 residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes

D.5 in the existing MCB DB complete with connections, testing and commissioning etc. as

Supplying and fixing following rating, four pole, (three phase

and neutral), 415 volts, residual current circuit breaker (RCCB),

2.15 having a sensitivity current 30 mA in the existing MCB DB

complete with connections, testing and commissioning etc. as

3 Supply, Installation, Testing and Commisioning of Junction boxes for direct access

to cables at the intersection of raceways supplied completely with base and cover

MR plates, height adjustable junction box 65- 90 mm including all accessories

complete in all respect as per the directions of engineer i

4 MR Supply and Fixing of factory fabricated GI ceiling sheet steel raceway openable

bottom cover junction boxes made from 2mm thick G.I. sheets for top, bottom

and sides and complete with 2mm thick bottom cover complete with rubber

gasketing, painting. The junction box shall be suitable to accommodate the

raceways specified above. Necessary civil work to support/ clamp from RCC slab

need to be included here too. All supporting arrangement is included in the

ceiling raceways

Digitally signed by AMIT

7 Supplying and fixing of following sizes of medium class PVC conduit along with

accessories in surface/recess including painting in case of surface conduit, or

cutting the wall and making good the same in case of recessed conduit as

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the

existing surface/ recessed Steel/ PVC conduit as required.

Digitally signed by AMIT

S No Item Description UoM Qty Unit Rate Total rate

SITC of 86" Professional Ultra HD Display Panel, 4K UHD (3840x2160) Resolution,

Brightness 400 Nits, Dynamic Contrast Ratio: 500000:1, Viewing angle (horizontal /

vertical): 178 / 178 degree, Display Colours: 1.07 Billion, Panel technology: IPS /

Direct LED, Contrast ratio (typical) 1200:1, Connectivity: Video Input: 2 HDMI 2.0, 2

USB 2.0, DVI-I, Audio In, Audio Out, COntrol: RS232, Ethernet, 2x10W Built-in

speakers, BIS Certified etc all complete

SITC of Fixed Wall Mount, capable of holding up to 110 kg and supports 75" to 98"

displays, VESA Compliant etc all complete

SITC of Cable Cubby with flip top, cover and multi-format cables, 2 Universal Power,

1 HDMI, 1 USB-C, 1 Ehternet Cable, made of steel and aluminium etc all complete

SITC of Premium USB Video Conferencing Bar with 4K integrated Camera with Speaker

4 or Group Framing, Six-element beamforming microphone array; Inbuilt Stereo No's 1 353,000.00 353,000.00

SITC of Universal Switcher with HDMI and USB-C connectivity, 2 HDMI Inputs, 2 USB-

C connectivity (4K Video, Audio, Data, Power charge), 2 HDMI Outputs, 4 USB-A 3.0

Connection (for USB Devices), 2 USB-B 3.0 Connection (for PC hosts), USB host

5 switching, Analog audio de-embedding, Charging via USB-C up to 60w, Supports No's 1 332,350.00 332,350.00

HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps), DP Alt Mode,

HDMI 2.0, HDMI 1.x, DVI Signal Support, HDCP 1.x, HDCP 2.2 support etc all

SITC of HDMI 2.0 Matrix Switcher, 4HDMI Inputs, 3 Outputs, with breakout Audio,

Occupancy Sensor input and various control features, Supports HDMI 4K signal

6 formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps), HDMI 2.0, HDMI 1.x, DVI No's 1 453,100.00 453,100.00

Complaint, HDCP 1.x, HDCP 2.2 support, GPIO control ports, Device control via

Ethernet (TCP/IP) etc all complete etc all complete

SITC of 1 Meter Premium High Speed HDMI 2.0b Flexy Cable, Bandwidth up to

9 18Gbps, Up to 4096x2160@60Hz at RGB 4:4:4 video resolution, High Dynamic No's 5 4,312.50 21,562.50

Range (HDR10), Dolby Vision and Hybrid log–gamma (HLG) video etc all complete

Digitally signed by AMIT

SITC of 2 Meter Premium High Speed HDMI 2.0b Flexy Cable, Bandwidth up to

10 18Gbps, Up to 4096x2160@60Hz at RGB 4:4:4 video resolution, High Dynamic No's 2 6,555.00 13,110.00

Range (HDR10), Dolby Vision and Hybrid log–gamma (HLG) video etc all complete

SITC of 10 Meter Active Copper HDMI Cable, Data Rate: Up to 18.2Gbps, Colour

Depth: Up to 16 bits, Colour Formats: RGB 4:4:4 / Y’CBCR 4:2:2 / Y’CBCR 4:2:0,

11 Consumer Electronic Control (CEC), Auto Lip-Sync Correction, Audio Return Channel No's 2 22,425.00 44,850.00

(ARC), Enhanced Audio Return Channel (eARC), High Dynamic Range (HDR) etc all

SITC of 1 Meter USB Full-Featured Type-C cable for USB 3.1 Gen2, 4 Lane

Displayport Alt mode (4K60FPS Video and Audio), Supporting peripherals via USB

2.0 up to 480 Mbps (Mouse, Keyboard, Thumb Drive, Speakerphone and Webcam)

etc all complete

SITC of 2 Meter USB Full-Featured Type-C cable for USB 3.1 Gen2, 4 Lane

Displayport Alt mode (4K60FPS Video and Audio), Supporting peripherals via USB

2.0 up to 480 Mbps (Mouse, Keyboard, Thumb Drive, Speakerphone and Webcam)

etc all complete

SITC of 10 Meter USB 3.1 Gen1 SuperSpeed Active Extension Cable TypeA/male to

14 TypeA/female, Supports 4K Webcam, SSD storage, Native USB2/USB1 and USB3 No's 1 86,468.50 86,468.50

extension, Plug and play compatible with PC, Mac, and Linux etc all complete

SITC of 16U, Equipment Rack, with Front & Side doors, 4 No Fan Assembly, on Top

of the Rack, 4 Caster wheels, 2 no Shelfs to mount the equipments which are not rack

mounted, 8X2, 5/6 Amp. Power Distribution Unit, Cable Manager & Sufficient Rack

hardwares etc all complete

26 Meeting Table

Dimesion: 2300mm(L) x 1150mm(D) x 750mm(H) No's 1 75255 75,255.00

Digitally signed by AMIT

Supplying, and placing in position similar to meeting table as per image/drawing. The

table top is made out of 25mm thk prelaminated particle board with 2mm thk pvc

edge banding . The Tabletop supported on Mild Steel 50mm x50mm Slanted Leg

and 50mm x 25mm Horizontal connectors with Powder coting of 50 Micron.Provison

of wire carrier should be made from 0.6mm thick CRCA & powder coated 40-50

microns. Also having a provision of 6 module flip top box & metal raceway for wire

flow. The product should be as per above given specification under the guidance of

project architect & Engineer in charge. Sizes may slightly vary as per requirement os

site / selection of client/Engineer Incharge

Supplying, and placing in position similar to medium back 360° degree revolving chair

all over size is: 546mm (l) x 630mm (d) x 1160mm (h) as per image. The chair made

of full leatherette in black colour .it will comes in matte finsih in contemporary style

.arms: chrome finish arms with pu padding .use of ply: 12 mm thick hot pressed bwr

plywood (is grade - 303 for seat and back) .seat: 40 ± 2 mm thick polyurethane foam

27 with density 32 (±3) kg per cu meter for best quality cushioning in seat, back: 15 ± 2 No's 21 20100 422,100.00

soft foam with best quality cushioned in back .mechanism: torsion bar mechanism.

Gas lift 100 mm telescopic haudraulic base: 650 mm chrome base with smooth

castors. The product should be as per above given specification under the guidance

of project architect & Engineer in charge. Sizes may slightly vary as per requirement

os site / selection of client/Engineer Incharge

28 Linear Workstation for E-Catering team area

Dimension (L) 1200mm x (D) 600mm X (H) 1050mm

Digitally signed by AMIT

Supplying, and placing in position similar to linear workstation as per Image.The

worktop made out of 25mm thk. Prelam Particle board with 2 mm thk PVC edge

banding.The Table top supported on Mild Steel of size 50mm x50mm Slanted Leg

and 50mm x 25mm Horizontal connectors with Powder coating of 50 Micron.Middle

Leg :- 0.8 mm thk Metal panel fixed on both side of the "T" leg for Vertical wire

carrying purpose.(Sharing Workstation). 0.8 mm thk Single/Double metal powder

coated raceway with Powder coating of 50 Micron below top for wiring.Vertical wire

carrying pole with powder coating 50 micron below top for wiring( Non- sharing

workstation ). Also having a provision of ms perfoated sheet hanging modesty.

provision of glass divider rest on the "D" brackets on the table top between opposite

seatings. All working or non working edges shall be provided with machine pressed

2mm thick PVC edging using special hot melt glue at hot temperature. Also a

provision of Pedestal Unit (size:- L-400mm x D-450mm x H-600mm) with a

combination of 2 drawer & one filing drawer. The pedestal storage unit shall be made

of 18 mm thick prelaminated Particle board with provision of handles & Locking

arrangement. Provision of pullout PVC keyboard tray and CPU trolley for each

seating.Provision of glass divider between two seating. The product should be as

per above given specification under the guidance of project architect & Engineer in

charge. Sizes may slightly vary as per requirement os site / selection of

client/Engineer Incharge

29 Workstation Chair No's 10 14500 145,000.00

Supplying and placing in position similar to medium back 360° degree revolving chair

all over size is: 610mm (l) x 470mm (d) x 1040mm (h) as per image. The chair made

of full mesh in black colour .it will comes in matte finish in contemporary style. Arms:

armrest is having two adjustment heights (up & down).use of ply: 12 mm thick hot

pressed bwr plywood (is grade - 303 for seat).seat: 40 ± 2 mm thick polyurethane

foam with density 32 (±3) kg per cu meter for best quality cushioning in seat , back :

frame of design shall be curved made of two pieces injection moulded frame cover

with mesh .backrest support adjustable lumbar support, mechanism: self weighted

multi locking mechanism, gas lift 100 mm telescopic haudraulic base: 650 mm

chrome base with smooth castors . The product should be as per above given

specification under the guidance of project architect & Engineer in charge. Sizes may

slightly vary as per requirement os site / selection of client/Engineer Incharge

20 Main Table for Asst Manager/Manager Cubicles No's 3 55000 165,000.00

Main Table Dimension:1350mm(L)x 750mm(D)x 750mm(H)

Side runner Dimension:1000mm(L)x 450mm(D)x 750mm(H)

Digitally signed by AMIT

Supplying, and placing in position similar to main Table .The Table top made out of

25mm thk prelam particle board with 2mm thk pvc edge banding & side panel &

modesty panel made up of 18mm thick pre-laminated particle board .The working

edges shall be provided with machine pressed 2mm thick PVC edging using special

hot melt glue at hot temperature. The table have a provision of free standing Side

Storage of size 1000mm L x 450mm D x 750mm Ht., Storage Top made out of 18mm

thick pre laminated particle board and rest all storage to be made out of 18 mm thick

prelaminated particle board . All exposed edges shall be provided with machine

pressed 2 mm thick PVC lipping glued with hot melt EVA glue. Storage having a

provision of 3 drawer unit, two openable shutter with shelf, D shape handle & central

locking arrangement. Sizes may slightly vary as per requirement os site / selection of

client/Engineer Incharge

21 Main Chair for Asst Manager/Manager Cubicles No's 3 18000 54,000.00

Supplying and placing in position similar to high back 360° degree revolving chair all

over size is: 640mm (l) x 480mm (d) x 1240mm (h) as per image. The chair made of

full mesh in black colour .it will comes in matte finish in contemporary style. Arms:

armrest is having two adjustment heights (up & down) .use of ply: 12 mm thick hot

pressed bwr plywood (is grade - 303 for seat).seat: 40 ± 2 mm thick polyurethane

foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, back:

frame of design shall be curved made of two pieces injection moulded frame cover

with mesh .backrest support adjustable lumbar support, mechanism: self weighted

multi locking mechanism .gas lift 100 mm telescopic haudraulic , base : 650 mm

chrome base with smooth castors. Sizes may slightly vary as per requirement os

site / selection of client/Engineer Incharge

22 Visitor Chair for Asst Manager/Manager Cubicles No's 9 15000 135,000.00

Digitally signed by AMIT

Supplying and placing in position similar to medium back 360° degree revolving chair

all over size is: 610mm (l) x 470mm (d) x 1040mm (h) as per image. The chair made

of full mesh in black colour .it will comes in matte finish in contemporary style. Arms:

armrest is having two adjustment heights (up & down).use of ply: 12 mm thick hot

pressed bwr plywood (is grade - 303 for seat).seat: 40 ± 2 mm thick polyurethane

foam with density 32 (±3) kg per cu meter for best quality cushioning in seat , back :

frame of design shall be curved made of two pieces injection moulded frame cover

with mesh .backrest support adjustable lumbar support, mechanism: self weighted

multi locking mechanism, gas lift 100 mm telescopic haudraulic base: 650 mm

chrome base with smooth castors . The product should be as per above given

specification under the guidance of project architect & Engineer in charge. Sizes may

slightly vary as per requirement os site / selection of client/Engineer Incharge

Supply, Installation, Testing & Commissioning of 5MP IR IP H.265 Vandal

Proof Dome camera with 2.8 to 12mm Motorized Lens,Smart IR, up to 30M IR

distance,Up to 120 dB WDR (Wide Dynamic Range),3D DNR (Digital Noise

Reduction),H.265+, H.265, H.264, MJPEG,Corridor mode, Triple streams,3-

Axis, IP67, IK10 Vandal Resistant,Colour: 0.005Lux (F1.4, AGC ON), 0 Lux

1 with IR,Video Compression H.265+, H.265, H.264, MJPEG,Behavior Detection Nos 60 14421 865260

Intrusion, Crossing line, Motion detection, Object left, Missing object,Intelligent

Identification Face detection, Defocus, Scene Change,PoE (IEEE802.3 af)

Power consumption: Max 7.2W,Edge Storage Micro SD Card, Up to 256GB,

ANR Support,Working Environment -40°C ~ +60°C, Humidity ≤ 90% RH(Non-

condensing),Compatible Integration ONVIF (Profile S/G), API.

Supply, Installation, Testing and Commissioning of 64Ch Embedded Network

Video Recorder with 4 Sata Supports 1 × RJ45 1000M ,4K Cameras, HDMI,

VGA, RAID, Redundant power supply, Smart Analytics

SITC of Hard Disk Drive 8TB, 24/7 surveillance category Only complete etc as

required.etc.all complete.

Digitally signed by AMIT

SITC of Professional Large Format Display, Size: 65", Brightness: >400 nits

4 resolution 3840X2160 (UHD),Viewing Angle (H/V) Nos 2 106253 212506

178/178 Contrast Ratio: 4000:1, with wall mount kit

SITC of HDMI cables 10 meters M2M etc all compelte.

Digitally signed by AMIT

Sr. No. DSR/NDSR Description Unit Quantity Rate Amount

Scarifying the existing bituminous road surface to a depth of 50 mm and

1 16.77 disposal of scarified material within all lifts and lead upto 1km (by mechanical Sqm 3000 7 21000

Construction of dry lean cement concrete sub base over a prepared sub-grade

with coarse and fine aggregate conforming to IS:383, the size of coarse

aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1,

2 16.80 aggregate gradation after blending to be as per specifications, cement content Cum 150 4148.65 622297.5

not to be less than 150 Kg/cum, optimum moisture content to be determined

during trial length construction, concrete strength not to be less than 10 Mpa at

7 days, mixed in a batching plant, transported to site, for all leads & lifts, laid

with a mechanical paver, compacting with 8-10 tonne vibratory roller, finishing

and curing etc. complete as per direction of Engineer-in- charge.

Providing and laying C.C. pavement of mix M-25 with ready mixed concrete

from batching plant. The ready mixed concrete shall be laid and finished with

3 16.75 screed board vibrator , vacuum dewatering process and finally finished by Cum 420 9823.8 4125996

floating, brooming with wire brush etc. complete as per specifications and

directions of Engineer-in-charge. (The panel shuttering work shall be paid for

Providing, laying and making kerb channel 30 cm wide and 50 mm thick with

cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20

mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size, well

rammed and consolidated and grouted with fine sand, including finishing the

top smooth etc. complete and as per direction of Engineer-in-charge.

Digitally signed by AMIT

Sr. No. DSR/NDSR Description Unit Quantity Rate Amount

1.01 2.6 Earth work in excavation by mechanical means (Hydraulic excavator)/manual

means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm

on plan) including getting out and disposal of excavated earth lead upto 50 m

and lift upto 1.5 m, as directed by Engineer-in-charge.

2.6.1 a) All kinds of soil Cum 3087.00 177.50 547943

1.02 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of

foundations etc. in layers not exceeding 20cm in depth, consolidating each

deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

1.03 1.1.2 Carriage of earth by mechanical transport including loading, unloading for a lead

1.04 2.27 Supplying and filling in plinth with sand under floors, including watering,

ramming, consolidating and dressing complete. Cum 50.00 2123.75 106188

Steel work in built up tubular (round, square or rectangular hollow tubes etc.)

10.16.1 trusses etc., including cutting, hoisting, fixing in position and applying a priming Kg 1300 194.4 252720

coat of approved steel primer, including welding and bolted with special shaped

washers etc. complete.

Structural steel work riveted, bolted or welded in built up sections, trusses and

10.2 framed work, including cutting, hoisting, fixing in position and applying a priming Kg 34500 133.7 4612650

coat of approved steel primer all complete.

Providing and fixing precoated galvanised iron profile sheets (size, shape and

pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %)

total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in

240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and

polyester top coat 15-18 microns. Sheet should have protective guard film of 25

microns minimum to avoid scratches during transportation and should be

supplied in single length upto 12 metre or as desired by Engineer-in-charge. The

sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm)

with EPDM seal, complete upto any pitch in horizontal/ vertical or curved

surfaces, excluding the cost of purlins, rafters and trusses and including cutting

to size and shape wherever required.

Digitally signed by AMIT

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50

mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS:

5 12.51 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet

and polyester top coat 15-18 microns using self drilling/ self tapping screws

12.51.6 Gutter (600 mm over all girth) Metre 250.00 1313.70 328425.00

Providing and fixing multicell polycarbonate sheet 16mm with required shape

MR and pitch as per EIC including all the fittings, hooks, L joints, seal etc. complete Sqm 210 3619.00 759990

13.58 Providing and applying two coats of fire retardant paint on cleaned wood / ply Sqm 300 334.5 100350

surface @ 3.5 sqm per litre per coat including preparation of base surface as

per recommendations of manufacturer to make the surface fire retardant.

Digitally signed by AMIT