Bringing to design section of Begumpur Drain from RD 7200 to 9000 for separation of Drain from village abadi area in village Rajapur

Amount

Dismentaling of brick masonry in CM 1:4. HSR 8.5 (b)

Dismentaling of RCC plain 1:2:4. HSR 8.6 (e)

Dismentaling cement concrete 1:3:6. HSR 8.6 (c)

Earth work excavation i/c all lead, lifts and all other allowances with an avg. lead of 90 mtr. HSR 6.2 (b) & (c)

Rehandling of earth work with an avg. lead of 15 mtr. HSR 6.2 (b) & Note-II

Preparing watering and ramming surface for laying C.C. in Horizontal as per PWD specification and design and as per direction of engineer incharge HSR 10.122 (b) (i)

Design mix C.C. of grade M-15 with minimum cement contents 240 kg./cum in F & P HSR 10.64

Providing & fixing in position machine batached and machine mixed design mix M-25 grade cement concrete reinforced cement concrete work, using cement content as per approved design mix i/c pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge in foundation and plinth minimum cement content 330 kg as per HSR item No.10.66

Supply of Fe 500 D, TMT Steel bars of primary steel producers such as TATA Steel Ltd., SAIL, RINL, Jindal Steel & Power Ltd, JWS Steel Ltd. & Electrosteel Ltd or any other primary producer as approved by the Direction Committee of Haryana who are using iron or as per basic raw material/input and having crude steel capacity of 2.0 Million tons per annum and above. (HSR 18.22)

Design mix C.C. of grade M-10 with minimum cement contents 220 kg./cum in F & P HSR 10.63

First class brick work laid in cement sand morter 1:3 in foundation and plinth (HSR 11.5)

First class brick work laid in cement sand morter 1:3 in Superstructure (HSR 11.10)

Sand filling behind pucca structure as per PWD specification and design and as per direction of engineer incharge. HSR 14.83

Filling expension joint. HSR 24.35 (b)

Supply & fixing caution/ sign boards on both side

First class brick work laid in cement sand morter 1:6 in foundation & plinth. HSR 11.2

Laying & Supply of RCC hume pipe 900mm dia. HSR 28.60 (NP 2)

Removing of RCC hume pipe 900mm dia. HSR 8.35 (c)

Centering and shuttering for faces of foundation concrete foundation beams etc.(HSR 9.13)

Centering & shuttering for bottom slab. HSR 9.18(b)

Extra for compaction of E/W as per specifications as per HSR No. 6.2(g) i, ii & v

Dressing bed & preparation of sub grade for lining. HSR 19.1

Dry brick on edge paving sand grouted over 50mm thick earth and mud plaster. HSR 14.20

Brick edging 6.83cm wide 11.43cm deep to plinth protection with 1st class brick including grouting with cement sand mortar 1:4. HSR 11.100

Dismantling dry brick work as per PWD specification and design and as per direction of engineer incharge HSR 8.5 (i)

Preparation of plastered or concrete surfaces for painting, i/c sand papering the surface, applying one coat of linseed oil and filling with approved quality filler, consisting of white lead, linseed oil, varnish and chalk mitti including finishing surface to the required finish, complete HSR 16.24

Painting two coats with ready mixed exterior paint in all shades on newly plastered or concrete exterior surfaces HSR 16.26

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces HSR 16.25

Providing & fixing drainage spout. NS

Earth work excavation in foundation & tranches in cutting with an avg. lead of 15 mtr. HSR 6.2 (b)

Earth work for lip cutting for lining of Drain. HSR 19.23 (a)

Preparing watering & raming surface for laying CC in glacis as per PWD specification & design and as per direction of engineer in charge. HSR 10.122(b)(ii)

Demarcation of land. (NS)

Credit of steel

Credit of Brick bats

Credit of Hume Pipe 900mm

Ishwar Singh Contractor