Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
Closing Date
10 Apr 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Dinesh Kumar Meena
Gwalior AFS, Bharat Petroleum Corporation Limited
Tender Title : SHIFTING BIV TRENCH OF FUEL HYDRANT SYSTEM (CIVIL, ELECTRICAL & MECHANICAL WORKS) IN THE OPERATIONAL AREA OF IAF AT GWALIOR ok
11311
1000402270
Limited Tender
Works
Gwalior AFS
12 Apr 2023
24 Mar 2023
10 Apr 2023
24 Mar 2023
10 Apr 2023
24 Mar 2023
3 Apr 2023 - 6 Apr 2023
JOB:-Shifting of hydrant pit at Gwalior AFS
S.No Short text Item Description UoM Qty Rate Amount
Taking Shut down,Decommissioning and removing of Class A/B/C product from
the pipeline by collecting in barrels/half cut barrels (supplied by BPCL),shifting
the evacuated product and decanting in underground tanks as directed by
Job also includes flushing of evacuated line with water (supplied by BPCL) and
making the lines gas free for hot work.
10 EVACUATE ATF PIPE Charges include all labors,non sparking tools/tackles etc. INM
Complete job to be done even in night time as required in continuous manner
until completion.
Payment shall be made on the INM Dia for the length of the pipeline degassed.
Safety norms as presecribed by the EIC shall be adhered while undertaking the
Earth work in excavation upto required depth below existing ground level upto
required depth including removal of vegetation,shrubs and debris cutting and
dressing the sides in slopes and bottom, levelling, grading and ramming of
bottoms, bailing out of water , supplying of Temporary supports to existing
services line like water pipes,sewage pipes,electric overhead and u/g cables etc
all if encountered, shoring, strutting, backfilling in foundation trenches/plinth
beam/under the floors etc. compacting by the side of the foundation as directed
20 EXCV<1.5 ORD BCK IN M3
by the Engineer in Charge including spreading, watering and compaction using
suitable compactors. The measurement of the excavation would be based on
actual depth of excavation with applicable rate for different depths. Payment to
be made as per excavation plan only.No payment would be made for extra
excavation for making slopes etc. (Payment against this item shall be released
only for the earth being backfilled)
Depth upto 1.5 M normal soil
Earth work in excavation upto required depth below existing ground level upto
required depth including removal of vegetation,shrubs and debris cutting and
dressing the sides in slopes and bottom, levelling, grading and ramming of
bottoms, bailing out of water , supplying of Temporary supports to existing
services line like water pipes,sewage pipes,electric overhead and u/g cables etc
all if encountered, shoring, strutting, backfilling in foundation trenches/plinth
beam/under the floors etc. compacting by the side of the foundation as directed
30 EXCV<3 ORD BCK IN M3
by the Engineer in Charge including spreading, watering and compaction using
suitable compactors. The measurement of the excavation would be based on
actual depth of excavation with applicable rate for different depths. Payment to
be made as per excavation plan only.No payment would be made for extra
excavation for making slopes etc. (Payment against this item shall be released
only for the earth being backfilled)
Depth >1.5 BUT <3.0 M in normal soil
Providing and laying PLAIN CEMENT CONCRETE for all depths below and
upto plinth level in foundations,drains,fillings, non-suspended floors, pavements
& ramps or any other works etc.including the cost ofposition cement concrete of
40 . . . PCC PLIN 1:3:6 CS specified grade including the cost ofcentring and shuttering, tamping, ramming, M3
vibrating,curing, in anyshape,position,thickness and finishing the top surface
rough or smooth,etc. all complete as per directions of Engineer-in-charge. - All
work upto plinth level
Supplying and laying in postion RCC of specified nominal mix using 20mm
anddown size graded crushed stone aggregate in sub structure of all types e.g.
trenches, culverts, manholes, pipe encasement, catchpits, drains, pits,
etc.,including placing of concrete,supplying pockets,openings,
recesses,chamfering wherever required etc., vibrating, tamping, curing
andrendering if reqd. to give a smooth and even surface etc. all
50 RCC PLIN 1:1.5:3 CS M3
complete(excluding the cost of reinforcement, but including the cost of
centringand shuttering)for all depths below and upto plinth level in any
shape,position, thickness etc. all complete as specified and directed. Onlysteel
shuttering will be used so as to obtain required finish. Theheight of shuttering
shall not exceed 1.5 m per lift of concrete.: 1:1.5:3 (1 cement: 1.5 coarse sand:
3 grade stone aggregate 20 mm nominal size)
Supplying and placing HYSD steel reinforcement of Grade 500 (TMT)
conforming to IS 1786 in position for RCC worksincluding straightening, cutting,
bending, placing in position and binding with 16 SWG black soft annealed
binding wire at everyintersection, supplying and placing appropriate cover block
60 . . . STEEL REINFORCEMENT KG
all completeincluding cleaning and making it free from oil, grease etc. complete-
for all heights and depths and conforming to relevant IS code (Make:
SAIL,TATA, JSW, ESSAR, VIZAG STEEL or approved equivalent make
conforming to IS code)
BRICK MASONRY ABOVE PLINTH , Supplying and laying Brick work in
superstructure aboveplinth level including supplying and laying good quality
bricksconforming to BIS std. of specified class and above, satisfying
efflorescene,water absorbtion and dimension test as per IS code) in
70 BRK MN AB PL CS C100 M3
superstructureusing Cement Mortar 1:5(1part cement : 5 part coarse sand)
includingraking out joints, curing, soaking of bricks, providing
recesses,openings,scaffolding,staging,curing,raking out joints etc. complete as
directed. CL 100 (BIS Class 100, Compressive strength 100 kg/cm2)
CEMENT PLASTER Providing cement plaster finished including
cleaning,hacking of base surfaces, scaffolding,curing,finishing etc. all complete
for all heights as per specifications and directions of Engineer-in-charge
including grooves, bands, drip moulder where ever required as specified. also
80 PLASTER 12MM CS 1:5 including providing 20 gauge chicken wire mesh stretched tight at all RCC/ PCC M2
and masonry meeting points in 300mm wide strips (150mm on on each surface)
fixed with G.I. "U" type nails before plastering.(Payment will be made separately
for chicken wire mesh). 12mm thick with 1:5 (1 cement: 2 parts of fine sand:
parts of coarse sand)
Preparing surface and painting of approved make, shade and quality in all
heights of walls,ceiling, sun sheds fins etc. incl. providing scaffolding,pitting in
plaster to be made good, cleaning with coir brush & sand paper, curing and
90 BLD PNT CMT PRIM 1C supply of all materials and labour complete. The finished surface shall be even M2
and uniform.The application of paint shall conform to Manufacturer's
recommendation and as per the directions of Enginner-in-Charge.1 coat of
Preparing surface and painting of approved make, shade and quality in all
heights of walls,ceiling, sun sheds fins etc. incl. providing scaffolding,pitting in
plaster to be made good, cleaning with coir brush & sand paper, curing and
100 . . . BLD PNT SNOWCEM 2C supply of all materials and labour complete. The finished surface shall be even M2
and uniform.The application of paint shall conform to Manufacturer's
recommendation and as per the directions of Enginner-in-Charge. 2 coats of
Cement Paint of Snowcem or equivalent make
Fabricating; erecting in position; bolted and /or welded Structural steel works
(Steel supplied by BPCL) at all levels; including all built-up sections /compound
sections made out of rolled sections and / or plates intrusses; rafters; purlins;
wind ties; coloumns; portals; platforms;staircases; (excluding chequered plates,
swing ladders, foundation bolts and gratings) ladders; stoppers; brackets sag
rods; supports for equipment and accessories; hand railings posts cutting to
required size as per approved drawings; straightening if required bolting/ welding
of joints (including sealing the joints of the box sections with continuous welding
wherever specified) finishing edges by grinding; fixing in line and level with
temporary staging and removal of same after erection; grouting with ordinary
grout as specified; including preparation of detailed fabrication drawings, cost of
painting as specified below, complete in all respect as directed by Engineer-in-
charge. Cost of nutbolts to be borne by contractor.
1. The structure may be Pre-fabricated with bolting arrangements bymaking
110 FE STR STEEL MANUAL necessary holes, preparing surface by manual cleaning/wire brushing etc., (and KG
painting except final coat,which will be carried out after completion of the
erection works. Min.hot works will be allowed at site. It is vendors responsibility
toverify the actual measurements at site before making the bolting shedule.
2. PAINTING SPECIFICATIONS :
The cost includes surface preparation by manual cleaning/wire brushing etc..
After surafce preparation two coats surface tolerant epoxy primer @
Top Finish Coat :
2 coats of acrylic aliphatic polyeurethene @ 30 microns per coat.
Total DFT 225 microns minimum.
The rate includes the cost of materials, consumables, labour, tools and
plants,transportation, loading, unloading, machinery, safety requirents,incidental
charges if any, all complete.
Supplying,welding, testing & commissioning of 300 # ASTM SEAMLESS A/B
Shifting of all bends from owners storage point to work site ; fabrication including
cutting; edge preparation; fitup; welding and erection of above fittings on the
pipeline over exisitng pedestals; overheads on racks and at all elevations.This
also includes ;alignment; cleaning and flushing by water;hydrostatic testing as
120 S/F BEND 300# 6-8" specified in tender;draining; drying; completing all such works in all respects as IND
per the specification; drawings and instruction of Engineer in charge.
Payment shall be made on INCH DIA of the welding done on all end joints of
Fittings shall be supplied by contractor.
Size of Bend -150 NB
Supply, Fabrication, welding of WNRF, 300# on the pipelines / fittings using
approved make / size of welding electrode confirming to IS 814; with three or
more runs of weld on the outside including cutting and beveling ends as
necessary; cleaning of internal / external surfaces where welding is to be done;
grinding of welds; etc.; as directed. Clearance at various stages after site
130 WNRF WELD 300# 6-8 inspection is included in the above scope.Radiography if required shall be paid IND
Welding procedure should conform to ASME SEC IX/API
Payment shall be made on the INCH DIA of the flange to be welded.
Fabrication, welding, testing & commissioning of under ground pipeline (IS
1239/3589 supplied by BPCL as free issue material) :
Transporting of all piping items from owners storage point (within plant
premises) to work site ; fabrication including cutting; edge preparation; fitup;
welding and erection of under ground pipeline inside culverts/trenches/hume
pipes/casing pipes at all depths;connecting with equipment nozzles etc. This
also includes alignment; internal cleaning and flushing by water;hydrostatic
testing at 10.5 Kg/cm2,rectification of any leakage & re-testing of pipelines to the
specified pressure ;draining; drying; completing all such works in all respects as
per the specification; drawings and instruction of Engineer in charge.
The job includes 100 % radiography which shall be paid under seperate item of
The scope also includes 100% DP of total butt joints for under ground section.
The other considerations against the above item are also to be noted for quoting
140 . . . PIPE UG API 4-8" INM
& execution purpose,
1. Fabrication of pipeline branches (tapping by making punctures in the
pipelines), stubs,nipples, sampling points, vent points, drain points, are included
in the above scope but shall be paid seperately under other item of BOQ
2.Welding of bends,elbows,reducers,Tees supplied as free issue materials by
BPCL are included in the scope of work but shall be paid seperately under other
3. The work includes wrapping coating as per relevant specification and shall be
paid seperately under other item of BOQ.
4.Water for flushing/Hydrotesting would be arranged by contractor at his own
Payment under this item would be made in INCH METRE DIA of pipeline
excluding the lengths of bends/elbows/reducers/valves/TEE's.
Welding procedure should conform to ASME SEC IX and API
COATING AND WRAPPING:
Supply,Coating And Wrapping By Coal Tar Tape 4 Mm Thick (2mm Thick In
Each Layer As Per IS
Wrapping U/G Pipeline All Oil Grease Rust Scale ,Soil, Dust,mill scale shall Be
removed Before The Pipe Surface Is Primed. The Surface Shall Be Cleaned
again In accordance With The Specified Method as Per IS 10221. Synthetic
Primer Shall Be Applied Immediately After Cleaning. Application Of The
Synthetic Primer Shall Not Be Done On The Moist Surface. The Priming Coat
150 . . . PL WRAPPING COATING M2
Shall Be Provided As Per IS 10221: Uniform And Free From Floods, Runs,
Sags, Drips Or Bare Spots. Any Bare Spots Shall Be Re Coated With Additional
Application Of Primer. All Runs ,Sages, Drips To Be Cleaned And The Cleaned
Area To Be Re-Coated With Primer. Coal Tar Tapes As Per IS 10221 Be
Heated To Applicable Temperature Shall Be Applied With 12 mm minimum
Payment shall be made only for the area covered in M2 excluding overlaps as
per the specifications enclosed with the tender
Scope of work shall be for fixing; testing and commissioning the following valves
/ inline instruments (Gate / Globe / Ball / PLug/ Non-Return /Excess Flow Check
valves,Strainers,Thermal safety valve ) of class 300 rating for LPG service
including isolating; dismantling; re-erecting them whereever necessary during
testing; and including supplying and fixing Spiral wound SS304 or higher with
grafoil as per ASME B16.2 with centering ring and matching with the class of
flanged joint conforming to IS 2712 Gr A/B ; studs; nuts; washers etc. of
160 VALVE 300# SPR 6-8 recommended IS brands like UNBRAKO; TVS; TATA or equivalent (after prior IND
approval from BPCL) confirming to ASTM A 194 GR 2H/ASTM A193 Gr B7
including the cost of transportation of the valves from our stores (within the
site).The lines have to be tested with CAF gaskets and after hydrotesting the
gaskets have to be replaced by SS Gaskets.
Valves shall be hydrotested upto 30 kg/cm2 prior to installation.
Rate to be quoted in INCH DIA for the valve erection.
Size of the valve is 6 Inch
Dismantling of online valves of dia as specified of x300 # rating by removing,
disconnecting nuts, bolts, washers, jumpers, gaskets etc. from its existing
position carefully without damaging the valve and to shift the same to BPCL
170 DIS 300# VALVE <6 IND
nominated place inside the Plant all complete as directed by Site Engineer. The
job includes for all types of valves, NRVs, Hammer blinds and MOVs etc.
Size of the valve 150 NB
Dismantling reinforced cement concrete manually of slabs/shelves/ waist slabs
including cutting andstacking of steel bars, disposal of unserviceable materials
180 DISMANTL RCC outside ourpermises upto 200 mm thick as per direction of Engineer-in- M3
Charge.Note : The rates are applicable for all heights / depths and
floorsincluding scaffolding , etc complete.
Dismantling structural steel work in RS joints, flats, tee and channels
etc.including dismembering at all heights and gas cutting if required and
stacking the serviceable material and disposal of unserviceable material outside
190 DISMANTL STR STEEL the premises to an unobjectionable place to an unobjectionable place to an KG
unobjectionable place as per direction of Engineer-in- Charge.Note : The rates
are applicable for all heights / depths and floorsincluding scaffolding, providing
temporary bracings as required etc complete.
Supplying, fabrication & fixing of copper jumpers for providing electrical
continuity of the pipeline across the flange joint; made from copper flats
200 PL JUMPER 50x3 CU EA
Rates shall be same for all sizes of flanges joints of all pipeline sizes.
Rate to be quoted accordingly.
50mm X 3mm Copper Flat
Testing and Inspection:
Inspection of welding by Radiography Method on all types,sizes,thickness of
pipe welding joints,Butt Welded fittings including processing of Films and
interpreting the same to the Engineer-In-Charge together with recommendation
of sub-contractor as to the acceptability of otherwise of the welds; submitting the
finished radiographic films as may be approved or directed by Engineer-In-
Charge including supply of all
personnel,labour,materials,equipments,consumables,radiographic films and
other inputs and providing all service complete in all respects as required to
perform the work as per specification and instructions of Engineer-in-Charge
210 PL RADIOGRAPHY PL 6" IND
NOTE :(I)Payment shall be done on the basis of numbers of welds of respective
(II) For set-on respective branch welding the rate for radiography will be as
applicable to the branch pipe size.
(III)Repeat radiography of the individual weld due to defective films or repair of
welds shall be done at Contractors cost.
(IV) Radiography not involving full girth weld will paid at 50% of the rate for full
girth weld for the respective size.
(V) All joints shall be radiographed 100%.
VI)Radiography to be done in accordance to API 1104/ASME SEC IX
Engagement Of Third Party Inspection Agency For Inspection Of Piping As Per
The Scope Of Work Defined By
BPCL.The Job Will Be Executed Under Supervision Of TPIA
220 TPIA INSPECTION PIPE The Job Includes all overheads like Travelling / Lodging / Boarding etc and any MDY
other incidental charges.
Note: One Visit Of TPIA Shall Be Considerd As One Mandays (MDY) as per
the BPCL approved Quality assurance plan attached with the tender.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
11311.zip
zip • 3.34 MB
BUDGETDOC_11311.pdf
pdf • 0.12 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .