Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.0 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹28.0 L+₹95,485 (3.53%)Rejected-Finance 46 HUSENI LAKDA BAZAAR 242 BELLASIS ROAD MUMBAI 400008 | MUMBAI | MAHARASHTRA | 400008 | L2 | Rejected-Finance Not Reasonable | |
| 3 | L3₹30.2 L+₹3.2 L (11.9%)Rejected-Finance 5 6 MINTO ROAD ALLAHABAD 211001 | PRAYAGRAJ | UTTAR PRADESH | 211001 | L3 | Rejected-Finance Not Reasonable | |
| 4 | L4₹31.0 L+₹4.0 L (14.8%)Rejected-Finance ATLANTIS A2 1501 PLOT NO 05 SECTOR 11 NEAR CLOUD 36 GHANSOLI NAVI MUMBAI 400 701 E 97 CWE SUBS BHANDUP | THANE | MAHARASHTRA | 400701 | L4 | Rejected-Finance Not Reasonable | |
| 5 | L5₹32.3 L+₹5.3 L (19.4%)Rejected-Finance ROOM NO D 297 PART III GANESH MURTI NAGAR CUFF PARADE ROAD COLABA MUMBAI 400005 | MUMBAI | MAHARASHTRA | 400005 | L5 | Rejected-Finance Not Reasonable |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
29 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh Saurabh Gupta, EE
GE(W) Colaba, Mumbai
REPAIRS AND POLISHING OF OLD WOODEN DOORS, STAIRS CASE AND OTHER CONNECTED WORKS UNDER AGE B/R (WEST) AT COLABA MUMBAI
2023_MES_592798_1
8738/E8
Open Tender
Civil Works
Item Rate
180 days
GE(W) Colaba
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE(W) Colaba, Mumbai
₹90,000
Yes
26 Jul 2023
2 May 2023
31 May 2023
2 May 2023
29 May 2023
15 May 2023
Amount
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area not exc 1.50 Sqm each all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area exc 1.50 sqm but n.exc 4.00 sqm each all as specified and directed.
Taking down shutter of any description area exc 1.00 sqm but n exc 2.00 sqm each all as specified and directed.
Taking down shutter of any description area n exc 1.00 sqm each all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and jointed by inserting 2 nos 150mm long brackets of 15 x 15mm, MS square tube inside 19 x 19mm MS square tube suitably screwed all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for styles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming styles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 all as specified and directed.
M&L PCC 1:2:4, type B1 (using 20mm graded crushed stone aggregate) as in hold fast, bed plates and all other similar works all as specified and directed.
S&F mild steel work in hold fasts, wall ties, pintle hinges and all other similar small articles conforming to Fe-290 Gde-E-165 all as specified and directed.
S&F aluminium anodised 150 mm barrel tower bolts of extruded section all as specified and directed.
S&F butt hinges, stainless steel with mild steel hinge pin, bright polished and fixed, type 75 mm size C21 all as specified and directed.
Taking down cement plaster of any description & thickness from brick/ concrete/stone wall surfaces, including racking out joints, hacking for key and scrubbing down with water all as specified and directed.
M&L for 15 mm thick plastering in cement mortar (1:6) on brick work/ RCC wall and finished the surfaces even and smooth without using extra cement all as specified and directed.
M&L for preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant priming paint all as specified and directed.
S&F 2nd class hard wood plain, solid,straight chowkhat and frames, wrought framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified and directed.
M&L for preparation of wood and wood based materials, new or old, of any description and girth, not otherwise described, and treating ends of posts, back of chowkhats, etc. area tarred exc 0.1 sq m but n. exc. 0.5 sq m each and treated with tar or coal tar black paint all as specified and directed.
S&F 35 mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board with commercial face venners fitted to chowkhats all as specified and directed.
S&F 2nd class hard wood 35mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge, etc. sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a) all as specified and directed. Note : Glass /gaused will be measured and paid separately
S&F 2nd Class hard wood Glazed and skelton shutter 30mm thick open rebated and prepare to receive glass, gauge, etc. with sash bars divided into square with plain chamfered or rounded mitred and rebated sash bars any member as in windows /ventilator styles and rails provided as per SSR part -I Section 8 clause 8.24 (b) all as specified and directed.
S&F 30 mm thick flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both sides all as specified and directed.
S&F 30 mm thick flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both faces is covered with decorative face veneer with lipping/frame to match all as specified and directed.
S&F in repair 18/19mm thick block boards, grade 2 quality, interior grade, commercial type as in cupboard shelves and cupboard shutter fixed with screws to timber frame work with 1st class hard wood leaping all around all as specified & directed.
S&F 100 mm size butt hinges, heavy weight, cold rolled mild steel all as specified and directed.
S&F 75 mm size butt hinges, heavy weight, cold rolled mild steel all as specified and directed.
S&F mild steel 300 mm, ordinary rat tail rod pattern springs, including roler and roller plate all as specified and directed.
S&F 200 mm length aluminium anodised barrel tower bolt extruded section all as specified and directed.
S&F 150 mm length aluminium anodised barrel tower bolt extruded section all as specified and directed.
S&F 125 mm hasp and staples, safty type aluminium anodised with MS hinges pin including bolt to hinge plate and fixed with screw all as specified and directed.
S&F 150 mm long aluminium handles, cast type, anodised all as specified and directed.
S&F 75 mm long aluminium handles, cast type, anodised all as specified and directed.
S&F 300mm long aluminium alloy, anodised sliding door bolt with haps, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy all as specified and directed.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5m in each pane all as specified and directed.
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified and directed.
S&F 150 mm size aluminium plate type II, gate and shutter, hookes and eyes all as specified and directed.
S&F 40 mm dia, cupboard knobs fixed with nuts screws and washers of brass, polished all as specified and directed.
S&F in repairs aluminium (extruded section) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg all as specified and directed.
S&F in repairs Mortice night latch, size 65 mm, mild steel, 4 levers all as specified and directed. Make:-Godrej
M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary paint tint) (each coat) over a coat of pink primer including scafoldings of any height og bldg all as specified and directed.
M&L for preparation of old decorated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary paint tint) (each coat) over a coat of pink primer including scafoldings of any height of bldg all as specified and directed.
S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring overall length of cover plate 140 mm, all as specified and directed.
S&F in repairs floor door stopper of Brass body and tongue, hard drawn steel spring overall length 140 mm all as specified and directed.
S&F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified and directed.
S&F in repairs 20 mm dia decorative fancy type SS curtain rods and all other connected works all as specified and directed.
S&F in repairs 20 mm dia decorative fancy type SS curtain rod brackets all as specified and directed.
S&F anodised aluminium section for doors windows, ventilator door partition including fabrication of frame shutters and fixed with necessary lugs, cleats rollers, handles, locking arrangement etc including all necessary accessories such as glazing clips, provn of AC opening and rubber beading for fixing glass beading for fixing glass panes in frame complete all as specified by Engr-in- charge. Note- (i) Glass panes will be measured and paid separetly. (ii) The quoted rate shall be inclusive of cost of rubber beading and glazing clip hinges, handle however it will not be weighted and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rsate. Make Hindalco/indl/Jindal or equivalent (iv) Gap between wall and aluminium frame shall be filled with silicon filler
M&L 5.5 mm thick sheet glass, ordinary quality and glazing with aluminium beads and rubber gaskit in square exc 0.5 sqm in each pane frosted on one side all as specified and directed.
S&F 15 micron coloured aluminium anodised grill design DG-117, 10 mm thick including F Sections all as specified and directed. Make :- M/s Deco grill / M/s Royal grill or Equivalent
S&F in repairs 15 micron coloured aluminium anodised grill design No DG-117, 10 mm thick including F Sections all as specified and directed. Make :- M/s Deco grill / M/s Royal grill or Equivalent
Demolition of stone slabs and tiles of any description or thickness in floors, aprons, dados etc. laid, bedded and pointed in any mortar and removal of rubbish off the site all as specified & directed.
M&L for machine cut, polished cudappah stone work 20 to 25 mm thick (table rubbed and polished) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in kitchen platform, flooring and all other similar works, including laying over 15mm thick cement mortar (1:6) all as specified and as directed.
M&L for granite (of any approved colour) 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform, flooring and all other similar works, including moulding/rounding the edges of stone, laying over & including 15 mm thick cement mortar (1:6) all as specified and directed.
S&F in repairs sink without drainage board made of stainless steel 1 mm thick 304 grade kitchen or laboratory with plugs, washers and waste pipe including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union to pipe bowl size 535mmx455mmx 203mm glossy finish, etc. all as specified and directed. Make : Cera domino Cat part No B4511103 or equivelant of Bluestar/Nirali / Prayag.
Taking up or down steel tubing and connection including cleaning for refixing or removed to store,15 mm dia bore all as specified and directed
S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors all as specified and directed. Make: Jindal / Tata / Swastik
S&F in repair 15 mm bore fancy type sink cock (wall mounted) with 150mm (6") long swivel spout, wall flange and provision for WP connection, cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule all as specified and directed. Make:- Cera Cat Part No F 2003253 or Equivalent of Jaquar/ Parko.
Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the primises outside the MoD land all as specified and directed.
M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes all as specified and directed. Make : HR Johnson/Rak ceramic / Kajaria.
M&L glazed tiles digital coloured ceramic tiles 300x450x7mm thick in vertical surfaces such as skirting and dado set and jointed in neat cement slurry and pointed in coloured cement to match the shades of the tiles laid over rendering 10 mm thick on fair faces of brick work in CM (1:4) all as specified and directed. Make : HR Johnson/Rak ceramic / Kajaria.
M&L for HDF laminate wooden tiles flooring of size 1215mm x196mm x 8.3mm thick medium emboss anti bacterial and moisture resistant laid over and including foam sheet all as per manufacturers instructions all as specified and directed. Make: Antique / Greenply, samples as approved by GE.
S&F 18mm thick UV coating, HDHMR board exterior grade, including acrylic high gloss sheet of 3mm thick over HDHMR board, anti fungal, moisture resistence, anti borer, as per IS 14587 for frame and shutter for kitchen cabinets/cupboards all as specified and directed . Note:- Sample as approved by GE . Make:-Action tessa/Greenply/ Century
S&F 18mm thick, MDF board exterior grade, both side laminated with any colour anti fungal, moisture resistence, anti borer, as per IS 14587 for kitchen/cupboards shelfs fixing with 1st class hard wood lipping/beading all as specified and directed. Note:- Sample as approved by GE . Make:-Action tessa/Greenply/ Century
S&F in repairs of partial overlay / fully overlay hydraulic soft closing concealed hinges having size 103mm x 64mm finish of nickel/silver all as specified and directed. Make : Godrej Kitchen appliances or other equivalent make as approved by GE.
S&F in repairs of stainless steel cabinet / drawers handle of grade 304 having a length of 250mm and shape all as specified and directed.
S&F in repairs stainless steel modular thali-plate basket SS 304, of size 520x485x200mm, heavy duty and grade steel with finish of zinc, corrosion resistance telescopic drawer soft closing channel having weighing capacity of 25 kg all as specified and directed. Make : Cat Part No-6168 of Godrej Kitchen appliances or other equivalent make as approved by GE..
S&F in repairs stainless steel modular perforated cutlery basket SS 304 of size 52 x 48.5 x 10 cm with heavy duty and grade steel with finish of zinc, corrosion resistance telescopic drawer soft closing channel having weighing capacity of 25 kg all as specified and directed. Make : Cat Part No-6162 of Godrej Kitchen appliances or other equivalent make as approved by GE..
S&F in repairs of stainless steel glass tray plate tray having length of 610mm, corrosion resistance telescopic drawer soft closing channel all as specified and directed. Make : Cat Part No-5796 of Godrej Kitchen appliances or other equivalent make as approved by GE.
S&F in repairs of stainless steel triple cutlery inserts having length of 500mm with telescopic drawer soft closing channel having weighing capacity of 6 kg all as specified and directed. Make : Cat Part No-6408 of Godrej Kitchen appliances or other equivalent make as approved by GE.
S&F in repairs of stainless steel hanging spice rack having three shelf spaces length of 500mm all as specified and directed. Make : Cat Part No-4970 of Godrej Kitchen appliances or other equivalent make as approved by GE.
S&F in repairs of stainless steel grain trolley SS 304 of size 525x485x350mm, with heavy duty and grade steel with finish of zinc, corrosion resistance soft closing telescopic drawer channel having weighing capacity of 25 kg all as specified and directed. Make : Cat Part No-6175 of Godrej Kitchen appliances or other equivalent make as approved by GE.
S&F in repairs of stainless steel slim Ergo single square rail 550mm anthracite finish with heavy duty and grade steel with finish of zinc, corrosion resistance telescopic soft closing drawer channel having weighing capacity of 25 kg all as specified and directed. Make : Cat Part No-4340 of Godrej Kitchen appliances or other equivalent make as approved by GE.
M&L french polishing with two or more coat on new / old surfaces of any description, width or girth after cleaning, fine sanded and making free from any wax and grease, removing it completely (with paint & varnish remover if required) and preparing the surface by filling of open grained with a coat of wood filler and making it smooth mirror like surface using alcohol based shellac finish all as specified and directed.
Demolition of ceiling boards of any description, and any thickness including cover fillets and frame work all as specified and directed.
M&L powder coated aluminium snap grid having a size of 605mm x 605mm and sections incorporated in frame work shall conform to IS 733, IS 737 and IS 1285 and snap grid frame work shall be fixed to ceiling with supporting hanger 6mm dia mild steel rod, J bolts with necessary bolts, nuts and washers all as per manufacturer's instruction. The main & cross tees shall be jointed at junction/crossings with anodized aluminum angle bracket of size 19.05mm x 19.05mm x 1.45mm, weighing 0.14 Kg per RM, fixed with suitable mild steel, bolts, nuts and washer all as per manufacturer's instruction, the snap grid shall be supported at ends all along the wall with anodized aluminum angle of size 38mm x 25mm x 2.18mm, weighing 0.358 Kg per running meter all as specified and directed.
S&F 9mm thick PVC laminated gypsum ceiling tiles size of 600mm x 600mm, square edge, front side laminated PVC and back side aluminium foil all as specified and directed.
Dismantling AC sheet sheeting, any gauge, thickness, roof coverings including scafoldings of any height of bldg all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based trapezoidal/mangalore tiles profile roofing sheets, chajjas, 0.50 mm thick of any colour/length having tensile strength of 550 MPA as in roof coverings having effective & overall width 1015 mm & 1072 mm respectively, profile height 28.5 mm and centre to centre distance between ribs 203 mm fixed with self tapping screws as directed by manufacturer on wooden/steel members including scafoldings of any height of the bldg all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof coverings /claddings to wall, fixed with self tapping screws including scafoldings of any height all as specified and directed.
Dismantling of framed work of timber in scantlings 40 sq. cm and over in section, in any position all as specified and directed.
S&F structural steel work in tubular/square tube trusses including special shaped washer, gusset/bearing plate etc. using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 all as specified and directed.
S&F 12 mm thick plywood, grade BWP type BB fixed with brass screws and cups to timber frame work all as specified and directed : sample as approved by GE. Make- 1 Kitply 2 Century Plywood 3 Archidply 4 Green Ply 5 Anchor
S&F 2 mm thick veneered designer natural wood grain sheet fixed with adhesive as per manufactrue instruction to plywood work all as specified and directed : sample as approved by GE. Make- 1 Novapan 2 Eco Board Industries, Pune 3 Kitply 4 Anchorlam 5 Century Plywood
S&F plain fillets of first class hard wood, square or rectangular in section, clean sawn, wrought, secured with nails or brads; sectional area exceeding 6 Sqcm but not exceeding 13 Sqcm all as specified and directed. sample as approved by GE
S&F decorative fillets of Ist class hard wood, secured with nails or brads; sectional area exceeding 3 Sqcm but not exceeding 6 Sqcm all as specified and directed. sample as approved by GE
S&F in repairs solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing including PVC fillets of width 35mm fixing to the wall to make PVC frame all as specified and directed.
M&L for providing factory made any colour 3- TRACK UPVC SLIDING WINDOW made of UPVC extruded profiles with wall thickness of 2.3 mm (+ 0.2 mm ), window profile with hollow section with multi chamber, frame ( 122 mm x 54 mm ), sliding Glazed sash ( 47 mm x 80 mm ), sliding mesh sash ( 47 mm x 64 mm ), sliding interlock (One vertical length in each shutters ) (50 mm x 36.7 mm ) for mesh shutter & (50.5 mm x 43.5 mm ) for glazed shutter, glazing bead ( 25 mm x 16 mm ) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket, 1.5 mm ( + 0.2 mm ) thick, galvanized steel frame ( 13.5 mm x 34mm x 14.7 mm ) 2 nos, sliding sash ( 20 mm x 33mm x 20 mm ), profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners as per manufacture's specification and direction of Engineer-in-charge. Make - Rajshri and other equivallent
Unitech Enterprises
Frends Enterprises
HINDUSTAN BUILDERS
GANGAJAL
vikas construction
Bidder Name
Unitech Enterprises
HINDUSTAN BUILDERS
Frends Enterprises
SRI SAIRAM COUNSTRUCTION
vikas construction
GANGAJAL
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .