REPAIR AND MAINTENANCE AND REPLACEMENT OF STREET LIGHT, FLOOD LIGHT, TIMER PANEL, HIGH MAST LIGHT, ELECTRIC POLES AND OTHER RELATED WORK IN ARCHARYA ENCLAVE, YASHWANT VIHAR, HARSHAN ENCLAVE I AND II, VIRK ENCLAVE AND MES IB UNDER GE BELGAUM

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in soft/loose soil, for foundation etc., or for laying of cable/ GI Pipe, shafts, wells, cesspits, manholes, pier holes, etc., complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil, as in soft/loose soil, complete all as specified. Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming.

Removal of excavated material [Soil] to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified.

M&L for Dry & clean tibba river sand cushioning in two layers, first layers of 80mm thick before laying of cable and second layer of 150mm thick after laying of cable, levelled and punned down to a depth of 100mm above the top of the upper-most cable, for cable protection in trenches, complete all as specified and as directed. Note: The punned down thickness shall be measured for payment.

M&L for Well burnt old size sub Class ‘B’ bricks, laid dry & flat in trenches for cable protection, complete all as specified.

M&L for PCC 1:3:6, Type C–2, using 40mm graded stone aggregate as in Foundation, Fillings, Mass concrete, Footings for erection of poles, complete all as specified.

M&L for PCC 1:2:4, Type B–1, using 20mm graded stone aggregate as in plinth courses, bed plates, coping etc., including necessary form work etc for erection of steel tubular poles complete all as specified.

S&F Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with MS. clamps, bolts and nuts of approved size, for LT, 20cmx15cm, complete all as specified.

M&L for Boring of road crossing of size 100mm dia at suitable depth by trenchless technology using machinery / equipments complete without damaging the surface for passing pipes / cables etc., with and including provision of HDPE pipe of 100 mm dia, working pressure 0.4mpa including removing excavated soil to a distance n exc 50m, complete all as specified and as directed. Note : (i) Location of boring holes shall be decided by the Engr-in-Charge as per requirement, nothing extra shall be payable on account of variation in length of crossing of road etc., (ii) During boring soil strata may be changed, hence nothing extra shall be paid to the contractor for boring of holes through different strata/different type of soil. Tenderer is hereby advised to keep in mind this aspect while quoting his rate under this item.

Supply, laying, testing and commissioning of LT XLPE insulated, screened with extruded PVC inner sheathed, PVC bedded, galvanised steel strip armoured electric power cable [heavy duty] of size 4.0core x 16.00Sqmm, with stranded aluminium conductor, 1100 volts grade, suitable for earthed system with and including cable glands, ferrules and connected accessories, laid in trenches or ducts or through the pipe etc., including taking down old u/s cable, complete all as specified. Make: Gloster / Poly cab / CCI / Universal / Finolex Note: Necessary excavation & earth work, brick protection & sand cushioning shall be measured and paid separately under respective items.

All as per Serial Item No. 10 here-in-before but for cable of size 4.0core x 25.00Sqmm.

All as per Serial Item No. 10 here-in-before but for cable of size 3.5core x 35.00Sqmm.

All as per Serial Item No. 10 here-in-before but for cable of size 3.5core x 50.00Sqmm.

S&F as in repair of FRLSH PVC insulated sheathed, multi standard, copper conductor cable of size 3.0 core x 1.5Sqmm, 1100 volts grade and including cable glands, ferrules and connected accessories, multi stranded 1100 Volt grade confirming to IS 694: 1977, for electric connection from pole / junction box to street light, complete all as specified and as directed. Make: Finolex/Polycab/KEI

S&F as in repair Street light GI pipe bracket made out of 32/40mm boer dia light grade GI pipe of minimum 1.5m in length, bent to required shape, fixed with 2 sets of MS clamps made out of FI 40x4mm with nuts & bolts and washers etc., applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified. Make of GI Pipe: Tata / Jindal / Prakesh

S&F as in repair of Electric astronomical timer control panel, cubical type, for out door use, dust & vermin proof wall mounted type, made out of CRCA steel sheet with timer switches type 63Amp, 3 pole, 230 Volt, Analog time switch with complete accessories, fixed on pole for switch on/off and control the street light timings including testing, complete all as specified and as directed. Make: L&T / Indo Asian / ABB / Legrand.

S&F as in repair of Electric astronomical timer control panel, cubical type, for out door use, dust & vermin proof wall mounted type, made out of CRCA steel sheet with timer switches type 32Amp, 3 pole, 230 Volt, Analog time switch with complete accessories, fixed on pole for switch on/off and control the street light timings including testing, complete all as specified and as directed. Make: L&T / Indo Asian / ABB / Legrand.

M&L for Preparation of old painted surface of steel tubular electrical pole of height upto the height of 11meters and applying two coats of aluminium paint over a coat of metal primer, including scraping / complete removal of existing paint & preparation and writing pole number by black paint in yellow circle of 150mm dia, complete all as specified and as directed.

M&L for Preparation of old painted surface of RCC electrical pole of height upto the height of 9meters and applying one coat of synthetic enamel paint and writing pole number by black paint in yellow circle of 150mm dia, complete all as specified and as directed.

S&F LED Street light fitting 45Watt, 230 volts, >100lum/W, beam angle of ǿ 120°, AC outdoor type with high Pressure Die Cast aluminium Housing and heat resistant toughened glass with frame complete with LED lamp, driver with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, surge protection 10KV with all accessories, including taking down old u/s SV/MV type street light fitting from pole of any description, complete all as specified and as directed. Make: Cat No. BRP 052 LED 045 CW SLMR FG S1 PSU GR of Phillips or Equivalent in Crompton/Bajaj/Wipro

S&F LED Street light fitting 60/65Watt, 230 volts, >100lum/W, beam angle of ǿ 120°, AC outdoor type with high Pressure Die Cast aluminum Housing and heat resistant toughened glass with frame complete with LED lamp, driver with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, surge protection 10KV with all accessories, including taking down old u/s SV/MV type street light fitting from pole of any description, complete all as specified and as directed. Make: Cat No. BRP062 LED 65 CW SLA S1 PSU of Phillips or Equivalent in Crompton/Bajaj/Wipro

S&F LED Street light fitting 90Watt, 230 volts, >100lum/W, beam angle of ǿ 120°, AC outdoor type with high Pressure Die Cast aluminum Housing and heat resistant toughened glass with frame complete with LED lamp, driver with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, surge protection 10KV with all accessories, including taking down old u/s SV/MV type street light fitting from pole of any description, complete all as specified and as directed. Make: Cat No. BRP062LED 92 CW SLC A1 S1 PSU of Phillips or Equivalent in Crompton/Bajaj/Wipro

S&F LED Aviation light with led number 60Nos in 12 circuit parallel, input voltage 40-58V DC, with polycarbonate glass with housing cast aluminium base frame and red diffuse lens, complete with IP 65/66 protection, including taking down old u/s aviation light, complete all as specified and as directed. Make: Crompton / Philips / Bajaj / Wipro

S&F LED Flood light fitting 120Watts, 230 volts, >100lum/W, beam angle of ǿ 120°, AC outdoor type with high Pressure Die Cast aluminum Housing and heat resistant complete with LED lamp, driver, bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, surge protection 10KV with all accessories, including taking down old u/s SV/MV type street light fitting from pole of any description, complete all as specified and as directed. Make: Cat No. LF20-132-060-57-XX of Wipro or Equivalent in Crompton/Bajaj/Phillips

S&F LED Flood light fitting 150Watts, 230 volts, >100lum/W, beam angle of ǿ 120°, AC outdoor type with high Pressure Die Cast aluminum Housing and heat resistant complete with LED lamp, driver, bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, surge protection 10KV with all accessories, including taking down old u/s SV/MV type street light fitting from pole of any description, complete all as specified and as directed. Make: Cat No. LF20-192-060-57-XX of Wipro or Equivalent in Crompton/Bajaj/Phillips

S&F LED Flood light fitting 200Watts, 230 volts, >100lum/W, beam angle of ǿ 120°, AC outdoor type with high Pressure Die Cast aluminum Housing and heat resistant complete with LED lamp, driver, bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, surge protection 10KV with all accessories, including taking down old u/s SV/MV type street light fitting from pole of any description, complete all as specified and as directed. Make: Cat No. LF20-272-060-57-XX of Wipro or Equivalent in Crompton/Bajaj/Phillips

S&F MCCB 4 Pole, 415Volt, 120/100Amp, breaking capacity 16 kA, adjustable type with O/L, S/C & E/F protection, Icu = 100%, with spreader links, phase barriers and necessary connecting up in DB, testing and commissioning, with and including taking down old u/s MCCB of any type, complete all as specified and as directed. Make: Legrand /L&T/Havells

S&F MCCB 4 Pole, 415Volt, 160Amp, breaking capacity 35/36kA, adjustable type with O/L, S/C & E/F protection, Icu = 100%, with spreader links, phase barriers and necessary connecting up in DB, testing and commissioning, with and including taking down old u/s MCCB of any type, complete all as specified and as directed. Make: Legrand /L&T/Havells

S&F MCCB 4 Pole, 415Volt, 200Amp, breaking capacity 35/36kA, adjustable type with O/L, S/C & E/F protection, Icu = 100%, with spreader links, phase barriers and necessary connecting up in DB, testing and commissioning, with and including taking down old u/s MCCB of any type, complete all as specified and as directed. Make: Legrand /L&T/Havells

S&F MCCB 4 Pole, 415Volt, 250Amp, breaking capacity 35/36kA, adjustable type with O/L, S/C & E/F protection, Icu = 100%, with spreader links, phase barriers and necessary connecting up in DB, testing and commissioning, with and including taking down old u/s MCCB of any type, complete all as specified and as directed. Make: Legrand /L&T/Havells

S&F MCB SP 06 to 32Amp, 10kA, 230Volt, C curve with necessary connecting up in MCB DB, testing and commissioning, fixed in repair, complete all as specified and as directed. Make: Legrand /L&T/Havells

S&F as in repair of Loop in Loop Junction box of size 250x 200x105mm, made out of SMC / FRP with IP 65 protection of thermoplastic circuit breaker boxe suitable for with metric knock outs for cable entry and exit, comb climate Cable Glands of IP66/IP67 for cable entry and Grommets IP 65 for conduit for cable exit with 01 No of MCB, 230Volt, 06Amp, 10KA, 'C' Curve overload and short Circuit protection, with 4 way connector, terminals as bus terminals for cable, for controlling the street light complete clamped to the pole with and including MS clamp made out of flat iron of size 25mm x 3 mm thick fixed with MS nut, bolts and washers including providing the electrical connection for incoming / outgoing cable through proper lugs/thimbles complete all as specified and as directed.all as specified and directed. Make of Box:- Hensel / MECO / Sintex & Make of MCB :Indo Asian/L&T/ABB

M&L for Steel tubular swaged pole complete with MS base plate, finial taper plug, bolts, nuts and screws all as specified type 410 SP-31 (9m long) as per IS-2713 (Part-III) of 1980 and applying three coats of black bituminous paint through out internally and two coats externally on the portion embedded in concrete and applying two coats of aluminium paint over a coat of zinc chrome primer to the exposed surfaces, including dismantling existing u/s street light pole of any type after disconnecting electrical connections and making good the disturbed surface, complete all as specified and as directed. Make: Jindal Steel / National Tubing Co / Bombay Tubes & Store / Calcutta Poles & Tubes Note: Necessary Earth work & Excavation and concrete shall be measured and paid separately under respective items.

S&F Octagonal hot dip galvanized street light pole of 8 meter height, single arm with top dia minimum 70mm, bottom dia minimum 135mm, made with 3mm thick GI sheet, anchor plate & base plate of size 225mm X 225mm X 16mm fixed with 04 Nos of M20 size foundation bolt of minimum length 750mm, internal & external fabrication of the pole shall be in accordance with IS-2629/BSEN ISO 1461, with and including all necessary civil works i.e earthwork, RCC/PCC foundation as per manufacturers design, including dismantling existing u/s street light pole of any type after disconnecting electrical connections and making good the disturbed surface, complete all as specified and directed. Make: Crompton / Bajaj / L&T Note: The contractor shall submit and approve the foundation drawing issued by the manufacturer before starting the work.

S&F GFRP street light pole of 9meter height, with top outer dia 110mm, bottom outer dia 240mm, made with translucent conical pole Glass Fibre Reinforced Polymer matrix fibre (GFRP) combination of Fibre Glass & Resign winding by CNC method, designed & made to sustain a minimum wind speed of 180Km/Hr, GFRP anchor plate & base plate of size suitable size, with LOGO and including fixing fittings fixed & civil foundation as per manufacturers design, including dismantling existing u/s street light pole of any type after disconnecting electrical connections and making good the disturbed surface, complete all as specified and directed. Make: Cat No. Helipole of M/s CNC Technics Pvt Ltd/ M/s RE Ensource / Bajaj / Transrail Note: The contractor shall submit and approve the foundation drawing issued by the manufacturer before starting the work.

S&F Single arm of 01m length suitable for 9metre GFRP street light pole, complete all as specified and as directed.

S&F All-in-One Solar street light 60 watts luminaire output (120 Lumen/Watt) with octagonal GI hot dip galvanised pole of height not less than 5meter and consist of high efficiency LEDs, efficient mono crystalline solar panel confirming to IEC 61215, IEC 61730, IEC 61701 & MNRE certified, new age lithium ferro phosphate battery enclosed in corrosion free IP22 CRCA box with suitable ventilation for fresh air and as per BIS certified and a silicon encapsulated high efficiency MPPT charge controller for high efficiency charge controller to change the batteries intelligent microprocessor algorithms automatic determine sunrise and sunset, along with aluminium housing and in-built PIR motion sensor, with a provision for higher charging efficiency, protection for deep discharge, overcharging etc., fixed with 04Nos of M16x600/EN 8 grade foundation bolt, 1 mtr arm for light fixing & RCC / PCC foundation all as per manufacturer's specifications/ instructions, including dismantling existing u/s street light pole of any type after disconnecting electrical connections and making good the disturbed surface, complete all as specified and directed. Make: Crompton / Bajaj / L&T Note: The contractor shall submit and approve the foundation drawing issued by the manufacturer before starting the work.

M&L for GI Tubing, 40mm bore, Light Grade, conforming to IS - 1239 [Part - 1] fixed to pole or in floors/Walls or under road/drain for protection of cable, complete all as specified and as directed. Make: Tata / Jindal / Prakash

M&L for Earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead 4mm GI wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of SSR Part-I, including excavation / earth work in any strata, adequate quantity of charcoal and common salt, PCC chamber with RCC 1:2:4 type B1 40mm thick cover slab with 8mm dia TMT bars @150mm c/c in bothways, suitable handle and angle iron frame of suitable size to fix the cover, with 20mm bore GI pipe light grade for watering with funnel, wire mesh and 15mm bore GI pipe medium grade for GI wire protection and 4mm GI earth wire, including testing after completion, complete all as specified and directed. Note : Earth wire will be measured after 7.5mtr from the earth strip or earth testing terminal block whichever is lesser under relevant item.

M&L for Disconnecting existing pipe line carefully from main header and dismantling of old u/s MS pipe header from foundation and making of new MS pipe main header with 600mm bore dia MS pipe of 6.35mm wall thick of minimum 6m length for connecting suction & distribution water supply line, with and including suitable flanges along with packing materials, washers, nuts & bolts etc., on both sides of main header, with and including cutting of MS pipe, making suitable size holes and with and including fixing of MS flange of following sizes and connecting to existing pipe line:- (a) 100mm bore dia MS flange -07Nos (b) 150mm bore dia MS flange - 06 Nos (c) 200mm bore dia MS flange - 02Nos (d) 250mm bore dia MS flange - 01No and reconnecting the existing suction & distribution pipe line & carry out the leak test, complete all as required for smooth functioning of pump house. Make of MS Pipe: Tata / Jindal steel / Prakash Note: The quoted rate shall be inclusive of 02 coats of painting on MS pipe with a coat of primer, all DI/GI/MS fittings, welding, flanges etc., as required at site and necessary earth work & excavation, Civil foundation and making good the disturbed surface.

DHAIRYASIL RAMAKANT DESAI (BID ID -3188234)

BRO TECH ELECTRICAL & ENGINEERING SOLUTION (BID ID -3187866)

M/s. VIJAY ELECTRICALS (BID ID -3187744)

Green Ray Enterprises (BID ID -3188785)