138WE/L-14/2025-26

Amount

Labour only for attending of break down/day to day complaint or call on attending any break down or maint work in CHS of Cap 20L kcal/hr located in 153 GH checking the serviceability of AHU's/Boilers/fluid lines/AHU's Motors of any capacity for having continuous serviceability of CHS Plant in 153 GH for any number of time as desired by Engr-in-Charge including servicing of GI Duct use for following of Hot air and replacement of minor spare parts required at site and maint the Fluid Pipe line any where about the premises to have continuous flow of Thermic fluid, repairing the insulation of pipe line of any size ,stopping any kind of leakage from any size of pipe line, tightening the loose electrical connections as related with AHu's Panel / Main Electrical Panel / AHU remote Control Panel including all other related complaints to the entire satisfaction of Engineer-in- Charge complete all as directed at site.

Material and Labour for dismantling of burner rod assy and removing of top cover of boiler capacity 20 lakh kilo/cal/hr model TPA-20/L/P/17 and complete servicing the boiler by using coil shine chemical and removing the complete carbon/oil deposits including repair to coil assy if there is any leakage found and reassembling/testing the same complete all as specified and directed by Engr-in-Charge.

Material and Labour for dismantling of burner rod assy and complete servicing the burner capacity 20 lakh kilo/cal/hr model TPA-20/L/P/17 and removing the complete carbon/oil deposits including repairing the burner and reassembling/testing the same complete all as specified and directed by Engr-in-Charge.

Material and Labour for servicing of Air Handling Unit capacity 15000 CFM including repair to coil assy by welding if there is any leakage found and testing the same, replacement bearings of motor capacity 7.5 HP/10HP, reassembling/ testing the same including painting of AHU with two coats of aluminium paint over a coat of red oxide primer and cleaning of AHU room complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 4 here-in-before but of capacity 10000 CFM with electric motor 5.5 HP complete and and cleaning of AHU room complete all as specified and directed by Engr-in-Charge.

Supply only V Belt B-77/B-100 suitable for AHU as per sample all as specified and as directed.

Supply only fuel injection nozzle suitable for working on 20 Lac K Cal/Hr oil fired hot water boiler capacity burner complete all as specified and directed.

Material and Labour for control wiring of complete AHU of capacity 15000/10000 CFM connecting blower motor of capacity 7.5/10 HP with auto control panel with PVC Copper conductor of not less than 4/6 Sqmm. Make : Finolex/Havells or equivalent make approved by GE including binding of complete wiring with tie, concealed channel as required at site complete all as directed and testing to the entire satisfaction of Engr-in-Charge.

Material and Labour for removing of old unsv refractory compound from Diesel /oil fired hot water boiler at 153 GH and applying the same evenly inside the surface of oil fired hot water boiler with Refactory compond complete all as directed.

Supply only star coupling with Rubber Love joint coupling F 225 Suitable for 60 HP TF Pump

M& L for welding work as per site reqmt to Leakge in steel pipe complete all as specified and directed by Engr in Charge.

Material and Labour for servicing to the modulation assembly including replacement of fuel control valve or any other spares required for smooth functioning of modulation assy all as specified and directed by Engr-in-Charge.

Material and Labour for complete servicing to the thermic fluid pump and electric motor of capacity 60HP 2960 RPM, by following services:- (i) Replacement of bearings,oil carbon glands seal or any other spares required for smooth functoning of pump,complete all as specified and as directed. (ii) Repair/replacement of Impeller suitable for 60 HP centrigugal pump. (iii) Repair/replacement of Pump Shaft including steel gland bush suitable for Centrifugal pump of capacity 60 HP

Material and Labour for Cleaning of Thermic fluid pipe line ducts complete including removing of wastage sand stone, etc. all as specified and directed .

Supply only High Pressure fuel pipe1.5 Mtr length as per sample complete all as specified and as directed.

Supply and fixing in replacement of old unsv off load change over of capacity 1000 Amps, 4 Pole complete all as specified. Make: Havells/L&T or equivalent make approved by GE

Material and Labour in replacement of galvanised Iron pipe medium grade of size 150 mm dia complete with all fitting and fixed complete to walls and ceillings or laid in floors complete all as specified and directed by engr in Charge.

Material and Labour in replacement of sluice valve Class PN 1.6 of size 150 mm dia complete with all fitting and fixed complete to walls and ceillings or laid in floors complete all as specified and directed by engr in Charge.

Material and Labour in replacement of sluice valve Class PN 1.6 of size 50 mm dia complete with all fitting and fixed complete to walls and ceillings or laid in floors complete all as specified and directed by engr in Charge.

Material and Labour in replacement of Insulation of M S Pipe with PUF slab 40 mm thick with and including applying bituminuous compound and GI cladding with 26 gauge GI sheet complete of size 150 mm dia complete all as specified and directed by Engr-in-chage

Material and Labour for cleaning of MS diesel storage tanks of capacity 2500 ltrs by removing of sludge from tank and scraping the side walls by means of wire brush or emery paper and wash the same with castic soda and clear water and painting the internal walls with two coats of black rubber emulsion paint and painting the complete tank from out side with two coats of synthetic enamel paint complete all as specified and directed.

Material and Labour for cleaning of MS diesel storage tanks of capacity 50000 ltrs by removing of sludge from tank and scraping the side walls by means of wire brush or emery paper and wash the same with castic soda and clear water and painting the internal walls with two coats of black rubber emulsion paint complete all as specified and directed.

Supply and fixing in replacement of diesel pump 3 way with 1.5 HP Motor,3 Phase 415 Volts suitable for boiler capacity 20 lakh kilo/cal/hr model TPA-20/L/P/17 all as per site requirement complete all as directed by Engr-in-Charge.

Supply only diesel filters for boiler capacity 20 lakh kilo/cal/hr Model TPA-20/L/P/17 complete all as directed by Engr-in-Charge.

Supply only contactor MNX 70 three pole 100 Amps 415 volts complete all as directed by Engr-in-Charge. Make : L & T /Schneider or equivalent make approved by GE.

Supply only pressure guages 0 to 25 kg/cm sq as per existing complete all as directed by Engr-in-Charge.

Supply only digital type volt meter complete with touch control switch 0 - 500 volts complete all as directed by Engr-in-Charge.Make : AE/L&T/ Schneider

Supply only digital type Amp meter complete with touch control switch and suitable CTs 0 - 300 Amps complete all as directed by Engr-in-Charge. Make : AE/L&T/ Schneider

Supply only indicating lamps RYB as per existing complete all as directed by Engr-in-Charge.Make : AE/L&T/ Schneider

Supply and laying cable XLPE Insulated screened PVC bedded galvanized steel strip or wire armored, electric power cables (heavy duty) 11000 Volts grade with standed aluminium conductor of following sizes 185 sqmm 3.5 Core laid in trenches or passing through pipes ducts or fixed to walls/poles including taking down old cable complete all as specified and directed. Make : Cable corporation of India/Havells India Ltd/Universal Cables Ltd/ Polycab/RPG Cables/Gloster/KEI

Supply and Fixing in replacement of old unserviceable Air Pre filter including alluminium/stainless steel frame of size 20"x20"x2" for existing AHU unit of capacity 10000 CFM complete all as specified and directed.

Supply and Fixing in replacement of old unserviceable main air filter including alluminium/stainless steel frame of size 20"x20"x6" for existing AHU unit of capacity 10000 CFM complete all as specified and directed.

Supply and Fixing in replacement of old unserviceable Air Pre filter including alluminium/stainless steel frame of size 24"x20"x2"for existing AHU unit of capacity 15000 CFM complete all as specified and directed.

Supply and Fixing in replacement of old unserviceable Main air filter including alluminium/stainless steel frame of size 24"x20"x6"for existing AHU unit of capacity 15000 CFM complete all as specified and directed.

Material and labour for rewinding of electric motor 3 phase 415 volts of capacity 60 HP with superior quality super enameled copper winding wire of appropriate size and gauge as existing including suitable size of Bearings ,varnishing, cotton tape, PVC sleeves etc complete all as specified and directed.

Supply only push botton type ON/OFF switches as per existing complete all as directed by Engr-in-Charge.

Supply only Bearings of model UC-208 as per sample complete all as specified and directed by Engr in Charge.

Supply only contactor ML-3, 220 volt 50 Hz Make : L&T suitable for TF pump panel incl testing and commissioning etc all as specified and as directed.

Supply only Thermal over load relay MN2 type 6 to 10.0 Amps . Make- Siemens/L&T , complete all as specified and directed.

Supply only Thermal over load relay 10 to 15.0 Amps .Make- Siemens/L&T, complete all as specified and directed.

Supply only timer 30 to 120 seconds delay for Main control panel complete all as specified and as directed. Make : L&T/Siemens or equivalent make approved by GE

Material and labour for rewinding of electric motor 3 phase 415 volts of capacity 10 HP with superior quality super enameled copper winding wire and replacement of bearings of appropriate size and gauge as existing including varnishing, cotton tape, PVC sleeves etc complete all as specified and directed.

Material and labour for rewinding of electric motor 3 phase 415 volts of capacity 7.5 HP with superior quality super enameled copper winding wire and replacement of bearing of appropriate size and gauge as existing including varnishing, cotton tape, PVC sleeves etc complete all as specified and directed.

Material and labour for rewinding of electric motor 3 phase 415 volts of capacity 5 HP with superior quality super enameled copper winding wire and replacement of bearing of appropriate size and gauge as existing including varnishing, cotton tape, PVC sleeves etc complete all as specified and directed.

MALIK CHAND SIRI RAM (BID ID -3326479)

national engineering (BID ID -3318974)

EESSI (BID ID -3317508)

Bidder Name

S S BUILDERS