Work of interlocking tiles on the road and side by hotmix plant from house no. 17/6 to 27/6 in ward 26 Shastri Nagar Sector.-6.

Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.25 kg per SQM on the prepared bituminous surface cleaned with mechanical broom.

Providing and laying bituminous concrete with 100-120 TPH batch type H.M.P. producing an average output of 75 tone per hour using crushed aggregates from approved quarry of specified greding premixed with bituminous binder VG- 30 @ 5.40 per cent of mix and filler transporting the hot mix to work site layig with a hydrostatic paver finisher to required grade level and allgnment, rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compaction (Ref. to mort & h specification No. 509.) adjustment for bitumen shall be done as per lob mix formula and Engineer-in-charge letter no 2651 Date 27.07.2012

Providing & laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms /sq.mt. area . Thickness of 2.5 mm inclusive of surface applied glass beads as per I.R.C uniform and free from steaks and holes.

providing & laying cateyes reflective pavment marker twin shanks of adequeate length anchored with epoxy/bitu ASA HIPS support a load 13.635 M.T.its reflective lens its body 130x20x105 mm reflective each surface shall not be less than 13 sq.cm.

Dismentling of Old interlocking tiles with all comp.S.I No.New Item 4

M-150 Brick work in 1:4 one cement and four course sand, mortar in foundation in plinth including suopply of all material labour, T &P etc. required for proper completion of the work. SIN No- 305(A)

Cement Concrete with 2 cm gauge approved graded stone grit, coarse sand and cement in the proportion of 4:2:1, including supply of all materials, labour, tools & plants etc required for proper completion of the work As per direction of E/I. [S.I No. 279(a)]

12 mm thick plaster with cement and approved coarse sand mortar in 1:4 over brick work minium thickness not to be less than 1 Cm including supply of all material labour Tool & Plants etc. required for proper completion of the work. SIN No-584(A)

Supply and stacking of hard stone 22.4 -53 mm gauge stone ballast i/c All comp work

Consalidation of stone ballast excluding of roller charges and excluding all SIN.755(B)

Supply of 80 mm thick ISI marked I shaped mechanicaly compressed interlocking cement concrete paver blocks manufatactered by high prussureand control vibration machine having plan dimension 200 x (160+120 mm )with minimum 5 mm thick topping of O.P. cement mixed with 25 %marble powder . The compresive strenth of concrete paver block shall not be less than 30 Mpa and 4.50 kg per no. including cost of all material labour T& P etc required for proper complition of work new item no-14 Work should be done with colour tiles.

Deduction cost of old C.C. Tiles in all comp

Supply/ fixing of black granite stone sign board with cutting of given maters as per direction of engineer in charge in all complete