Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.3 LAccepted-Finance | ₹4.3 L | L1 | Accepted-Finance Being L1 |
| 2 | L2₹4.4 L+₹12,249 (2.84%)Accepted-Finance | ₹4.4 L+₹12,249 (2.84%) | L2 | Accepted-Finance Being L2 |
| 3 | L3₹4.9 L+₹60,729 (14.1%)Accepted-Finance | ₹4.9 L+₹60,729 (14.1%) | L3 | Accepted-Finance Being L3 |
| 4 | L4₹5.4 L+₹1.0 L (24.3%)Accepted-Finance | ₹5.4 L+₹1.0 L (24.3%) | L4 | Accepted-Finance Being L4 |
Tender Value
₹4.9 L
Closing Date
29 Apr 2021, 10:00 amClosed
Executive Engineer
EE,CD,APWD,Kamorta
Construction of 250 MT RCC Godown for Civil Supply department at Katchal including construction of CC Footpath and RCC compound wall Sub Work Providing IEI and EEI
2021_APWD_2901_1
32/NIT/DB/CD/KMT/2020-21
Open Tender
Electrical Works
Works
60 days
Katchal
Please refer tender document
5 documents required · 5 mandatory
₹0
Exempted
17 May 2021
12 Apr 2021
29 Apr 2021
12 Apr 2021
29 Apr 2021
12 Apr 2021
Amount
Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc as reqd. 'Group C'
Wiring for Circuit / Sub Main wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed PVC conduit as required.
a) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire
b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire
b) 2 x 4 sq.mm + 1 x 4 sq.mm earth wire
Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings).
Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.
Supplying and fixing 3 pin, 5 amps ceiling rose on the existing junction box / wooden block including connection etc as required.
Supplying and fixing brass batten/ angle holder including connection etc. as required.
Supplying of pre-wired for LED, power saving Decorative box type LED tube Batten fittings, 4' powder coated for LED tube 1x 20 W with ISI standards similar to HAVELLS regal batten T8 upto 1X22w and crystal glass T8 LED tubelight G13 lamp holder of 20w or equivalent.
Supplying of LED Retrofit Bulbs 9 Watts B22 (Cool Day Light) with ISI standards . Similar to HAVELLS ADORE 9W CDL or equivalent.
Supplying of Energy Saving 5 star rating, with ISI, A.C. Ceiling fan 1200 mm sweep,with all accessories and Step type electronic Fan regulator. (Similar to HAVELLS Efficiencia neo BLDC 26W 5 star).
Installation, testing and commissioning of ceiling fan, including wiring with the down rods of standard length (up to 30 cm) with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
Installtion, testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connection etc. as required.
Supplying of Integrated LED Bulk Head Luminaire, 10w comprises of PDC Al housing and milky diffuser similar to C&S SIRIUS Series LED Bulk Head CAT No: LTB10WLED or equivalent.
Supplying of Exaust fan of size 300 mm sweep, Metallic Blades with protective bird guard (similar to HAVELLS Ventil Air DB or equivalent with ISI).
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
a) Upto 450 mm sweep
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
Supplying and fixing of Decorative gate light made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 base with mounting pole dia - 60 mm od along with 20w LED bulb similar to HAVELLS mushroom (Prismatic) LED Gate lamp and LED Bulb similar to LED Adore 20 W CDL 3 Star B22 lamp or Equivalent and wiring with 1.5 sq.mm PVC copper cable in medium class PVC conduit as required.
Supplying of LED floodlight 20W with IP65 protection with ISI standards Similar to HAVELLS Centura plus LED floodlight or Equivalent.
Supplying of 2 cored PVC insulated and FR PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volt of size 6 sqmm with ISI standards Similar to HAVELLS Multicore round or Equivalent.
Supplying of 2 cored PVC insulated and FR PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volt of size 2.5 sqmm with ISI standards Similar to HAVELLS Multicore round or Equivalent.
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required
Upto 35 sq. mm
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.
Upto 35 sq. mm (clamped with 1mm thick saddle)
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
63 mm dia (OD-63 mm & ID-51 mm nominal)
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
Supplying and fixing of prewired pressure die cast compact Aluminium housing LED street light luminaire 25 watts with driver with IP 65 protection similar to C&S DRACO Series cat No LTESS25WLED or equivalent.
Manufacturing and Supplying of metallic street light pole made out of an overall length of 5 meters long having a bottom section length of 3.00 meters with 80 mm dia 'B' class ISI marked G.I Pipe and top section length of 2 meters with 50 mm dia 'B' class ISI marked G.I Pipe with earth stud and necessary GI reducer/coupling fixed at the top & Middle and 300 mm x 300mm x 6mm thick MS base plate welded to the bottom i/c one coat of metalic primer and 02 coat of water proof paint etc. as required.
Erection of metallic street light standard pole of length exceeding 4.5 mtrs but not exceeding 6.5 mtrs in cement concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 40 mm nomonal size) foundation with cement concrete collar of size 0.4 m dia. x 0.5 m hieght to accommodate the looping type cable end box including excavation and refilling etc. as required.
Supplying and fixing street light bracket made out of 40 mm dia. 1.0 mtr. Long 'B' class GI pipe ISI marked on the existing street light pole for mounting of LED/ fluoresent/ HPMV / HPSV street light fittings with suitable size collar at the top including bending the pipe to the required shape wiring with 1.5 sq.mm PVC copper cable in medium class PVC conduit as required.
Providing and fixing pole mounting weather proof cable looping loop out box made out of SMC and of size 280 mm x 170 mm x 130 mm out side and 240 mm x 130 mm x 110 mm inside for providing with hinged door and locking arrangements i/c providing and fixing the following mounting and fixing the box in to the cement concreate collar / street light pole with suitable bolt & nuts.
Din channel 6 A SPMCB (Indoasian/Havells etc) 63 A rating modular connector 4 way (similar to connect well make-01 No.)
Supplying ,installation on wall ,testing and commissioning of 24 Hrs Digital timer unit of 32 Amps TP,230 volts with 40Amps SPN MCB of maximum load capacity of 6 KW.Equivalent to Havells cat No:-IHXSS01060. make: Indoasian/Havells/Legrand.
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
a) 8 way, Double door
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
a) 4 way (4 + 12), Double door
Supplying and fixing 5 amps to 32 amps rating, 240 /415 volts, 'C' curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. A) Single pole
Supplying and fixing following rating, double poles, 240 volts, isolater in the existing MCB DB complete with connections, testing and commissioning etc. as required.
a) 40 Amps
b) 63 Amps
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.
KHODIAR DEVICES
A Fakrudeen
AKABEA INFRASTRUCTURES PRIVATE LIMITED
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .