CERTAIN MISC B/R WORK FOR E/M INSTALATION (EXTERNAL WATER SUPPLY AND EXTERNAL ELECTRIC SUPPLY) AT DOMESTIC/TECHNICAL AREA AT AFS YELAHANKA

Amount

Dismantling fencing wiremesh ,barbed wire any type all as specified.

Dismantling posts or struts (wood, steel or R.C.C.) embedded in Concrete,brick work,masonry ,etc any section, including taking out embedded portion and making good disturbed ground.

Excavating in post holes (or similar holes) in soft/loose soil each n. exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface.

M&L for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete

Supply only Chain Link MS galvanised fencing , any size or type, all as specified and directed.

Fixing only chain link fencing including line wires, any mesh , size and type to any type of standards , rails , straining bolts, etc. including provision of binding wire, all as specified and directed.

S&F posts and struts in fencing including cutting tops to shapes as directed, drilling holes notching for wire etc flat iron fillets (for securing wire mesh etc including all necessary drilling, bolting or rivetting etc and similar work confirming to Fe-290 Gde E-165)

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but n exc 10 cm long ,diameter of neck 5 to 10 mm.

M&L for Mild steel deformed bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified .

M&L for 75mm thick Cement concrete 1:4:8, type D2 ,using 40mm graded stone aggregate as in sub-base in floor finishess

M&L for 100mm thick Plain Cement concrete 1:2:4, type B1 using 20 mm graded stone aggregate as in floor.

M&L for chequered tiles of size 300x300x25 mm thick, set and jointed in neat cement slurry in floors and pointed in white or coloured cement to match with grey pigment cement and pigments including 15mm thick screed bed 1:6 CM all as specified and directed.

M&L for hard core of broken stone and boulders gauge n exc 60mm deposited spread and levelled in layers n exc 15cm thick watered and rammed to a true surface

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in coping, benching and similar works including weathering slightly rounded on chamfered angle and throating all as directed

S&F Roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beams, tee, angle, channel or flat sections) including distance piece, cleats etc Fe 410-W (Gde - E - 250) Quality 'A'.

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3kg of cement per sqm

S&F 1000 ltrs capacity Rotational moulded polythene water storage tanks (cylindrical vertical with closed top, two layers) hoisted and fixed in position including dismantling of old tank complete all as specified.

Taking down door chowkats or frames not exceeding 1.5 sqm with shutters (without taking off shutters from the frame) of any description

All as per item No 18 above but exceeding 1.5 sqm but not exceeding 4 sqm

Taking down shuttes of any description exc 1 Sqm and n.exc 2 Sqm, all as specified and directed.

Taking down shuttes of any description n exc 1 Sqm all as specified and directed.

Taking down shuttes of any description and refixing in the same opening after necessary easing and cutting all as specified and directed.

S&F II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.

M&L for 12mm thick block boards grade 2 quality, interior grade decorative type with decovative face veneer on one face, fixed with screws to timber frame work all as specified and as directed fixed in repairs

M&L Cover fillets of standard 4.5 mm thickness hard board, 40mm wide,and fixing with screws.

S&F 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete.

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

S&F 35mm thick 2nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc divided into squares,with plain,chamfered or rounded,mitred and rebated sash bars,any numbers,edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 and fitted to chowkats.

M&L for preparing new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-21 all as specified and directed.

S&F aluminium alloy anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheets , cast or extruded section and fixing bolt and sliding bolts of extruded section.

S&F aluminium anodised, barrel tower bolt 150mm of extruded section.

S&F for aluminium handle 150mm cast type anodised.

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate.

S&F Butt hinges, medium weight, cold rolled, mild steel 75mm long (ISI marked), complete all as specified.

S&F Aluminium anodised, barrel tower bolt of extruded section and fixed, 100mm long (ISI marked), complete all as specified.

S&F Extruded aluminium alloy handle, fabricated type 'D', anodised, 100mm long (ISI marked), complete all as specified.

M&L for Steel rolling shutters, 1.00 mm thick with out ball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indi cated, complete: push pull or manual type

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm all as specified and directed.

M&L for sand laying on ground around the transformers,required thickness complete all as specified and as directed

M&L for aggregare for loose filling of gauge 20 to 40 mm graded all as specified and directed by Engr-in Charge.

S&F in repair galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire,staples or steel pins,etc. as directed.

All as per item no 42 above but except barbed wire including restraininig & resecuring of existing barbed wire including making good staples etc

Demolition for cement Concrete un reinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound,Grade 'A'.

M&L for 40mm Thick Cement concrete 1:2:4 ,type B-1 using 20mm graded stone aggregate as in floor, finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection and paving finishing surface even and smooth without using extra cement complete all as specified and directed.

Cutting small plants,shrubs, grass and vegetation etc, along the percolation tank, semi under ground tank, UG sump and electrical transformer flatform surroundings etc, and stacking into heaps and removing of the premises complete all as specified and directed.

Demolition of brick work or stone masonry built in CM including all quions all as specified

M&L for pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in CM 1:6 type C1 1:3:6 (using 20 mm graded stone aggregate) complete all as specified.

Dismantling plain or corrugated steel sheeting, any gauge, thickness,including Nainital or similar pattern roof coverings.

S&F pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F framed work as grills,gratings etc. with emds of bars shouldered and /or riveted or forged into spikes conforming to Fe 290 Gde E-165 complete all as specified.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240, complete all as specified.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for preparation of new steel surfaces including filling with filler wherevere required and applying two coats of synthetic enamel paint on new steel surfaces of any description over 10 cm width or girth,not otherwise described over a coat of red oxide primer complete all as specified and directed

All as per item no 57 but on steel surfaces of width n exc 10 cm complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 & 8 mm thick area of ech tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile incl screed bed 15 mm thick in CM (1:6) complete all as directed and specified.

M&L for Non skid coloured Ceramic tiles 7 to 8 mm thick and area of each tiles not exceeding 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile over 15mm thick screed bed in CM 1:6 all as specified and directed.

M&L for Glazed coloued Ceramic tiles of size 350X250X7mm/450X350X7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting/dado over 10 mm thick plaster in CM 1:4 finished all as specified and directed .

M&L for Complete removal of existing wall surface finish and applying two coat of oil bound distemper all as specified and directed.

M&L for Complete removal of existing wall surface finish and applying one coat of oil bound distemper all as specified and directed.

M&L for Complete removal of existing surface finish and applying one coat of oil bound distemper on ceiling surfaces all as specified and directed

M&L for preparation of surface and applying two coat of White wash on old wall surface all as specified and directed.

M&L for preparing old painted wooden surface and applying one coat of Synthetic enamel Paint all as specified and directed.

M&L for preparing old painted steel surface and applying one coat of Synthetic enamel Paint all as specified and directed.

M&L for preparation of the old surfaces unplastred of wall complete removal of existing treatment applying two coat of cement base paint ,complete all as specified and as directed.

M&L for preparation of surfaces of old decorated wall and applying one coat of exterior paint complete all as specified and directed.

Taking down cement plaster from walls of any description all as specified and directed.

M&L for 10mm thick cement plaster in CM 1:6 on brick work or concrete surfaces and finish the surfcae even & smooth without using extra cement on internal walls

M&L 15mm thick cement plaster in CM 1:4 on brick work or concrete surfaces and finish the surface even & smooth without using extra cement on external wall

M&L for preparing the new surfaces of wall and applying two coats of oil bond distemper over a coat of interior wall care putty 3mm thick all as specified and as directed

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint on walls incl priming surfaces with alkali resistant priming paint etc complete all as specified and directed.

S&F in repair washdown water closet orissa pattern size 580 x 440 mm white with integral foot rest and trap, including connection to drain and to flushing pipe including making good to floor and flush pipe and joint between flushing pipe and socket complete all as specified and as directed.

S&F in repairs 10 litre capacity PVC syphonic action type low level flushing cistern including all fittings and including flushing pipe fixed in repair all as specified and as directed.

S&F in repairs vitreous china wash basin, white or coloured of size 550 x 400 mm with pedestal including brackets all as specified and as directed.

S&F in repair Pillar tap 15mm bore fancy type chromium plated, with capstan head screwed down high pressure with or without lettered “Hot or cold” completed all as specified.

S&F in repair Bib taps chromium plated 15 mm bore with fancy type with capstan head handle screwed both ends for iron pipe or for union complete all as specified.

S&F in repairs Stop valve 15mm dia, concealed type chromium plated fancy type with long shank and cup complete all as specified .

S&F in repairs 15mm dia angle valves, cast copper alloy, CP, screwed down, high pressure, with crutch, screwed both ends for iron pipe or for unions complete all as specified.

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe complete all as specified.

Dismantling water tanks upto 500 litres capacity

S&F 500 ltrs capacity Rotational moulded polythene water storage tanks (cylindrical vertical with closed top, two layers) hoisted and fixed in position complete all as specified.

S&F 20mm dia nipple suitable for water tank.

Supply and Fixing in repairs PVC connection 15mm size with PTMT Nut of length 600mm complete all as specified and as directed .

Supply and Fixing of 32mm waste pipe for wash hand basin all as specified and as directed

S&F CP towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats fixed in repairs.

S&F PVC floor trap 110mm dia, with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B1 using20 mm graded stone aggregate complete all as specified and as directed.

S&F PVC(SWR) floor trap 75mm dia, with grating including jointing to waste pipe fixed in solvent cement

S&F in repairs CP grating size 100mm all as specified and directed.

M&L for cutting holes in brick/stone walls built in CM for inserting hold fast and making good dismantled portion in CM 1:3 or PCC 1:2:4,type B0, using 12.5 mm graded aggregate,¸depth of embedded portion of hold fast not exceeding half brick complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including neccessary fitiings etc complete as specified and directed.

M&L for repair/replacement of parts of rolling shutter to make shuter functional including greasing, easing, oiling, changing of spring including making good of existing surface etc as specified and directed by Engr-in Charge

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone concrete glazed with oil putty or fixed with beeds.

S&F sheet glass ordinary quality 4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane all as directed by Engineer-in-Charge

All as item 99 above but figured glass pin head type.

M&L for Keyed pointing in Cement mortar 1:4 to random or polygonal rubble masonry all as specified and directed.

Taking up or down 15mm steel tubing and connections all as specified and directed.

S&F 20 mm dia of CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors complete all as specified.

M&L for painting of ceiling/exhaust fans complete, in situ with one coat of synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc. complete all as specified and as directed by the Engr-in-Charge. Note : White paint to be used for ceiling fans and grey/sky blue paint to be used for exhaust fans.

Disconnecting and taking down the ceiling fan 1200/1400mm sweep carefully dismantling blades and removing fan complete, servicing by cleaning and greasing the bearing/bush and replacement of split pin, replacing unserviceable items like bearing, bushes, rubber real, condenser, flexible cable, canopy, blades etc., assembling, refixing after complete servicing in the original place connection and testing complete all as specified and as directed by the Engr-in-Charge. Note:- (1) Sparts like bearing,bushes,condenser,canopy, blades etc shall be supplied and paid seperately under relevant items, fixing charges for the same is included in this item.

All same as per item No 105 here-in-before but exhaust fan 280/300/450 mm sweep

All same as per item No 105 here-in-before but wall mounted fan 300/400/630 mm sweep

Supply only ball bearing for 1200/1400mm sweep Make :- TATA/ SKF/NBC

Supply only ball bearing for Exhaust fan 280/300 /450 mm sweep Make:- TATA / SKF/NBC

Supply only ball bearing of suitable size for wall mounted fan of 300/400/630 mm sweep Make:-SKF/TATA

Supply only gun metal bushes for 1200/1400mm sweep ceiling fan

Supply only condenser 2.5/3.5 Mfd for ceiling fan

Supply only of canopy for 1200/1400 mm Sweep ceiling fan

Supply only blades suitable for 1200/1400/1500mm sweep ceiling fan set of 3 blades.

Supply only blades suitable for Exhaust Fan of size 280/300/450 mm sweep

Supply only blades suitable for Wall mounted fan of size 300/400/630 mm sweep

Supply and replacement down rod for ceiling fan with 15mm dia GI pipe medium grade ,screwed and drilled with clamps rubber real ,nuts,bolts, and safety pin,etc including painting ,up to 3 mtrs height.

Collecting the burnt ceiling fans including blades of any make from AGE E/M store yard/ site, bring to reputed work shop/in-situ, dismantling removing the burnt winding, rewinding of ceiling fan with super enameled copper conduct winding wire of same gauge, insulating, varnishing including replacing of wornout bearing/bush greasing assembling and transporting the same and fixing and testing at site all as specified and as directed by Engr-in-charge.

1200 mm Sweep

1400 mm Sweep

All same as per item No 118 here-in-before but Wall mounted fan 300/ 400mm sweep

All same as per item No 118 here-in-before but Exhaust Fan of size 280/300 mm sweep

All same as per item No 118 here-in-before but Exhaust Fan of size 450mm sweep

Taking down opening and inspection of storage type water heater of size 25/50ltrs capacity and discaling with dilute hydrochloric acid, checking for water tightness of the inner tank, cable continuity, thermostat most of setting at 70 degree C checking fusible plug, stop cock including replacement of indicator lamp, rubber PVC gasket washers reassembling and refixing at old place and replacing unserviceable bolts and nuts, cementing work including hydraulic pressure testing with hand operated hydraulic pump complete after repair including spray painting with one coat of approved DUCO paint after preparation of surface Note : (a) Replacement of unserviceable items like heating element will be measured & paid separately. (b) Charges for repalcement of Glass wool,Hot cold pipe etc are included in this item.

Supply and fix heating element including rubber/PVC gasket of the following all as directed including rubber washer 1.5KW / 2 KW any type

Opening, removal, testing and repalcement and calibration of thermostat of the geyser including rubber gasket and setting temperature between 70 degree C to 80 degree C for capacity of 25/50 Ltrs.

Checking thermostat calibration only of the geyser 25/50 ltrs capacity and setting temperature between 60 degree to 70 degree complete all as directed.

Material and Labour for disconnecting from Electric and water mains and dismantling the unserviceable gyeser base assembly and replacing the new base assembly with rubber gasket for 25 Ltrs capacity of any make and refixing in original place including recoonecting of electric and water supply mains including testing complete all as speicifed and directed by Engr-in-charge.

All same as per item No 126 here-in-before but 50 Ltrs capacity

Material and Labour for Brazing of Storage Type water heater (Geyser) to stop leakage and testing of any capacity and make after completion upto the satisfaction of concerned JE/ Engr-in-Charge. Note :- Disconnecting and reconnecting of geyser (water and electric ) is included in unit rate.

Supply and fix Non Return Valve for 25/50 Ltrs capacity of existing type and make complete all as specified and directed by Engr-in-charge.

Supply and fix copper tank for 25 Ltrs capacity of existing type complete all as specified and directed by Engr-in-charge.

All same as per item No 130 here-in-before but capacity 50 Ltrs

Supply only PVC connections 15 mm size with PTMT nuts of length 450 mm length (for hot and cold water inlet and outlet) complete all as specified and directed by Engr-In-charge.

All same as per item No 132 here-in-before but 0.9/1m length.

Supply and fix in repair electronic meters temper proof, LCD display with polycarbonate cover single phase, 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH. NOTE:- old/unservicable energy meters shall be deposited to E/M store.

All same as per item No 134 here-in-before but 3 Phase, 415 volt

M & L for glass wool packing required quantity for covering the 25 ltrs copper shell to avoid the heat conduction .

M & L for glass wool packing required quantity for covering the 50 ltrs copper shell to avoid the heat conduction .

Supply and fix metal louvers of suitable size for exhaust fan of the following sweep

450 mm sweep

300 mm sweep

230 mm sweep

M&L for sub-main wiring with two runs of 1.5 sqmm unsheathed PVC insulated, single core heavy duty ISI Marked FRLS cable 1100 volts grade with multistranded copper conductor drawn through and including PVC casing caping fixed to wall/roof/floor and including suitable PVC conduit with 1.5 sqmm copper earth wire after taking out the existing sub-main wiring, making good to the distrubed surfaces also matching the existing surfaces all as specified and directed. Note: 2 runs of cable and one run earth wire and PVC casing caping will be measured as one length or one RM.

All same as per item No 139 here-in-before but size of cable 2.5 Sqmm

Supply and fix in repair switch socket combination 2 in 1, 5 Amp flush type with box including disconnecting, taking down old/ unserviceable switch socket combination 5 Amps complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair switch socket combination 3/5 pin 6/16 Amp, flush type with box including disconnecting, taking down old/unserviceable switch socket outlet combination 15 Amps complete all as specified and directed by Egnr-in-Charge.

Supply and fix in repair exhaust fan 300mm sweep, made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair exhaust fan 250mm sweep made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding complete all as specified and directed by Engr-in-Charge.

SRUSHTI CONSTRUCTIONS

Moulya Builders

JITHU CONSTRUCTION COMPANY

chowdeshwariconstructionco

ANAND REFRIGERATION

eurekaenterprises

SAPTHAGIRI CONSTRUCTIONS