Loading
Loading…
Loading…
Tender Value
₹6.9 L
EMD Value
₹13,700
Closing Date
19 Dec 2025, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
ELECT
15 conditions · 4 needing a document upload
Tenderers have to submit PAN and GST Registration.
Contractors have to submit a valid Electrical Contractor's License issued by the Government.
Tenderer should have to submit TENDER FORM (First Sheet - Annexure I) as per GCC'2022(Works).
Annexure-V/A to be submitted by each members of partnership Firm as per GCC'2022.
139 conditions · 44 needing a document upload
The following documents should be specified for submission along with tender:- a) List of Personnel, Organization available on hand and proposed to be engaged for the subject work. b) List of Plant & Machinery available on hand (own) and proposed to be inducted (own and hired to be given separately) for the subject work. c) List of works completed in the last three financial years giving description of work, organization for whom executed, approximate value of contract at the time of award, date of award and date of scheduled completion of work, Date of actual start, actual completion and final value of contract should also be given. d) List of works on hand indicating description of work, contract value approximate value of balance work yet to be done and date of award. e) Valid electrical contractor's license issued by the State Govt., f) Supervisory License issued by the state Govt. g) Name of the Engineer/ Diploma holder:- (i) One qualified Graduate Engineer when the cost of the work to be executed is rupees two hundered (200) lakhs and above & (ii) One qualified Diploma Holder (Engineer) when the cost of the work to be executed is more than rupees twenty five (25) lakhs, but less than rupees Two hunderd (200) lakhs.
b) HUF: (i)A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF.
(ii)An undertaking that the HUF is not blacklisted or debarred by Railways or any other Ministry / Department of Govt, of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which HUF was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
For Partnership firm submit details as per given below :-
Self/Notary attested copies of Partnership deed.
Special Power of Attorney as per proforma given in 'Annexure- XII' of Standard Tender Document to be submitted by Partnership firm. (Not required if one or more partners are authorized in Parternership deed to sign on behalf of the firm.)
An undertaking that the Partnership firm is not blacklisted or debarred by Railways or any other Ministry / Department of Govt, of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which he was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
For JV firm submit details as per given below :-
Memorandum of Understanding of JV as per proforma given in 'Annexure-XIV' of Standard Tender Document.
Letter of consent as per proforma given in 'Annexure-XV' of Standard Tender Document to be submitted by a partnership firm participating as a Member of JV firm (wherever applicable).
Notary Certified copy of resolution passed by Board of Directors of the Company,permitting the company to enter into a JV agreement, authorizing MD or one of the Directors of Mangers of the Company to sign JV Agreement, such other documents required to be signed on behalf of the Company and enter into liability against the company and/or do any other act on behalf of the company to be submitted as per 'Annexure-XVI' of Standard Tender Document.
Special Power of Attorney as per proforma given in 'Annexure- XVII' of Standard Tender Document to be submitted by Limited Companies or Sole Proprietor participating as member of JV firm (wherever applicable).
Registered Society & Registered Trust: The tenderer shall submit
(i) a copy of the Certificate of Registration
(ii) a copy of Deed of Formation
(iii) a copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust.
An undertaking that the Registered Society & Registered Trust is not blacklisted or debarred by Railways or any other Ministry / Department of Govt, of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which he was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
LLP (Limited Liability Partnership): If the tender is submitted on behalf of a LLP registered under LLP Act-2008, the tenderer shall submit along with the tender:
(i)A copy of LLP Agreement
(ii)A copy of Certificate of Incorporation
(iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP.
(iv)An undertaking that the LLP is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of JV in which the LLP was / is a member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
(e)Company registered under Companies Act 2013:
(i)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company
(ii)A copy of Certificate of Incorporation
(iii)A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company.
(iv)An undertaking that the Company is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which the Company was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Electrical work for : At APDJ Div- Electrical work for at Divisional Railway Hospital widening of OPD corridor, Pharmacy corridor, provision of 01 female toilet ,03 nos. stores and 02 doctor's chamber.
AP-EL-18-25-26~NFR
AP-EL-18-25-26
Open
Works - General
180 Days
Alipurduar, West Bengal
₹0
₹13,700
19 Dec 2025
26 Nov 2025
5 Dec 2025
27 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 6,86,077.09 | ||
| — | 60.00 | — | — | ||
| Supply & fixing of Inverter point is to be drawn by single core stranded FRLSH insulated 1.5 mm2, 1100 volt grade copper cable conforming to IS:694 through alkathene pipe /casing capping/rigid conduit of suitable size to be fixed inside wall by having final plastering with necessary coupler /elbow /Tee / 4way etc. The point to be terminated by modular type 6A flush type controlling switch on suitable size full/half flash GI board & platinum white plate at one end and by ceiling rose with 1sqmm single core IS : 694 multi-stranded FRLSH copper wire as earth continuity at the other end as per direction of Railway Engineer. Pre-inspection of materials by Railway Engineer should be imparted. Make - Cable- Finolex, Havells, KEI, Polycab C/Rose & Switch - Crabtree, LK, Legrand, Anchor | — | — | — | 15,746.4 | |
| — | 30.00 | — | — | ||
| Supply & fixing of BLDC bracket fan 400 mm sweep, input voltage 165-285, RPM 1500 is to be fixed in proper location as per direction of Railway Engineer. (3 years Guarantee certificate to be provided). Pre-inspection of materials by Railway Engineer should be imparted. Make - Philips, Crompton, Bajaj, Havells | — | — | — | 1,46,857.2 | |
| — | 6.00 | — | — | ||
| Supply & fixing of BLDC exhaust fan 250 mm sweep, including louver shutter input voltage 220-240, RPM 1300 is to be fixed in proper location as per direction of Railway Engineer. (3 years Guarantee certificate to be provided). Pre-inspection of materials by Railway Engineer should be imparted. Make - Philips, Crompton, Bajaj, Havells | — | — | — | 20,470.14 | |
| — | 6.00 | — | — | ||
| Supply & fixing of modular plug point 16A, 6 pin is same as item no.1, except the line shall be drawn by single core stranded FRLSH insulated 2.5sqmm, 1100 volt grade copper cable. 16A, 6 pin socket and 16A separate flush type modular switch to be fixed with platinum white plate on GI board as per direction of Railway Engineer. Pre-inspection of materials by Railway Engineer should be imparted. Make- P-Socket/ Modular Switch- Legrand, Crabtree, LK, Anchor | — | — | — | 1,773.3 | |
| — | 6.00 | — | — | ||
| Supply of pedestal fan 400 millimetre Length of Cord with 6 Amp Plug top ,Suitable nuts and bolts ,Clamp, Remote is to be handed over to Engineer in-charge. (3 years Guarantee certificate to be provided). Pre-inspection of materials by Railway Engineer should be imparted. Make -Orient, USHA ,Crompton, Havells | — | — | — | 28,800 | |
| — | 3.00 | — | — | ||
| Supply, installation, testing & commissioning of Inverter 5KVA/48V, (3 years Guarantee certificate to be provided), 1 phase output IGBT based pure sign wave with 12V,150AH x 4nos tubular gel valve regulated lead acid (VRLA) Exide batteries to provide 4 hrs backup along with metallic battery rack with Plastic/ PVC/ Rubber/ polyester coating so as to keep the rack from damage of battery acid. The work is including the total connection of system & fittings as per direction of Railway Engineer. (Specification is attached in Annexure- A) | — | — | — | 3,10,166.04 | |
| — | 40.00 | — | — | ||
| Supply & fixing of 8 SWG G.I. wire for earthing is to be laid as per direction of Railway Engineer. Pre-inspection of materials by Railway Engineer should be imparted. Make - GI wire : TATA, JINDAL, BANSAL | — | — | — | 1,639.2 | |
| — | 16.00 | — | — | ||
| Supply and erection of fencing panels at switching stations is to be done as per direction of Railway Engineer. Pre-inspection of materials by Railway Engineer should be imparted. | — | — | — | 76,634.56 | |
| — | 0.20 | — | — | ||
| Supply and erection of fencing uprights is to be done as per direction of Railway Engineer. Pre-inspection of materials by Railway Engineer should be imparted. | — | — | — | 26,815.55 | |
| — | 20.00 | — | — | ||
| Supply and erection of anticlimbing device for Switching stations is to be done as per direction of Railway Engineer. Pre-inspection of materials by Railway Engineer should be imparted. | — | — | — | 6,435.4 | |
| — | 0.10 | — | — | ||
| Supply of steel reinforcement for RCC work is to be done as per direction of Railway Engineer. Pre-inspection of materials by Railway Engineer should be imparted. | — | — | — | 8,642.91 | |
| — | 3.00 | — | — | ||
| Reinforced concrete for foundation and plinth in other than hard soil & rock (Grade M- 20) is to be done as per direction of Railway Engineer. Pre-inspection of materials by Railway Engineer should be imparted. | — | — | — | 26,842.89 | |
| — | 10.00 | — | — | ||
| Gravel spreading is to be done as per direction of Railway Engineer. Pre-inspection of materials by Railway Engineer should be imparted. | — | — | — | 15,253.5 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .