PROVN OF 02 X TOILET BLOCKS NEAR GYM HALL AT BHEEMA SPORTS COMPLEX, GUARD ROOM AT BDE MAGAZINE AND STORE ROOM FOR A VEH REPAIR SHOP AT 282 (I) FD WKSP COY AT BRICHGUNJ MIL STN, PORTBLAIR

Amount

Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and as directed

Excavation over areas n.exc 1.5m deep and getting out in any type of soil complete all as specified and as directed

Excavation in post holes (or similar holes) each not exceeding 0.5 cum getting out in Hard/dense soil returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm watering and removing surplus soil to a distance not exceeding 50m and making good surfaces complete all as specified and as directed.

Excavation in trenches n.exc 1.50m wide and n.exc 1.50m deep and getting out in any type of soil complete all as specified and as directed

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm excavated soil including making good of disturbed surfaces complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Removing excavated surplus soils material exc 50m and not exc 250 m depositing where directed at a level n exc. 1.5 m above the starting point all as specified and as directed

Material and labour for Coarse aggregate (Kankar or Laterite) grading 1, 90 to 40 mm size all as specified and as directed

Material & Labour for Moorum/Red Bajri Filling in floors or pavings, laid in layers n exc 15cm thick, spread, levelled and rammed including watering and complete all as specified and as directed

Material and labour for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface all as specified and as directed.

Material and labour for treating the bottom & sides of excavation @ the rate of 5 Lit of emulsion per sqm of surface area all as specified and as directed

Material and labour for Anti Termite Treatment on top of earth filling @ 5 lits/sqm of approved chemical complete all as specified and as directed

Taking down cement plaster any description incl racking out joints, hacking for key scrubbing down with water, etc complete all as specified and as directed

Dismantling Plain or corrugated steel sheeting any gauges thickness incl nanital or similar pattern roof coverings complete all as specified and as directed

Dismantling of wall and ceiling boards (fibre pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, incl cover fillets complete all as specified and as directed

Taking down of chowkhats or frames not exc 1.5 sqm each (with out taking off shutters from the frame) complete all as specified and as directed.

All as per item No 16 here in before but exc 1.5 n exc 4 sqm each.

Material and labour for cutting holes exc. half brick but not exc one brick in brick or concrete walls built in C:M or in cement lime mortar for inserting holdfasts & making good dismantled portion in CM (1:3) or PCC (1:2:4) Type B-1 as required complete all as specified and as directed

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed

Demolition of PCC in ground floor or paving n.exc 15 cm thick above or below ground level complete all as specified and as directed

Demolition of Precast concrete articles, and PCC block walling built in cement mortar complete all as specified and as directed

Material and labour for PCC 1:3:6 type C2 (using 40mm graded aggregate) as in bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested for CI pipe 150 mm bore complete all as specified and as directed.

Material and labour for extra for forming fair finished channel or drain 30cm ginth (inner ginth) in cement concrete using extra cement incl forms, moulds stopped complete all as specified and as directed

Material and labour for providing PCC 1:4:8 type D2 (using 40mm graded aggregate) as sub base 75mm thick complete all as specified and as directed

Material and labour for 75mm thick Cement concrete in (1:3:6) Type C1 using 20mm graded stone aggregate as in plinth protection and finished even and smooth without using extra cement complete all as specified and as directed

Material and labour 75mm thick PCC (1:2:4) Type B2 using 20mm graded stone aggregate as in flooring finished even and smooth using extra cement complete all as specified and as directed.

Material and labour 100 mm thick PCC 1:4:8 Type D2 using 40 mm graded stone aggregate as in sub bases complete all as specified and as directed.

Material and labour 100 mm thick PCC 1:3:6 Type C2 using 40 mm graded stone aggregate as in sub bases complete all as specified and as directed.

Material and labour Precast cement concrete hollow block masonry 1:2:4 type (using 16 mm graded stone aggregate) as in block masonry with Hollow bocks, 10cm Thick and set in cement mortar 1:6 compete all as specified and as directed.

Material and labour for pre-cast cement concrete solid block masonry with solid block using cement concrete 1:3:6 Type C1 (20mm graded stone aggregate) not exceeding 10cm in width, set in cement mortar 1:4 complete all as specified and as directed.

Material and labour Precast cement concrete 1:3:6 Type C1 (using 20mm graded stone aggregate) as in block masonry with solid bocks, exc 10cm width and set in cement mortar 1:6 compete all as specified and as directed.

Material and labour Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

Material and labour PCC in foundation filling and mass concrete Type C2 1:3:6 (40 mm graded aggregate) complete all as specified and as directed

Material and labour for PCC 1:2:4 Type B1 (using 20 mm graded stone of agg) as in coping surface channels, benchings etc of lmanholes finished fair and even complete all as specified and as directed.

Material and labour precast RCC 1:2:4 Type B1 (using 20 mm graded stone of agg) but in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cm 1:4 complete all as specified and as directed.

Material and labour for Reinforced cement concrete M30 (design mix) in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and as directed.

Material and labour for Reinforced cement concrete M30 (design mix) in columns, pillars, piers, posts and struts etc complete all as specified and as directed.

Material and labour for Reinforced cement concrete M30 (design mix) in Slab supported on walls, beams and columns in floors, roofs, landings, balconies canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Material and labour for Reinforced cement concrete M30 (design mix) in Chajjas, shelves complete all as specified and as directed.

Material and labour for Reinforced cement concrete M30 (design mix) in Beams, cantilevers, bressumers, lintels over 1.5m span, complete all as specified and as directed.

Use and waste of form work to edges of concrete flats, treads, breaks in floors, window cills,concrete railings, opeinings in concrete walls, floors and roofs n.exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and smimilar work all exceeeding 10cm wide and n.exc 20cm wide with rough finished surfaces complete all as specified and as directed.

Use and waste of form work to sides of rough finished concrete foundations, foootings, bases of columns, raft and raft beams, sides and soffits if any of foundation and plinth beams and similar work vertical or to batter complete all as specified and as directed by Engineer in Charge.

Use and waste of form work rough finished surfaces of square or rectangular pillars, posts, sruts, piers, columns and stanchions complete all as specified and as directed.

Use and waste of form work to sides and soffits of rough finished floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,etc alos splays between floors, and beams,etc complete all as specified and as directed.

Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick(Horizontal or sloping) complete all as specified and as directed.

Use and waste of form work to chullah hoods, chajjas,troughs and similar items including edges, etc complete all as specified and as directed.

Material and labour for TMT bars 10mm dia and over as in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and as directed.

Material and labour for TMT bars 6 to 8mm dia, cut to length bend to shape reqd incl cranking and lbinding with mild steel wire (annealed) complete all as specified and as directed.

Material and labour for TMT bars 5mm dia and over upto and incl 10mm dia in stirrups, spacers, and binders in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire complete all as specified and as directed.

Supply only water proofing compound Make - Scott No 1 conforming to IS-2645 1975.

Material and labour for rendering 10mm thick in CM 1:6 on internal surfaces of brick work or concrete surfaces of walls, finished even and smooth (without using extra cement) complete all as specified and as directed.

Material and labour for rendering 5 mm thick in CM 1:3 on for ceiling surfaces, finished even and smooth without using extra cement etc complete all as specified and as directed.

Material and labour for 15mm thick external rendering in two layers of 5mm thick in CM 1:4 mixed with water proofing compound (water proofing compound shall be used @3% weight of cement) over and including a coat of 10mm thick in CM (1:6) over brick or concrete surfaces finished even and fair. Note: Supply only WPC will be measured and paid separately

Material and labour 10mm thick rendering in cement plaster 1:4 on fair faces of brick or concrete surface, and finishing the surface even and smooth w/o using extra cement etc complete all as specified and as directed.

Material and labour for rendering 15 mm thick in one layer on concrete surface in cement mortar 1:4 mixed with WPC @ 3% by weight of cement finished fair and even without using extra cement complete all as specified and as directed.

Material and labour for 15 mm thick rendering in CM 1:4 on concrete surfaces finished fair and even complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed by Engineer-in-Charge.

Material and labour for applying three coats white wash on newly plastered surfaces of wall including preparation of surfaces by complete all as specified and as directed.

Material and labour for oil bound distempering two coats over a coat of alkali resistant priming paint including preparation of new plastered or unplastered surfaces of wall complete all as specified and as directed by Engineer - in -Charge.

All as per item No 59 here in before but on ceiling

Material and labour for oil bound distempering two coats including preparation of surfaces old decorated, plastered or unplastered surfaces of wall complete all as specified and as directed by Engineer - in -Charge.

Material and labour for applying two coats of cement base paint over a coat of primer on new plaster or untreated surfaces on walls incl preparation of wall surfaces all as specified

Material and labour for two coat of weather proof exterior acrylic emulsion paint with anti-fungal property over a coat of primer and a coat of external wall putty on newly plastered wall surfaces including preparation of surfaces etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour applying two coats of weather proof acrylic emulsion paint exterior quality over a coat of primer (with antifungal properties) on external wall surfaces including preparation of old plastered surface etc, complete all as specified and as directed by Engineer - in -Charge.

Material and labour for Preparation of new steel/iron Surfaces of any description, over 10cm in width or girth, and applying two coat of synthetic enamel paint over one coat of red oxide primer, etc completed all as specified and as directed

Supply and fix Rolled mild steel joist, channel, angle or tee sections/Hollow square/rect sec, fixed independently, without connecting plates, etc. (Cut to ordinary lengths i,e. within 20mm of the length indicated) GDE Fe 410-0W (gde E-250) quality A.

Material and labour for Plates (Plain or Chequered) channels, square or notched (Ordinary and counter sunk) forming holes, without any attachment of Fe 290 (Gde E-165) completely all as specified and as directed by Engineer in Charge.

Supply and fix Plates plain channels, Square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe- 410-W(Gde E-250) quality B all as specified and as directed.

Supply and fix MS Flat iron wind ties for roof including securing bolts, rung, handles to manholes, etc. cutting tops at shape as directed, drilling holes, notching for wire etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Supply and fix MS steel work in tubular / post/ trusses/ purlin including special shaped washers base and bed plate cleat nut and bolt etc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 complete all as specified and as directed.

Supply and fix Mild steel bolts exc 12mm n' exc 20mm dia, purpose made, with hexagonal or square head one end and screwed the other, or screw both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long complete all as specified and as directed.

Supply and fix 0.71 Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and as directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws as specified etc complete all as specified and as directed.

Supply and fix Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for false ceiling with aluminium grid work (size of grid 605x605mm) with 35x25x1.5mm main tee and 25x25x1.4mm, cross tee and wall angle and suspended with 3.15mm dia, GI wire, hooked to roof with needful adjustment bolts at an interval of 1.20m, centre to centre staggered and board with Eco board, decorative type, size 600x600x4mm thick, finished with two coats of oil bound distemper over a coat of primer on exposed surfaces, complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Chequrred cement concrete tiles with grey cement and pigment of size 300 x 300 x 25 mm, set jointed and pointed in neat cement slurry over 15mm thick screed in CM (1:6) complete all as specified and as directed.

Material and labour for 20-25mm thick Machine cut kota stone slab flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, including cement screed bed 20mm thick 1:6 complete all as specified and as directed.

As per Item No:77 here in before but in kota stone skirting with and including of 10mm thick Backing coat in cement mortar of 1:4

Material and labour for 7 to 8 mm thick Non skid glazed ceramic tiles(Joint free) , area of each tile exc 0.18 sqm but n exc 0.38 Sqm in floors laid over 20mm thick screed bed cement mortar 1:6 set and jointed in cement slurry and pointed with coloured or white cement to match with exisiting surface complete all as specified and as directed.

Material and labour for coloured non skid ceramic tiles (Joint Free)7 to 8mm thick (square/rectangular) area of each tile exc 0.11 sqm n.exc 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles over and including screed bed or bedding layer of mortar 20mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed.

Material and labour non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm and not exceeding 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over 20mm thick screed bed in CM 1:6 complete all as specified and as directed.

Material and labour for glazed coloured ceramic tiles of size (450 x 300) x 7-8mm thick, on verticle surfaces such as skirting dados and risers to steps etc, including 10mm thick rendering in cement plaster 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed by Engineer-in-Charge

Material and labour for Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with gray cement slurry and pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including backing coat 10mm thick CM (1:3) complete all as specified and as directed.

Supply and fix 2nd class Hard wood 15mm thick plain both side as in eaves board etc. complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed by Engineer-in-Charge.

Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Aluminium anodised (minimum anodisation is 15 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, complete all as specified and as directed by Engineer-in-charge.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections handles and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

Supply and fix Aluminium powdercoated (minimum thickness of coating is 50 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, complete all as specified and as directed by Engineer-in-charge.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections handles and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

Supply only aluminium anodised grill (minimum anodisation 15 micron) with grill size 75 to 100mm, minimumthickness of 5.2 mm and minimum weight 2.4 kg/sqm or as per manufacturing specification, design and pattern as approved by GE suitable for aluminium frame for doors / windows/ ventilators complete all as specified and as directed.

Supply only 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.

Supply and fix 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.

Material and labour 12 mm thick pre-laminated particle board, exterior grade, pre-laminated on one side with decorative choice lamination and other side white lamination fixed to Aluminium frame etc complete all as specified and as directed.

Supply only 12 mm thick pre-laminated particle board, exterior grade, pre-laminated on one side with decorative choice lamination and other side white lamination fixed to Aluminium frame etc complete all as specified and as directed.

Supply ony 4 mm thick sheet figured glass and glazing with rubber packing around the glass, in squares exceeding 0.50 sqm in each pane complete all as specified and as directed.

Supply only aluminium anodised fly proof mesh 0.45 mm nominal dia of wire and average width of aperture 1.4mm and fixed with aluminium straps complete all as specified and as directed.

Supply & fix in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and as directed.

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and as directed.

Supply and fix floor door stoper of length 140mm of Aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Supply and fix 150mm long extruded, aluminium alloy, anodised, handles, fabricated type, complete all as specified and as directed by Engr-in-Charge.

Supply and fix Butt hinges,Size of hinge 100MM extruded brass, with mild steel hinge pin, bright polished and fixed, Type B-21 complete all as specified and as directed.

Supply and fix Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips to sheet cast or extruded sections and fixing bolt or cast aluminium alloy complete all as specified and as directed.

Supply and fix Door closer hydraulically regulated, aluminium extrected sec body designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60kg and fixed complete all as specified and as directed.

Supply and fix stop valves 15 mm chromium plated fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedStop valve CP 15mm complete all as specified and as directed.

Material and labour for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

Supply and fix brass chromium plated tubular towel rail 20 mm dia, D type 60 cm long between flangesTowel rail brass chromium plated 60 cm complete all as specified and as directed.

Supply and fix glass corner shelf, 30cm, with suitable D brackets complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 25 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, complete all as specified and as directed

Supply and fix in 100mm dia cast sanitary connection- short connections pipe of length upto 300mm complete all as specified and as directed by Engr-in-Charge.

Supply and fix brass chromium plated bottle traps 32 mm bor of trap for wash hand basin with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed.

Supply and fix PVC cabinet mirror of size 450 mm x 600 mm and fixed to wooden plugs with CP brass screws & cup washers, complete all as specified and as directed by Engineer-in-Charge.Make Prayag or equivalent

Supply and fix brass chromium plated toilet paper holder recessed type, complete all as specified and as directed by Engineer-in-Charge.

Supply only 10 ltrs PVC syphonic action type flushing cistern, low level, white, with inlet ball valve float and handle including brackets complete all as specified and as directed.

Supply and fix Angular Stop Cock with Wall Flange brass CP 15mm dia bore with cupand washer complete all as specified and as directed by Engineer-in-Charge. Make: Jaquar cat Part No.CON-059KN complete all as specified and as directed.

Supply and fix long body bib cock with wall flange cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed by Engineer-in-Charge. Jaquar cat Part No.CON-107KN complete all as specified and as directed.

Supply and fix hand shower (Health Faucet) 1 meter, with PVC tube with wall hook complete all as specified and as directed by Enineer-in-Charge

Supply and fix Soap Dispenser with Glass bottle complete all as specified and as directed by Engineer-in-Charge. Jaquar cat Part No.AKP-35735P or equivalent

Supply and fix two way bib cock with wall flange, brass CP complete all as specified and as directed by Engineer-in-Charge. Jaquar cat Part No.LYR-38041 or equivalent

Supply and fix pillar cock with extended lever handle15mm bore with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed by Engineer-in-Charge. Jaquar cat Part No.FLR-5031N or equivalent

Supply and fix vitreous china wash basin wite flat back size 550 x 400 mm including 15 mm dia facy type pillar tap chromium plated CP waste coupling, chain and plug, waste fitting, union and waste pipe 32 mm dia of required lengthand all necessary 450 mm long outlet and inlet PVC connectns pipe with PTMT check nuts complete all as specified and as directed.

Supply and fix vitreous China wash hand basin, 'OVAL TYPE' 545x 545x185 mm including with single tap hole fixed in granite including chromium plated CP waste coupling, chain and plug, waste fitting, union and waste pipe 32 mm dia of required length and all necessary 450 mm long outlet and inlet PVC connectns pipe with PTMT check nuts complete all as specified and as directed. Make: Jaquar cat Part No. FSS-WHT-29601

Supply and fix vitreous china half stall urinal complete including prividing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around back in cement discharge pipe etc complete all as specified and as directed by Engr- In -Charge.

Supply and fix rectangular shaped urinal partition made of frosted glass of size 900x 450x 10mm tk finish: chrome fixed to wall complete all as specified and as directed by Engr- In -Charge. Make: Jaquar model No. 1810-US/1810-UC

Supply and fix in vitreous china squatting pan orissa pattern of size 580x440mm white with integral foot rest and including 10 Ltr capacity low level flushing systern with flexible pipe and necessary necessary Pvc connections 15mm size with PTMT nuts of length 450mm complete.

Supply and fix vitreous china EWC model CASCADE type of size 640 x 360 x 690 mm in approved colour all as specified and as directed as per ISI mark.Make : Jaguar cat Part No. SLS-WHT-6851P or equivalent.

Supply and fix chromium plated, Brass towel rack with single rail as per Cat No. 1581 of Jaquar or equivalent, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Hand Dryer - Speed flow Material AISI 304 Stainless steel finish stain complete all as specified and as directed by Engineer-in-Charge. Jaquar cat Part No.HDR-SAP-M06ACS or equivalent

Material and labour for 15 mm bore uPVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors etc any type of pipe all as specified and as directed.

Material and labour for 20 mm bore uPVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors etc any type of pipe all as specified and as directed.

Supply and laying of CPVC pipes of outer dia 16mm SDR 11 and plain CPVC SDR 11 with all fittings complete all as specified

Supply and laying of CPVC pipes of outer dia 20 mm SDR 11 and plain CPVC SDR 11 with all fittings complete all as specified

Supply and fix 25 mm bore GI tubing medium grade laid in trenches / floor or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out complete all as specified and as directed

Material and labour for 75mm inner dia CI pipe (sand cast) in any length with (or) without ear with cement joint fixed to wall as vent pipe complete all as specified and as directed.

Material and labour for 150mm dia CI pipe (sand cast) in any length with (or) without ear laid in trenches and jointed in CM 1:1 complete all as specified and as directed.

Supply and fix 110mm bore of PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Supply and fix repairs PVC connection 15mm size with CP brass Nuts of legnth 450mm complete all as specified and as directed by Engineer-in-Charge

Supply and fix PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

Supply and fix 110 mm bore PVC (SWR) bend any radius complete all as specified and as directed.

Supply and fix 75 mm bore PVC (SWR) bend any radius complete all as specified and as directed.

Supply and fix for PVC (SWR) vent cowl, bore of pipe in 75 mm, etc complete all as specified and as directed.

Material and labour for 75mm inner dia CI cowls fixed to vent pipe complete all as specified and as directed.

Supply and fix in repairs stainless steel gratings 125 mm dia, complete all as specified and as directed by Engineer-in-Charge

Supply and fix PVC (SWR) 75mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

Supply and fix CI bend 75mm dia door access branch piece, 75mm dia, double, (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified and as directed by Engr-in-Charge.

Supply and fix 25 mm bore Gun Metal gate valve with iron wheel head ISI Marked screwed both ends suitable for GI tubing complete all as specified and as directed

Supply and fix CI bend 100mm dia with door access branch piece, 100mm dia, double, (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches Tee Junction with oval access hooks, complete all as specified and as directed by Engr-in-Charge.

Material and labour for cutting existing 50mm GI line and making branch connection of 40 mm dia GI line complete all as specified and as directed.

Supply and fix Rotational moulded three layer polyethylene water storage tanks of capacity 500 Ltr (cylindrical vertical with closed top) with 20mm dia float valve , hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

Supply and fix rotational moulded three layer polyethylene water storage tanks 1000 ltrs capacity (cylindrical or vertical with closed top) with 20mm dia float valve hoisted and fixed in position, complete all as specified and as directed by Engineer-in-Charge

Material and labour for point wiring with 1.5 sqmm (nominal area) FRLS PVC insulated stranded copper conductor single core including non metalic PVC conduit medium grade of appropriate size concealed in wall, pressed steel concealed terminal boxes of required size and with top cover 3 mm thick of plastic laminated sheet of reqd colour, painting terminal boxes inside and out side with one coat red oxide primer complete with all accessories and all as specified including 1.5 Sqmm FRLS PVC insulated unsheathed multistranded copper earth conductor to common earth and connected to earth dolly for light /bell point controlled by one switch. Note:- 1. Cost of PVC conduit, steel terminal boxes, plastic laminated sheet cover etc; are deemed to be included in the quoted rate.

All as per item No 150 here in before but One fan point controlled by one switch and one regulator

All as per item No 150 here in before but for 3 pin 5 Amps switch socket combination on independent board.

All as per item No 150 here in before but One three pin 5 Amp switch socket cum on same board

All as per item No 150 here in before but for 3 pin 15 Amps switch socket combination on independent board with 4 sq mm copper cable and 4 sq mm FRLS PVC insulated stranded copper conductor cable for earth continuity conductor connected to common earth dolly connecting upto fittings

Supply and fix ceiling rose surface baklite 65 x 50 mm 3 terminal, complete all as specfified and as directed by Engineer-in-Charge

Supply and fixing of switch piano flush type single pole one way 5 Amp complete all as specified and as directed.

Supply and fix switch socket outlet 3 & 2 pin (mult pin) 5 amps flush/box type, complete all as specified and as dircted by Engineer-in-Charge

Supply and fix fan speed regulator, electronic suitable for single phase AC, 240 volts, 50 Hz,100 watts, complete all as specified and as directed by Engineer-in-Charge Make:-Anchor/Havells/Bajaj

Supply and fix switch socket outlet multipurpose 3 pin 15 and 5 amp controlled by one switch, flush type complete all as specified and as directed.

Supply and fix MCB single pole, 240 volts, 5 to 32 Amps, complete all as specified and as directed.

Supply and fix MCB SPN, 240 volts,10kA, 5 to 32 Amps, complete all as specified and as directed.

Supply and fix in repair metal enclosure distribution board SPN, 8 way 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs, including taking down old MCB/DB,Make : Havells /Legrand/C&S/L&T complete all as as specified and as directed.

Supply and fix sheet metal enclosure distribution board SPN, 4ways 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs all as specified and as directed complete all as specified and as directed.

Supply and fix ceiling fan suitable for working on AC 230 volts, 50 Hz,1200 mm sweep 5 star rating with down rod and canopy colour of milky white including suitable fan hook anchor flashner for fixing of fan on ceiling complete all as specified and as directed. Make:Havells or equivalent Crompton/Usha

Supply and fix ventilating fan Celso suitable for on working of AC 230 V ,50 Hz 200 mm sweep ,incl louvers complete all as specified Make:Havells HSN code 8414/Crompton/Orient

Supply and fix exhaust fan suitable for on working of AC 230 V ,50 Hz 380 mm sweep 1400 RPM,with heavy duty motor ,incl louvers complete all as specified Make:Havells/Crompton/Orient

Supply and fixing energy efficient LED Smart bright batten 22 watt fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as directed. Make : Philips Cat No BN021C LED20S PSU CDL/NW GR or eqvt in make of Bajaj/Wipro.

Supply and fixing energy efficient LED Smart bright batten 10 watt fitting 2ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 25000 hours including lamp and connecting with twin core sheathed cable from fitting to ceiling rose all as specified and as directed. Make : Philips Cat No BN021C LED10S -6500 PSU GR S1 or eqvt in make of Bajaj/Wipro/Crompton.

Supply and fixing energy efficient LED Smart bright batten 22 watt fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core sheathed cable from fitting to ceiling rose all as specified and as directed. incl taking down old unsv light fitting. Make : Philips Cat No BN021 LED 25S 4000 PSU GR S1 or eqvt in make of Bajaj/Wipro/Crompton.

Supply and fix New generation energy saving & environmental friendly long life versatile pressure dia cast aluminium IP65 road way luminaire with high power 25 w LEDs as light and electronic driver complete with necessary brackets (made out of 25 mm bore GI light grade pipe approx. 0.6 M long) nuts, bolts etc to be fixed as on walls complete as directed. Make: Philips Cat No BRPO20 LED HP/CW 240 V 25 w or equivalent model of Wipro / Havells

Supply, lay, test and commissioning underground XLPE insulated and PVC sheathed, armoured heavy duty underground cable, suitable for earthed system, laying in trenches/duct sleeving through pipe in duct, ISI marked with aluminium stranded conductor 1100 volt grade of cross section area 2 Core 6 sq mm complete all as specified and as directed.

Supply, lay, test and commissioning underground XLPE insulated and PVC sheathed, armoured heavy duty underground cable, suitable for earthed system, laying in trenches/duct sleeving through pipe in duct, ISI marked with aluminium stranded conductor 1100 volt grade of cross section area 2 core 10 sq mm complete all as specified and as directed.

Supply & lay cable protection pipe of HDPE double wall corrugated (DWC) incl couplers, bends etc of size 50 mm OD and 38mm ID confirming to IS 14930 -II and ISI Marked all specified and as directed.

Material and labour for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and as directed electrical plate No. 3 of SSR part - I complete all as specified and as directed.

T.THIYAGARAJAN

RADHA GOVIND CONSTRUCTION

Chandra Construction Enterprises

AMR TRADERS

M/s Kamal Electrical