Shifting of HT, LT and S/S from Hatamunigda to Garadi and Burjuguda to Hatamuniguda Jn due to widening and strengthening of K-M-T road (SH -5) (from 30/00 Km to 45/615 Km) during 2025-26

WPB 160x152mm (30.44kg/mtr),11mtr with base plate 300x300x12mm

33kV F clamp 2.9kg each(Pole top bracket)

11KV V Cross Arm(22kg each)GI

GI Back Clamp for "V"Cross Arm

33KV DISC(B&S) 90KN Insulator Polymer

33KV H/W Fitting (B&S) type

33KV Pin Insulator 320CD Polymer

100x50x6mm GI channel for straight cross arm 1.8mtr each & 0.2mtr long -including top piece(cut point pole-4nos)

Fish plate (0.661kg/item)=0.661xRs.106.5=Rs.70.4

H.T.Stay set(Complete)

7/8 SWG G.I.Stay wire

33KV Stay Insulator

HT Stay clamp (1.9Kg/Pair) for stud @2/pole

Earthing device Coil type (GI)

8SWG GI wire for earthing

100mm2 AAAC

PG clamp for 100mm2 AAAC (cut point)

G.I.Bolts,Nuts&Washers

Anticlimbing Device (GI barbed wire 3kg per support)

Back clamp for Barbed wire anticlimbing device 25x3mm flat

Danger board

Back clamp for Danger board 25x3mm flat, 0.59kg/mtr

75x40x6mm channel st cross arm 1.5mtr @ 6.8kg/mtr (with galvanisation) for road cross Guarding

No.6 GI wire for road cross guarding 1no.

40mm dia nominal bore pipe (medium gauge) earthing device with 3mtr long

No. 25x6mm GI flat for earthing

No.6 GI wire for earthing.

Eye Hook

Sundries (painting,danger board, clamp, connectors, anticlimbing device, blinding tape etc.)

WPB 160x152mm (30.44kg/mtr),11mtr with base plate 300x300x12mm

Top Pressure chennel 100x50x6mm ,2.8mtr long 2 Nos. (9.2kg/mtr) with galvanisation)

Bracing channel 75x40x6mm GI 2.8mtr long 2nos. (6.8Kg/mtr)

Bracing Angle 50x50x6mm GI 4mtr long 2nos. (6.8Kg/mtr)

33KV DISC(B&S) 90KN Insulator Polymer

33KV H/W Fitting (B&S) type

33KV Pin Insulator type polymer

PG clamp for 100mm2 AAAC (cut point)

Fish plate 50x8mm (0.661kg/item)=0.661xRs.106.5=Rs.70.4

AB switch mounting channel 75x40x6mm ,4.3mtr long 8 Nos. (7.14kg/mtr) with galvanisation)

AB Switch side support GI channel (100x50x6)mm 9.56kg/mtr ,each channl length 0.35Mtr 2nos. Channel required/AB switch

GI channel for support for down pipe 75x40x4.8mm 7.14kg/mtr , each channel length 0.8mtr 1no channel required/AB switch

33KV Lightening Arrestor 30KV ,10KA station class-2

33Kv AB Switch 3Pole ,400A

Earthing device Coil type (GI)

No-8 GI wire (Dia-4.6mm) 0.131Kg/Mtr -2Mtr for connecting pole with coil earthing

Danger board

Back clamp for Danger board 25x3mm flat, 0.59kg/mtr

Anticlimbing Device (GI barbed wire 3kg per support)

Back clamp for Barbed wire anticlimbing device 25x3mm flat

No. 50x6mm GI flat for earthing

GI Nuts ,bolts, and washers

75x40x6mm GI channel st cross arm 1.5mtr @ 6.8kg/mtr (with galvanisation) for road cross Guarding

No.6 GI wire for33KV road cross guarding 1no.

40mm dia nominal bore pipe (medium gauge) earthing device with 3mtr long

No-6 GI wire (Dia-4.6mm) 0.131Kg/Mtr -2Mtr for connecting pole with coil earthing

Eye Hook for guarding

Sundries (painting,danger board, clamp, connectors, anticlimbing device, blinding tape etc.)

Stay Concrete material in ratio 1:2:4 as per TPSODL specification and drawing =0.2Cum @6648.85

Concreting of 11mtr poles in ratio 1:1.5:3=0.45Cum @6648.86

Couping of poles in ratio 1:1.5:3=0.1125Cum @6648.85

Materials for masonary works for earth pit,charcoal, salt etc including construction of earthing chamber (size 2"x2") and RCC slab cover

Dismantelling of 11/13mtr Joist/WPB poles after digging the pit and taking out pole , transportation and stacking the pole aat safr=er posituion within 10km / site store and refilling the pit with loose earth and ramming

Dismantalling of ACSR/AAAC from overheas lines ,recoiling, loading, transportation, uloasding and stacking at proper place

Electrical Inspection fee

WPB 160x152mm (30.44kg/mtr),11mtr

9mtr long 300KG PSC pole

11kV F clamp 2.9kg each(Pole top bracket)

11KV V Cross Arm(10.2kg each)

GI Back Clamp for "V"Cross Arm

11KV DISC(B&S) 70KN Insulator Polymer

11KV H/W Fitting (B&S) type

11KV Pin Insulator Polymer

100x50x6mm GI channel for straight cross arm 1.2mtr each & 0.2mtr long -including top piece

Fish plate (0.661kg/item)=0.661xRs.106.5=Rs.70.4

H.T.Stay set(Complete)

7/10 SWG G.I.Stay wire

11KV Stay Insulator

HT Stay clamp (1.9Kg/Pair) for stud @2/pole

Earthing device Coil type (GI)

No-8 GI wire (Dia-4.6mm) 0.131Kg/Mtr -2Mtr for connecting pole with coil earthing

RCC base plate (500mmx500mmx10mm) for PSC pole

80mm2 AAAC

PG clamp for 80mm2 AAAC (cut point)

G.I.Bolts,Nuts&Washers

Anticlimbing Device (GI barbed wire 3kg per support)

Back clamp for Barbed wire anticlimbing device 25x3mm flat

Danger board

Back clamp for Danger board 25x3mm flat, 0.59kg/mtr

75x40x6mm GI channel st cross arm 1.5mtr @ 6.8kg/mtr (with galvanisation) for road cross Guarding

No.6/8 GI wire for road cross guarding 1no.

40mm dia nominal bore pipe (medium gauge) earthing device with 3mtr long

No-6 GI wire (Dia-4.6mm) 0.131Kg/Mtr -2Mtr for connecting pole with coil earthing

Eye Hook for guarding

No. 25x6mm GI flat for earthing

Sundries (painting,danger board, clamp, connectors, anticlimbing device, blinding tape etc.)

9mtr long 300KG PSC pole

Pressure chennel 100x50x6mm ,2.8mtr long 2 Nos. (9.2kg/mtr) with galvanisation)

Transformer mounting channel 100x50x6mm ,2.8mtr long 2 Nos. (9.2kg/mtr) with galvanisation)

AB switch mounting channel 75x40x6mm ,2.8mtr long 4 Nos. (6.8kg/mtr) with galvanisation)

HG fuse mounting channel 75x40x6mm ,2.8mtr long 4 Nos. (6.8kg/mtr) with galvanisation)

Cantilever channel for supporting HG fuse 75x40x6mm MS Angle 1mtr long 2nos. (6.8Kg/mtr)with Galvanisation

Cantilever channel for supporting AB switch 50x50x6mm MS Angle 1mtr long 2nos. (6.8Kg/mtr)with Galvanisation

Angle mounting for LT Distribution Box 50x50x6mm MS Angle 3mtr long 2nos. (4.5Kg/mtr)with Galvanisation

AB Switch side support GI channel (100x50x6)mm 9.2kg/mtr ,each channl length 0.35Mtr 2nos. Channel required

GI channel for support for down pipe 75x40x6mm 9.2kg/mtr , each channel length 0.8mtr 1no channel required

Transformer belting 50x50x6mm MS Angle 2.8mtr long 2nos. (4.5Kg/mtr) with side angle total (7mtr)with Galvanisation

11Kv AB Switch 3Pole ,200A

11Kv HG fuse 3Pole ,200A

11KV Lightening Arrestor 9KV ,10KA

11KV Disc Insulator (T&C) 45KN ,polymer

11KV H/W fittings (T&C) 45KN ,polymer

HT stay set complete REC standard

7/10 GI stay wire (Grade-2)

HT stay Insulator Type-C

Stay clamp(1.9Kg/pair)

GI pipe earthing 40mm dia medium gauge 3mtr long earth device

GI Flat(25x6)mm

LT distribution box with MCCB , Al. busbar of single bay with Kitkat fuse for 25KVA DSS

G.I.Bolts,Nuts&Washers

55sqmm AAA conductor for jumpering

1x70sqmm ,1core LT pVC cable Unarmoured DTR to LTDB

RCC base plate (500mmx500mmx10mm) for PSC pole

Earthing for supports (Coil type)

No-8 GI wire (Dia-4.mm) 0.131Kg/Mtr -2Mtr for connecting pole with coil earthing

Danger board

Back clamp for Danger board 25x3mm flat, 0.59kg/mtr

Anticlimbing Device (GI barbed wire 3kg per support)

Back clamp for Barbed wire anticlimbing device 25x3mm flat

Sundries (painting,danger board, clamp, connectors, anticlimbing device, blinding tape etc.)

WPB 160x152mm (30.44kg/mtr),11mtr with base plate 300x300x12mm

RCC base plate (500mmx500mmx10mm) for PSC pole

Pressure chennel 100x50x6mm ,2.8mtr long 2 Nos. (9.2kg/mtr) with galvanisation)

Bracing channel 75x40x6mm GI 2.8mtr long 2nos. (6.8Kg/mtr)

Bracing Angle 50x50x6mm GI 4mtr long 2nos. (6.8Kg/mtr)

11KV DISC(B&S) 70KN Insulator Polymer

11KV H/W Fitting (B&S) type

11KV Pin Insulator type polymer

PG clamp for 80mm2 AAAC (cut point)

Fish plate (0.661kg/item)=0.661xRs.106.5=Rs.70.4

H.T.Stay set(Complete)

11KV Stay Insulator

HT Stay clamp (1.9Kg/Pair) for stud @2/pole

7/10 SWG G.I.Stay wire

Earthing device Coil type (GI)

No-8 GI wire (Dia-4.6mm) 0.131Kg/Mtr -2Mtr for connecting pole with coil earthing

Danger board

Back clamp for Danger board 25x3mm flat, 0.59kg/mtr

Anticlimbing Device (GI barbed wire 3kg per support)

Back clamp for Barbed wire anticlimbing device 25x3mm flat

GI Nuts ,bolts, and washers

75x40x6mm GI channel st cross arm 1.5mtr @ 6.8kg/mtr (with galvanisation) for road cross Guarding

No.6/8 GI wire for road cross guarding 1no.

40mm dia nominal bore pipe (medium gauge) earthing device with 3mtr long

No. 25x6mm GI flat for earthing

No-6 GI wire (Dia-4.6mm) 0.131Kg/Mtr -2Mtr for connecting pole with coil earthing

Eye Hook for guarding

Sundries (painting,danger board, clamp, connectors, anticlimbing device, blinding tape etc.)

8mtr long 200KG PSC pole

9mtr long 300KG PSC pole

Pole clamp with I hook

Dead End clamp

I hooh for Dead End clamp

GI Nuts ,bolts, and washers

LT Stay set Complete

LT Stay Insulator

LT Stay Clamp (1.4Kg/pair)

7/12SWG G.I.stay wire

RCC base plate (500mmx500mmx10mm) for PSC pole

Earthing device Coil typr(GI)

No-8 GI wire (Dia-4.6mm) 0.131Kg/Mtr -2Mtr for connecting pole with coil earthing

Anticlimbing Device (GI barbed wire 3kg per support)

Back clamp for Barbed wire anticlimbing device 25x3mm flat

Danger board

Back clamp for Danger board 25x3mm flat, 0.59kg/mtr

Sundries (painting,danger board, clamp, connectors, anticlimbing device, blinding tape etc.)

Stay Concrete material in ratio 1:2:4 as per TPSODL specification and drawing =0.2Cum @6648.85

Concreting of 8mtr poles in ratio 1:1.5:3=0.375Cum @6648.85

Concreting of 9mtr poles in ratio 1:1.5:3=0.375Cum @6648.86

Concreting of 11mtr poles in ratio 1:1.5:3=0.45Cum @6648.86

Couping of poles in ratio 1:1.5:3=0.1125Cum @6648.85

Materials for masonary works for earth pit,charcoal, salt etc including construction of earthing chamber (size 2"x2") and RCC slab cover

Dismantelling of 8/9mtr PSc poles after digging the pit and taking out pole , transportation and stacking the pole aat safr=er posituion within 10km / site store and refilling the pit with loose earth and ramming

Dismantalling of ACSR/AAAC from overheas lines ,recoiling, loading, transportation, uloasding and stacking at proper place

Dismantalling of , steel structure (Anglr/channel/flats/nuts/bolts)from overheas lines ,recoiling, loading, transportation, uloasding and stacking at proper place

Dismantelling of 25KVA Transformer loading, transportation, uloasding and stacking at proper place

Electrical Inspection fee

Please Enable Macros to View BoQ information