PROVISION OF GEYSERS AND CONNECTED ACCESSORIES AND CERTAIN OTHER MINOR AND REVENUE WORKS AT AF STN BIHTA

Amount

Taking down of chowkat with shutter without taking off shutters from the frame exceeding 1.5 sqm each but not exceeding 4 sqm all as specified and as directed.

Taking down of chowkat with shutter without taking off shutters from the frame n. exceeding 1.50 Sqm all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the permises.

M&L for coloured Non-skid ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding laid in cement mortor 1:6 complete all as specified and directed.

M&L for coloured Glazed ceramic tiles in vertical surfaces 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match and fix over rendering10 mm thick in cement mortar 1:4 on other than fair faces of brick wall complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 18-20 mm thick over 20 mm thick cement screed bed in CM 1:6, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beeswax polish complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc.

M&L for 10 mm thick rendering in CM (1:6) on vertical surfaces of brick walls finished even and smooth without using extra cement complete all as specified and directed.

S&F anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. aluminium section weighing should not be less than 1.25 kg/m. complete all as specified and directed. (Note : Minimum thickness of powder coating 50 micron).

S&F anodised aluminium powder coated window and ventilator shutters, hung type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. anodised aluminium fittings such as peg stays 150 mm long (01 No), hinges B-21 100 mm long (02 No), suitable handle (01 No) complete all as specified and directed.

S&F sheet glass 4 mm thick ordinary quality & glazing with rubber gasket in square n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F anodised aluminium powder coated (minimum thickness of powder coating is 50 micron) door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed by Engr-In-Charge.

M&L for 12 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws complete all as specified and directed.

S&F sheet glass 5.50 mm thick ordinary quality & glazing with rubber gasket in square exc 0.5 Sqm in each pane complete all as specified and directed.

S&F aluminium (extruded section) for door closer hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kgs complete all as specified and directed.

S&F 200 mm long aluminium, anodised, barrel tower bolts of extruded section in door shutters only complete all as specified and directed.

S&F mortice lock, vertical type size 100 mm brass 4 livers fixed in door complete all as specified and directed.

M&L for granite (of any type) tiles 16-18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite shade of granite stone including grinding and polishing complete all as specified and directed.

Taking down or up 15 mm bore galvanised iron tubing and connection including cleaning for refixing or removal all as specified.

S&F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed.

S&F in repair 15 mm bore chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F of stainless steel sink made out of 1.00 mm thick sheet for kitchen or laboratory with plug, washers, waste pipe, including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets, connecting union of 495mm x 420mm bowl Size 410 mm x 330 mm x 160 mm complete all as specified and directed.

Dismantling existing cast iron /PVC (SWR) soil vent pipe of 75 mm internal dia, fixed to wall or laid in trenches incl all fitting & accessories.

S&F PVC (SWR) soil waste and vent pipes 75 mm bore in any length, single socketed with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap with chromium plated grating of 75 mm size including jointing to waste pipe with cement joints etc complete all as specified and directed.

M&L RCC (Nominal mix) type B1, 1:2:4 (20mm graded aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L new plastered surfaces of wall and applying two coats oil bound distemper over a coat of alkali resistant primer over a coat of chalk whiting (wall care putty) on plastered surface complete all as specified and as directed.

M&L for complete removal of existing treatment of wall and applying two coats oil bound distemper over a coat of alkali resistant primer over a coat of chalk whiting (wall care putty) complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with SS wire staples complete all as specified and directed.

S&F mild steel framed work such as grills, grating, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders: framed balusters, wall ways, railings, frame work of water tanks and similar work confirming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for two coat of synthetic enamal (ordinary tint) new surfaces of any description of steel, over 10 cm in width or girth over a coat of red oxide not otherwise described complete all as specified and directed.

Surface dressing n.exc 15 cm deep in soft/loose soil and clearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots, and removing rubbish up to a distance of 50 metre outside the periphery of the area under clearance, complete all as specified and directed.

M&L 75 mm thick cement concrete type D-2 1:4:8 (40mm graded aggregate) as in subbase of floors etc. complete all as specified and directed.

M&L coloured/grey chequered cement concrete tiles 25cm x 25cm x25cm thick set, jointed and pointed in neat cement slurry in floors (glossy finish/rubber moulded) over screed bed 20mm thick in CM 1:6, complete all as specified and directed.

M&L 60mm thick, Machine pressed precast concrete interlocking paver block any shape and size made with grey cement and pigment confirming to IS 15658-2006 of M35 grade, complete all as specified and directed.

M&L dry clean sand filling under floors including watering and consolidation, complete all as specified and directed. Note:-Depth of sand shall be measured after punning.

M&L for PCC 1:2:4 type B1 (20mm graded aggregate as in kerbs around chequered tiles and paver block and in coping, benching etc. slightly rounded or chamfered angle and throating, complete all as specified and directed.

Material and Labour for point wring, using approved colour coding (Phase-red,Neutral-black,Earth-green) complete for one socket outlet 15 Amp on independent board with FRLSH PVC insulated and unsheathed stranded copper conductor cable 2.5 sqmm single core conforming to IS 694 including medium duty concealed unplasticised PVC conduit conforming to IS 9537(part-3) and ISI marked not less than 20 mm dia with concealed in wall pressed steel terminal box of not less than 2 mm thick of required size including painting terminal boxes inside and outside with two coat of synthetic enamel paint over one coat of red oxide primer with top cover 3 mm thick bakelight laminated sheet with brass screws and Cup washer with all accessories including FRLS PVC insulated and unsheathed stranded copper conductor cable 2.5 sqmm single core in green colour as earth wire connected to earth dolly complete all as specified and directed.

S&F switch piano, 1 way 16A, 1 module 240 Volts with suitable size of sheet and cover, complete all as specified and directed.

S&F for Socket outlet 6A/16A - 6 pin combined 2 module, with suitable size of sheet and cover, complete all as specified and directed.

S&F switch piano flush button single pole one way 15 Amp, 240 Volts conforming to IS 3854 ISI marked including taking down old one all as specified and directed.

S&F for socket outlet, 3 Pin, 15 Amp flush type conforming to IS 1293 ISI marked including taking down old one complete all as specified and directed.

Suuply and Fix portable air cooler plastic made powerfull fan wiith 8500 Cum/hour air flow capcity and power consumption upto 250 watt fully closable louvers with control knobs and 125L tank capacity cool flow dispenser 3 side honey comb coooling pads with inbuilt four unit castor wheel with ordering code symphony MOVICOOL L 125 or equivalent industrial type, complete all as specified and directed.

Supply and Fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW, capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat NRV, connection pvc pipe piece etc. complete all as specified and directed.

M & L for sub main wiring complete with two runs of 4 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100 Volts grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of walls, roofs etc. with one run of PVC insulated copper conductor 4 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed. Note:- Two runs of 4.0 sq mm cable & one run of 4.0 sq mm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.

S&F Sheet metal enclosure with socket plug top and MCBs single pole with a two pin and earth plug and socket complete with one single pole MCB of "C" series of cap 20 Amps all as specified and directed.

S&F sheet metal enclosures (MCB Distribution board) when MCB’s to be used single pole and neutral 8 ways 240 volts with 100 amps rated bus bar, double door with bus bar neutral link earth bar, Din rail, necessary blanking plated, including fixing DB flush in wall complete with making good disturbed surfaces and colour matching all as specified and directed .

S&F MCB’s single pole, 10 KA ,32 Amp to 40 Amp 240 Volts, and of ''C'' series with required wiring connections and lugs etc. and erecting in provided enclousre/destribution board. MCBs shall be of current limiting type, ISI marked conforming to IS 8828-1996, complete all as specified and directed.

S&F MCB’s DP, 10 KA, 32 Amp to 40 Amp 240 Volts, and of ''C'' series with required wiring connections and lugs etc. and erecting in provided enclousre/destribution board. MCBs shall be of current limiting type, ISI marked conforming to IS 8828-1996 complete all as specified and directed.

M&L for GI tubing medium grade 15 mm on walls/poles, with all fittings, complete all as specified and directed.

M&L for Plug type bib taps, cast iron, screwed for iron pipe suitable for 15mm dia including insertion of T section of 15/20 mm existing hosehold water pipeline for geyser connection complete all as specified and directed.

Taking down carefully copper / aluminium point wiring (Light/Fan/Socket/power) complete including fittings and fixtures such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. and making good the disturbed surfaces of walls/ floors etc. complete all as specified and directed .

Taking down submain wiring of any size/description from wooden battens/PVC conduits from walls/floors/ceiling etc., complete and making good the disturbed area all as specified and as directed.

Material and Labour for concealed point wring, using approved colour coding (Phase-red,Neutral-black,Earth-green) complete with FRLS PVC insulated and unsheathed stranded copper conductor cable 1.5 sqmm single core conforming to IS 694 including medium duty concealed unplasticised PVC conduit conforming to IS 9537 (part-3) and ISI marked not less than 20 mm dia with concealed in wall pressed steel terminal box of not less than 2 mm thick of required size including painting terminal boxes inside and outside with two coats of synthetic enamel paint over one coat of red oxide primer with top cover 3 mm thick bakelight laminated sheet with brass screws and Cup washer with all accessories including FRLS PVC insulated and unsheathed stranded copper conductor cable 1.5 sqmm single core in green colour as earth wire connected to earth dolly complete all as specified and directed for the following: - One light/fan/exhaust fan point controlled by 1 No. one way 5/6 Amp switch.

One 3/5 pin socket outlet 5 Amp controlled by 1 No. of one way 5/6 Amp switch on same board along with other switches, fan regulator etc.

One 3/5 pin socket outlet 5 Amp controlled by 1 No. of one way 5/6 Amp switch on independent board.

S&F switch piano flush button single pole one way 5/6 Amp, 240 Volts conforming to IS 3854 ISI marked all as specified and directed.

S&F for socket outlet, 5 Pin, 5/6 Amp flush type conforming to IS 1293 ISI marked all as specified and directed.

S&F ceiling rose, surface Bakelite, isolated body three terminals including taking down old one complete all as specified and directed.

Supply and Fix exhaust fan, steel body, copper winding heavy duty AC single Phase, 230V of size 450mm sweep with blades, and frame and louvers complete all as specified and directed.

Supply and fix LED flood light 70 watt, 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp including all fixing arrangements on metallic sheets complete all as specified and directed.

Supply and fix LED lights fitting 1x 20W, 220V, 4 ft, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

M&L Point wiring using approved colour coding as per IS, with Zero Halogen Flame retardant (HFFR), smoke free, non toxic, non corrosive installation cable with UNILAY construction copper conductor 1.5 Sq. mm (nominal area), single core, insulated and unsheathed stranded cable 1100 Volts grade ISI-694 marked TEC and FIA approved in & including heavy duty, electric resistance welded (ERW) 20 mm stove enameled surface Steel mounted conduit, heavy duty ISI marked as per IS:9557 (Part I) 1980, including HFFR insulated unsheathed unitary construction copper conductor 1.5 Sq. mm nominal cross sectional area wire as earth continuity conductor up to common earth and connecting to earth dolly all as specified and directed. All conduit accessories such as bends elbows Tee etc. shall be Flame proof certified by CMRS Dhanbad for the followings :- (a) One light/fan point controlled by one switch

M&L Point wiring for socket point using approved colour coding as per IS, with Zero Halogen Flame retardant (HFFR), smoke free, non toxic, non corrosive installation cable with UNILAY construction copper conductor 2.5 Sq. mm (nominal area), single core, insulated and unsheathed stranded cable 1100 Volts grade ISI-694 marked TEC and FIA approved in & including heavy duty, electric resistance welded (ERW) 20 mmstove enameled surface Steel mounted conduit, heavy duty ISI marked as per IS:9557 (Part I) 1980 , including HFFR insulated unsheathed unitary construction copper conductor 2.5 Sq. mm nominal cross sectional area wire as earth continuity conductor up to common earth and connecting to earth dolly all as specified and directed. All conduit accessories such as bends elbows Tee etc shall be Flame proof certified by CMRS Dhanbad.

M&L for flame proof switch socket & plug combined point controlled by single pole one way 16 Amp ON-OFF rotary switch. Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P+earth complete all as specified and directed.

S&F in repair flame proof weather rotary switch with cable terminal box in cat aluminum alloy ( LM-6) construction, epoxy powder coated, single pole 16 Amp ON/OFF type, 230 V AC, certified by CMRS for Group IIA & IIB complete including compression glands complete all as specified and directed.

M&L for sub main wiring with approved colour coding as per IS (Red, Black and green for single phase circuits) with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable (Red & Black colour) of size 4.0 sq. mm drawn in and including heavy duty, electric resistance welded (ERW) 25 mm stove enameled surface Steel mounted conduit, heavy duty ISI marked as per IS:9557 (Part I) 1980 with its accessories, surface type, including one run of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable (Green colour) of size 4.0 sq mm as earth continuity and connected of common earth dolly complete all as specified & directed. Note:- Two runs of 4.0 sq mm cable & one run of 4.0 sq mm cable alongwith steel conduit including its accessories shall be measured and paid one unit length.

Supply and fixing LED light fitting 1x30 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable complete all as specified and directed.

S&F LED downlighter square shape PDC aluminium housing with 100 Lm/W efficacy, 12 Watt, 220 Volts with ordering code Crompton CDR 205 12 57 SL NWH or equivalent in havells/Bajaj, complete all as specified and directed.

Supply and fixing LED batten type tube light complete fitting 1x 10 W, 220V, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified by engineer-in-charge.

S&F LED pyramid tripod type bollard made up of extruded aluminium with PC diffuser 10 watt with ordering code Crompton LBLSN-10-CDL or equivalent in Havells/Bajaj as approved, complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver with minimum 100 Lm/W, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F MCB’s single pole, 10 KA , 32 Amp to 40 Amp 240 Volts, and of ''B'' series with required wiring connections and lugs etc. and erecting in provided enclouser/distribution board. MCB's shall be of current limiting type, ISI marked conforming to IS 8828-1996, including taking down old one complete all as specified and directed.

S&F MCB’s DP, 10 KA, 32 Amp to 40 Amp 240 Volts, and of ''B'' series with required wiring connections and lugs etc. and erecting in provided enclouser/distribution board. MCB's shall be of current limiting type, ISI marked conforming to IS 8828-1996, including taking down old one complete all as specified and directed.

S&F sheet metal enclosure 2 way single door IP-43 with complete including one single pole neutral MCB 6A, 10 KA "C" series flush into walls and making good disturbed surfaces, complete all as specified and directed.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections 4 sq mm multi stranded complete all as specified and as directed.

M&L for GI tubing medium grade 40 mm fixing in upright position of size 1.0/1.2 mtr embedded in PCC foundation for fixing of bollard light complete all as specified and directed.

M&L for PCC 1:2:4 type B-1, using 20 mm graded aggregate mechanically crushed stone for mass filling in coping of pole including foam work complete all as specified.

Bikarma Enterprise