Transportation, Installation, Commissioning, Necessary Fabrication and Trial run including Civil work of one 1000 mm width 2x150KW, 6.6KV PVC Belt Conveyor for a length of 90 mtr. in Panel 7A along 12XR/15L with heightening and further installation o

Part A: Installation of 1000mm complete belt conveyor for a length of 90 metre at Panel 7A

Transportation of one 6.6KV VCB, DOL HT Starter from surface to 12XR/16L after loading it on MUV then unloading and placing manually on platform

Transportation of 250 mtr., 6.6 KV grade 120 Sq.mm armoured cable from surface to CM panel with the help of MUV and laying and hanging it at underground

Transportation and installation of drive head complete with drive drum, driven drum, gear box, motor, couplings, bearing blocks, fencing etc. to CM panel with the help of MUV

Transportation and installation of discharge unit complete with cleaner at CM panel with the help of MUV

Transportation and installation of loop take-up unit complete with fencing at CM panel with the help of MUV

Transportation and installation of tail-end unit complete at CM panel 7A with the help of MUV

Transportation and installation of 90 mtr. of belt structure, after loading it on MUV at CM panel (weight of 1000 mm structures is 0.085 T/mtr.)

Transporting, laying, lapping & jointing of 200 mtr. of belting (20 mtr. belt in loop)

Laying of sequence cable (100 mtr.), pull cord, lockout cable and audio cable throughout the belt line of 90 metre. Fitting of pull cord switches and communication devices along the belt

Supply of M.S. Nut & Bolt 5/8"

Supply of G.I. wire 8 SWG (for signalling system)

Supply of Bobbin insulator. Considering 2 nos. in 9 mtr

Supply of Oxygen cylinder (7.1 cu.m./cylinder)

Supply of DA cylinder (6.2 cu.m / cylinder)

M.S. Nut & Bolt 3/8" × 3" with washer (for signalling system).

Part B: Installation of one 1000mm wide PVC belt conveyor for a length of 300 mtr. in R-V seam, Panel 7A at MIC, Jhanjra Project Colliery.

Transportation and installation of 300 mtr. of belt structure, after loading it on MUV from surface (weight of 1000 mm structures is 0.085 MT/mtr.)

Transporting, laying, lapping & jointing of 600 mtr. of belting

Shifting and installation of tail end for every shifting (wt = 0.945 × 9 Te = 8.505 Te)

Installation of pull cord, signalling and lock-out devices

Supply of M.S. Nut & Bolt (M16×40)

Supply of G.I. wire 8 SWG

Supply of Bobbin insulator

Supply of M.S. Nut & Bolt (3/8" × 3") with washer

Part C: Heightening of Belt Conveyor(20pairs structure) at Panel 7A in RV seam including necessary fabrication jobs and required alignment at MIC,JPC.

Heightening of Belt Conveyor (20 nos. pair structure) including 12XR in RV seam, including necessary fabrication jobs and required alignment at MIC, JPC

Supply of M.S. full threaded Bolt & Nut full threaded 5/8" × 2"

Supply of Oxygen cylinder (7.1 cu.m / cylinder)

Supply of DA cylinder (6.2 cu.m / cylinder)

Total impact of GST for the purpose of CTC

Please Enable Macros to View BoQ information