Repair and replacement of certain UNSV parts of steel furniture including painting under GE(S) Jaipur

Amount

Almirah Large steel (FD-1031)

Taking out old unserviceable existing handle and S&F chromium plated handles including necessary nut, bolts, washer etc for almirah large steel.

Taking out existing shelves and making the same in functioning condition including necessary nuts, bolts, clips and washer etc of almirah large steel all as directed.

Removing existing locking device with MS plate rod and S&F new locking device with plate rod complete in almirah large steel as directed.

Taking out old unserviceable lock of Almirah large steel and S&F lock with six levers locks and hole cover with duplicate keys.

Taking out old unserviceable leg of almirah large steel and S&F new legs made out of 20 gauge MS sheet made to shape and sizes shown on drawing all as directed.

Taking out of unserviceable door of almirah large steel and S&F new door made out of 1.00mm thick MS Sheet

M&L Gas welding where required and filling properly at places of welding point and as per directed by Engr-in-Charge

M&L preparation old painted steel surfaces by cleaning and applying one coat of synthetic enamel paint olive green/grey with spray gun or by manual brush with roller as per requirement in appropriate shade complete all as specified and directed but Almirah large steel with shelves both side (out side and in side)

Almirah steel 1/2 hanging 1/2 shelves ( FD/E6/Map/18)

Taking out old unserviceable existing handle and S&F chromium plated handles including necessary nut, bolts, washer etc for almirah steel 1/2 hanging 1/2 shelves

Taking out existing shelves and making the same in functioning condition including necessary nuts, bolts, clips and washer etc of almirah steel 1/2 hanging 1/2 shelves all as directed.

Removing existing locking device with MS plate rod and S&F new locking device with plate rod complete in almirah steel 1/2 hanging 1/2 shelves as directed.

Taking out old unserviceable lock of almirah steel 1/2 hanging 1/2 shelves and S&F lock with six levers locks and hole cover with duplicate keys.

Taking out old unserviceable leg of almirah steel 1/2 hanging 1/2 shelves and S&F new legs made out of 20 gauge MS sheet made to shape and sizes shown on drawing all as directed.

Taking out of unserviceable door of almirah steel 1/2 hanging 1/2 shelves and S&F new door made out of 1.00mm thick MS Sheet

M&L Gas welding where required and filling properly at places of welding point and as per directed by Engr-in-Charge

M&L preparation old painted steel surfaces by cleaning and applying one coat of synthetic enamel paint olive green/grey with spray gun or by manual brush with roller as per requirement in appropriate shade complete all as specified and directed but almirah steel 1/2 hanging 1/2 shelves with shelves both side (out side and in side)

Almirah medium steel (FD-1032)

Taking out old unserviceable existing handle and S&F chromium plated handles including necessary nut, bolts, washer etc for almirah medium steel.

Taking out existing shelves and making the same in functioning condition including necessary nuts, bolts, clips and washer etc of almirah medium steel all as directed.

Removing existing locking device with MS plate rod and S&F new locking device with plate rod complete in almirah medium steel as directed.

Taking out old unserviceable lock of Almirah Medium steel and S&F lock with six levers locks and hole cover with duplicate keys.

Taking out old unserviceable leg of almirah medium/steel and S&F new legs made out of 20 gauge MS sheet made to shape and sizes shown on drawing all as directed.

Taking out of unserviceable door of almirah med steel and S&F new door made out of 1.00mm thick MS Sheet

M&L Gas welding where required and filling properly at places of welding point and as per directed by Engr-in-Charge

M&L preparation old painted steel surfaces by cleaning and applying one coat of synthetic enamel paint olive green/grey with spray gun or by manual brush with roller as per requirement in appropriate shade complete all as specified and directed but Almirah med steel with shelves both side (out side and in side)

Book Case steel (FD-1028, FD 356, FD 69M)

Taking out existing shelves and making the same in functioning condition including necessary nuts, bolts, clips and washer etc of book case steel complete all as specified & directed

S&F lock with six levers locks and hole cover with duplicate keys including taking out old unserviceable lock complete all as specified & directed

S&F sliding glass door including taking out of unserviceable sliding glass door of as per drg all as specified & directed

M&L Gas welding where required and filling properly at places of welding point and as per directed by Engr-in-Charge

M&L preparation old painted steel surfaces by cleaning and applying one coat of synthetic enamel paint olive green/black/grey with spray gun or by manual brush with roller as per requirement (out side and in side) complete all as specified and directed

Bed Hard Steel (FD/E6/MAP/08)

Removing of existing unserviceable ply wood 12mm from bed hard steel and S&F new plywood BWR Phenol bounded commercial plywood with edging 1950mm x 900mm ISI Mark all as per Drg and directed.

Supply and fixing and replacing of unserviceable Head rest (with leg and particle board complete) and S&F new Head rest (with leg and particle board 19mm complete) as per drg

Supply and fixing and replacing of unserviceable foot rest (with leg and particle board complete) and S&F new foot rest (with leg and particle board 19mm complete) as per drg

Removing U/S old long rails and supply and fix new long rail MS tubular pipe size 1920x 65 x 25mm ISI marked required as per drg

Removing U/S middle stiffnere and supply and fix new middle stiffnere duly ISI marked required as per drg and directed

M&L elect welding to Bed Hard Steel where required and filling properly at places of welding point. Elect welding shall be done all round the MS pipe and all welding and filling at one broken point shall be measured as one point ie one unit.

Painting with Synthetic enamel black paint inside & out side after scrapping of rusted paint complete as per drg all as specified and directed

Removing U/S PVC Shoes of Bed Hard Steel and supply and fix new PVC Shoes of Bed Hard Steel required as per drg and directed

Box Kit steel (FD-98(M))

S&F top Plain black iron sheet of 22 gauge shall be provided at top, bottom, sides, shelf and stiffeners and for base, angles and corners 16 gauge plain black iron sheet shall be used incl removal of the UNSV parts

HANDLE: shall be provided with standard PVC recessed handle as shown on drawing.

HASP AND STAPLE : Mild steel safety type, stove enameled 100 mm size, one number shall be provided as directed by Engr-in-charge.

M&L preparation old painted steel surfaces by cleaning and applying one coat of synthetic enamel paint olive green/black with spray gun or by manual brush with roller as per requirement (out side and in side) complete all as specified and directed

Chair Writing steel with Arm (FD-360)

S&F seat and back 12mm, teak ply with ploy urethane foam 50mm thick moulded with density 40 with Raxine of approved colour and shade including taking out old unserviceable seat and back complete all as specified & directed .

Replacement leg as specified in the drawing and as directed by Engr-in-Charge

Replacement of arm rest as specified in the drawing and as directed by Engr-in-Charge

Painting with black paint after scrapping of rusted paint complete by spray gun as per drg all as specified and directed

Chair Writing steel (FD/E6/MAP/12)

S&F seat and back 12mm, teak ply with ploy urethane foam 50mm thick moulded with density 40 with Raxine of approved colour and shade including taking out old unserviceable seat and back complete all as specified & directed .

Replacement leg as specified in the drawing and as directed by Engr-in-Charge

Painting with black paint after scrapping of rusted paint complete by spray gun as per drg all as specified and directed

Chair Barber W/Adj Neck Rest (TP)

S&F seat and back 12mm, teak ply with ploy urethane foam 50mm thick moulded with density 40 with fiber cloth of approved colour and shade including taking out old unserviceable seat and back of chair Barber with adjustable neck rest complete all as specified & directed .

Replacement of unserviceable Arms rest all as specified as per drg and directed by Engr-in-Charge

Replacement of unserviceable Bottom Base with hydrolic assy steel with round shape all as specified as per drg and directed by Engr-in-Charge

Chair School with Hand Board (FD/E6/MAP/05)

S&F seat with back PVC of chair school with hand board with suitable nut & bolt and washer as per drawing and directed, including taking out old unserviceable seat and back of chair school with hand board all as specified & directed .

S&F Hand Board of chair school with hand board with suitable nut & bolt and washer as per drawing and directed, including taking out old unserviceable Hand Board of chair school with hand board. Hand board will be made out of prelaminated particle board 19mm thick ISI Mark, size as per drawing and directed.

S&F Wire mesh of chair school with hand board with Gas welding as per drawing and directed, including taking out old unserviceable wire mesh of chair school with hand board all as specified & directed .

M&L Gas welding where required and filling properly at places of welding point and as per directed by Engr-in-Charge

S&F front/rear legs of chair school with hand board with Gas welding as per drawing and directed, including taking out old unserviceable front/rear legs of chair school with hand board all as specified & directed .

Painting with black paint after scrapping of rusted paint complete by spray gun as per drg all as specified and directed

Chair Verandah (FD-256/ 359M)

M&L gas welding to chair verandah where required and filling properly at places of welding point. Gas welding shall be done all round the conduct pipe and all welding and filling at one broken point shall be measured as one point ie one unit.

M&L hard rubber shoe in legs of chair including removal of broken rubber show.

M&L scrapping of surface of chair verandah frame with emery paper making smooth surface and applying one coat of white synthetic enameled paint all as directed.

Removing of old unserviceable Nylong /Cane and recaning of Verandah Chair seat & back with 4.00mm wide and 0.4mm thick plastic cane half round superior quality white or cream colour as approved by Engr-in-Charge

Removing of old unserviceble side leg with arm frame and S&F new side leg with arm frame made 20mm MS cunduct pipe as per drg fixing with gas welding

Removing of old unserviceable seat & back combined frame and S&F new seat & back frame made 20mm MS cunduct pipe as per drg and fixing with gas welding

Removing of old unservieable front leg stiffener and S&F new front leg stiffener made with 12mm round plain MS Bar as per drg and fixing with gas welding

Chair CB Steel with Arm (FD-75(M))

Taking out old unserviceable seat frame of chair CB steel with Arm and fixing with MS nut and bolts with washer, size of seat frame as per drg

All as per Item No 12.1 above but back frame of chair CB steel with arms

M&L gas welding to chair CB steel with arm where required and filling properly at places of welding point. Gas welding shall be done all round the conduit pipe and all welding and filling at one broken point shall be measured as one point ie one unit.

M&L removing of existing unservicable arm rest of chair CB steel with arm and S&F new arms rest made with IInd class hard wood as per drg and duly black clolour synthetic enamel painted as per drg and directed

Removing of existing unserviceable MS clit of Chair CB steel and S&F by gas welding of new MS clit under the sheet as per drg and directed

M&L scrapping of surface of chair CB steel with Arm frame with emery paper making smooth surface and applying one coat of OG synthetic enameled paint all as directed.

M&L removing of existing unservicable PVC shoes of chair CB steel with arm and S&F new PVC Shoes as directed by Engr Incharge

M&L removing of existing unservicable PVC Plug of Pipe of chair CB steel with arm and S&F new PVC Plug as directed by Engr Incharge

Chair CB Steel without Arm (FD-75(M))

Taking out old unserviceable seat frame of chair CB steel w/o Arm and M&L seat frame 2nd class hard wood duly weaving with white/cream plastic cane 2mm to 2.5mm wide partially rounded off of approved quality and border as specified in drawing including fixing with MS nut and bolt with washer, size of seat frame as per drg

All as per Item No 13.01 above but back frame of chair CB steel without arm (size of back frame as per drg

M&L gas welding to chair CB steel w/o arm where required and filling properly at places of welding point. Gas welding shall be done all round the conduit pipe and all welding and filling at one broken point shall be measured as one point ie one unit.

Removing of existing unserviceable MS Clit of Chair CB steel and S&F by gas welding of new MS Clit under the sheet as per drg and directed

M&L scrapping of surface of chair CBA steel w/o Arms frame with emery paper making smooth surface and applying one coat of OG synthetic enameled paint all as directed.

M&L removing of existing unservicable PVC shoes of chair CB steel w/o arm and S&F new PVC Shoes as directed by Engr Incharge

M&L removing of existing unservicable PVC Plug of Pipe of chair CB steel w/o arm and S&F new PVC Plug as directed by Engr Incharge

Chair Computer/Chair Revolving Adj (FD/E6/MAP/01 & TP)

M&L for removing unserviceable seat and back and S&F new seat & back alongwith the fabric & PVC lipping wherever applicable & replacing the same with new 12mm thick hot pressed phywood upholstered with fabric & moulded polyurethane foam. The back foam shall be designed with contour lumber support with PVC lipping all around. The cushions shall be of 40 density 75mm thick for seat & 50mm thick for back alongwith the fabric of approved quality & colour. All as directed by Engr-in-Charge

M& L for removing unserviceable caster wheel and S&F new castor wheels of Chair Computer/Chair Revolving adjustable

M& L for removing unserviceable hand rest of Chair Computer/Chair Revolving adjustable and S&F new handrest of the chairs with new handrest matching the previous all in shape, size, material & quality

M&L for removing unserviceable and S&F pedestal assembly of revolving chairs with new complete pedestal assembly all matching the sape, size & quality of the existing.

M&L for removing unserviceablehydraulic assembly and S&F for servicing the unserviceable hydraulic assembly & making the seat adjustment functional all as directed by Engr-in-Charge

Chair Visitor Comfort Steel (TP)

M&L for removing unserviceable seat and back and S&F new seat & back alongwith the fabric & PVC lipping wherever applicable & replacing the same with new 12mm thick hot pressed phywood upholstered with fabric & moulded polyurethane foam. The back foam shall be designed with contour lumber support with PVC lipping all around. Design and size as existing and directed by Engr-in-Charge

M& L for removing unserviceable hand rest of Chair Visitor Comfort Steel and S&F new handrest of the chairs with new handrest matching the previous all in shape, size, material & quality and as directed

M& L for removing unserviceable base frame complete of Chair Visitor Comfort Steel and S&F new base frame complete of the chair visitor comfort steel matching the previous all in shape, size, material & quality and as directed

Foam with back steel (FD-78(M))

Taking out old unserviceable planks seat & back and S&F new planks seat and back Hard wood first class with the help of MS nut and bolt with washer, size of planks as per drg

M&L legs made of square MS pipe 25mm, 1.6mm wall thickness fixing neatly all as directed including taking out old unserviceable leg complete all as specified & directed

Supplying and fixing centre stiffeners of long rail made out of 25mm x 25mm square MS pipe of 1.6mm wall thickness as shown on drawing including taking out old unserviceable existing centre stiffenersof long rail complete all as specified & directed

M&L spot welding by gas welding throughout in broken joints of frame all as specified & directed .

Painting of Foam steel with back with olive green after scrapping of rusted paint complete by spray gun as per drg all as specified and directed

M&L for removing unserviceable and S&F PVC rubber shoe black color

Foam with out back (FD-1027)

Taking out old unserviceable planks and S&F new planks hard wood first class with the help of MS nut and bolt with washer, size of planks as per drg

M&L legs made of square MS pipe 25mm, 1.6mm wall thickness fixing neatly all as directed including taking out old unserviceable leg complete all as specified & directed

supplying and fixing centre stiffeners of long rail made out of 25mm x 25mm square MS pipe of 1.6mm wall thickness as shown on drawing including taking out old unserviceable existing centre stiffenersof long rail complete all as specified & directed

M&L spot welding by gas welding throughout in broken joints of frame all as specified & directed .

Painting of Foam steel with out back with olive green after scrapping of rusted paint complete by spray gun as per drg all as specified and directed

M&L for removing unserviceable and S&F PVC rubber shoe black color

Locker steel (FD-1029)

Taking out existing shelves and making in position including necessary elect welding of bed side locker steel as directed by Engr-in-Charge

Replacement of old U/S legs of bed side locker by new legs made out of 18 guage MS sheet made to sape and sizes shown on drawing all as directed by Engr-in-Charge

Taking out of unserviceable door of Bed side locker steel and S&F new door made out of 1.00mm thick MS Sheet

M&L spot welding by gas welding throughout in broken joints of frame all as specified & directed .

M&L preparation old painted steel surfaces by cleaning and applying one coat of synthetic enamel paint olive green/black/grey with spray gun or by manual brush with roller as per requirement in appropriate shade complete all as specified and directed but Bed side locker steel with shelves both side (out side and in side)

Rack side 3/4 spaces steel (FD-1023)

Repairing the rack side 3/4 spaces steel as specified in the drawing by replacing unserviceable shelves with new shelves & fixing them with appropriate nuts & bolts & rebits

Repairing the rack side 3/4 spaces steel as specified in the drawing by replacing unserviceable long angle iron with new long angle iron & fixing them with appropriate nuts & bolts & rebits/Gas welding

M&L spot welding by gas welding throughout in broken joints of frame all as specified & directed .

Painting of rack side 3/4 spaces steel with olive green after scrapping of rusted paint complete by spray gun as per drg all as specified and directed

Rack steel 6 shelves (FD-129M)

Repairing the rack shelf open large steel 6 shelves as specified in the drawing by replacing unserviceable shelves with new shelves & fixing them with appropriate nuts & bolts & rebits

Repairing the rack steel 6 shelves as specified in the drawing by replacing unserviceable angle iron with new angle iron & fixing them with gas welding

M&L spot welding by gas welding throughout in broken joints of frame all as specified & directed .

Painting of rack steel 6 shelvesl with olive green after scrapping of rusted paint complete by spray gun as per drg all as specified and directed

Rack steel 5/6 shelves 1830x1905x305mm (FD-1038)

Repairing the rack shelf open large steel 6 shelves as specified in the drawing by replacing unserviceable shelves with new shelves & fixing them with appropriate nuts & bolts & rebits

Repairing the rack steel 6 shelves as specified in the drawing by replacing unserviceable angle iron with new angle iron & fixing them with gas welding

M&L spot welding by gas welding throughout in broken joints of frame all as specified & directed .

Painting of rack steel 6 shelvesl with olive green after scrapping of rusted paint complete by spray gun as per drg all as specified and directed

Stool steel 305x305x510mm (FD-81)

Repairing the stool steel as specified in the drawing by replacing unserviceable top with new top made out of 1.00mm thick MS sheet proper molding & fixing them with gas welding

Repairing the stool steel as specified in the drawing by replacing unserviceable leg with new leg made out of 1.00mm thick MS sheet proper molding & fixing them with gas welding

M&L spot welding by gas welding throughout in broken joints of frame all as specified & directed .

Painting of stool steel with olive green after scrapping of rusted paint complete by spray gun as per drg all as specified and directed

Stool steel 305x305x610mm (FD-81)

Repairing the stool steel as specified in the drawing by replacing unserviceable top with new top made out of 1.00mm thick MS sheet proper molding & fixing them with gas welding

Repairing the stool steel as specified in the drawing by replacing unserviceable leg with new leg made out of 1.00mm thick MS sheet proper molding & fixing them with gas welding

M&L spot welding by gas welding throughout in broken joints of frame all as specified & directed .

Painting of stool steel with olive green after scrapping of rusted paint complete by spray gun as per drg all as specified and directed

Stool Revolving Adj (FD-1026)

Repairing the stool revolving adj steel as specified in the drawing by replacing unserviceable seat with newseat made out of 12mm thick pressed plywood upholstered with fabric & moulded polyurethane foam. The back foam shall be designed with contour lumber support with PVC lipping all round. The cushion shall be of 40 density 50mm thick for seat alongwith the fabric of approved quality & colur. All as directed by Engr-in-Charge

Repairing/replacement of adjusting assemply (revolving) of the stool revolving adj steel and fixing newadjusting assembly (revolving) of existing as specified in the drawing and as directed by Engr-in-Charge

M&L spot welding by gas welding throughout in broken joints of frame all as specified & directed .

Painting of stool steel revolving adjustable with olive green/black paint after scrapping of rusted paint complete by spray gun as per drg all as specified and directed

Shoe Rack steel (FD/E6/MAP/02/R)

M&L Gas welding where required and filling properly at places of welding point and as per directed by Engr-in-Charge

M&L for painting the frame of the Shoe Rack steel with two coats of synthetic enamel black paint over a coat of primer with the help of spray gun after smoothning the surface with electric ginder complete all as specified & directed

M&L for removing unserviceable and S&F PVC shoes to the legs as applicable complete all as specified & directed

Table Computer (FD/E6/MAP/03, TP)

M& L for removing unserviceable and S&F prelaminated top with new top of prelaminated particle board ISI marked and exposed sides of the board to be covered with matching PVC strip as per drg

M&L for removing unserviceable and S&F prelaminated sides with new side of prelaminated board both side laminated of ISI marked and exposed sides of the board to be covered with matching PVC strip as per drg

M&L for removing unserviceable and S&F prelaminated pullout tray with new tray of prelaminated both side laminated of ISI marked and exposed sides of the board to be covered with matching PVC strip.

M&L for removing userviceable and S&F prelaminated bottom shelf with new shelf of prelaminated board both side laminated of ISI marked & pattern as approved by Engr-in-Charge. Exposed sides of the board to be covered with matching PVC lipping

M&L for removing unserviceable and S&F drawer channels with new telescopic channels with smooth run

M&L for painting to all the steel surfaces with spray gun in black color after scrapping off the surface with electric grinder. Make- ASIAN paints/DULUX/ BERGER

M&L for romoving unserviceable and S&F knobs for drawer with new decorative knobs as approved by Engr-in-Charge

M&L for removing unserviceable and S&F PVC shoes to the legs as applicable complete all as specified & directed

Table Bed Side Steel (FD/E6/MAP/15)

M&L for removing unserviceable and S&F back with new back of 18mm thick prelaminated board one side teak face & one side white as approved by Engr-in-Charge ISI marked. Exposed sides of the board to be covered with matching PVC lipping

M&L for removing unserviceable and S&F side with new side of 18mm thick prelaminated particle board both side teak face ISI marked as approved by Engr-in-Charge

M&L for removing unserviceable and S&F top drawer with new drawer of 18mm thick prelaminated particle board one side teak face & one side white ISI marked as approved by Engr-in-Charge. Exposed sides of the board to be covered with matching PVC lipping.

M&L for removing unserviceable and S&F top with new top of 18mm thick prelaminated particle board one side teak face & one side white ISI marked as approved by Engr-in-Charge

M&L for removing unserviceable and S&F bottom drawer with new drawer of 18mm thick prelaminated particle board one side teak face & one side white irrespective of what is shown on drg ISI marked exterior grade as approved by Engr-in-Charge. Exposed sides of the board to be covered with matching PVC liping

M&L for removing unserviceable and S&F knobs for drawer with new decorative knobs as approved by Engr-in-Charge

M&L for removing unserviceable and S&F PVC rubber shoe black color

Removing of unserviceable MS frame of Table Bed side steel and S&F of new MS tubular pipe frame as per drg fixing with elect welding/screw as reqd

Table office officer/clk Steel (FD-1004, FD-1003)

Taking out old unserviceable lock of drawers of table officer office/ clerk/typist steel and S&F lock with four levers locks with duplicate keys.

Taking out existing drawers of table office clerk /officers steel and re-fixing same after necessary setting of drawers for free movement all as directed.

Replacement of Top of table office officers steel with 12 mm thick prelaminated particle board ISI mark with teak wood beadings. FD-1003

Replacement of Top of table office clk steel with 12 mm thick prelaminated particle board ISI mark with teak wood beadings. FD-1004

Taking out of unserviceable door shutter of Table office officer steel and S&F new door shutter made out of 1.00mm thick MS Sheet and as per drg. FD-1003

Taking out old unserviceable leg of table office officer/clk steel and M&L legs made of square MS tubular pipe 25mm, 1.6mm wall thickness fixing neatly all as directed and as per drg. FD-1003 & FD-1004

Taking out old unserviceable front & back long rail of table office officer/clk steel and M&L front rail made of square MS tubular pipe 25mm, 1.6mm wall thickness fixing neatly all as directed and as per drg. FD-1003 & FD-1004

Taking out old unserviceable side rail of table office officer/clk steel and M&L front rail made of square MS tubular pipe 25mm, 1.6mm wall thickness fixing neatly all as directed and as per drg. FD-1003 & FD-1004

M&L Gas welding where required and filling properly at places of welding point and as per directed by Engr-in-Charge FD-1003 & FD-1004

M&L preparation old painted steel surfaces by cleaning and applying one coat of synthetic enamel paint olive green/grey with spray gun or by manual brush as per requirement in appropriate shade complete all as specified and directed FD-1003 & FD-1004

M&L for removing unserviceable and S&F PVC rubber shoe black color FD-1003 & FD-1004

Table 3' x 3' steel (FD-1009)

Replacement of Top of table 3'x3' steel with 12 mm thick prelaminated particle board ISI mark with teak wood beadings.

Taking out old unserviceable leg of table 3'x3' steel and M&L legs made of square MS tubular pipe 25mm, 1.6mm wall thickness fixing neatly all as directed and as per drg.

Taking out old unserviceable front & back long rail of table 3' x3' steel and M&L front rail made of square MS tubular pipe 25mm, 1.6mm wall thickness fixing neatly all as directed and as per drg.

Taking out old unserviceable side rail of table 3'x3' steel and M&L front rail made of square MS tubular pipe 25mm, 1.6mm wall thickness fixing neatly all as directed and as per drg.

M&L Gas welding where required and filling properly at places of welding point and as per directed by Engr-in-Charge

M&L preparation old painted steel surfaces by cleaning and applying one coat of synthetic enamel paint olive green/black/grey with spray gun or by manual brush as per requirement in appropriate shade complete all as specified and directed

M&L for removing unserviceable and S&F PVC rubber shoe black color

Table 3'x2' W/O drawer steel (FD-1007)

Replacement of Top of table 3'x2' W/o drawer steel with 12 mm thick prelaminated particle board ISI mark with teak wood beadings.

Taking out old unserviceable leg of table 3'x2' W/o drawer steel and M&L legs made of square MS tubular pipe 25mm, 1.6mm wall thickness fixing neatly all as directed and as per drg.

Taking out old unserviceable front & back long rail of table 3' x2' W/o drawer steel and M&L front rail made of square MS tubular pipe 25mm, 1.6mm wall thickness fixing neatly all as directed and as per drg.

Taking out old unserviceable side rail of table 3'x2' W/o drawer steel and M&L front rail made of square MS tubular pipe 25mm, 1.6mm wall thickness fixing neatly all as directed and as per drg.

M&L Gas welding where required and filling properly at places of welding point and as per directed by Engr-in-Charge

M&L preparation old painted steel surfaces by cleaning and applying one coat of synthetic enamel paint olive green/black/grey with spray gun or by manual brush as per requirement in appropriate shade complete all as specified and directed

M&L for removing unserviceable and S&F PVC rubber shoe black color

Table 3'x2' With drawer steel (FD-1008)

Replacement of Top of table 3'x2' with drawer steel with 12 mm thick prelaminated particle board ISI mark with teak wood beadings.

Taking out old unserviceable leg of table 3'x2' steel with drawer and M&L legs made of square MS tubular pipe 25mm, 1.6mm wall thickness fixing neatly all as directed and as per drg.

Taking out old unserviceable front & back long rail of table 3' x2' with drawer steel and M&L front rail made of square MS tubular pipe 25mm, 1.6mm wall thickness fixing neatly all as directed and as per drg.

Taking out old unserviceable side rail of table 3'x2' with drawer steel and M&L front rail made of square MS tubular pipe 25mm, 1.6mm wall thickness fixing neatly all as directed and as per drg.

Taking out old unserviceable lock of drawers of table 3'x2' with drawer steel and S&F lock with four levers locks with duplicate keys.

Taking out existing drawers of table 3'x2' with drawer steel and re-fixing same after necessary setting of drawers for movement and as per drg and directed .

M&L Gas welding where required and filling properly at places of welding point and as per directed by Engr-in-Charge

M&L preparation old painted steel surfaces by cleaning and applying one coat of synthetic enamel paint olive green/black/grey with spray gun or by manual brush as per requirement in appropriate shade complete all as specified and directed

M&L for removing unserviceable and S&F PVC rubber shoe black color

Table dining OR (FD-165)

Taking out unserviceable top of table dining OR and S&F new Top of table shall be of size 72” x 24” excluding beading. 19mm thick prelaminated particle board ISI Mark with teak wood beadings.

Taking out old unserviceable leg of table dining OR and M&L legs made of square MS pipe 25mm, 1.6mm wall thickness fixing neatly all as directed.

Taking out old unserviceable existing centre stiffeners/long rail of table dining OR and supplying and fixing new one made out of 25mm x 25mm square MS pipe of 1.6mm wall thickness as shown on drawing and directed.

Taking out old unserviceable side stiffener, short rail of table dining OR supply and fixing new one made of 25mm square conduit MS, 1.6mm wall thickness as shown on drawing and directed.

M&L Gas welding where required and filling properly at places of welding point and as per directed by Engr-in-Charge

M&L preparation old painted steel surfaces by cleaning and applying one coat of synthetic enamel paint olive green/black/grey with spray gun or by manual brush as per requirement in appropriate shade complete all as specified and directed

M&L for removing unserviceable and S&F PVC rubber shoe black color

Teapoy Verandah (FD-255)

S&F Top made out of 18/19mm pre-laminated particle board ISI marked incl teak wood beading around as per drawing and directed

Removing of old unserviceble leg and S&F new leg made out of 20mm MS cunduct pipe as per drg fixing with gas welding

M&L spot welding by gas welding throughout in broken joints of frame of teapoy verandah complete all as specified & directed .

Painting of Teapoy Verandah with white paint after scrapping of rusted paint complete by spray gun as per drg all as specified and directed

M&L for removing unserviceable and S&F PVC rubber shoe black color

Teapoy Verandah steel (FD/E6/MAP/17)

S&F Top made out of 18/19mm pre-laminated particle board ISI marked incl teak wood beading around as per drawing and directed

Removing of old unserviceble leg and S&F new leg made out of 20mm MS cunduct pipe as per drg fixing with gas welding

M&L spot welding by gas welding throughout in broken joints of frame of teapoy verandah steel complete all as specified & directed .

Removing of old unserviceble base tray frame and S&F new base tray frame made out of 5mm MS bar as per drg fixing with gas welding

Painting of Teapoy Verandah steel with black paint after scrapping of rusted paint complete by spray gun as per drg all as specified and directed

M&L for removing unserviceable and S&F PVC rubber shoe black color

Trestle store room steel (FD-1043)

Repairing/replacement of front rail of top the Trestel store room steel and fixing new front rail made out of 40x40x6mm MS Angle iron with elect welding and existing as specified in the drawing and as directed by Engr-in-Charge

Repairing/replacement of front rail of bottom the Trestel store room steel and fixing new front rail made out of 40x40x6mm MS Angle iron with elect welding and existing as specified in the drawing and as directed by Engr-in-Charge

Repairing/replacement of side rail the Trestel store room steel and fixing new side rail made out of 40x40x6mm MS Angle iron with elect welding and existing as specified in the drawing and as directed by Engr-in-Charge

Repairing/replacement of stiffener of Trestel store room steel and fixing new stiffener made out of 50x3mm flat iron with elect welding and existing as specified in the drawing and as directed by Engr-in-Charge

Repairing/replacement of suport rail between top & bottom of Trestel store room steel and fixing new suport rail between top & bottom made out of 40x40x6mm MS Angle iron with elect welding and existing as specified in the drawing and as directed by Engr-in-Charge

Painting of Trestel store room steel with olive green/black paint after scrapping of rusted paint complete by spray gun as per drg all as specified and directed

AJAY TRADERS

L.BHIMSEN

Shri Gajanand Enterprises

B.S Constructions

GLOBAL ENGINEERS AND INNOVATORS

F.M. KHAN SONS

C.P.Computers