PROVN OF TOILET BLOCK NEAR BLDG NO R 21 OF 213 FD WKSP COY AND CERTAIN SANCTIONED WORK AT MIL STN SHAHJAHANPUR UNDER GE EAST BAREILLY

Amount

S&F vitreous china wash basin white, flat, back, size 550x400 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe complete all as specified and directed.

S&F Pillar taps 15mm dia cast copper alloy, with capstain heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shank or fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F 32mm dia waste fittings brass chromium plated for basin with long screwed shank and fly nuts, flange end bedded in red lead cement and other end fixed all as specified and directed.

S&F 600mmx450mm bevelled edges mirror consisting of 5.5mm thick commercial plywood and fixed to plug with chromium plated brass screwed and cup washer complete all as specified and directed.

S&F PVC connection 15mm bore length not less than 300 mm long with both ends PTMT nuts complete all as specified and directed.

S&F angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed.

S&F, kitchen sink with drainage board made out of 1mm thick stainless steel with plugs, washers & wastes including CI cantilever bracket & connection union to pipe over all size 915mmx460mm & bowl size 410 x330x160mm complete all as specified and as directed

Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed

Excavating in trenches , n exc 1.5m wide and n exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed

Excavating in trenches ,exc 1.5m wide and n exc 3.0 in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/ loose soil all as specified and directed

Removing excavated material n . Exc 50m and depositing where directed at a level n .exc 1.50m above the starting point in soils.(This soil will be filled under floor area) complete all as specified and as directed

M & L for cement concrete (1: 4 : 8) type D2 ( 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed

M&L Form work to sides of concrete foundations, footings bases of columns, raft and raft beams, sides and soffits ( if any ) of foundation plinth beam and similar work vertical or bottom rough finished surfaces of concrete in flat surfaces complete all as specified and as directed

M&L for RCC DESIGN MIX M25 (20mm graded crushe stone aggregate) as in foundation, including rafts , footing, foundation beams; plinth beams; bases for columns, etc basement slabs, under reamed piles and mass concrete all as specified and directed

S&F Form work to sides of pillers, posts,struts, piers, columns rough finished surfaces square, rectangular or polygonal complete all as specified and as directed

M&L for RCC DESIGN MIX M25 (20 mm graded crushed stone aggregate) as in columns, pillers, piers, posts and struts all as specified and directed.

S&F Form work to sides and soffits of floor or roof beams, beams haunching, girders, bressumers, lintels, cantilevers shelves including supports overhangs etc, also splays between floors and beams etc rough finished surface in flat complete all as specified and as directed

M&L for RCC DESIGN MIX M25 (20mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.50m span as specified and directed

S&F Form work to soffits of suspended slabs such as roof slabs, floor slabs landing and similar work not exceeding 200mm thick (Horizontal or sloping) rough finished surfsces in flat all as specified and directed

M&L for RCC DESIGN MIX M25 (20mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings balconies canopies, deck slabs and in shelves and like all as specified and directed

S&F Form work to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls etc.rough finished surfaces of concrete flats complete all as specified and as directed

S&F Form work to chajjas, trough and similar items including edges of rough finished surface of concrete flat complete all as specified and as directed

M&L for RCC DESIGN MIX M25 (20mm graded crushed stone aggregate) as in Chajjas complete all as specified and as directed

M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed

M&L for Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:6 complete all as specified and as directed

M&L rendering 15mm thick in cement plaster 1:6 on other than fair faces of brick work(Internally) and surfaces finished even and smooth without using extra cement all as specified and directed.

M&L rendering 15mm thick in cement plaster 1:4 on fair faces of brick work(Externally) and surfaces finished even and smooth without using extra cement complete all as specified and as directed

M&L for 5mm thick rendering on concrete surfaces of ceiling in CM 1:3 and rendering is to be finished even and smooth with out using extra cement all as specified and directed.

M&L preparing new plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of alkali resistant priming putty complete all as specified and as directed

M&L for preparing newly plastered surfaces of walls and applying 2 coat of cement base paint over a coat of white wash on wall surfaces of wall complete all as specfied and directed

M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specfied and directed

M&L for sand filling under floor or in foundation including watering and consolidation all as specified and directed

M&L for Hard core of broken stone of gauge exc 63mm but n.exc 100mm, deposited, spread and levelled in layers n. exc 15cm thick, watered and rammed to a true surface all as specified and directed.

M&L 75mm thick Cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base of floor all as specified and directed.

M&L for cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) 25mm thick as in bedding layer for laying floor tiles complete all as specified and as directed

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm (400X400X7mm) in floor, over 15mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed.

M&L for providing Non -skid glazed joint free ceramic tiles coloured 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm in skirting/dado etc laid over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed.

S&F 20mm thick boarding with nails as in cub board shelves in any situation planed one side with butt joints complete all as specified and as direcetd.

S&F 25mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed

S&F hasps and staple 150mm long safety type aluminium anodised with mild steel hinge pin including bolt to hing plate and fixed with screws complete all as specified and as directed

S&F 75 mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and as directed

S&F 75 mm long aluminium anodised tower bolt of extruded section and fixed complete all as specified and as directed

S&F brass chromium plated tubular towel rail , 20 mm dia D type , 60 cm long between franges complete all as specified and as directed

S&F Wardrobe hooks (single) 50 to 60 mm of brass complete all as specified and as directed

S&F 15mm bore angle stop valve of PTMT any colour high prssure screwed for iron pipe and fixed all as specified (minimum wt. 90gms) complete all as specified and as directed

M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing types laid over & including 15mm thick screed bed in CM 1:6 complete all as specified and as directed

M&L for granite (of any type) tiles 20mm thick machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing types over 15mm thick screed bed in CM 1:6 complete complete all as specified and as directed

S&F pressed steel frames size 125mm x 60mm for door with one or more rebates including necessary fixing lugs, hings, lock stike plate etc complete all as specified and directed

M&L for PCC (1:2:4) type B1(using 20mm graded crushed stone aggregate) for fixing of hold fast/filling pressed steel door frame including necessary form work complete all as specified and directed.

S&Fof 35mm Factory made plain framed, panelled shutter (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I) kiln seasoned and chemically pressure treated all as specified and directed.

S&F, 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed as specified and as directed.

S&F, 100 mm long butt hinges, extruded alminium alloy with galvanised mild steel hinge pin, anodised and fixed , type C-21 complete all as specified and as directed

S&F, 100 mm aluminium handles cast type, anodised complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete without glazing bars, dovetailed or welded all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, devotailed or welded all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed.

Supply only galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width ofn aperture1.18 mm complete all as specified and as directed.( Note :- Fixing only rate is included in window/door shutter item considered)

S&F 300mm long mild steel sliding door bolts, bolt or clip type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed

M&L applying two coats of synthetic enamel paints on new wooden surfaces over a coat of pink primer including preparation of surface complete all as specified and as directed

M&L framed work such as grills grating etc with end of bars shouldered and/or riveted welded or forged into spikes framed guard bars iron doors ladders framed bullesters walk ways railings, frame work of water tanks and similar work confirming to Fe.290.Gde-E-165 complete all as specified and as directed

Supply only integral water proofing compound complete all as specified and as directed

S&F fancy type curtain rod MS conduit rod of 20 mm dia PVC coated including fancy type knob and MS bracket for hanging curtain rod complete all as specified and directed

M&L for rendering 15mm thick in CM (1:4) including mixed with WPC as per manufacturers instruction and finishing the surface even and smooth without using extra cement complete all as specified and as directed

M&L for preparation of roof surfaces, applying a coat of primer @ 0.30 Kgs/Sqm applying a coat of bitumen grade 85/25 @ 1.2Kg/Sqm laying of APP modified polymeric water proofing memberane (weight not less then 3Kg/Sqm) and finally finished with a coat of aluminium paint @ 0.20 Kg/Sqm over a coat of bitumen grade 85/25 @ 3 Kg/Sqm as per manufacturers instructions complete all as specified and direcetd.

M&L for preparation of newly plastered surfaces of wall, cornices etc and applying three coats of white wash complete all as specified and directed.

M&L for Non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm(300x300x7mm),laid over and including 15mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed

M&L glazed ceramic coloured tiles of size 300X200X7 mm thick set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as dado/skirting and facea of side bldg over & including 10mm thick rendering in CM(1:4) complete all as specified and as directed.

S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisiting of frame made out of MS tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20 mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing.

S&F, 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed as specified and as directed.

S&F, 150 mm aluminium handles cast type, anodised complete all as specified and as directed.

S&F steel ventilator with top hung shutter including incl hinges steel peg stay complete all as specified and directed

M&L for PCC (1:3:6) Type C1 ( using 20 mm graded crushed stone aggregate) as in plinth protection 75mm thick finished even and smooth without using extra cement complete all as specified and directed

S&F bib taps 15 mm dia chromium plated with crutch or butter fly handle screwed down for iron pipe or brass ferrule and fixed complete all as specified and directed

S&F of 15mm bore of dia concealed stop cock cast copper alloy screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed

S&F PVC connection 15mm bore length not less than 600 mm long with both ends PTMT nuts complete all as specified and directed

S&F of vitreous China squatting pan Orissa pattern size 580 X 440 mm with integral foot rest white (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti syphonize pipe etc complete all as specified and dircetd.

S&F 10 ltrs PVC valveless syphonic action type flushing cistern low level white , with inlet ball valve, float and handle including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed.

S&F 125mm size swivel shower rose brass chromium plated long body fixed complete all as specified and directed

S&F rotational moulded polyethylene water storage tank of 1000 ltr capacity consisting of three laver (cylindrical vertical with top closed) hoisted and fixed in position including GI nipple 20mm dia fixed in water tank complete all as specified and directed

S&F 20 mm dia Ball valves ,high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule all as specified and directed.

S&F 20mm bore Gun-metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed

S&F towel rail 450 mm long of PTMT fixed with and including chromium plated brass screw and wooden / plastics cleats ( min wt 170 gms) complete all as specified and as directed

S&F shelf of PTMT fixed with and including chromium plated brass screws and wooden /plastic cleats (Min wt 300 gms) complete all as specified.

S&F 125mm grating doom with waste hole of PTMT (Min wt 40 gms) complete all as specified.

S&F 32mm dia waste coupling of PTMT (half or full threaded). (Min wt 32mm - 45 gms) complete all as specified and directed

S&F 32mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceiling or in floors etc complete all as specified.

Cutting chases for GI consealed water tubing and making good with cement sand mortar 1:3 cutting n exc 10cm girth complete all as specified and as directed

S&F 15mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floor complete all as specified and as directed

S&F 20mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floor complete all as specified and as directed

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified and as directed

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed

S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed

S&F 75mm dia PVC (SWR) floor trap plain with grating incl jointing with solvent cement complete all as specified and directed

M&L PVC (SWR) gully trap 125X110mm setting in jointing with solvent cement complete all as specified and directed

S&F 100mm dia stack clamps out of 50mmx5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to ball or roof complete all as specified and as directed

S&F 110mm bore PVC (SWR) bends with oval access door complete all as specified and directed

S&F 75mm bore PVC (SWR) bends with oval access door complete all as specified and directed

M&L for Mild steel TMT bars 10mm dia and over, cut to length , bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified.

M&L for Mild steel TMT bars 6mm to 8mm dia , cut to length , bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified.

M&L for Mild steel TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups, spaces and binders , cut to length , bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified.

S&F 4.8mm thick frosed sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed.

S&F Vitreous China bowl urinal flat back, size of 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

M&L Concrete bed to drain pipes of 200 mm dia including packing under and haunching against the sides of pipe after they are laid and tested in cement concrete (1:3:6) Type C-2 ( using 40 mm graded crushed stone aggregte) complete all as specified and directed.

S&F Re-inforced concrete pipes of Class NP3 of 200 mm dia laid and jointed complete all as specified and directed.

Construction of 20 users septic tank,exc in ordinary soil,foundation,PCC (1:2:4) Type B1,Brick work in Cm (1:4),RCC,Slab covers including RCC precast manhole cover having 6 mm plate embedded all around ,fibre reinforced cover with angle iron frame,vent shaft and sludge chambers etc complete all as specified and as directed and as shown in drg no TD/217 amended upto date.

Taking down cement plaster including racking out joints hacking for key and scrubbing down with water etc complete all as specified and as directed

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed.

Taking down steel/wooden window of any size and description complete.

M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paints over one coat of red oxide primer complete.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises

S&F in repair vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests excluding flushing cictern and flush pipe all as specified

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white(excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed.

Supply only plastic water closet seat cover black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and as directed.

S&F for CP Health Faucet with 1 Meter Flexible tube & Hook (Make- L&K or equivalient) complete all as specified an directed.

S&F in repairs 15mm dia two way angle valve, cast copper alloy, chromium plated screwed down, high pressure with crutch or butterfly handle complete all as specified and directed.

S&F Jet spray chromium plated with 1mtr heavy PVC hose butterfly type, with chromium plated nuts complete all as specified and directed.

S & F in Repair 10 ltrs capasity PVC valveless syphonic action type flushing cistern low level white , with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and as directed.

S&F in repairs Vitreous China bowl urinal flat back, size of 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.

S&F (in repairs) Bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed..

S&F (in repairs) angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bpre of pipe complete all as specified and as directed.

S&F in repair swivel shower rose of brass Chromium plated for fixing with 15mm pipe fixed complete all as specified and as directed.

S&F in repair vitreous china wash basin white, flat, back, size 550x400 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe all as specified

S&F in repairs 15mm bore pillar tap cast copper allloy with capstan head Chromium plated scwed down with or without letter Hot or Cold with long shank and fly nuts scrwed for iron pipe and fixed as specified and directed.

Supply only low density polyethylene (LDPE) pipes of pressure rating 6 Kg/Sq cm.

S&F in repair CP towel rail 20mm dia, 450 mm long between flanges

Dismantling timber scantling 40 sqm cm and over in section , in any position as in unframed work complete all as specified and as directed.

S&F rolled mild steel in main and cross beams, hip and jack rafters , purlins where connectied to common rafters and running rails and fixed with angle cleats or other connecting plates of Fe 410-W (Gde E-250 quality B). complete all as specified and as directed.

Dismantling Asbestos Cement/CGI (Corrugated, Semi corrugated etc.) sheets in roof coverings complete all as specified & directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws to steel frame work, as specified.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified & directed.

S&F 12 mm thick accoustic perforated tiles fixed or laid/inserted to GI frame work of grid size 605x605mm as in false ceiling all as specified, including Hangers 6 mm dia GI (upto 1200 mm in length) adjusting levels fixed to roof slabs by cieling cleats made of GI flat 40 x 3 mm size 60 mm long complete complete all as specified & directed.

M&L for plain cement concrete 1:5:10 type E-2 ( using 40mm graded crushed stone aggregate) as in foundation/mass concrete complete all as specified.

M&L for plain cement concrete type B1 1:2:4 using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span , cills steps seismic and other similar bands, copings rounded or chamferred ends and throating complete all as specified & directed.

M&L for cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate , 40mm thick finished even and smooth without using extra cement.

Spreading and levelling in layers n exc 25 cm thick , well ramming including watering as required.

S&F rolled mild steel joist, channel , angles or tee sections , rafters, purlin where connected to common rafters fixed with angle cleats or other connected plates etc complete of Fe-410-W (Gde E-250) quality 'B'.complete all as specified & directed.

M&L for plain cement concrete 1:2:4 type B-2 using 40mm graded crushed stone aggregate as in foundation/walls etc complete all as specified.

M&L for providing cement concrete type B-1 1:2:4 (20 mm graded stone aggregate) as in copings complete all as specified and directed.

S & F Mild steel work as in chowkats/frame of door or gates of angle or other section with gusset plate , rail braces etc complete drilled for fixing of steel sheeting or other covering , doors etc to be prepared for hanging or sliding with and inclu either hooks and hinges or steel hanging door fittings ( exclusive of steel , sheeting or other covering , running rails and guisides ) and hanging also fastening and fixing complete

Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out , returning , filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm , watering and removing surplus soil to a distance n exc 50m and making good sufrace in soft/loose soil.

M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation/mass concrete complete all as specified.

M&L for plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation/mass concrete complete all as specified.

S&F post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc , flat iron fillets (for securing wire mesh etc) including all necessary drilling , bolting and riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed

S&F mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 30 cm long and dia meter of neck in mm n exc. 12mm complete all as specified and as directed

Supply and Fixing chain link fencing including line wires, any mesh size and type of any type of standards , rails , straining bolts etc including provision of binding wire. Wt 3 to 4 Kg per Sqm complete all as specified and as directed

S&F Galvanised 2 strand , steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rail straining bolts including securing or tying at crossings with and provisons of galvanised mild steel wire, staples or steel pins etc as directed (each line wire to be measured).

S&F 4mm dia galvanised steel wire 150 x 100 mm mesh, made up into mattresses or cages, lapped, wired and laid in position , including closing after filling complete all as specified.

Cutting holes into or through brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar or wall of lime concrete and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required, suferfacial area of cutting exceeding 150 sqcm but not exc 400 sqcm complete all as specified and as directed

S&F rolled mild steel in joist , channel, angle or tie sections fixed independently without connecting plates etc (cut to ordinary length i.e. within 20 mm of the length indicated) as in posts and struts in fencing including cutting tops to shape as directed , drilling holes , notching for wire etc ,flat iron fillets ( for securing wire etc ) including all necessary drilling , bolting or riveting, etc and similar work , MS flat iron of any size etc complete all as specified and as directed

Surface dressing not exc 15 cm deep in soft/loose soil complete all as specified and as directed

M&L for cement concrete type C-2, 1:3:6 (40mm graded aggregate) 100mm thick as in sub base of floor complete.

M&L for cement concrete type B-1, 1:2:4 (20 mm graded stone aggregate) 100 mm thick as in flooring and finishing cement concrete surface even and smooth without using extra cement complete.

M&L for forming contraction (Dummy joint) 65mm deep x 10mm filled with sealing compound grade 'A' complete all as specified and directed.

M&L for cement concrete, 1:3:6 type C-2 (40mm graded aggregate) 150mm thick as in sub base of floor complete all as specified and directed.

S&F for MS framed work of angle , tee, FI conforming to FE-290 (Gde E-165) as in roof trusses including distance pieces , cleats etc welding or rivetted complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI bases plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge, roof covering/cladding to wall, fixed with self tapping screws as specified.

Cutting holes into or through reinforced cement concrete slabs , chajjas etc reinforced or otherwise superfacial area exc 100 sqm cm but n exc 250 sq cm complete all as specified and as directed

M&L for cement concrete type B-1, 1:2:4 (20 mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, water tank caging etc complete.

Removing excavated material (soil) exc 250m but n exc 500 m all as specified and directed

M&L 100mm thick Cement concrete Type B-2 (1:2:4) by using 40 mm graded aggregate as in floors all as specified and as directed

M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-290 Gde E-165 complete all as specified and as directed

Mild steel screw bolts ( machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers hexagonal or squareand one nut, n exc 5cm long Dia of neck 11 to 15mm complete all as specified and as directed

Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed

M&L for Vitrified light shade colored ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and incl 15mm thick screed bed in CM 1:6 complete complete all as specified and as directed.

M&L for Vitrified light shade colored ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in skirting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and incl 10mm thick screed bed in CM 1:4 complete complete all as specified and as directed.

M&L rendering 12mm thick in cement plaster 1:6 on surfaces other than fair faces of brick work and surface finished even and smooth without using extra cement complete all as specified and as directed

Demolition of cement concrete (un reinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

S&F in repair plastic water closet seat cover black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device all as specified and directed.

S&F in repair 15mm bore angle stop valve of cast copper alloy chromium plated high prssure screwed for iron pipe and fixed all as specified.

S&F in repair 75 mm dia PVC (SWR) floor trap plain with greting incl jointing with solvent cement complete all as specified and as directed

Dismantling of existing water tanks capacity n exc 500 ltr and removing to store complete all as specified and as directed

S&F rotational moulded polyethylene water storage tank consisting of three laver cylindrical vertical with top closed hoisted and fixed in position all as specified and directed capacity 500 ltrs.

S&F 15 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe complete all as specified and as directed

M&L taking up or down existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed for 15mm bore

M&L taking up or down existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed for 20mm bore

Refixing 15mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) complete all as specified and as directed

Refixing 20mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) complete all as specified and as directed

Taking up or down existing asbestos cement pressure pipe any class ,(including all fitting ) including disconnecting pipes and fittings complete

S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints fixed to wall all as specified

S&F 75mm bore.PVC(SWR) junction single (single T) equal or unequal complete all as specified and as directed

S&F 110mm bore.PVC(SWR) junction single (single T) equal or unequal complete all as specified and as directed

S&F 75 mm dia stack clamps out of 50mmx5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to ball or roof

Cutting existing steel tubing for alterations or additions (each cut measured) of 15mm bore pipe.

S&F PVC connection 15mm bore length 450 mm long with both ends PTMT nuts complete all as specified.

Taking down of chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm (without taking off shutters from the frames)

S&F aluminium anodised sliding windows ,shutter glazing with and including 4.8 mm thick tinted glass fixed with rubber gasket with aluminium beading, clips , frame, with duco pattern grill of size 75 mm X 75 mm and steel mosquito wire netting fixed with beading made with aluminium section suitable for three track slids . Making good of wall surfaces to match with existing surfaces complete all as specified and directed.

S&F alluminium alloy anodised door frame fixed with side hung shutters and glazing fixed with and including 4.80 mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed :- (a) Frame 80x44x1.98mm thick with rawl plug (b) Middle and lock rail : 150x44x1.98mm thick (c) Bottom rail : 150x44x1.98mm thick (d) Top rail/sype : 85x44x1.98mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, 100 mm long steel butt hinge ,aluminium tower bolt 9.9mm dia shoot 200mm long brass mortice lock 100mm 4 leaver ,aluminium stopper, hydraulically regulated door closer ( Make Sandhu ISI marked or ites equivalent approved make) (g) Making good of wall surface to match with existing surface complete.

Demolition of Unreinforced cement concrete in ground floors and pavings n.exc 15cm thickness below or above ground level.

M&L providing non- skid ceramic tiles coloured 7-8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but n xc 0.38 sqm, in floor etc including 15 mm thick screed bed in CM mortar 1:6 set and joited with neat cement slurry and pointed in coloured cement inclu to match the shade of tiles complete all as specified and as directed.

M&L providing glazed ceramic tiles coloured 7-8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but n xc 0.38 sqm, in dado/skirting etc including 10 mm thick screed bed in CM mortar 1:4 set and joited with neat cement slurry and pointed in coloured cement to match the shade of tiles complete all as specified and as directed.

M&L for providing, cement concrete in 1:3:6 type C-1 using 20mm graded stone aggregate as in roof cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs all as specified and directed.

S&F of Welded steel wire fabric of weight n. exc 4 Kg per sqm (50mm nominal pitch and 3mm dia of wire) to steel members complete and laid in position, all as specified and directed.

S&F mild steel screw bolts 5 to 10mm dia of neck (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, complete all as specified and directed.

M&L for 02 coats of Synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description n. exc. 10cm in width or girth not otherwise described, complete all as specified and directed.

S&F 150 mm long hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws/welding complete all as specified and directed.

Material and labour for two single core PVC Insulated unsheathed multi stranded FRLS copper conductor cable of size 2.5 sqmm as sub main wiring including suitable size heavy duty rigid PVC conduit complete with all fittings and accessories but using sunken cast iron or pressed steel terminal box for mounting of switches, sockets etc and of PVC insulated unsheathed multi stranded FRLS copper conductor cable of size 2.5 sqmm as an earth continuity conductor complete all as specified. Make of wire Plaza/Havelles/Finolex (ISI Marked) Make of PVC conduit Diplast/Poly plast/Poly Pack (ISI Marked) NOTE: (i) for wiring in ceiling portion conduit shall be fixed with surface of ceiling/with trusses etc. (ii) Disturbed surfaces of walls,floors filling up of holes, plastering white washing distempering etc matching to the existing etc complete all as specified and directed.

S&F socket out let 3 pin 5/15 Amp multipurpose, piano flush type 240 volt complete.

S &F switch piano flush type 1 way 16A complete all as specified.

S&F Geyser 25 Ltrs capacity 240 volt AC BEE 5 star rated including making connection complete all as specified and as directed by Engr-In-Charge. Make:Bajaj/CG/Philiphs or equivalent. As approved by GE.

S&F 15mm bore angle stop valve of cast copper alloy chromium plated high pressure screwed for iron pipe and fixed all as specified.

Supply and fixing Bip tap 15mm dia ,cast copper alloy chromium plated fency type with crutch or butter fly handle screwed down for iron pipe or brass ferrule and fixed complete.

Taking up or down any type GI / CI /DI / MS pipe 100 mm to 150 mm dia and connections , including cleaning for refixing or removal to store complete all as specified and directed.

Supply, laying,connecting and testing 150 mm bore, ductile iron pipes tyton joint class K- 9 suitable for including rubber joint in standard working length conforming to IS 8329 laid in trenches complete all as specified and directed.

Supply, laying,connecting and testing 100 mm bore, ductile iron pipes tyton joint class K- 9 suitable for including rubber joint in standard working length conforming to IS 8329 laid in trenches complete all as specified and directed.

M&L for Ductile special fitting such as bends,tapers.tee pieces(single and double branch) any type and angle/radius and straight connecting pieces but all end flanged complete all as specified and directed .

S & F sluice valve, class PN-1.6, heavy duty, both ends flanged with steel spindle & check nut, CI operating wheel and all nuts, bolts, washers, gaskets etc; including dismantling of old unserviceable sluice valve complete of the 150 mm dia sizes complete all as specified and directed.

Point wiring in concealed PVC conduit using stranded copper conductor cable of size 1.5 Sqmm, PVC insulated unsheathed FRLS cable complete with all fittings and accessories but using existing sunken cast iron or pressed steel terminal box for mounting of switches, sockets, fan regulators etc but providing new cover 3mm thick laminated,(Hylem) sheet top cover fastened with chromium plated screws and 1.5 Sqmm PVC insulated stranded copper conductor FRLS cable as continues earth wire connected to common earth dolly all as directed and as specified for the following. NOTE: for wiring in ceiling portion conduit shall be fixed with surface of ceiling/with trusses etc for (a) One light/fan point controlled by one switch

Ditto all as per item no 212 (here in before) but One 3-pin socket outlet 5 Amp on independent board.

Ditto all as per item no 212 (here in before) but using 2.5 Sqmm single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for 3 Pin 15 Amps switch socket combination point on independent board including running of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor .

S &F switch piano flush type polycarbonate SP one way 5 Amps complete all as specified and directed

S&F socket out let 3 pin 5 amp multipurpose flash type.

S &F switch piano flush type polycarbonate SP one way 15 Amps complete all as specified and directed

S&F socket out let 3 pin 5/15 Amp multipurpose, flush type 240 volt complete.

S&F ceiling rose surface Bakelite 65 x 50 mm two to three terminals complete.

S&F Decorative box type LED light fitting suitable for 4 ft LT8 -20 watt with blue colored end with LED tube rod 4 ft of 20 watt complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and as directed.

S&F MCB SP 5-32Amps 10 KA C series complete all as specified and as directed by Engr-In-Charge.

Supply and fix MCB SPN 32 -40 Amps 10 KA C series complete all as specified and as directed by Engr-In-Charge.

Supply and fix in replacement MCB DB Single pole and neutral 4 way sheet steel phospetised powder painted with 200 amps rated bus bar with IP 43 protection 240 V nautral link, earth bar and Din rail double door complete all as specified and as direcrted.

Material and labour for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 3.15mm thick, buried directly in ground, vertically to a depth not less than 2.25 mtr deep below ground level with top edge of the earth plate at depth not less than 1.5 mtr below ground level earth plate surrounded by 15 cm thick and packed layers of charcoal, dust and common salt, earth lead GI wire 4mm dia by means of bolts, nuts, check-nuts and washers of galvanized iron and thimbles and of earth wire protected by galvanized iron pipe light grade 15mm bore and water pipe 20 mm bore GI medium grade with funnel and wire mesh complete including excavation and earth work, PCC chamber and cover in cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate in lieu of CI cover and frame etc all as specified and shown in electrical plate No. 5 of SSR-2009 (Part-I).

Supply & fix fans ceiling complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated complete all as specified and directed. Make : Havells ES 50 or equivalent as approved by GE.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6.0 sq mm 2 core complete all as specified and as directed by Engr-In-Chage.

Supply and laying new dry river sand laid in trenches 8cm below the cable and 15cm above the cable and punned to 18cm as cable cushioning and covering all as directed.

Supply and laying in replacement of brick well burnt locally available sub class 'B' laid over sand cushioning for cable protection in trenches width of brick perpendicullar to the length of cable complete all as specified and directed by Engr-in-Charge.

S&F Lamp holder, PVC/polycarbonate type with back plate suitable for pendent fitting and including LED lamp 9 Watt cool day light of complete all as specified and as directed

S &F copper winding exhaust fan of 300mm sweep single phase and making connection complete including cutting of Hole of suitable size all as specified and as directed by Engr-In-Charge Make : Havells/Bajaj/Crompton/Philips or equivalent as approved by GE.

S & F switch socket combination 2/1 multipurpose 3/5 pin 5 and 15 Amps flush type, univarsal 230 Volts complete all as specified and as directed

Supply and Fixing LED mirror light fitting 10 Watt suitable for T-5 batten light fitting complete all as specified and as directed .Make C &S cat No- LTTB2F10WLED/W or equivalent as approved by GE. ( NOTE:- Tenderers may note that amount of credit will be deducted from the total amount arrived at the time of Acceptance of contract.)

Construction of Soakage Well of size 1.20 m dia x 4.50 m effective depth,exc in ordinary soil,Foundation in PCC (1:3:6) Type C 2 (using 40 mm graded crushed stone aggregate),Wells of honey combed and solid in M-25 concrete,including intercepting chamber,screen chamber brick work in CM,RCC cover slab in M-25/RR masonry,filling with brick bats etc complete all as specified and as directed and as shown in drg no TD/309 amended upto date.

M/S CHAUHAN ELECTRIC WORKS

M/S MANSI TRADERS