SPL REPAIR TO BLDG NO P-102 (04X OTHER RANK MARRIED ACCN) AT LEBONG CANTT UNDER AGE (I) DARJEELING

Amount

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

S&F of pre-painted galvalume aluminum zinc coating GI based corrugated/ Semi-corrugated/Profile steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

S&F Pre-painted Galvalume Aluminium Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified complete all as specified and directed.

S&F of M S flat (40x3mm) w wind ties for roof including securing bolts cutting top to shape as directed including all necessary drilling, bolting or riveting or L type or J type or cranked hook bolts etc and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

Demolition of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed

S&F of anodised aluminium snap grid frame work of size of grid 605mm x 605mm for false ceiling, complete all as specified and directed.

M&L for 4mm thick non asbestos fibre cement building boards fixed or laid / inserted to timber / GI / aluminium framework with screws in ceiling flat or sloping, complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar (1:6) finished even and rough, complete all as specified and directed.

M&L for coloured non-skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.

M&L for coloured non-skid ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles , complete all as specified and directed.

M&L for coloured non-skid ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles on vertical surfaces such as skirtings, dados and risers to steps etc. complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar (1:3) on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing, complete all as specified and directed.

M&L for glazed ceramic colouered tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick as in vertical surface such as risers of steps, skirting, dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile , complete all as specified and directed.

M&L for coloured & polished chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigments, complete all as specified and directed.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

M&L for machine cut Kota stone slab flooring, 20 to 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing and exposed edges of Kota stone shall be rounded complete complete all as specified and directed.

M&L for machine cut Kota stone slab as in vertical surfaces such as dado/skirting, 20 to 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing and exposed edges of Kota stone shall be rounded complete complete all as specified and directed.

Taking down chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frame), complete all as specified and directed.

Taking down chowkats or frame not 1.5 sqm but n.exc 4 sqm with shutter (with out taking off shutter from frame) all as specified and removing from site and as directed.

Taking down shutters of any description n exc 1 sq. m each and removing to or from store, complete all as specified and directed.

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each, complete all as specified and directed.

S&F of second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

M&L for second class hard wood, 35mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and directed.

S&F of 35 mm thick (batten thickness) second class hard wood, glazed and Skelton shutters, open rebated and prepared to receive glass, gauge, etc , divided into squares, with plain chamfered or rounded, mitred and rebated sash bars, edges of framing plain, chamfered or rounded with cut mitred beds for securing glass etc, supplied and fitted to chowkhats complete all as specified and directed. Note: The dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I)

M&L for second class hard wood, 30mm thick glazed and skeleton windows shutters, ventilators shutters etc. are provided with stiles and rails, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24(b); supplied and fitted to chowkats, complete all as specified and directed.

S&F of solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing and as directed.

S&F of factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing and as directed.

S&F of Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. complete all as specified and directed.

S&F of 4.0mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and directed.

S&F of 4 mm thick figured glass, pin head type and glazing with oil putty in square not exc 0.50 sqm in each pane, complete all as specified and directed.

Hacking out old broken glass, exc 1.5 sqm (any thickness, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.

S&F of 3.0mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and directed.

S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples fixed, complete all as specified and directed.

S&F for 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L in repairs 18/19 mm thick ISI Marked termite proof, chemically weel pressed, prelaminated particle board for cupboard shutter, exterior grade, prelimated one sides with decorative choice lamination & other side balancing white lamination and fixed with screws to frame work for kitchen cabinetstand cub boards etc including teakwood lipping 6 mm thick fixed with nails, complete all as specified and directed.

M&L for second class hard wood plain fillets.area exc.13 and not exc. 25 Sqcm, square, rectangular or triangular in section, clean sawn, bull nosed, splayed, chamfered or rounded on one edge or face, secured with screws or brads/ nails, complete all as specified and directed.

S&F in repairs of continuous (piano) hinges mild steel bright finish or electro galvanised 30 mm width of flaps (when open), complete all as specified and directed.

S&F of 100mm size butt hinges, medium weight, cold rolled mild steel, and fixed, all as specified and directed.

S&F of 75mm size butt hinges, medium weight, cold rolled mild steel, and fixed, all as specified and directed.

S&F of 150 mm size aluminium handles, cast type, anodised, all as specified and directed.

S&F of 125 mm size aluminium handles, cast type, anodised, all as specified and directed.

S&F of 200mm long aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified and directed.

S&F of 125mm long aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified and directed.

S&F of 250 mm long aluminium alloy, anodised sliding door bolts with haps staple (bolt type), and fixing clips of sheet, cast or extruted sections and fixing bolt and sliding bolts of extruted sections or cast aluminium alloy and fixed in repairs, complete all as specified and directed.

M&L for plain cement concrete (1:3:6), type C-1 (using 20 mm graded crushed stone aggregate) as in bed blocks for grouting hold fasts, coping, filling in pressed steel chowkat or similar work including weathering, slightly rounded or chamfered angles and throating, including necessary form work, complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M&L for brickwork with fly ash bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in cement mortar(1:6), complete all as specified and directed.

M&L for brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar(1:4), complete all as specified and directed.

M&L for brick work with sub class 'B' bricks , using old size bricks, straight or curved on plan exc 6 m mean radius built in cement mortar (1:4), complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:6) on stone masonry surfaces or surfaces other than fair faces of brick work, rendering finished even and smooth (without using extra cement), complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:4) with water proofing compound @ 3% by weight of cement or in the manner specified by the manufacturer and in the proportions indicated on fair faces of stone masonry/ brick work or concrete surfaces, finished even and smooth (without using extra lime or cement), complete all as specified and directed. Note: Water proofing compound will be measured and paid

Supply only integral water proofing compond, all as specified and as directed.

M&L for 5mm thick rendering in cement mortar (1:3) on concrete surfaces in ceilings and finished even and smooth (without using extra lime or cement), complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls two coat of distemper oil emulsion (OBD), over a coat of priming coat (Chalk whiting, on plastered surfaces, preparatory to distempering) including 1mm thick wall care putty on wall, complete all as specified and directed.

M&L for complete removal of existing treatement on plastered or unplastered surfaces of walls including brooming down or steel wire brushing, scrapping down smoke scoot, mould, moss and efflorescent salt, trading oil and greasy spots and applying one coat of distemper oil emulsion (OBD), over a coat of priming coat (Chalk whiting, on plastered surfaces, preparatory to distempering) including 1mm thick wall care putty on wall, complete all as specified and directed.

Material & Labour for prepration of new plaster or unplaster surface applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.

Material & Labour for complete removal of existing treatment on plaster or unplaster surface applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of ceiling two coat of distemper oil emulsion (OBD), over a coat of priming coat (Chalk whiting, on plastered surfaces, preparatory to distempering) including 1mm thick wall care putty on wall, complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L for preparation of old wood or wood based surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Taking up or down old unserviceable 15 mm bore steel water tubing including all fittings and fisture from wall/ floor or tranches and connections, including cleaning for refixing or removal to store or from site, complete all as specified and directed.

Taking up or down old unserviceable 20 mm bore steel water tubing including all fittings and fisture from wall/ floor or tranches and connections, including cleaning for refixing or removal to store or from site, complete all as specified and directed.

S&F of 15 mm bore tubes 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

S&F of 20 mm bore tubes 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

Supplied and fixed in repair 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F in repair 20 mm bore dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms), all as specified and directed.

S&F for 15mm bore dia bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repair 15mm bore dia of pipe, brass CP mixer for mixing hot and cold water screwed down for iron pipe , complete all as specified and directed.

S&F in repair 15mm bore dia of pipe, brass CP mixer for mixing hot and cold water screwed down for iron pipe and fixed suitable for wash hand basin , complete all as specified and directed.

S&F in repair of 15mm bore dia stop valves, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F in repairs of vitreous china wash basin white of any pattern, flat back of size 450mmx300mm excluding taps, , chain and plug and procelain stopper but including ,suitable size of brackets and making good the damaged walls as per existing wall finish, complete all as specified and directed.

S&F in repair for 32 mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, all as specified and directed.

&F of 1mm thick stainless steel sink with drainage board kitchen or laboratory type with waste pipe, plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size of sink 915mm x 460mm and bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F of 40 mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, all as specified and directed.

S&F in repair for PVC connections 15mm size with PTMT nuts of length 450mm, all as specified and directed.

S&F in repair of towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms), complete all as specified and directed.

S&F in repair of soap dish, chromium plated fixed with chromium plated brass screws, approximate size 160mm x 160mm x 90mm, complete all as specified and directed.

M&L for 75 mm diameter (outlet) cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed.

M&L for 100mm diameter (outlet) cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed.

Dismantling water tanks of capacity exc 500 and n exc 1000 litres and removing to store, complete all as specified and directed.

S&F of rotational moulded polyethylene water storage tanks of capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-l and directed.

S&F for Vitreous china squatting pan, "Orrisa Pattern" size 580x 440 mm white with integral foot rests (excl flushing cistern and flush pipe) complete including provision of lime concrete bedding all as specified and directed.

S&F of 100mm bore of pipe ‘P’ or ‘S’ traps without vent horn, complete all as specified and directed.

S&F in repair of PVC low level flushing cistern 10 litre capacity, valveless syphonic action type complete with inlet, ball valve, float valve, bends brackets, rawl plug, brass screws handle etc complete having BIS description mark with IS:2731 with and including suitable size of MS brackets, plug, screw all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc, and making good the floors/walls as per existing floor finish/wall finish, complete all as specified and directed.

Supply only flush pipe of CP 32 mm dia for low level cistern all as specified and directed.

S&F in repair for 20mm dia curtain rails / harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc., complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thickness (below or above ground level), complete all as specified and directed.

M&L for 75 mm thick plain cement concrete(1:3:6), type C2 (40 mm graded stone aggregate) as in flooring, plinth protection, hard standing, path etc including finish the surface even and smooth with using extra cement, complete all as specified and directed.

M&L for plain cement concrete (1:4:8), type D2 (using 40 mm graded stone aggregates) as in foundation, filling and mass concrete, complete all as specified and directed.

M&L for 25mm thick plain cement concrete(1:2:4), type B-0, (using 12.5mm graded stone aggregate) as in sub-base, sub-floors, floors, pavings, roof treatment etc. and finishing the surface rough to receive screed bed, complete all as specified and directed.

M&L for plain cement concrete(1:3:6), type C-2 (40 mm graded stone aggregate) in surface channels and drains including all necessary form work, complete all as specified and directed.

M&L for plain cement concrete (1:2:4), type B-0 (using 12.5 mm graded stone aggregates) in coping, bed plates, parepet, plinth course including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not specifically provided for, complete all as specified and as directed.

M&L for providing precast cement concrete (1:2:4), type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs (for man holes, drain etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces with plain fair faces, including chamfers, weatherings, throating etc. and set in cement mortar (1:4), complete with joints to match the surface, complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) (1:2:4), type B1 (using 20 mm graded stone aggregate) as in chajjas and the like, complete all as specified and directed.

M&L for reinforced cement concrete M-25 (design mix) (using 20mm graded stone aggregate) in Slabs supported on walls, beams and columns ub floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like, complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), rough finished surfaces of concrete on flat surface, complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC / PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, rough finished surfaces of concrete on flat surface, complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

S&F of bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds mitered / stopped ends etc all as specified and as directed.

M&L for 100mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed.

M&L for 75 mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed. M&L for 75 mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed.

M&L for 75 mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed.

M&L for 100mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls, duly applied a coat of bitumenous black paint complete all as specified and directed.

M&L for 75 mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls, duly applied a coat of bitumenous black paint complete all as specified and directed.

M&L for 50 mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls, duly applied a coat of bitumenous black paint complete all as specified and directed.

S&F of 50mm bore dia cast iron cowls, complete all as specified and directed.

S&F of 100mm bore dia cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access doors, complete all as specified and directed.

S&F of 75 mm bore dia cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access doors, complete all as specified and directed.

S&F of 100 mm dia stack clamps out of 50mmx5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to ball or roof all as specified and directed.

S&F of 75 mm dia stack clamps out of 50mmx5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to ball or roof all as specified and directed.

S&F of 50 mm dia stack clamps out of 50mmx5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to ball or roof all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed.

S&F PVC (SWR) gutter drain pipe 180mm bore complete all as specified and directed.

S&F 180mm PVC (SWR) joint socket as in gutter drain pipe complete all as specified and directed.

S&F 180mm PVC (SWR) joint tee as in gutter drain pipe complete all as specified and directed.

S&F 180mm PVC (SWR) joint tee with end cap as in gutter drain pipe complete all as specified and directed.

S&F of 110mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.

S&F of 110mm bore PVC (SWR) bends any radius, complete all as specified and directed.

Excavatingin trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/ dense soil including forming bottom surface to required level or slope, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soil all as specified and directed.

Removal of surplus excavated soils to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.50m above the starting point, complete all as specified and directed.

M&L for 150mm internal diameter salt-glazed stoneware drain pipes laid in trenches and jointed all as specified and directed.

M&L for plain cement concrete (1:3:6) bed, type C-2 (using 40mm graded stone aggregate) to drain pipes 150mm bore including packing under, and haunching against the sides of pipes after they are laid and tested, complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. complete all as specified and directed.

Taking down DB's including MCB's etc., complete all as specified and directed.

Taking down carefully unserviceable sub main wiring of any size/core/type including making good the disturbed surfaces, complete all as specified and directed.

Taking down electric meter and deposited to MES store for safe custdy,, complete all as specified and directed.

M & L for refixing of Electric Meter with Board complete all as specified and directed.

M&L for Point wiring with 1.5 Aq.mm (nominal area) PVC Conduit insulated shathed single core multistranded copper conductor cable FRLSH 1100 volts grade (conforming to ISI drawn through and including rigid non metallic PVC conduit not less than 20mm dia (concealed) medium grade with all nessary fitting concealed wiring 1.5 Sq.mm PVC FRLSH insulated copper standed conductor for earth continuith conductor and connedted to earht dolly and to be terminated in 1.60 mm thick modular box including flush metal box 2/4/6/8/12 module with module inner and oute plate for mounting modular switch, socket outlet regulator etc with 3mm thick laminated blaekite sheet for housing switchs, sockets outler regulator etc. complete all as soecified and directed incuding testing on completion . [Note -(a) Proper colour coding of PVC insulated copper wire shoule be maintained as red/yellow/blue wires for phases, black wire for neutral and green wire for earth. (b) Two run of 1.5 Sq.mm for phase and netrual and one run of 1.5 Sq.mm for earth wire. (c) Conealed type in permanent bldg and surface type intemporary bldg or as directed. (d) Wiring shall be circit type & circuit for switch board shall be taken from DB.

One light/bell/buzzer point controlled by one, 1- way switch

One light point controlled by Two 2-way switches.

One socket outlet, 3 pin 5/6 Amps on same Board

One socket outlet, 3 pin 5/6 Amps, independent Board.

Two socket outlet, 3 pin 5/6 Amps, independent Board.

Ditto- All as per Item No. 137 (d) above but for socket outlet 15/16 Amps on independent board with 2.5 sqmm size cable for Phase, Neutral and Earth and size of cashing caping 25x20mm ISI marked complete.

M&L for modular switch one way 6/10 Amps, 1 module, 240 Volts, all as specified and directed.

M&L for modular switch two way 6 Amps, 1 module, 240 Volts, all as specified and directed.

M&L for modular bell push 6 Amps 1 module, 240 Volts, all as specified and directed.

M&L for modular socket, 6 Amps - 2/3 pin combined 2 module, 240 Volts, all as specified and directed.

M&L for modular socket, 6Amps / 16Amps - 2/3 pin combined 2 module, 240 Volts, all as specified and directed.

M&L for modular switch one way 16 Amps, 1 module, 240 Volts, all as specified and directed.

M&L for modular blank plate, 1 module, 240 Volts, all as specified and directed.

M&L for modular white cover plate with frame, 2 module, 240 Volts, all as specified and directed.

M&L for modular white cover plate with frame, 3 module, 240 Volts, all as specified and directed.

M&L for modular white cover plate with frame, 4 module, 240 Volts, all as specified and directed.

M&L for modular white cover plate with frame, 6 module, 240 Volts, all as specified and directed.

M&L for Buzzer, Ding Dong AC. 230 volts, single pole, all as specified and directed.

M & L for Ceiling rose, PVC/polycarbonate, insulated body, 3 terminals and 240 Volts ISI marked complete all as specified as directed.

Supply and fixing for lamp holder, PVC/Polycarbonate type with back plate suitable for batten/angular fitting complete including dismantling old one all as specified as directed.

S&F in repair wall mounted LED Tube light fitting 20 watt surface mounted general purpose LED Batten in Extruded Aluminium housing including making connections with 2 core flexible copper wire 0.50 sqmm from ceiling rose after fixing fitting in position at site on 02 Nos new PVC blocks complete all as specified and directed. Make-Havells Cat part No-CAT PT No LUMLINE PLUS NEOBS20WLED865SPCSSIND or equivalent to Bajaj/Philips/CG/Surya.

S&F in repair wall mounted LED Tube light fitting 10 watt surface mounted general purpose LED Batten in Extruded Aluminium housing including making connections with 2 core flexible copper wire 0.50 sqmm from ceiling rose after fixing fitting in position at site on 02 Nos new PVC blocks complete all as specified and directed. Make-Havells Cat part No-CAT PT No LUMLINE PLUS NEOBS10WLED865SPCSSIND or equivalent to Bajaj/Philips/CG/Surya.

S& F in repair of Decorative, wall mounting, brushed nickel finish fixture with opal glass diffuser/ acrylic diffuser suitable with 9 W LED lamp B22 base complete including dismantling old one and all as specified as directed. Make : Cat Part No LHFOAJE1Z1I060 of Havells or equivalent model of Philips/CG/Wipro/Surya/C&S

S&F in repair of Bed side light fittings white or black/ white in colour 7 watt, lumen output 400 lm/3000K minimum with inbuilt switches two nos complete incl suitable mounting box as approved complete all as specified and directed. Make : Cat Part No31437 of Philips or equivalent model of CG/Wipro/Havells/C&S/Surya

S&F in repair of LED surface mounted decorative Bulk Head fittings 10 watts duly fixed on suitable PVC/ wooden Box and connection complete all as specified and directed. Make : Cat Part No RUGBYGENXFTS10WLED865SSYMBOPC of Havells or equivalent model of Philips/CG/Wipro/Surya/C&S.

S&F in repair of bldg security light new generation energy saving & enviornmental friendly long life versatile pressure die-cast aluminium IP66 with high power LED as light source with acrylic cover of LED 30 Watt luminaire and suitable size of bracket, clamping with nut & fastener complete all as directed (Make- CAT Part No -ENDURASUNDOWNSL30WLED757PASYBOPC of Havells or equivalent to Surya/Philips/CG).

M&L for Sub main wiring alongwith earth wire of size 2x6 sqmm + 1x6 sqmm earth wire ISI marked FRLS PVC insulated multi stranded copper conductor, single core cable drawn in and including PVC cconduit suitable for concealed wiring, ISI marked as required as specified and as directed . Note:- (i) Two run of PVC wire and one run of earth wire, one run of cashing capping size 25x16mm will be measured as one length.

S&F in repair/replacement of MCB DB, TPN 4 way, 415 volts, Double door type with sheet metal enclouser suitable for mounting incoming and outgoing MCBs complete all as specified and directed.

S&F in repair/replacement of MCB DB, SPN 12 way, 240 volts, Double door type with sheet metal enclouser suitable for mounting incoming and outgoing MCBs complete all as specified and directed.

S&F in repair/replacement of MCB, Single Pole, 240 volts of capacity 6-32 Amps, 10 KA rupturing capacity complete all as specified and as directed.

S&F of MCB, SPN, 240 volts, AC, 50 Hz of capacity 40 to 63 Amps, 10 KA rupturing capacity complete all as specified and as directed.

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of triple pole and neutral(TPN) and current carrying capacity 100 Amps, in the DB complete with connection testing and commissioning, complete all as specified and directed.

Supplied & fixed for Single pole and netural enclosure box with a two pin and earth plug and socket complete with one single pole MCB of capicity 20 Amps type C10K , all as specified and directed.

Material and labour for earthing complete with galvanised steel earth plate electrode 60cm × 60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron or steel earth lead wire 4.0mm dia size by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES SSR Part-I, connected to earthing test point all as specified or indicated including testing on completion, including necessary excavation and earth work in any type of soil, GI pipe 20mm dia light grade for watering and GI 15mm dia light grade pipe for protection of earth wire upto DB / test point from earth plate etc., PCC chamber with PCC cover in cement concrete (1:2:4), type B1 (using 20mm graded stone aggregate), funnel, wire mesh, charcoal dust, salt etc, connected to DB as indicated, complete all as specified and as directed. Notes: Contractor should conduct necessary test such as earth continuity, earth resistance test in presence of Engineer-in-Charge.

Supply and laying in trenches, fixed to wall / pole XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, 3.5 core, cross-sectional area 25 sq.mm, including dismantalling of old service connection etc complete all as specified and directed.

M&L for 40mm dia steel tubes (light grade) galvanised with all fittings, laid in trenches/wall/pole/road crossing for protection of underground cable/ earth strip, all as specified and directed.

Supply and laying in tranches, fixed to wall/pole DWC pipe (Double wall corrugated) of dia 150 mm for Carrying UG cable or as and where directed complete all as specified and directed.

M & L for indoor/ outdoor cable end terminal joint (epoxy type) complete suitable for aluminium conductor cable cross section area 25 Sq.mm , 3.5 core , 1100 volt grade complete all as specified and directed.

Taking down 25mm bore steel tubing and connections with all fittings including cleaning for refixing or removal from site all as specified and directed.

Supply and laying GI steel steel water tubing medium grade ISI Marked of size 25 mm bore laid in tranches /wall incuding all fittiing all as specified and directed.

S&F Gun-metal, globe or gate valves, ISI marked, 25mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed

Note 1:- (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum / amendments and general condition of contracts before entry / quoting the rates. Note 2:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount.

HIRA SINGH (BID ID -3460370)

Darjeeling Enterprises (BID ID -3462352)

SANJAY KAUSHIK (BID ID -3464152)

RAI CONSTRUCTION (BID ID -3462931)

JALAPAHAR HARDWARE (BID ID -3463841)

THUKKEPA & PANGDOK (BID ID -3464236)

BHASKAR PRADHAN (BID ID -3462393)