Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.2 Cr
EMD Value
₹2 L
Closing Date
17 Jan 2026, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Hubballi Dharwad Urban Development Authority
R G Patil
Development of Nagashettikoppa Lake C.T.S No 2430 Area 01A-18G at Hubli in HDUDA Limits
HDUDA/2025-26/OW/WORK_INDENT57
HDUDA/2025-26/OW/WORK_INDENT57
Open
Other Works
Two Tender Document System(Two Cover)
HDUDA Commissioner Office Dharwad
15 documents required · 15 mandatory
Valid contractor license certificate issued from competent authority PWD Contractor Class 2 and Above
Line of Credit amount obtained from Nationalized / Scheduled Banks in Given Pro-forma in the bid document (Rs 37.27 lakhs)
Financial Turnover certificate obtained and certified by the Registered Valid Chartered Accountant indicating the Registration no of chartered accountant with UDIN Number Details (achieved in at least two financial years a minimum annual financial turnover of Rs 248.53 Lakhs) (Excluding GST)
profit and loss statement in the name of the participating bidder
ITR Returns filed Copy in the name of the participating bidder
balance sheet tallying the Annual Turn Over during the previous five years in the name of the participating bidder
Work Done Certificates for the Work performed as Prime Contractor (in the same name) on works of similar nature during the five years specified (Satisfactory completed, at least one Similar nature of Lake development Work value not less than Rs. 62.13 Lakhs (Excluding GST)
The Work Done Certificates for the Quantities of work executed as prime contractor in the same name during the last five years specified along with the details in the format as in the bid document. Earth work excavation/ Embankment 2762.94 Cum, PCC/RCC 290.87 Cum, TMT Reinforcement Steel 16.74 MT, Stainless Steel Handrail/M S Structural Steel Work 5731.44 Kg,
Valid PAN Card of the Participating Bidder
Valid GST Registration Certificate
The Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender. (A) Existing commitments and on-going works: along with the details in the format as in the bid document
The Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender. (B) Works for which Tenders already submitted: along with the details in the format as in the bid document
Signed Copy by the Participating Agency on the Letter head containing the Address and Contact Details indication Contact Person & Designation, Contact Number Office Landline / Mobile, and valid email ID.
Notary Self Attestation regarding Agreed to Terms and Conditions as per (bid document) kw4 on face value of Stamp Paper not less than Rs 500
Notary Affidavit Declaration that the bidder has not been blacklisted on Stamp paper of Face Value not less than Rs 500
₹3,110
₹2 L
17 Dec 2025
17 Dec 2025
19 Jan 2026
7 Jan 2026
9 Jan 2026
Development of Nagashettikoppa Lake C.T.S No 2430 Area 01A-18G at Hubli in HDUDA Limits
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out...
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Providing and Filling in foundation with granite/trap broken metal of 100 MM and down size, with approved sand including hand packing, ramming, watering, including cost of all materials and labour wit...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Code...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
Loading and Unloading of Stone Boulder/Stone aggregates / Sand / Kankar / Moorum. (Tipper 10 m3)
Providing & fixing 20 mm thick compressible fibre board in expansion joint complete as per drawing & Technical Specification.
Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than...
Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation,...
Providing M-Sand : Supplying and filling in plinth, foundations / UG cable work with approved M-sand including watering, ramming, consolidating and dressing. The rate includes the cost of material, la...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Repairs to Machinehole for different depths including removal of debris, levelling the brick masonry, construction of brick masonry upto Ground level, providing CC coping alround the MH cover, plaster...
Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
Providing new embankment to slopes of the existing bund to strength the existing bund using soil from approved borrow area in layers of 200 to 250 mm and compacting each layer manually to meet require...
Providing and constructing 450 mm thick hand packed rough stone revetment consisting of 300 mm thick rough stones with 400 to 450 mm long through stones at 1.5 m c / c over a backing of 150 mm thick 4...
Providing and placing sand bags consisting of empty cement bags filled with 35 to 40 kg locally available sand for forming ring bund including cost of all materials, labour, plugging joints with selec...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of ...
Providing Water based glossy paint (Green certified product) to Kerb Stones as per IS 164:2015 technical specifications including cleaning & surface preparation.
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and laying flooring with burnt stone slabs 10 cms thick rough chistle dressed on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3, , including cost of materials, mortar...
Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid...
Providing and laying surface mount Reinforced Cement Concrete (RCC) benches, M-30 grade concrete Typically involves steel reinforcement bars (10mm TMT bars, 4mm MS bars) to enhance tensile strength. C...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
Fabricating, supplying and erection of . ms long hot dip Galvanized Conical hot dip Pole with BSEN 10025 grade S355JO steel plate for shaft, IS2062 for base plate with dooropening arrangements, includ...
Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuserwith Injection moulded polyca...
Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Single Arm Bracket with 1000 mm Stand...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 25 Sqmm...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden /Aluminum Rollers as directed by the departmental staff - LT Cable - 2.5 to 25 Sqmm
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW 4 Nagashettikoppa Lake INDENT57.doc
Tender Document • 3.04 MB
Nagashettikoppa.pdf
Others - Technical Sanction • 2.61 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .