8804PROVISION OF CERTAIN WORK SERVICES FOR AGNIVEER SHED FOR WASHING BAY IN AF STATION JALAHALLI WEST AREA AND CHAIN LINK FENCHING FOR ECHS IN TUMKUR UNDER GE M AF STATION JALAHALLI BANGALORE

Amount

SCHEDULE 'A' PART I B&R WORKS Supply and fixing of Powdercoated aluminium frame work for partition with one or more rebates incl Joining cleats,hooks, hangers, beadings, rubber gaskets etc, powder coating minimum thickness of powder coating 50 micron and fixed in position for making bed curtains all as per direction of Engr in Charge

Supply and fixing using prelaminated particle board of 18/19mm thick one side decorative face of exterior grade as in cup board shutters, shelves and as in partition all as specified and directed

Supply and fixing 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed

Supply and fixing Butt hinges, medium weight coldrolled mild steel and fixed 100mm size.

Supply and fixing aluminum anoldised handle 150 mm long.

Supply and fixing of Harrison curtain rails, anodised aluminum body with fixing brackets, stops, rollers etc

Supply and fixing 5.50mm thick looking mirror of selcected quality glass mounted on 12mm thick BWR phenol bonded ply back with PVC beading allround frame fixed to wooden plug with chromium plated brass screw & cup washer complete all as specified and as directed

Supply and fixing 8 feet 4 pipes pulley operatoed cloths drying system consisting of aluminium pipe of outer dia 22mm, inner dia 19.80mm, made up of detrin with rope guide mounted on channel pair of lemgth 24 feet (distance between two pipes is adjustable) locking system to hide rope knot, channel to be mounted or fixed with self taping screws provided in kit. Rope will be HDPE double core of 4mm dia fixing to ceiling as specified and directed by Engr-in-Charge and minimum weight of one pipe shall not be less than 0.20kg, minimum weight of rope shall not be less than 7700Gms/unit (for 04 pipes) complete all as specified and as directed .

Material and labour for Providing precast cement concrete louvres and jallies, 35mm thick (measured solid), faces are finished smooth including all mouldings set in CM 1:4, type B0 1:2:4

Material and labour pre-cast PCC 1:3:6 type C1 (20 mm graded agg) cement concrete block masonry with solid blocks exc. 10cm in width and set in cement mortar 1:6 complete all as specified and as directed .

Material and labour for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces on external surfaces finished even and smooth without using extra cement complete all as specified and as directed

Material and labour for treating with three coats of whitewash on new surfaes of walls incl necc preparation to give uniform and smooth finish all as specified.

Supply and fixing in Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified and directed

Supply and fixing Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms) complete all as specified and as directed.

Supply and fixing Three sink unit : Over all dimension is 3.0 M x 0.70 M x 0.85 M .(118" x 27.5" x 33.5")* Top - 16 SWG 304 SS with bottom 32x32x3mm SS angle frame & 1½" double beaded all sides. * Single Sink Bowl size - 16 SWG 0.75M (29.5") X 0.46(18") MX 0.46(18")" with drain coupling.* Legs - 16 SWG 304 SS 38x38mm pipe legs with adjustable nylon bush * cross support - 1" square pipe * Swan Neck tap- 3Nos Make: Jaguar, JAL or equivalent,(including all inlet and out pipes as directed by Engr -in-charge)

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with erth ground, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50m and making good surface and all as specified and directed.

Excavating in post holes in sof/ loose soil (or similar holes) each n exc 0.5 cu m getting out, and removing surplus soil to a distance n exc 50 m and all as specified and as directed

Material and labour Cement Concrete 1:2:4 type B-2 (using 40 mm graded crushed stone agg as in foundation filling or for mass concrete complete all as specified and directed.

Material and labour for Cement concrete 1:3:6 type C2 (using 40 mm graded stone agg) as in foundation filling and for mass concrete and all as specified and directed.

Material and labour for Cement concrete type D2 1:4:8(using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

Supply and fixing Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. including necessary cutting, drilling, welding etc and bending to swan neck shape as required and drilling holes notching for wires etc conforming to Fe-410- W(Gde- E-250) quality- B complete all as specified and directed.

Supply only of chain link fencing MS galvanised sqaure wire mesh of size 50mm X 50mm, dia of wire 4mm including line wires, to any type of standard rails, straining bolts, etc all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc inlcuding provision of binding wire etc all as specified and directed.

Supply and fixing Flat iron welded or jointed in connection with framed work including securing bolts and all necessary drilling, bolting or reverting and similar work conforming to Fe-410-0 complete all as specified.

Supply and fixing ms round bars 10 mm dia and over Fe 290 (Gde - E-165)cut to length bent to shape required including cranking, bending spirally, hooping for columns, hooking ends and all as specified and directed by EIC.

Supply and fixing Mild steel screw bolts (machine made) dia of neck 16 to 20mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long

Supply and fixing framed work as in doors or gates of angle,tubes or other section with gusset plates, rails, braces,guard bar etc., complete, to be prepared for hanging or sliding with and including hinges or steel hanging door fittings (exclusive of steel sheeting or other covering) and hanging; also fastening and fixing Fe 410 -W (Gde- E- 250) quality-A complete

M & L Providing two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces over 10 cm width or girth including preparation of new steel surfaces and all as specified and directed.

Supply and fixing Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed

Supply and fixing MS Steel work in tubular trusses including special shaped washer etc. complete using induction butt welded tubes conforming to I. S.11611979 grade St.-240

Supply and fixing Rolled sections as in main and cross beams, Post ,hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle leats or other connecting plates , Fe-410-W(Gde-E-250)quality A

Material and labour for 0.50mm thick Pre painted Galvalum aluminium zinc coating GI based corrugated steel sheet AZ 150 of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall ,including ridges fixed with self tapping screws as specified.

SCHEDULE 'A' PART II E&M WORKS Supply and fixing for surface conduit Point wiring with 1.5 Sq mm multistranded copper conductor FRLS PVC insulated and unsheathed cable ISI Marked & drawing in and including non-metallic PVC conduit 20 mm bore medium grade & ISI marked on walls/ceilings/steel frame structure (with necessary arrangement as required at site) including cutting chasing for wiring , pinning in making good & finishing of disturbed surfaces,white wash matching with the existing surface colour & including all conduit fittings, clamps, gutties etc. for one light/fan point controlled by one switch or one fan point controlled by one switch and regulator each including provision of new modular pvc box suitable as per fitting and fixture as per requirment at site not less then 1.6 mm thick; with provision of all connected modular fitting and fixture of and PVC insulated stranded copper continuous earth wire 1.5 Sqmm size FRLS to common earth and connecting to earth dolly, complete all as specified and directed. (Switch/socket, regulators shall be measured & paid for separately). Note- All the wires will be used with approved colour coding and as directed by Engr in-charge.

All as per item 33 above but for 3 pin socket outlet 5 amp independent but not below the main board In the same vertical plane complete all as specified.

All as per item 33.00 above but for 3 pin socket outlet 5 amp on the same board contraolled by separate switch complete all as specified.

All as per item 33.0 above but with 2.5 sqmm copper conductor for 15 amp switch socket outlet combination n1. including 1.5 sqmm copper earth wire complete all as specified..

Supply and fixing ceiling rose surface bakelite 3 terminals 65 x 50mm

Supply and fixing modular type switch 6 Amps, one way complete all as specified.

Supply and fixing modular type switch 16 Amps, one way complete all as specified.

Supply and fixing Modular Type Socket, 6A - 2/3 pin combined 2 module,complete all as specified.

Supply and fixing Modular Type Socket, 6/16A - 2/3 pin combined 2 module, complete all as specified.

Supply and fixing the White cover plate with frame 6 Module complete all as specified and directed all as specified and directed by Engr-in-charge.

Supply and fixing the White cover plate with frame 8 Module complete all as specified

Supply and fixing white cover plate with frame 1 module

Supply and fixing white cover plate with frame 3 module

Supply and fixing the Incinerator suitable for the Sanitary Napkin Incinerator disposes napkins in an environment friendly method by burning the pads and converting it into ash. HLL Sanitary Napkin Incinerator is designed to ensure easy and safe disposal of napkins complete all as specified with following specification :- 1 Type Wall Mountable 2 Capacity per cycle 15-20 pads per cycle 3 Capacity per day 200 pads per day 4 Cycle Time 45 min - 1 hr 5 Mode of operation Automatic 6 Housing-External CRCA Steel of 1.2 MM Thickness 7 Housing Internal Insulated type 8 Dimensions External i) Width 270 mm ii) Depth 250 mm iii) Height 600 mm 9 Insulation Thermal Ceramic Sheet with Glass wool of 5mm thickness 10 Voltage 220V 11 Amp 6 A max 12 Wattage 1250 W 13 Power Saver Auto Cut off 14 Emission Outlet Yes 15 Residue Ash Less Than 1 gm. per total burning of napkin 16 Temperature Cut-off Present with LED Display 17 Equipment ON indicator Yes 18 Housing Mild Steel Powder Coated 19 Coating Inside SS covering for maximum lifetime, Outside epoxy powder coating. 20 Start Option Auto start option is available: Just start and forget 21 Door Design Thermal Ceramic Insulated i) Door dimension 140 x 120 mm 22 Heater Ceramic Heater i) Heater Wattage 1200 W 23 Length of power chord 2.5 mtrs (Has ISI mark) 24 Flue gas pipe Yes with 2 Mtrs length (Flexible pipe) 25 Type of connection of pipe with flue gas outlet Clamp type 26 Temperature Indicator Settable 27 Safety MCB Yes, 6 Amp 28 Emission Standards Complete burning of napkins only less than 1 g ash per napkin is generated. The exhaust gas meets the Municipal solid waste management rules 2016/CPCB guidelines. 29 Ash collection tray Yes,tray is easily open able and disposable.

Supply and fixing LED flood light 300 watt 230 V AC outdoor type, IP66, energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium body for highlighting architectural façade and general purpose lighting. Make -Havells, Cat Pt No-JETAIRISMAXFL180WLED857PWBLTG or equivalent in CG /Bajaj/Polycab.

Supply and fixing wall mounting LED Study lamp swing type with and including LED bulb GU10. Make IKEA

Material and labour for wiring for circuit /sub main wiring with earth wire of size 2x 4.0sqmm + 1 x 4.0 sqmm of FRLS, PVC insulated copper conductor, single core cable in recessed , drawing in and including rigid PVC cunduit concelled complete all as specified and as directed.

Material and labour for wiring for circuit /sub main wiring with earth wire of size 2x 2.5 sqmm + 1 x 2.5 sqmm of FRLS, PVC insulated copper conductor, single core cable in recessed , drawing in and including rigid PVC cunduit concelled complete all as specified and as directed.

Material and labour in replacement of cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nut, bolts, washers, welding, bending cold or hot, drilling holes for bolts in any shape or as size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and as directed.

Material and labour Earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of plate not less than 1.5 m below ground level connected to and including galvanised earth strip of size 25x4 mm (up or 7.5 mtr length) and GI pipe 40 mm light grade for protection of GI earth strip by means of bolts, nuts, checknuts and washers made out of galvanised iron and connected to earth test point as shown in electrical plate No. 3 of SSR Part-1-2009 and as specified or indicated and testing on completion including excavation and earth work any in type of strata available at site, PCC (1:3:6) type C-1 for earth chamber, precast RCC slab 50mm thick in cement concrete (1:2:4) type B-1 reinforced with welded steel wire fabric (xpm) weight not less the (4kg/sqm) funnel with GI watering pipe of 20 mm bore medium grade, wire nuts and lugs including taking down old u/s one complete all as specified and as directed.

OM ENTERPRISES

chowdeshwariconstructionco

manoj builders and consultants

Maruthi constructions