Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.7 LAccepted-AOC 12 NO 12 IRATTAI PILLAYAR KOVIL STREET NEAR REAL VALUE FLAT VELACHERY 733 CHENNAI TAMIL NADU 600042 | CHENNAI | TAMIL NADU | 600042 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹37.5 L+₹3.5 L (10.3%)Rejected-Finance H NO 190 S 4 CHODANKAR RESIDENCY NEAR GANPATI TEMPLE CENTRAL HORTA AQUEM BAIXO NAVELIM SALCETE GOA 403707 | SOUTH GOA | GOA | 403707 | L2 | Rejected-Finance Not being L1 |
Tender Value
₹39.0 L
EMD Value
₹77,960
Closing Date
5 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAJI
GARRISON ENGINEER OPPOSITE KALA ACADEMY ST INEZ ROAD PANAJI GOA 403001
SPL REP TO BLDG NO P 16 OF 429 ASC SUP TYPE A MARGAO GOA
2024_MES_636884_2
8136/E8
Open Tender
Civil Works
Item Rate
180 days
GE PANAJI
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GARRISON ENGINEER PANAJI
₹77,960
Yes
29 Apr 2024
13 Feb 2024
7 Mar 2024
13 Feb 2024
5 Mar 2024
20 Feb 2024
13 Feb 2024 - 16 Feb 2024
Amount
Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.
Material and Labour for 75 mm thick cement concrete1:3:6 (type C2) using 40 mm graded stone aggregate finished even & smooth without using extra cement as in plinth protection including Grade 'B' Bitumen filling in joints etc. complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (But not backing) and disposing off the rubbish materials complete all as specified and directed.
Material and Labour for coloured non skid ceramic tile 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match,including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
Material and Labour for glazed tile 300mm x 200mm x 6-7mm on vertical surfaces, such as skirting, dado etc set & jointed in neat cement slurry and pointed in coloured cement to match over 10mm thick plastering in CM 1:4 as a backing coat complete all as specified and directed.
Dismantling of stone slabs of any description or thickness in floors apron etc. bedded and pointed in any mortar complete all as specified and directed.
Material and Labour for machine cut kota stone slab flooring, stair case, landings 20-25mm thick over cement screed bed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and 20mm thick screed bed in CM 1:6 complete all as specified and directed.
Material and Labour for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing type including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
Material and Labour for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment including 15mm thick screed bedding of CM 1:4 complete all as specified and directed.
Taking down cement or cement lime plaster of any description from stone/brick or concrete surface of wall/ceiling etc including racking out joints hacking for key scrubbing down with water complete all as specified and directed.
Material and Labour for rendering 15mm thick in CM 1:4 on fair faces of stone surfaces with using WPC & finished even and smooth without using extra cement complete all as specified and directed. Note :-WPC will be measured and paid separately as per manufacturer's instructions
Material and Labour for rendering 15mm thick in CM 1:6 on fair faces of stone surfaces finished even and smooth without using extra cement complete all as specified and directed.
Material and Labour for 10 mm thick plastering in cement mortar 1:3 finished even and smooth without using extra cement on ceiling, soffit of chajja and roof projection or other similar work etc complete all as specified and directed.
Material and labour for applying two coats of damp proof paint over a coat of weather proof exterior primer including preparation of new surfaces of walls (Including 3mm wall care putty) complete all as specified and directed.
Material and labour for applying two coats of damp proof exterior paint over a coat of exterior primer including complete removal of existing treatment from old wall surfaces plastered /concrete surfaces of walls(Including 3mm wall care putty),cleaning with water etc. complete all as specified and directed.
Material and Labour for preparing newly plastered or unplastered concrete wall surface and applying two coat of oil emulsion distemper white or tinted including chalk whiting on wall preparatory to distemper and rubbed with abrasive paper and dusted (Including 3mm wall care putty) complete all as specified and directed.
Material and Labour for complete removal and preparing old plastered or unplastered wall or concrete surface and applying two coat of oil emulsion distemper white or tinted over a coat of chalk whiting on wall (Including 3mm wall care putty) complete all as specified and directed.
Material and Labour for preparing newly plastered surface of ceiling & applying three coat of white wash complete all as specified and directed.
Material and labour for applying two coat of white wash on old treated surfaces of ceiling including preparation of surfaces complete all as specified and directed.
Taking down chowkhat with shutter (Without taking off shutters from the frames) not exceeding 1.5 Sqm each complete all as specified and directed.
Taking down chowkhat with shutter (Wihtout taking off shutters from the frame) exceeding 1.5 Sqm not exceeding 4 sqm each complete all as specified and directed.
Supply and fix second class hard wood kiln seasoned chemically treated plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
Supply and fix 35mm thick Factory made Flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides Make:- kitply, Green wood, century ply complete all as specified and directed.
Supply and fix 35mm thick, 2nd class hardwood kiln seasoned, chemically treated, rail and style factory made plain framed, paneled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
Supply and fix second class hard wood factory made glazed and skeleton window shutters 30mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares with plain, chamfered or rounded mitred and rebated sash bars any number & fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I Section 8 clause 8.24 complete all as specified and directed.
Material and labour for treating ends of posts, back of chowkhats, etc, with tar or coal tar black paint, area of tarred exceeding 0.10Sqm but not exceeding 0.50sqm each including preparation of surface complete all as specified and directed
Material and labour for treating small articles such as hold fasts, ends of posts, backs of chowkhats, etc, with tar or coal tar black paint, area of tarred not exceeding 0.10 Sqm each including preparation of surface complete all as specified and directed
Supply & fix in repair Aluminium wire mesh 0.45 mm nominal dia of wire and width of aperture 40mm & fixed with aluminium wire staple complete all as specified and directed.
Supply and fix solid PVC door frames of size 50mm x 47 mm made out of 5 mm thick plain/printed coloured PVC sheet reinforced with MS square tube complete all as specified and directed.
Supply and fix factory made solid panel PVC door shutter 30mm thick (styles) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading & jointed together with solvent cement complete all as specified and directed.
Material and labour for priming to reinforcement bars with coat of nitco zinc primer or equivalent as FORSOC or equivalent as approved by GE for old and new reinforcement any height (dia of bars 8mm to 20mm) complete all as specified and directed.
Material and labour for applying bond coat (epoxy based) using brush and applying Polymer concrete (not less than 20mm thick)in the proportion of 1:3:1 (one part of cement,3 part of coarse sand and 1 part of 10 mm and down stone aggregate) using 8-10 kg of acrylic basic polymer per 50 kg bag of cement,all as per manufacturers instructions(any height) complete all as specified and directed.
Supply and Fix stainless steel hinge size 75 mm complete all as specified and directed.
Supply and Fix stainless steel butt hinge, size 100 mm complete all as specified and directed.
Supply and Fix aluminium anodized barrel tower bolt 100 mm extruded section complete all as specified and directed.
Supply and Fix aluminium anodized barrel tower bolt 150 mm extruded section complete all as specified and directed.
Supply and Fix extruded aluminium alloy handle fabricated type 150 mm complete all as specified and directed.
Supply and Fix extruded aluminium alloy handle fabricated type 100 mm complete all as specified and directed.
Supply and Fix aluminium alloy , anodized , sliding door bolt with hasp , staple (bolt type ) & fixing clips of sheet , cast or extruded section & fixing bolt & sliding bolt of extruded section or cast aluminium alloy & fixing .250 mm size complete all as specified and directed.
Hacking out old broken glass of any thickness from steel ventilators/windows etc and fixed to 3mm thick figured glass pin head type and glazing oil putty in squares not exceeding 0.5 sqm in each pan complete all as specified and directed.
Supply and Fix hasp and staple, safety type ,aluminium anodised with hinges including bolt to hinges plate and fixes with screws. , wire type, stove enamelled black, including bolt to hinge plate and fixed with screws size 125 mm complete all as specified and directed.
Cutting holes in brick walls built in cement mortar for inserting hold fasts depth of embedded portion of hold fast n.exc half brick and making good the dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 complete all as specified and directed.
Supply and Fix figured glass 4 mm thick pin head type and glazing with putty exceeding 0.5 sqm in each pane complete all as specified and directed.
Material and Labour for preparing new wooden surface & applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
Material and Labour for preparing old wooden surface & applying one coat of synthetic enamel paint complete all as specified and directed.
Material and Labour for preparing old steel surface & applying one coat of synthetic enamel paint complete all as specified and directed.
Supply and Fix 150mm bore, PVC (SWR) pipes fixed in repair single socketed , in any length, with rubber ring joints, in any position complete all as specified and directed.
Supply and Fix PVC (SWR) bends/shoes with necessary fittings for 150mm bore pipe, any radius jointed with solvent cement complete all as specified and directed.
Material and Labour for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.
Material and labour for cement concrete 1:2:4 (type B0) using 12.5mm graded stone aggregate) as in floors, roofs, kerbs, beam, and coping and fixing of hold fast etc complete all as specified and directed.
Material and labour for RCC M15 (Nominal Mix), type B1 using 20 mm nominal size graded crushed stone aggregate as in beams and columns, chajjas, etc complete all as specified and as directed.
Material and labour for form work to rough finished surfaces of concrete as in foundations, footings, beams, columns, shelves, chajja etc complete all as specified and directed.
Material and labour for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips and including welding has to be done with minimum 20cm over lap for new and old of any height complete all as specified and directed.
All as per Item No. 53 above but for 5 to10mm dia of bars as in stirrups, spacers and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Demolition of brick work or laterite stone masonary built in cement mortar including precast concrete articles complete all as specified and directed.
Material and labour for brick work with fly ash bricks,straight or curved on plan exceeding 6m mean radius built in 1:4 cement mortar complete all as specified and directed.
Material and labour for cement concrete 1:2:4 (type E2) using 40mm graded stone aggregate in foundations, filling and mass concrete, ramp, stair case etc complete all as specified and directed.
Remove the rust from reinforcement completely by rubbing with wire brush or sand paper and applying rust removing chemical such as “Deruster” by approved make Reebaktens RR Fosroc or Equivalent As approved and removing non metal complex compound formed due to corrosion of rust (Any height) complete all as specified and directed.
Material and labour for crack repairs (crack width MORE THAN 5 mm) in block masonry walls using injection grout composed of low viscous epoxy resin and amine hardener Dr. Fixit/ Fosroc/ STP/ Sika by drilling and inserting injection nipples/ nozzles at interval along the cracks as per manufacturer's instruction complete all as specified and as directed.
Mixing and applying SBR latex modified cement mortar 25 mm thick in cement sand mortar in proportions of 1:3 (1 cement and 2 graded quartz aggregate) with polymer admixed in proportions as approved, including trowelling with wooden tools on prepared concrete surfaces of parent material complete all as specified and as directed Note: Acrylic polymer will be paid separately
Supply only approved SBR latex from FOSROC/BASF/DR FIXIT/ SIKA for SBR latex modified cement mortar complete all as specified and directed. Note: Rate will be in terms of solid contents of polymer
Supply only welded steel fabric weight not exceeding 4kg/Sqm complete all as specified and directed.
Supply only Integral Water proofing compound complete all as specified and directed.
Supply & Fix in repair brass cast copper alloy CP Shower rose 125mm size with shower Arm 15mm size 195 mm long with bend or without swivel joints complete all as specified and directed.
Supply and fix in repairs PVC flushing cistern 10 ltr capacity high level with inlet ball valve float chain and pull and brackets and flush pipe 32mm dia PVC pipe complete all as specified and directed.
Supply and fix in repairs in Vitreous China wash basin, white oval type size 600x480mm white, including pillar tapes, , waste coupling , waste pipe, porcelain stopper, brackets and embedded complete all as specified and directed.
S & F for repairs in Vitreous china, squatting pan orrisa pattern water closet of size 580x440 mm wide with integral foot rest including CI Connectors etc complete all as specified and directed.
Supply and fix sinks made of stainless steel 1 mm thick kitchen or lavatory with plugs, washers and wastes; incl beeding in CM on wall including fixing cantilever brackets and connecting union to pipe, overall size 495x420mm bowl size 410x330x160mm including waste fitting brass CP 40 mm with long shanks and fly nuts and waste pipe 32 mm dia including 15 mm dia fancy type chromium plated bib taps complete all as specified and directed.
Supply and fix in repairs fancy type chromium plated stop valve/cock cast copper alley, with long sunk cup ( concealed type) screwed down high pressure, screwed both ends for iron pipe or for under suitable for 15mm bore pipe complete all as specified and directed.
Supply and fix in repair fancy type 15 mm dia Bib taps, cast copper alloy with chromium plated screwed down , screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
Supply and fix in repairs PVC Connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.
Taking up or down for 15 mm dia bore of steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.
All as per item No 74 above but for 20 mm dia bore of steel tubing
All as per item No 74 above but for 25 to 32mm dia bore of steel tubing
Supplying & laying CPVC water tubing outer dia 16mm, SDR-11 grade with all fittings and fixed complete to walls and ceiling or laid in floors.including fitting also complete all as specified and directed.
All as per item No 77 above but for 20 mm dia bore of steel tubing including fitting also
All as per item No 77 above but for 25 mm dia bore of steel tubing including fitting also
Dismantling existing water tanks exceeding 250 ltr but not exceeding 500 ltr capacity complete all as specified and directed.
Supply and fixing four layer polyethylene water storage tank of capacity 1000ltr (cylindrical vertical with closed top), hoisted and fixed in position and inlet or outlet connection 25mm complete all as specified and directed.
Supply and fix in repairs in 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed with water tank inlet pipe complete all as specified and directed.
Supply and fix in repairs in 15 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed with water tank inlet pipe complete all as specified and directed.
Supply and fix powder coated aluminium grills DG 104 of Deco Grill/ hindal 10mm thick diamond shape with aperture 7.5cm for window openings fixed with powder coated aluminium ‘F’ frame complete all as specified and directed.
Taking down carefully copper/aluminium point wiring of light, fan, socket 5/15A or power point complete including fittings such as switches, bell push,electric bell,ceiling rose, pendant, regulator, socket, lamp holders, brackets, lamp fittings, etc including switch boards and making good disturbed surfaces of wall/ceiling etc so as to match with the existing wall/ceiling/floors etc complete all as specified and directed.
Taking down carefully sub main wiring including aluminium conductor size 2 x 4 sqmm / GI earth continuity conductor and making good disturbed surface complete all as specified and directed.
Dismantling old Main Board with MCBs and energy meters of any size and capacity alongwith teakwood boards & energy meter keep in safe at MES store for refixing complete all as specified and directed.
Fixing only and connecting electric meters along with teak wood boards upto 25 amps complete all as specified and directed.
Material and labour for sub main wiring with FR PVC insulated 1100 Volt Grade stranded copper conductor cable with one run of 4.00 Sqmm copper earth wire including all necessary connections and fixing arrangements complete of size 2X 4 Sqmm in concealed in wall/Ceiling through PVC conduit complete all as specified and directed..
Material and labour for concealed point wiring complete with 1100V grade 1.50 Sqmm PVC insulated unsheathed multistranded copper conductor cable drawn through PVC conduit concealed in wall including cutting of walls/ceiling etc for mounting modular switch/socket/regulator etc completely including 1.5 sqm PVC insulated copper earth continuity wire and connecting to common earth and carrying out IR test for each circuit complete all as specified and directed. for the following:
(a) One light point controlled by one way switch.
(b) One fan point controlled by one way switch and one regulator.
( c) One Exhaust fan point controlled by one way switch.
(d) One bell point controlled by one bell push.
(e) One 3 pin switch socket outlet 5A on independent board.
(f) One 3 pin socket outlet 5A on same board with other switch
( g ) two way light point
All as per item No. 91 above but with cable size 2.5 sqmm for switch socket outlet point 15A on independent board including 2.5 sqmm PVC insulated copper earth continuity conductor to common earth and carrying out IR test.
Supply and Fix bell push, flush type single pole, one way 5 Amp complete all as specified and directed.
Supply and Fix switch socket combination 2 in 1,3 pin 5 Amp white finish complete all as specified and directed.
Material and Labour for socket outlet 5 pin, 5 Amps flush type white finish complete all as specified and directed.
Supply and Fix switch socket combination 2 in 1, 3 pin 5 and 15 Amp flush type universal complete all as specified and directed.
Supply and Fix switch piano, flush type single pole, one way 5 Amp complete all as specified and directed.
Supply and Fix switch piano, flush type single pole, two way 5 Amp complete all as specified and directed.
Supply and Fix surface ceiling rose made of bakelite of size 65mmx50mm with 3 terminals and PVC block. Ceiling rose will be fixed on PVC block.white finish complete all as specified and directed.
Supply and fix lamp holder insulated body suitable for batten fitting complete all as specified and directed.
Supply and Fix bell electric AC 230 V SP white finish complete all as specified and directed.
Supply and Fix electronic socket size, rotary, 5 speed step type regulator, 120-230 V white finish complete all as specified and directed.
Supply and fix LED tube light fittings,Batten type 1 x 20 W, 230V complete all as specified and directed.
Supply and fix LED bulb 9 watt fitting in holder complete all as specified and directed
Supply and fix fancy decorative light fitting including 1 x9/10 W LED lamp including all connected fixing accessories complete all as specified and directed.
Supply and fix 1 x 9 W LED 4000K mirror light including all connected fixing accessories complete all as specified and directed. Make: Havell's Cat No LUMLINEBS9WLED830SPCWH or equivalent Lucker/Bajaj
Disconnecting electrical wire from ceiling rose, taking down exhaust fan of any type/size and make, removing substances from bearing, bush by using kerosene oil, carrying out fresh lubrication using grease and to make the exhaust fan noise free for smooth functioning (including replacement of worn-out / unserviceable parts like capacitor, connector, bearing, copper winding, worn out fan blade PVC cable etc) assembling the repaired fan including painting with one coat of synthetic enamel paint of existing colour code including writing MES No with black synthetic enamel paint complete including testing and fixing exhaust fan as its own position, connection with point wiring complete all as specified and directed.
Material and Labour for fixing DB-SPN-8 way 230 V double door flush type made of sheet metal with 200A rated copper/ Aluminium bus bar including complete all as specified and directed.
Supply and fix SPN - 32A, 240V MCB.'C' Curve complete all as specified and directed.
Supply and fix SP 6A -32A, 240V MCB.complete all as specified and directed.
Supply and fix MCB TPN 100 Amp 50 Hz 415 V with rupturing capacity 10 KA C Curve complete all as specified and directed.
Material and Labour for fixing DB-VTPN-4 way 415 V double door flush type made of sheet metal with 200A rated copper/ Aluminium bus bar including dismantling old unserviceable DB all as specified and directed. Make: Havell's/Schneider/L&T.
Disconnecting electrical wire from ceiling rose, taking down ceiling fan of any type/size and make, removing substances from bearing, bush by using kerosene oil, carrying out fresh lubrication using grease and to make the ceiling fan noise free for smooth functioning (including replacement of worn-out / unserviceable parts like capacitor, connector, copper winding, canopy, bearing, down road, PVC cable etc) assembling the repaired ceiling fan including painting with one coat of synthetic enamel paint of existing colour code including writing MES No with black synthetic enamel paint complete including testing hanging the ceiling fan as its own position, connection with point wiring complete all as specified and directed.
Supply and fix cord flexible 23/0.0076 including dismantling old unserviceable one complete all as specified and directed.
Material and labour for earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25metre deep below natural ground level) with top edge of the plate not less than 1.5metre below normal ground level, connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel connected to main switch board/ main DB’s/ earth test point with and including necessary excavation and earth work in any type of strata, PCC 1:3:6, type C1 in chamber wall with 50mm thick, RCC cover 1:2:4, type B0 duly reinforced with 6 mm dia bar, @100mm both way with suitable lifting handle, charcoal dust and common salt mixed and packed in 150mm thick layer all around the earth plate, watering pipe of size 20mm dia medium grade, 0.63mm thick GI sheet funnel with wire mesh, GI protection pipe 15mm dia light grade up to 7.5m from electrode and engraving of earth marking on nearby structure/ building with cement motor 1:4 plate of size 200mm x 150mm x 15mm thick and writing of earth results with paint complete all as shown in electrical plate No. 3 of SSR Part-I complete all as specified and as directed. Note: - On testing if desired earth resistance is not obtained, the earthing will be redone at no extra cost.
Supply and fix security light fitting LED 30 W complete all as specified and directed. Make: Havell's CAT NO VILUMINASL30WLED757PASYBOPC or Equivalent Lucker/Bajaj
Material and Labour for bracket made out of GI pipe 42 mm dia medium grade, 0.6 mtr long bent to shape with MS flat iron clamps made out of 40mmX 6mm thick FI nuts, bolts including taking down old unserviceable complete all as specified and directed.
Sagar Constructions
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .