PROVISION OF CERTAIN MINOR WORKS AT INS CHILKA UNDER GE CHILKA

Amount

Surface excavation in any type of soil n.exc (not exceeding) 30 cm deep and averaging 30cm deep and getting out.

M&L for broken stone or boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for 75mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub base of floor /hard standing / path all as pecified and as directed.

M&L for 40mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate including finishing concrete surface even and smooth using extra cement complete all as specified and directed.

M&L for 22mm width glass dividing strip,3mm thick inserting in the position of concrete to confirming design complete all as specified and directed.

M&L for steel work as in tubular purlins, rafters, trussses etc including special shaped washers, plates, clamps, cleats etc complete joining the pipes with ERW or induction butt welds complete all as specified and as directed.

M&L for framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel')

S&F Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil etc all complete

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete all as specified and as directed.

M&L for brick work with fly ash bricks, straight or curved on plain exc 6m mean radius built in cement mortar 1:6.etc all complete

M & L 75mm thick PCC type C2 1:3:6 (40mm garade aggregate) as in plinth protection complete all as specified and directed by Engr-in-Charge

M&L for providing, cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs incl necessary form work complete all as specified and as directed.

M & L for 15 mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete curfaces mixed with water proofing compound 2% by weight of cement finished even and fairn and smooth without using extra cement complete all as specified and directed. Note : Water proofing compound shall be measured and paid separately.

Supply only Integral Water proofing Compound

M&L for preparing of surfaces of steel for painting of any description, over 10cm in width or girth, on new surface over a coat of primer of red oxide zinc and two coat of synthetic enamelled paint over it all as specified and as directed.

M&L for preparation of new plastered external wall surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces plaster even and smooth complete all as specified and as directed.

Returning filling incl spreading, levelling watering and well ramming in layers not.exce 25 CM all as specified and directed.

Removing excavated material, soil to a distance not exce 50M and depositing where directed at a level n.exe 1.50M above the existing point all as specified and directed.

M&L for 100mm thick PCC, type C2, 1:3:6 using 40mm graded stone aggregate as in path finished surface even and rough without using extra cement

M&L for chequered cement concrete tiles 30cmx30cmx 25mm thick, set jointed and pointed in neat cement slurry in floor with grey cement and pigment laid over and including 15mm thick screed bed in CM 1:4 etc all as specified and as directed.

M & L for providing, cement concrete type B1 1:2:4 (20 mm graded aggregatet)t in roof kerbs , kerb stone or mud stops, rounded or chamfered on edges complete all as soecified and as directed.

M&L for preparation of new concrete surfaces any decription over 10cm girth or width applying two coats of synthetic enamel pain (ordinary tint) (Each coat) as required complete all as specified

S&F powder coated coloured aluminium venetian blinds are made up horizontal slats stacked on top of one another and combining with roller blind functionality with connected accessories ie ladders, headrails, bottom bars, pull cord tassel with cord and slats complete fixed on walls including necessary fixing clips/brackets etc all as per specificafication of manufacture's instruction and directed.

Taking down existing curtin rod of any description and making good the surface to match the existing surface complete all as specified and directed.

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 1.5 TR etc all complete of Make:- VOLTAS/LG/HITACHI/ BLUE STAR

Supply and installed Voltage stablizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stablized at 230 V with accuracy of +/- 2.5% and of capacity 5.0 KVA MAKE -V-GUARD MODEL NO-VE400 /or eqivalent in microtek

Supply and fixing of DP switch with indicater-2M, 32 Amp suitable for Split/ window AC (On Off Switch) all as specified and directed Make Havells (DRO White) or equvalent to Standard / Legrand/HPL/L & T)

Supply & fixing in including connection modular socket outlet 2 /3 pin 6/16 Amps 2 modules complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply and fixing MCB SP 6 to 32 amp rating 240V, 10KA 'C' curve complete all as specified and directrd

M&L for point wiring with PVC insulated unsheathed stranded FRLS copper conductor cable of size 4.0 Sqmm, with PVC insulated unsheathed stranded FRLS copper conductor cable of size 4.0 Sqmm for earth continuity wire, to be drawn in and including PVC conduit heavy duty with concealed wiring, MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick switch board and brass screws with cap washers for DP switch including all necessary wall cutting and making good disturbed surface all as directed and specified.(Make of wire: .(Make of wire: Finolex/Polycab/Plaza Make of PVC Conduit :-Plaza/Prestoplast/Precision)

Supply and fixing modular metal flush box 3 Module complete all as specified and directed.

Supply and fixing white modular cover plate with frame 3 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

D RAVICHANDRAN (BID ID -3094922)

VAIKUNTHA PARIDA (BID ID -3095215)