Construction of Community Hall Near Baba Street in Tirunelveli Zone, Tirunelveli Municipal Corporation. Ward No.26

Earth work excavation for foundation by manual means for Isolated, Combined and Other type foundations in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and filling in foundation and basement with Crushed Stone Sand (M-Sand) in layers of not more than 1Scm thick well rammed watered and compacted etc., complete complying with standard specification.- M Sand filling

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incident,al charges such as water providing etc., complete as per standard specification

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal skutting using mild steel sheets of size 90cm x 60cm and '10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm

For Raft & Floor Beam

For plane surfaces such as slab,beam, etc.

For RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

Providing and laying in position, standardised concrete Mix M-20 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without inspiring strength and durability with about (5 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost ofreinforcement grill and fabricating charges, centering and shuttering and also including laying,vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc.,complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).

Foundation / Basement

Ground Floor

Suppling and fabricating and placing in position MS (or)R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Brick work in CM 1:5 (one cement & five sand) using ll class ground moulded bricks of size 9"X4 3/8"X 2 3/4" including finishing, curing, etc., complete complvinq with standard soecification.-

Basement

Super Structure

Supplying and filling in foundation and basement with Good earth in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.- Basement filling

Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard speciflcations (S.1.306) Page 2 of 14

Plastering with cement mortar ('1:3) 10mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard speciflcations (S.1.309

Paving the floor with design antiskid ceramic tiles (colour and shade as directed) of size 305mm x 305 mm x 6mm in all floor aver a base layer of cement mortar 1:3 (one cement and three sand) 20 mm thick laid in situ and pointed with same coloured cement.

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Weathering Course with Concrete Broken Brick .Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Supplying fixing of M.S sheet doors and widows and Grills including all cost and conveyance of materials to site and all labours charges for etc. complete asper standard specification.

Supply and fixing of PVC Solid Doors using 19gauge 19mm MS Sq,tubes for styles and frames, 15mm MS Sq.tubes for to, Lock and bottom rails. The Steel Tubes shall be covered with 5mm thick Solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including furniture and fittings. The over all size of styles shall be 50mm X 30mm. The over all size of top rail, Lock rail and bottom rail shall

Painting two coats with ready mixed approved paint over new steel surface including cost and conveyance all materials etc. complete asper standard specification.

Supply and run of 2 of 4 sq.mm(56/0.3) PVC insulated SC unsheathed Cu.conduction of 1100V on 7/20 GI bearer wire for service connection mains. (SD 65)

Supply and run of 2 of 6 sq.mm.(84/0.3)PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (class 'B' ) suitably bent at both ends with neccessay angle iron upright and end support for mains(SD 71)

Supplyand fixingof 16A TPN metal clads with on suitable angle ironwork withMS cable entry boxes for incoming andoutgoing with PWD earthing (SD145)

Earthing as per the ISI specification with an earth electrode of 2.1 mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mmx50mmx6mm, with necessary funneling arrangements with necessary masonry work and with38mm RCC cover slab for the brick masony. (SD 221)

Supply and fixing of 15A aeriual fuse unit(500A) on suitable 100x100 mm TW concealed box with hylem sheet on on the tapping pole with necessary clamps (SD 130)

Supply and Fixing of TNEB meter Board suitable for 32A single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1"x1/8" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection with 7/20 PVC insulated copper wire from EB meter to fuse unit,(SD 125).

Supply and Fixing of 5A or 10 Amps AC Single phase 230 V , 50 HZ watt hour metre on Suitable TW box complete with earth connections. (SD 124)

TNEB charges for new service connection main including all cost and conveyance etc., complete.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) for open PVC plug point PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box in flush with wall with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire

Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box for 15A 3 pin non inter locking wall socket with 15A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point

Wiring with 2 x 1.5 sq.mm. (22/0.3) for open PVC light point /fan point PVC insulated unsheathed SC copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A FT switch in flush with wall covered with hylem sheet of 3mm thick with painting of suitable color (for electronic regulator)

Supply and fixing of WT bulk head fitting with guardsuitable for 11W CFL lamp with CFL(SD 83)

Supply and fixing of 4Feet LED 20W Fitting with LED 20Wtube (LowerEnd) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting

supply and fixing of 25W LED street light fitting with LED (Lower end) with 19mm dia. GI pipe (class B) with 1 no.19mm GI bend complete on the existing post/ on wall with PVCunsheathed copper leads with MS clamps and with painting .(SD455)

Supply and fixing of 1200mm(48") sweep ACceiling fan complete with stepped electronic 300W regulator with 1metre down rod with fan clamp with side plates and cross arm of size 450mm (18")(sd106)

Supplying and fixing of following pipes and specials

25mm PVC Pipe

25mm PVC Union

25mm PVC FTA

25mm PVC MTA

25mm PVC Elbow

25mm PVC Bend

25mm PVC Coupler

25mm PVC Tee

25mm PVC Shoe

20mm PVC Pipe

20mm PVC Coupling

20mm PVC Tee

20mm PVC Ellbow

20mm PVC Bend

20mm PVC End Cap

20mm x 20mm Threaded Elbow

32mm PVC Pipe

32mm PVC Coupling

32mm PVC Elbow

32mm PVC Bend

PVC Adhesive (Solution)

Shellac

Wooden Plug, Clamp and Screws

110mm PVC Pipe

110mm PVC TEE

110mm PVC bend

110mm PVC Elbow

110mm PVC Shoe

15mm SD tap

1000 litre tank

Labour (Plumber: 1-Skilled, 1-Semi Skilled)

Writing name of the community hall using paint in community building as specified by department officers and the rate includes labour & material.