Provn of certain sanctioned LBW and Special Repair works at Old and New Mil Stn Kapurthala under GE Kapurthala

Amount

Dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engr-in-Charge.

M&L for glazed ceramic coloured tiles in vertical surfaces 450/x350x7mm thick set and jointed in neat cement slurry pointed in white or colour cement to match the colour,with 10 mm thick cement screed bed (1:4), complete all as specified and directed by Engr-in-Charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11sqm but n.exc 0.18 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in CM (1:6), complete all as specified and directed by Engr-in-Charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06sqm but n.exc 0.11 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in CM (1:6), complete all as specified and directed by Engr-in-Charge.

M&L for granite 20mm thick machine cut for cooking platform, bedded and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including 15mm thick bedding layer in CM 1:6, complete all as specified and directed by Engr-in-Charge.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed by Engr-in-Charge.

Demolition of brick/block masonry built in CM including all quoins, arches, pillars etc and clearing off the premises, complete all as specified and directed by Engr-in-Charge.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4, complete all as specified and directed by Engr-in-Charge.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge.

Use and waste of formwork to chajjas and similar items including edges rough finished complete all as specified and directed by Engr-in-Charge.

M&L for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending hooking etc & binding with mild steel binding steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed by Engr-in-Charge.

M&L RCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in chajjas etc, complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick work or concrete surfaces incl racking out joints, complete all as specified and directed by Engr-in-Charge.

M&L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick Rendering in CM 1:4 on brick work or concrete surfaces with water proofing compound finished even and smooth etc complete all as specified and directed by Engr-in-Charge. Note:- WPC shall be paid separately.

M&L for 5mm thick rendering in CM 1:3 on brick work or concrete surfaces finished even and smooth w/o using extra cement in ceiling etc complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper on ceiling over a coat of primer complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distermper over a coat of primer complete all as specified and directed by Engr-in-Charge.

M&L applying two coats of cement base paint on newly plastered or unplastered wall surface over a coat of cement primer including preparation of surfaces, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old plastered surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old plastered surfaces of walls and applying one coats of oil bound distermper complete all as specified and directed by Engr-in-Charge.

M&L applying two coats of cement base paint on old plastered or unplastered wall surface including preparation of surfaces, complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed by Engr-in-Charge.

M&L 75mm thick PCC 1:3:6 type C2 as in plinth protection finishing the surface even and smooth with out using extra cement, complete all as specified and directed by Engr-in-Charge.

Applying evenly a tack coat of industrial bitumen 85.25 @ 1.20 Kg/sqm including cleaning surfaces, complete all as specified and directed by Engr-in-Charge.

M&L PCC (1:5:10) type E2 using 40mm graded stone aggregate as in sub base, complete all as specified and directed by Engr-in-Charge.

M&L PCC type B-0 (1:2:4) (12.5mm stone graded aggregate), 25 mm thick as for receiving top finishing layer of ceramic tiles for sunken portion finished even and smooth etc complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area not exc 1.50 sqm each, complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area exc 1.50 sqm but n. exc. 4sqm each, complete all as specified and directed by Engr-in-Charge.

Taking down shutters exc 1.00 sqm and n.exc 2.00 sqm, complete all as specified and directed by Engr-in-Charge.

Taking down shutters and refixing in same opening exc 1.00 sqm and n.exc 2.00 sqm, complete all as specified and directed by Engr-in-Charge.

S&F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening, complete all as specified and directed by Engr-in-Charge.

S&F factory made solid Panel PVC moulded door shutter, 30mm thick (style) consisiting of frame made out of MS tubes for top and bottom rails. M.S. frame shall covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, bottom rail; panelling of plain colour PVC sheet 10mm thick to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing including fittings, complete all as specified and directed by Engr-in-Charge.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc size of frame 125 x 60mm filling hollow frame, complete all as specified and directed by Engr-in-Charge.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed by Engr-in-Charge, size of frame 105 x 60mm filling hollow frame .

M&L PCC 1:3:6 type C2 as in filling of chowkhats complete all as specified and directed by Engr-in-Charge.

S&F factory made 2nd class, hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to received glass, gauge, etc ( without sash bars) edges of framing plain, chambered or rounded, fitted with cut and mitred beads for securing glass , etc but difided into squares with plain chamfered or rounded mirted and rebated sash bars any numbers sizes of members of shutters complete all as specified and directed by Engr-in-Charge.

S&F framed work Fe 410-W(Gde-E-250)Quality-A as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering.Doors etc. to be prepared for hanging or sliding with and incl hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engr-in-Charge.

S&F 25mm flush shutters in cupboards, solid core construction, with block board core and plywood face panels, commercial type both sides, complete all as specified and directed by Engr-in-Charge.

S&F factory made 2nd class hard wood Plain, framed, panelled shutters 35 mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge.

S&F alumunium hinges for PVC door shutter, size of hinges in 100mm, complete all as specified and directed by Engr-in-Charge.

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 200mm, complete all as specified and directed by Engr-in-Charge.

S&F extruded aluminium alloys handles frabicated type anodized of size 150mm long, complete all as specified and directed by Engr-in-Charge.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 250mm, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old wooden surface exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new wooden surface exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer complete all as specified and directed by Engr-in-Charge.

S&F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Handles of Z Sec 20mm x 100mm long (b) stopper – 01 No per leaf (c) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (d) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (e) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note: Glass and painting shall be measured and paid separately under appropriate item (ii) Irrespective of whatever shown on drgs, MS gills shall be of 12mm dia MS square bar and paid separately.

S&F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note: Wire mesh and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed by Engr-in-Charge.

S&F steel ventilators fixed type with glazing bars etc complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified and directed by Engr-in-Charge.

S&F 4.00mm thick plain glass in squares n exc 0.5 sqm each pane and glazing with oil putty, complete all as specified and directed by Engr-in-Charge.

S&F 4.00mm thick figured glass, pinhead type in squares n exc 0.5 sqm each pane and glazing with oil putty, complete all as specified and directed by Engr-in-Charge.

S&F stainless steel wire cloth 0.56mm nominal dia of wire and avarage width of aperture 1.00mm and fixed with tinned tacks/screws with bolts incl leaping wooden, complete all as specified and directed by Engr-in-Charge.

M&L for framed work such as grills gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framed work of water tanks and similar work, complete all as specified and directed by Engr-in-Charge.

S&F 300mm MS ordinary rat rail rod pattern helical springs including roller and roller plate complete all as specified and directed by Engr-in-Charge.

Taking down GI tubing & connection 15mm dia laid in floor / trenches or fixed to walls, complete all as specified and directed by Engr-in-Charge.

S&F GI tubing 15mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors, complete all as specified and directed by Engr-in-Charge.

Taking down GI tubing & connection 20mm dia laid in floor / trenches or fixed to walls, complete all as specified and directed by Engr-in-Charge.

S&F GI tubing 20mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors, complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm bore CP bib taps fancy type cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed, complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15mm dia stop/angle valve, CP cast copper alloy with crutch or butterfly handle. Screwed down high pressure, screwed both ends for iron pipe and fixed, complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china squatting pan Orissa pattern wash down water closet of size 580x440 mm, white, with integral foot rests complete fixed in repairs with P or S trap, PVC flushing cistern low level of Make 10 ltrs capacity including brackets for flush tank, PVC flush pipe and all necessary fittings etc complete all as specified and directed by Engr-in-Charge.

S&F 20mm dia aluminium chromium plated tubular towel rails,D type,60cm long between flanges, complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC(SWR) floor trap with grating and diameter of outlet 75mm including jointing to waste pipe fixed with solvent cement complete all as specified and directed by Engr-in-Charge.

S&F in repairs fancy type chromium plated stop valves with long shank and cup (concealed type) cast copper alloy screweddown high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore fof size 15mm, complete all as specified and directed by Engr-in-Charge.

S&F in repairs for vitreous china ware wash basin white, flat back size 550 X 400mm including 15mm dia pillar tap chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections, complete all as specified and directed by Engr-in-Charge.

S&F in repairs shower rose 100mm with cp arm of chromium plated any colour or fixing with 15mm pipe (minimum weight 40gm) complete all as specified and directed by Engr-in-Charge.

S&F kitchen sink with drain board made of stainless steel 1mm thick sheet with plugs, washers and wastes including bedding in cement mortar including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm, complete all as specified and directed by Engr-in-Charge.

S&F utensil rack stainless steel of size 750x600x250 mm fixed on walls with screws, complete all as specified and directed by Engr-in-Charge.

S&F soap dish chromium plated heavy duty, complete all as specified and directed by Engr-in-Charge.

S&F in repair 25mm MS curtain rail powder coated with fixing brackets, stops, roller etc complete all as specified and directed by Engr-in-Charge.

Cutting chases pinning in brick/stone/blocks masonary in making good to facings where required and pointing in CM (1:3) to ends or eges of steps, cills, sun shades, shelves, lintel etc and cutting chases for concealed water tubing or etc and making good, complete all as specified and directed by Engr-in-Charge.

Taking down eaves gutters and rainwater pipes including all fittings, complete all as specified and directed by Engr-in-Charge.

Dismantling of cast iron pipe any diameter jointed with cement mortar or lead incl all fittings from wall or floors, complete all as specified and directed by Engr-in-Charge.

S&F 75 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed by Engr-in-Charge.

S&F 75 mm PVC (SWR) pipes in repair single socketed in any length laid in floor, complete all as specified and directed by Engr-in-Charge.

S&F 75 mm PVC (SWR) bend, complete all as specified and directed by Engr-in-Charge.

S&F 75 PVC (SWR) junction single,(single T) equal or unequal, complete all as specified and directed by Engr-in-Charge.

S&F 75 PVC (SWR) junction double,(double T) equal or unequal, complete all as specified and directed by Engr-in-Charge.

Add to Item No 79, 80 and 81 for 75mm dia access door, complete all as specified and directed by Engr-in-Charge.

S&F 110 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed by Engr-in-Charge.

S&F 110 mm PVC (SWR) bend with complete all as specified and directed by Engr-in-Charge.

S&F 110 PVC (SWR) junction single,(single T) equal or unequal, complete all as specified and directed by Engr-in-Charge.

S&F 110 PVC (SWR) junction double,(double T) equal or unequal, complete all as specified and directed by Engr-in-Charge.

Add to Item No 84, 85 and 86 for 110mm dia access door, complete all as specified and directed by Engr-in-Charge.

S&F 110mm PVC(SWR) vent cowl, complete all as specified and directed by Engr-in-Charge.

Dismantiling water tank PVC 500 Ltrs and removing from site, complete all as specified and directed by Engr-in-Charge.

S&F rotational moulded polythelene water storage tanks cylindircal water tank triple layer white colour for hoisted and fixed in postion of 500 ltrs capcity incl fittings, complete all as specified and directed by Engr-in-Charge.

S&F gunmetal globe and gate valve with iron welded hand secrewed both and for iron pipe 20mm fixed in repairs, complete all as specified and directed by Engr-in-Charge.

S&F in repairs Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm - 690 gms)

Dismantling of brick tiles or terracing tiles laid bedded and pointed in cement mortar in single layer on roofs, complete all as specified and directed by Engr-in-Charge.

Demolition of mud in roof any thickness including plastering & leeping removed complete all as specified and directed by Engr-in-Charge.

M&L for rendering 10mm thick cement mortar 1:3 on concrete surface even and smooth with waterproofing compound as directed by Engr-in-Charge

Supply only integral water proofing compound, complete all as specified and directed by Engr-in-Charge.

Preparation of newly plastered surface making surface completely dry and applying a coat of bitumen primer @ 0.40 ltr/sqm and after drying of primer apply APP modified water proofing membrane with non woven polyster reinforcement 3mm thick superior multipolymericweighing not less than 3kg/sqm with properties of high penetration and centre core consisting of 90 micron high molecular high density polyethylene (MHHDPE) film consisting of five layers with a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm under and over the APP membrane laid with torching application to the surface complete and sealing the side as well as end laps (overlaps should not be less than 10 cm)

M&L for 40mm thick brick tiles laid on 15mm screed bed in cement mortar 1:3 with jointing and pointing in cement mortar (1:3) mixed with 5% crude oil by weight of cement, complete all as specified and directed by Engr-in-Charge.

All as per item No 99 above but except brick tiles complete all as specified and directed by Engr-in-Charge.

M&L cement concrete Type B0 1:2:4 (12.5mm graded stone aggregate) in roof kerbs, rounded or chamfered edges complete all as specified and directed by Engr-in-Charge.

M&L for 40 mm thick cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in PCC padding over roof slab, complete all as specified and directed by Engr-in-Charge.

Excavating in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation n exc 10 sqm on plan and n exc 1.5 m depth and getting out soft/loose soil complete all as specified and directed by Engr-in-Charge.

M&L, PCC Cement concrete with 1:3:6 type C-2 Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for complete or 150 mm dia pipe complete all as specified and directed by Engr-in-Charge.

M&L providing cement concrete Type B1 1:2:4 (20 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed by Engr-in-Charge.

M&L, for NP-3 150mm dia pipe laid in trenches and jointed complete all as specified and directed by Engr-in-Charge.

M&L, PCC 1:4:8 TYPE D 2 using (40mm grade stone aggregate) if foundation of manholes complete all as specified and directed by Engr-in-Charge.

Returning filling in including spreading laveling watering and wall ramming in lauers not exc 26cm in soft/loose soil, complete all as specified and directed by Engr-in-Charge.

M&L Removing excavated material n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point, complete all as specified and directed by Engr-in-Charge.

M&L Providing precast reinforcement cement concrete Type B1 1:2:4 (20 mm graded stone aggregate) in landings, cover slabs (for man holes etc complete all as specified and directed by Engr-in-Charge.

S&F TMT bars 6mm to 8 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns,hooking ends and binding with and including mild steel wire (annealaed) not less than 0.9mm dia or securing with clips quality conforming to Fe-310-0 or Fe-410-0 all as specified and directed incl drilling to cement conc surface for fixing of reinforcement in position, complete all as specified and directed by Engr-in-Charge.

All as per item No 111 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed by Engr-in-Charge.

Dismantling mild steel work as in roof purlin, complete all as specified and directed by Engr-in-Charge.

Dismantling asbestos cement sheet in roof covering, complete all as specified and directed by Engr-in-Charge.

M&L mild steel rolled section Fe 410-W (Gde-E-250) Quality A as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates, complete all as specified and directed by Engr-in-Charge.

S&F Pre painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /clading to wall and two corrugated side overlap fixed with self taping screws as specified, complete all as specified and directed by Engr-in-Charge.

S&F rotational moulded polythelene water storage tanks triple layered 1000ltrs capacity with threaded lid white colour hoisted and fixed in postion incl fittings, complete all as specified and directed by Engr-in-Charge.

M&L for vitrified ceramic tiles light shade tiles 10 mm thick (square/rectangular) polished, area of each tile exc 0.42 and not exe 1.00 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in CM (1:6), complete all as specified and directed by Engr-in-Charge.

S&F anodised aluminium frame powder coated for doors & windows with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-Charge.

S&F Anodised aluminium door shutters, aluminium section including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 nos in each door anodised aluminium snap beading, screws etc complete all as specified and directed by Engr-in-Charge.

S&F Anodised aluminium window shutters, aluminium section including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 nos in each door anodised alumnium snap beading, screws etc complete all as specified and directed by Engr-in-Charge.

S&F 5.5mm thick sheet glass, pinhead type in squares exc 0.5 sqm each pane and glazing with oil putty, complete all as specified and directed by Engr-in-Charge.

Dismantling of wall lining or ceiling of any description fixed in any position fixed with nails/screws including fillets, complete all as specified and directed by Engr-in-Charge.

M&L for 6mm AC texture board for ceiling on aluminium snap grid frame work of 605 x 605 mm and hangers 6mm dia GI upto (1200mm length) adjusting level fixed to roof slab by means of celing cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fastner 12.5mm dia 40mm long complete all as specified and directed by Engr-in-Charge.

S&F 5mm thick printed colour PVC sheet in strips and channel feathered at the edges for fixing on solid pvc wall lining, and solid PVC partitions inclusive of solvent cement and fixing at site, complete all as specified and directed by Engr-in-Charge.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification, complete all as specified and directed by Engr-in-Charge.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge.

M&L for damp proof course 40mm thick in cement concrete 1:2:4, type B-0 to horizontal or vertical faces including necessary formwork complete all as specified and directed by Engr-in-Charge.

Dismantling posts or struts (wood, steel or RCC) in natural ground any section, including taking out embedded portion and making good distributed ground, complete all as specified and directed by Engr-in-Charge.

Dismantling barbed wire fencing from posts, complete all as specified and directed by Engr-in-Charge.

S&F Posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc,) including all necessery drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

S&F galvanised 2 strand steel barbed wire 2-24 mm dia barded with 2mm dia bar at 75 mm spacing and straining and fixing to any type of standard rail, standard bolts incl securing or tying at crossing with and provn of galvanized mild steel wire staple or steel pins (Each line of wire to be measured) complete all as specified and directed by Engr-in-Charge.

M&L for applying two coats of black bituminous paint on surface of any description wood, steel, iron, concrete, brick, stone exc 10cm in width or girth complete all as specified and directed by Engr-in-Charge.

Taking down aluminium point wiring for light, fan, bell socket, power socket etc complete including fittings and fixtures removing from site and making good disturbed surfaces of walls, floors, etc complete all as directed by Engr-in-Charge.

Material and labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC (FR) insulated cable in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.5 Sqmm insulated un-sheathed PVC insulated copper conductor common earth and connecting to earth dolly for :-

(a) One light point controlled by one, one way switch

(b) One fan point controlled by one, one way switch

(c) One socket outlet 3 Pin, 5 Amp on independent board

(d) One socket outlet 3 Pin, 5 Amp on same board.

(e) One bell point controlled by one bell push

(f) One light point controlled by two 2 -way switches

M&L for point wiring with 4.00 Sq mm single core multi-stranded copper conductor PVC (FR) insulated, unsheathed cable 1100 volt grade in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.50 Sq mm single core, multi-stranded copper conductor, PVC insulated, unsheathed cable for common earth and connecting for earth dolly for 5 pin, 15 Amp socket outlet on Independent board.

M&L for point wiring with 6.00 Sq mm single core multi-stranded copper conductor PVC (FR) insulated, unsheathed cable 1100 volt grade in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 6 Sq mm single core, multi-stranded copper conductor, PVC insulated, unsheathed cable for common earth and connecting for earth dolly for 5 pin, 15 Amp socket outlet on Independent board.

S&F switch piano flush type single pole one way 5 Amp

S&F switch piano flush type single pole one way 15 Amp

S&F Bell push flush type single pole one way 5 Amp

S&F socket out let 2 in 1, 3 pin 5 Amp flush type

S&F socket out let 2 in 1, 3 pin 15 Amp flush type

S&F switch piano flush type single pole two way 5 Amp.

M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body

M&L for bell multi music type, AC 230 Volts, single pole

Taking down old unserviceable flourescent tube light fitting 36/40 watt fluorescent tube light fittings direct to walls or roof as ordered and disconnecting electrically with the electrical system and all materials required for the same. The rates also include making good the same to match with the existing surface.

Supply, installation, testing and commissioning of 20 watt 4 ft long LED Batten housing made of extruded alluminium with milky white diffuser and inbuilt electronic driver system lumen output should be at least 1800 lumen with a CCT of 6000 K, power factor should be greater than 0.9 with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 complete all as specified and directed by Engr-in-Charge.

Taking down old unserviceable wall mounting fitting & supply & fix decorative wall mounting type made up of polycarbonate rings, and glass shade with lamp holders, connectors block, 1 x 09 watt LED Blub,glass fitted engineering plastic B22 d lamp holder with electrical copper contactcs, self screwed polycarbonate diffuser in opal finish for soothing light effect, LED 09 watt etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable complete cat part No LHDL0316009.

Taking down old unserviceable lamp holder and S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including LED lamp 09W.

Supply and fixing factory made sheet metal enclosure double door distribution board class IP-43 with 200 Amp rated copper bus bar 240 volts 4 way single pole and neutral link complete all as directed by Engineer-in-Charge.

Taking down old unsv DB and supply and fixing factory made sheet metal enclosure double door distribution board class IP-43 with 200 Amp rated copper bus bar 240 volts 8 way single pole and neutral link complete all as directed by Engineer-in-Charge.

Taking down unserviceable MCB’s and supply & fix following type/rating MCB’s including necessary connection as under:-

(a) S & F of MCB, 10 to 32 Amp, SP, 240 Volt

(b) S&F of MCB, 25 to 32 to Amp, SPN, 240 Volt

Taking down old unserviceable sub main wiring 6/ 4.00 Sqmm M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 6.00 Sqmm 1100 volts grade drawn PVC concealed conduit of size 19/20 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 6.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engineer-in-Charge. Note : Three run of 6.00 Sqmm cable and one run of PVC Conduit shall be measured & paid as one unit.)

S&F in replacement Exhaust fans of 230 Volt 300 mm sweep ventilator DB bouble ball bearing heavy duty motor, metal blade with protection steel bird guard and roubst complete including M&L for providing/cutting the round hole of required size in wall finishing the same supply and grounting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 23/.0076 copper cable rubber insulated from ceiling rose to exhaust fan motor and writing MES No. with black synthetic enamel paint 2.0 cm high complete all as specirfied and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed. (i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I. (ii) Item includes the cost of 7.50m GI pipe for protection of earth wire/strip Any variation in length shall be adjusted through deviation order. (iii) Item includes cost of 7.50m earth lead wire/strip. Any variation in length shall be adjusted through deviation order. (iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate.

Taking down old unserviceable regulator & supply & fix electronic type fan regulator stepped type on existing phenolic laminated sheet etc. suitable for ceiling fan.

COSMO BUILDERS

G M BUILDERS 36