Improved access to water through household connections in existing water supply village Saidpur Khurd and Hashampura Block Ajnala and District Amritsar under PRWSSIP 2a ii

Amount

Cost of Repair of Machinery Electrically driven Submersible Pumping set of reputed Make complete in all respects as per standard Specifications. (308 LPM 60 mtr Head) Rewinding & Repair of Pump set Complete in all respects

Providing & Fixing of new Control Panel consisting of electric appliances such as automatic Star Delta Push Button or oil immersed Starter, Main Switch, VM, Ampere Meter, ELCB, Shunt Capacitor, Single Phase preventer, Indicating Lamps, Kit-Kat etc. (reputed make) complete in all respects as per standard Specifications.

REPAIR OF PUMP CHAMBER

Terracing consisting of tiles 22.86cm×11.43cum×3.83cm laid over25mm mud plaster, 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65Kg. Per Sqm on top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc. (Including Carriage.)

12.5mm thick cement plaster 1:4 ( Including Carriage.)

Applying Pink Primer or-aluminum priming coat including preparation of surface With special quality paint

Applying priming coat with methal primer on new steel or iron work incluing preparation of surface and Painting two coats with ready mixed paint for metallic surfaces in all shades on steel or iron work with special quality paint.

White washing 3 coats inside of pump chamber Complete in all respects

Finishing wall with exterior decorative cement based paint such as snowcem robbiacem etc. on new work in two coats to give even shade.

Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of Paris and chalk mitti including finishing the surface to the required finish complete. Inside pump Chamber

Supplying & fixing glass panes including special metal sash putty of approved make.

Wiring in PVC Insulated Copper Conductor Single Core FR Cable (ISI Marked), 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for having electronic fan regulators (socket size), bell push, electronic buzzer, 3pin 6Amp., 3pin 16/20 Amp. Sockets and 6 Amp 16/20Amp., Switches (Flush piano type accessors) etc. backside painted sheet 3mm thick etc., & including the cost of flush piano type withces/sockets, step type electronic fan regulators 100 watts, PVC connector (For Fan Box and Electronic Buzzer), PVC Bush, Steel Hooks, Circular Inspection Box (Recessed Type and Deep Type) Conduit pipe & copper wire and other petty material etc. including the cost of cutting and filling up of chases:- (A&C-3)

Providing and fixing of ceiling fan of reputed make such as Crompton or equivalent

Providing and fixing of electric tube set of reputed make

Providing and fixing of Tubewell cover Complete in all respects

Providing & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipelines including joining & cost of Nut Bolt, rubber insertion etc. complete Note: If Non-return valves class PN-1.6 is used instead of Class PN-1.0, than 5% will be paid extra. A Class PN 1.0 as per ISI with Rubber flap

Providing and fixing Air Valve Complete in all respects

REPAIR OF OHSR CAPACITY 25000 LTR 18 MTR FSL

First Class burnt brick work laid in cement sand mortar 1:5 in plinth

Cement Concrete 1:8:16 with 40mm gauge stone aggregate to be used instead of brick ballast

Conglomerate floor 40mm cement concrete topping 1:2:4

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in – charge) 100mm o/d Class PN-1 as per ISI

Repair of Expansion Joint including shuttering & material complete in all respects

Prov & Fixing Manhole Cover Doom Size 560mmx560mm as per OHSR Specifications

Providing, Stringing out, cutting, Jointing and testing of ISI Marked C.I. Pipes Class-LA per IS:1536 and laying the same in trenches to correct alignment and gradients, jointed with rubber tyton joints fitted complete including all cartage.

150mm i/d pipe line laid complete.

100mm i/d pipe line laid complete.

Supplying & Fixing CI Specials as per IS: 1538 Complete as desired by Engineer in charge conforming to ISI Specification CI Specials upto 300mm i/d

Repair of over flow haudi of size 1.20x1.20x1.20m for OHSR Complete in all respects as per analysis.

Cement Concrete 1:2:4 with stone ballast or Shingle

First Class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth

12.5mm thick cement plaster in 1:4

Supplying, Fixing and testing at site Automatic electronic type water level indication system with gun meta float sensor and electrical cable suitable for three phase pump submersible/monoblock to be fixed on existing panel for OHSRs complete in all respects.

Plugging all leakages of existing RCC OHSR including necessary material e.g. cement, sand, Dr.Fixit etc. with pressure gun & cleaning of existing RCC OHSR etc. Complete in all respect as per site condition and as desired by Engineer-in-charge.

Painting two coat on iron sheets roofing with ready mixed paint in all shades on old work to On OHSR pipes give an even shades (a) With special quality paint 100mm i/d CI Pipe 47 mtr 90mm i/d CI Pipe 15 mtr

Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Including cost of specials (such as Tees, bends, sockets, elbows etc.) painting with anti corrosive bitumastic paint, testing, cutting threading inside building/railing for staircase (OHSR) and testing trenches in the ground 32mm i/d

Providing & Fixing Aluminium Ladder Inside the tank shall be 60cm wide made from Aluminium section LS 974 size, 66.68x31.75x4mm, weight 1.27 kg/m with steps made out of Aluminium section H, SP 3024 size 35x16.70x1.60mm, weight 0.362kg/m to be fixed on side in the top dome and other side in the bottome dome

Providing & Fixing 1 RCC Roof Ventilator Complete in all respects

REPAIR OF DEVELOPMENT OF WATER WORKS

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects as per standard Drawing D-6 & 8

Providing & fixing angle iron pickets with angle 40mm x40mm x 6mm including cost of concrete block & painting complete in all respects as per standard Drawing D-8

Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing D-7

Construction of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per standard Drawing D-3

Construction of brick masonry 223 mm thick toe wall in 1:5 upto 0.60 m depth around water works site.

Providing & fixing MS Sign Board as per standard size of DWSS as per analysis A-24 & Drawing D-20

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department Size 0.6m x 0.6m complte in all respects

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in – charge) 100mm o/d Class PN-1 as per ISI Sluice Valve Flanged

Construction of Cement Concrete, Foot Path with masonry toe wall & earth filling inside water works complete in all respects (Including Carriage)

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (Mechnically) (10kgf/sqcm) (excavation & including specials) 110 mm o/d

Providing & Installing Testing & Commissioning of One No. Electrically driven diaphragm opreated metering system chemical dosing chlorinator suitable for for delivering 0.5 to 6 liters of Bleaching Powder solution/ Sodium Hypo solution per hour under maximum delivery pressure upto 7 Kg/cm2 and suction left not less than 1.5 mtr., as per DWSS standard specifations.

Minor Repair & replacement of pipe associated with repair complete in all respects (90 mm pvc pipe)

Providing proposed water connection to household upto wall with providing, laying, jointing testing GI Pipelines 15mm i/d= 2.50 mtr, B-Class as per CSR 28.36 (A), (Above GL), Providing & Fixing MDPE Pipe 15mm i/d with specials 2.00 mtr (Below GL) including Cost of specials such as tees, bends, sockets, elbow, etc. cutting, threading and testing in trenches in the ground and ISI 15mm i/d GM ferrule as per IS:2692 and 3" i/d clamp with CI Bib Cock, 15mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65 (b). (Connection at Existing pipe line) = 56 (Connection at New pipe line) = 104

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications (Including Excavation)

PVC pipe 90mm o/d 6kg/cm2

PVC pipe 63mm o/d 6kg/cm2

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in – charge) 80mm I/d

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department (Including Carriage) Size 0.9m x 0.9m

Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting.

Dismantling of Bithminous course of flexible pavements by mannual means and disposal of dismantled material upto lead of 1000 mtrs, stacking servicable and unservicable material saperately as per technical clause 202 of MORT & H specifications.

CONDITIONS :-

Item for which no rate or price has been entered in will not be paid for the Employer when execut6ed and shall be deemed covered by the other rates and prices in the Bill of Quantities.

Unit rates and prices shall be quated by the bidder in indian ruppees.

Where there is a discrepancy between the rate in figures and words, the rates in words will govern.

Where there is a discrepancy between the rate and the line total resulting from muluplying the unit rate by quantity the unit rate quoted shall govern.

Any item of work not included in the above contract schedule of rates and got done at the site of work; the same will be paid according to CSR-2010 subject to the premium or discount tendered by the contractor. In the case of non-schedule items, the decision of the Engineer-in-charge will be final and binding upon the contractor. In case any item which is a part of lump-sum rate is be deducted @CSR rates + Ceiling premium prevailing on the date of tender

The work will be carried out in accordance with PWD Book of specifications - 1963 edition with upto date amendments.

Approximate quantities are given in the contract schedule of rates and these can vary at the time of execution of the work. The payment will be made according to the actual work done by the contractor.

All amendments issued on the common schedule of rates 2010. up to the date of opening of tenders will be applicable on the contract schedule of rates.

Contractor should clearly quote his rates in figures & words. Conditional tender will be rejected.

All items and rates provided in the DNIT are subject to the footnotes give in CSR-2010

The Engineer-in-charge will have full powers to change the layout of the work covered in this contract if considered necessary.

No claim will be entertained form the contractor in case, any mistake in description rates or unit occurs in any item taken in this schedule while preparing this DNIT or on account of typing or comparison or over writing. The same will be rectified at any time as per common schedule of rates 2010 along with upto date amendments.

The arrangements of bricks at site of work would be done by the contractor at his own level from his own source.

For any other non-schedule items, the contractor will submit through Engineer-in-charge, the analysis of rates in triplicate based on purchased vouchers. A margin of 10% shall be allowed for material components and 21.5% on labour components and contractor shall produce photo stat copies of the purchase vouchers in support of his claim. The decision of the Engineer-in-charge/Competent authority in the matter shall be final and binding on the contractor.

All the extra items will be got approved from the competent authority and no premium will be allowed on non schedule item

Pavement for the carriage of material shall be paid as per the rates quoted by the tenderer.

Time period allowed for completion of work in 6 months.

If contractor allowed for completion of work within 7 days from the date of allotment, DWSS reserve the right to impose penalty or withdraw the work and propose action for debarring in future tendering or both; decision of Chief Engineer (North) shall be binding.