864/WS-10/2020-21

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof-coverings, complete all as specified and directed.

S&F 0.63mm thick galvanised, corrugated, mild steel sheeting with two corrugations side lap , fixed with coach screws and washers, as in roofs, etc. with grade of zinc coating 275, complete all as specified and directed.

S&F 0.80mm thick plain, galvanised, mild steel sheeting, as in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed.

Dismantling timber scantlings 40 sqcm and over in section, in unframed work in any position, complete all as specified and directed.

S&F 2nd class soft wood, clean sawn timber, fixed in scantlings, complete all as specified and directed.

Dismantling wall and ceiling boards (fiber pulp, insulation, etc.) or insulation boards / slabs, any thickness, including cover fillets, complete all as specified and directed.

S&F plywood 6mm thick (05 Nos ply), grade BWR, type BB, commercial type, fixed to timber frame work with nails, as in ceiling, complete all as specified and directed.

S&F 2nd class soft wood plain fillets, square or rectangular in section, clean sawn, secured with nails or brads having sectional area exc 3 sqcm & not exc 6 sqcm, complete all as specified and directed.

S&F 2nd class soft wood plain fillets, square or rectangular in section, clean sawn, secured with nails or brads having sectional area not exc 3 sqcm, complete all as specified and directed.

Dismantling boardings of any description, fixed in any position with nails, complete all as specified and directed.

S&F 20mm thick boardings of 2nd class soft wood, clean sawn as in eaves board, fixed with nails, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and in pavings not exceeding 15cm thickness (below or above ground level), complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate), finished even and smooth without using extra cement as in plinth protection, laid in panels, complete all as specifed and directed by Engineer-in-Charge.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate), finished even and smooth, as in sub base of flooring, complete all as specifed and directed by Engineer-in-Charge.

M&L for 100mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate), as in flooring, finished even and fair without using extra cement, complete all as specified and directed by Engineer-in-Charge.

M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate), as in sub base of floors finished even and fair, comlpete all as specified and directed.

M&L for Non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

All as per item No.17 here-in-before but as in skirting over and including cement plaster 10mm thick in CM 1:3, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for Glazed ceramic coloured tiles of size 450mm x 350mm x 7mm as on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10mm thick rendering in CM 1:3, complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors / walls etc. laid bedded and pointed in any mortar, complete all as specified and directed.

M&L for Granite (of any type) work, 20mm thick, (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in CM 1:4, including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed or bedding layer in CM 1:3, complete all as specified and directed.

M&L for 20-25mm thick machine cut Kota stone slabs in flooring laid over and including 20mm thick cement screed bed in CM 1:4, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

M&L for 20-25 mm thick machine cut kota stone in riser of steps, skirting, dado and pillar, fixed over and including cement plaster 10mm thick in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

Taking down cement plaster of any description on brick or concrete walls, ceiling etc. including racking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work, stone masonry, concrete surfaces etc. in CM 1:4, finished even and smooth without using extra cement, complete all as specified and directed. Note:- 1. As per site requirement, water proofing compound shall be added to cement mortar. 2. Water proofing compound shall be measured and paid separately under respective item.

M&L for 5mm thick rendering in CM 1:3, as on ceiling surfaces including finishing the surfaces even and smooth without using extra cement, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc. 1.5 sqm each and making good disturbed surfaces to match with existing surfaces, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 sqm each and making good disturbed surfaces to match with existing surfaces, complete all as specified and directed.

S&F 1st class soft wood, plain solid straight chowkhats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints, complete all as specified and directed.

S&F 35mm thick 2nd class soft wood, plain framed panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board with commercial face veneers, complete all as specified and directed.

S&F 35mm thick 2nd class soft wood (kail), glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. size of members of shutters as specified in SSR Part-I section -8, clause 8.24(a), complete all as specified and directed .

S&F 30mm thick 2nd class soft wood (kail), glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. size of members of shutters as specified in SSR Part-I section -8, clause 8.24(b), complete all as specified and directed .

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, fixing in opening as per specifications and drawings, complete all as specified directed.

S&F factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain coloured PVC 'C' channel, having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitabele PVC sheet beading and joined together with solvent cement and fixing in the frame at site as per specifications and drawings, complete all as specified and directed.

S&F butt hinges, medium weight, cold rolled, mild steel of size 100mm, complete all as specified and directed

S&F butt hinges, medium weight, cold rolled, mild steel of size 75mm, complete all as specified and directed.

S&F 150mm long aluminium barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F 100 mm long aluminium barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F 150mm aluminum alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F 100mm aluminum alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F 300mm size aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F 300mm size mild steel ordinary rat tail rod pattern spring including roller plate, complete all as specified and directed.

S&F floor door stopper of aluminium body and tongue anodised with hard drawn steel spring, overall length of cover plate 140mm, fixed with screws, complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width or aperture1.40mm including wooden beading, complete all as specified and directed.

S&F 18/19mm thick prelaminated particle board, interior grade, prelaminated on one side with decorative choice lamination and on other side balancing white lamination fixed with screws to timber frame work, complete all as specified and directed.

S&F MS continuous (Piano) hinges, bright polished or electro galvanised with width of flap 30mm (when open), fixed as in repairs, complete all as specified and directed.

S&F in repairs/replacement drapery rod wooden finish, fancy type 20mm dia including brackets, phyenl corner rings 8 Nos minimum per length etc. complete all as specified and directed.

Taking up or down 15mm bore steel water tubing and connections, including cleaning for re-fixing or removal to store, complete all as specified and directed.

Taking up or down 20mm bore steel water tubing and connections, including cleaning for re-fixing or removal to store, complete all as specified and directed.

S&F steel water tubing 15mm bore 'medium grade', galvanised, with all fittings and fixed completely to walls and ceillings or laid in floors, complete all as specified and directed.

S&F steel water tubing 20mm bore 'medium grade', galvanised, with all fittings and fixed completely to walls and ceillings or laid in floors, complete all as specified and directed.

S&F in repairs/replacement angle valve, brass, chromium plated, fancy type, with capstan head handle, screwed down, high pressure, including CP brass wall flanges, screwed for 15mm bore pipe, complete all as specified and directed.

S&F in repairs/replacement bib tap cast copper alloy, chromium plated, fancy type, long body with capstan head handle, screwed down, high pressure, screwed for iron pipe or for brass ferrule of 15mm bore, complete all as specified and directed.

S&F Gun metal globe or gate valve, with iron wheel head, cast copper alloy, screwed down, light pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union 20mm bore, complete all as specified and directed.

S&F in replacement CP centre hole single lever basin mixer, fancy type for WHB with double action for hot and cold water, complete all as specified and directed.

S&F in replacement brass CP wall mixture for mixing hot and cold water, fancy type, screwed down for iron pipe and fixed, complete all as specified and directed.

S&F in replacement sink mixer with swinging spout (wall mounted model), brass, chromium plated, fancy type, with capstan head, handle lettered 'hot' and 'cold', screwed down, high pressure, including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, complete all as specified and directed.

S&F in replacement stainless steel sink with draining board, made out of 1mm thick sheet for kitchen with plugs, washers and waste pipe including bedding in CM, size 915mm x 460mm with bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F in replacement vitreous china wash hand basin including pedestal, white, flat back, size 550 x 400mm excluding taps, waste, chain and plug but including brackets, complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S&F in replacement PVC valveless, syphonic action type flushing cistern of 10 litres capacity, low level, white with inlet ball valve float and handle, including suitable brackets, complete all as specified and directed.

S&F in repairs/replacement vitreous china squatting pan, ‘Orissa’ pattern of size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) and necessary fittings, complete all as specified and directed.

S&F in replacement 500 litres capacity rotational moulded polyethylene (HDPE) water storage tanks, triple layered, hoisted & fixed in position all as specified in SSR Part-I, complete all as specified and directed.

S&F ball brass valve, 20mm dia high pressure, with polythene float and flynut, screwed for iron pipe or brass ferrule, complete all as specified and directed.

Taking down eave gutters, rain water pipes or soil waste and vent pipes (any size or pattern), including all fittings heads, shoes, bends, swan necks etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed.

S&F 75mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or laid in floors, complete all as specified and directed.

S&F 110mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

S&F in repairs/replacement PVC(SWR) floor trap of 75mm dia outlet, plain with grating including jointing with solvent cement, complete all as specified and directed.

S&F 75mm bore PVC(SWR) bends, any radius with oval access door, complete all as specified and directed.

S&F 110mm bore PVC(SWR) bends, any radius, complete all as specified and directed.

S&F in repairs/replacement 110mm bore PVC(SWR) bends, any radius with oval access door, complete all as specified and directed.

S&F PVC(SWR) pipe 110mm dia double socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F in repairs/replacement 75mm dia branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified and directed.

S&F in repairs 110mm branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified and directed.

M&L for preparation of new plastered wall surfaces and applying 3mm thick putty in two layers to obtain even and smooth finish using sand paper and applying two coats of distemper oil emulsion over a coat of primer, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint, white or tinted on plastered surfaces of walls over one coat of alkali resistant primer, complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling & applying two coat of distemper oil emulsion over one coat of primer, complete all as specified and directed.

Complete removal of existing treatment including scraping, removing all mud cakes with wire brush and gunny bags from old plastered surfaces and preparation of surfaces by using 3mm thick putty in two layers to obtain even and smooth finish using sand paper and applying two coats of distemper oil emulsion over one coat of primer, complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of plastered or unplastered old surfaces of walls and applying two coats of cement base paint over one coat of alkali resistant primer, complete all as specified directed.

M&L for preparation of old surfaces of ceiling and applying two coats of distemper oil emulsion, complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.

M&L for preparation of old steel and iron surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed.

S&F 2nd class hard wood, clean sawn timber, fixed in scantlings, complete all as specified and directed.

All as per Srl item No. 89.00 above, but except timber.

S&F 3mm thick glass dividing strips of width 38 mm and inserted in position conforming to design, complete all as specified and directed.

Demolition of brick work or stone masonry, built in cement mortar or cement lime mortar, including all quoins, arches, pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles, complete all as specified and directed.

M&L for brick work with subclass 'B´ bricks straight or curved on plan exc. 6m mean radius, buit in CM 1:6, complete all as specified and directed.

M&L for brick work with subclass ´B´ bricks straight or curved on plan exc. 6m mean radius buit in CM 1:4, complete all as specified and directed.

Supply only integral water proofing compound, complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete, complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate), as in cills, lintels upto 1.50 metre clear span, copings etc. and in similar works including weathering, slightly rounded or chamfered angles and throating and necesary form works, complete all as specified and directed.

M&L for PCC 1:3:6, type C-2 (using 40mm graded crushed stone aggregate), as in surface channels including weathering, slightly rounded or chamfered angles and throating and necesary form works, exposed surfaces of concrete shall be finished even & smooth using extra cement, complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitered/stopped ends etc. including weathering, slightly rounded or chamfered angles and throating and necesary form works, complete all as specified and directed.

Taking down carefully existing aluminium / copper point wiring on batten or in PVC conduit or in MS conduit with earth wire etc. (for light, fan, socket or power) complete and making good the disturbed surface of walls, floors, ceilings etc. to match with existing surfaces, complete all as specified and directed.

M&L for point wiring for one light point or fan point, controlled by one switch, SP, 230 Volts, complete with 1.5 Sqmm PVC insulated and unsheathed, copper conductor, multistranded FRLS single core, 1100 volt grade cable, in and including PVC casing & caping or PVC conduit 19/20mm dia ISI Marked, having wall thickness not less than 2mm thick including 1.50 Sqmm PVC insulated, FRLS unsheathed copper conductor cable as continuous earth wire with all accessories including lugs as required, complete all as specified and directed by Engineer-in-Charge. Note :- Modular white cover plate with frame and metal flush box will be measured and paid separately under respective items.

All as per Srl item No.101.00 above but for one 3/5 pin 5 Amps socket outlet point controlled by one switch on independent board.

All as per Srl item No.101.00 above but for one 3/5 Pin 5 Amps socket outlet point controlled by one switch on same board.

All as per Srl item No. 101.00 above but for one bell point controlled by one switch.

All as per Srl item No. 101.00 above but using 2.5 Sqmm single core multistranded copper conductor PVC insulated FRLS unsheathed with and including 2.5 Sqmm green solid copper conductor cable as continuous earth wire with lugs for 3/6 Pin 15 Amps socket outlet controlled by one switch on independent board.

S&F modular bell push, 6 Amps, one way, 1 module, complete all as specified and directed.

S&F bell ding dong type, AC, 230 Volts, single pole, complete all as specified and directed.

S&F modular switch, 6 Amps, 230 Volts, one way, one module, complete all as specified and directed.

S&F modular switch 16/20 Amps, 230 Volts, one way, one module, complete all as specified and directed.

S&F modular socket, 6 Amps, AC, 230 Volts, 2/3 Pin combined, 2 module, complete all as specified and directed.

S&F modular socket 6/16 Amps, 2/3 Pin combined, AC, 230 Volts, 2 module, complete all as specified and directed.

S&F modular fan regulator, 120W, electronic rotary, 0-4 step type, 240 Volts, 50 Hz, hum free, 2 module, complete all as specified and directed.

S&F lamp holder, insulated body PVC / Polycarbonate body with back plate suitable for batten fitting, complete all as specified and directed.

S&F ceiling rose, three terminals, polycarbonate isolated body, complete all as specified and directed.

S&F modular white cover plate with frame, 2 module and metal flush box, 2 module, complete all as specified and directed.

S&F modular white cover plate with frame, 3 module and metal flush box, 3 module, complete all as specified and directed.

S&F modular white cover plate with frame, 4 module and metal flush box, 4 module, complete all as specified and directed.

S&F modular white cover plate with frame, 6 module and metal flush box, 6 module, complete all as specified and directed.

S&F LED light fitting fixture, 20W, decorative ultra slim with co-extruded channel in thermally conductive material with plastic housing, heat sink, environmental friendly, energy efficient, ready to use, complete all as specified and directed. Make :- Havells Cat Part No. LHEXBXPNIN1WO20 / Wipro Cat Part No. LL20-221-XXX-65-NE / HPL Cat Part No. HLPT51820PCGCW / Philips Cat Part No. BN021CLED20SPSUCDLGR.

S&F LED mirror light fitting, 1x10W, 6500 K, decorative ultra slim linear LED lighting fixture with extruded aluminium heat sink, environmental friendly, energy efficient, ready to use, complete all as specified and directed. Wipro Cat Part No. LL20-111-XXX-65-NE or technocommercially equivalent make of Philips/Havells/Crompton.

S&F 10W, 6000 K LED bulk head luminaries with opal diffuser with accessories etc. complete all as specified and directed. Make :- HPL(HLPLEDBH10W(CW)) /Havells/CG.

S&F LED 10W (candle/ball type) with B-22 base, complete all as specified and directed. Make :- Havells/Philips/Halonix.

S&F distribution board iron clad, double door with IP-43 1K-09 protection suitable for MCCB as incomer and MCB as outgoing 415 Volts, 3 Phase, 50 C/s, 4 Way complete with appropriate size copper busbar and neutral link confirming to Legrand Cat Part No. 607913 or technocommercially equivalent make of Indoasian/Standard/L&T complete with one MCCB 3 Pole, 415 Volts, 100 Amps rating with rupturing capacity of 16KA and 12 Nos of MCB SP 63 Amps of the same make as of distribution board and including cutting chases to walls for fixing DB and making good the disturbed surfaces to match with existing surface, complete all as specified and directed. Note :- Outgoing MCB will be measured and paid separately under the respective item.

S&F sheet metal enclosure double door for mounting MCBs with 200 Amps rated busbar 8 way AC 240 volts with IP-43 protection including cutting chases to walls for fixing DB and making good the disturbed surfaces to match with existing surface, complete all as specified and directed. Make :- Indoasian/L&T /HPL.

S&F MCB SPN 63 Amps, 240 volts, 50 Hz, AC, made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity, complete all as specified and directed. Make :- Indoasian/L&T/HPL.

S&F MCB SP 6-32 Amps, 240 Volts, 50 Hz, AC, made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity, complete all as specified and directed. Make :- Indoasian/L&T/HPL.

M&L for submain wiring with two single core FRLS PVC insulated flexible copper conductor cable of size 2x6 sqmm and one single core PVC insulated flexible stranded copper conductor cable green colour of size 6.0 sqmm as earth lead, in and including PVC conduit / casing and capping and making good the disturbed wall surfaces to match with existing specifications, complete all as required at site and directed.

M&L for excavation in trenches in hard / dense soil not exceeding 1.5 m width and not exceeding 1.5 m in depth for laying cables including getting out soil, complete all as specified and directed. Note :- Cable shall be laid 60cm below ground level.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm in hard / dense soil, complete all as specified and directed.

Removing surplus excavated material from site not exceeding 50mtrs from starting point and depositing where directed at a level not exceeding 1.5mtrs above the starting point, complete all as specified and directed.

M&L for sand cushioning for cables in layers 8cm thick below and 15cm thick above the cable, complete all as specified and directed.

M&L for old size bricks, common burnt clay building bricks, sub-class ´B´, designation 75, for cable protection, complete all as specified and directed.

M&L for replacement of GI tubes, light grade, 40mm bore, for passing through cables, laid under floors or fixed to walls or along the poles, complete all as specified and directed.

M&L for XLPE insulated cable, armoured, heave duty, with aluminium conductor, 1100 volts grade, of cross sectional area 25 Sqmm and 4 core, complete all as specified and directed.

M&L for earthing, complete with galvanised steel earth plate electrode 60cm x60cm x6mm thick buried directly in ground (Earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 m below normal ground level connecting to the galvanised iron earth lead wire of 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and earth strip protected by provision of GI light grade pipe 20mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25x 25x 6mm with lugs 02 Nos and with 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate common salt and charcoal filling test point made out of 40mm / 6mm flat iron with fixing arrangement funnel wire mesh and earth work in hard dense soil returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per SSR-2009 Part-I and connecting to earth test point, complete all as specified and directed including testing on completion.

M/S Vivek Gupta and Co

M/S Tajamul Ah Buchh

M/S SUHEEL CONSTRUCTIONS

M/S Mohd Shafi Bhat

M/S Ghulam Nabi Wani

M/S REDLY ENGINEERS

M/S TAJ DIN KHARI

M/S PARVEZ AHMAD LONE