Road Safety Works on Highway Connecting Koratagere to AP border road at near 38.00 near ID Halli Circle Madhugiri Taluk Tumkur District

Road construction

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

Compacting Original Ground - Compacting original ground supporting embankment - Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of emba...

Mechanical Means -

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (R...

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

Granular Sub-Base - By Mix in Place Method - Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared sur...

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying ...

Tack coat on Granular surface treated with primer - Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface. R...

Tack coat on Bituminous surface - Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface clean...

Dense Graded Bituminous Macadam Grading - II for traffic <20 MSA - Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity HMP using crushed aggregates of specified gradi...

Bituminous Concrete Grading II for traffic <20 MSA - Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, pre...

Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting...

Cable Duct Across the Road - Providing and laying of a reinforced cement concrete pipe duct, 300 mm dia, across the road (new construction), extending from drain to drain in cuts and toe of sl...

Precast Cement Concrete Interlocking Blocks - Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Tra...

Road Safety Components

Kilometre Stone - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc - 5th kilometre stone (pr...

Kilometre Stone - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc - 200 m stone (precast). ...

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including ref...

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI ret...

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI ret...

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI ret...

Direction and Place Identification Signs upto 0.9 m2 Size Board. - Providing and erecting direction and place identification retro- reflectorised sign as per IRC:67:2022 made of high intensity...

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cats Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total int...

Road Delineators - Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fit...

Chevron Boards - Supply and installation of retro- reflective Chevron signboards of 600x450mm made out of cube corner micro prismatic grade sheeting confirming to Type XI standards of IRC:67:20...

Rumble Strips - Provision of 15 nos rumble strips covered with premix bituminous carpet, 15-20 mm high at center, 250 mm wide placed at 1 m center to center at approved locati...

Pedestrian Crossings as per IRC 99-2018 - Providing Speed Breakers/Raised pedestrian crossings in Trapezoidal section with 2.5 m Top width and transition length of 0.8 m length and height of...

Mechanical Means -

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

Steel Fabrication

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Fabrication, Supplying, Erection, Testing and Commissioning of . ms long Polygon high mast with Single/Multiple telescopic sections having, minimum overlap distance of 1.5 times of top section) thickn...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires ---- Including cost and conveyance of a...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.100 A ---- Including cost and conveyance of all materials, labour, hire charg...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying of Switch Disconnector Fuse Unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS-13947. 100 Amps. Rate : 5184.00 ---- Including cost and conveyance of all materials, l...

Supplying and Fixing HRC fuse unit base on existing switch/panel board. 100A to 300 Amps ---- Including cost and conveyance of all materials, labour, hire charges of machineries and equipments with al...

Supplying and fixing HRC fuse link on exising switch fuse base with watt loss as per IS-13703. 63A to 200 Amps ---- Including cost and conveyance of all materials, labour, hire charges of machineries ...

Supplying and fixing of 4 pole power contractor with NO/NC contractors on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 rating and as per IS-13947....

Supplying and Fixing Microprocessor based electronic timer (without contractor, din mounting using necessary bolts, nuts and washers etc.) 3- 120 sec. Setting ---- Including cost and conveyance of all...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade copper with flexible copper with low conductor resistance confirming to table 3 class 5 of IS:8130-1984 and (Virgin)...

Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped wi...

Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are ...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50 x 5...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 31, LT Cable,3x95 to 150 Sqmm ---- Including cost and conveya...

1.1 KV, XLPE or Heat resistant PVC insulated, PVC, exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part- I, Armouring strip thickness and resistivity as per IS-3975 ---- I...

GI Pipe B - Class as per IS-1239 GI Pipe - 50 mm Dia ---- Including cost and conveyance of all materials, labour, hire charges of machineries and equipments with all lead and lifts, loading and unload...

Supplying of Epoxy Terminating Kit (Pothead) suitable for 1.1 KV, LTUG Cable. ---- Including cost and conveyance of all materials, labour, hire charges of machineries and equipments with all lead and ...

Supplying of FGRP Aerial Fuse Board 30 Amps - 4 Way. (Page No. 15 of 27 Sl.No. 379 I.No. 46.03) Rate : 872.00 ---- Including cost and conveyance of all materials, labour, hire charges of machineries a...

Supplying of GI grounding pipe, B-Class, 42mm dia, 2.5 Mtr long, 3.2mm thick with bolt, nut, GI strips and washer complete. Minimum Weight of GI Pipe : 7.3 Kg ---- Including cost and conveyance of all...

Supplying of Rod type of earthing using 40mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300mm width and 3300 mm depth and using 50x6mm flat welded to ground rod as terminal & connected equi...

Guy Wire & GI Wire as per IS-21418 SWG GI Wire 8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM ---- Including cost and conveyance of all materials, labour, hire charges of machineries and equipments wi...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-397525 Sqmm, 2...

Supplying of Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each ---- Including cost and conveyance of all materials, labour, hire charges of machi...

Supplying of Good Quality Salt for grounding purposes packed in 50 Kg gunny bag. ---- Including cost and conveyance of all materials, labour, hire charges of machineries and equipments with all lead a...

Transparent Alkathine tube 19 mm dia, 2 mm thick in coils of 30 Mtr ---- Including cost and conveyance of all materials, labour, hire charges of machineries and equipments with all lead and lifts, loa...

Supplying of Heavy Duty Copper Terminal Long Barrel,25 Sqmm Copper Terminal, Apprx Wt: 11 Gm ---- Including cost and conveyance of all materials, labour, hire charges of machineries and equipments wit...

Supplying of Brass Cable Gland, 25mm ---- Including cost and conveyance of all materials, labour, hire charges of machineries and equipments with all lead and lifts, loading and unloading charges etc....