PROVIDING LT OVERHEAD LINE FROM 11 KV SUBSTATION NEAR MT COMPLEX TO 120 MEN JAWAN BARRACK SUBMERSIBLE PUMP AND AREA STREET LIGHT AT BSF CAMPUS HUMHAMA FTR HQ BSF KASHMIR

Amount

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps,bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .

Supplying and erection of 100 mm X 80 mm pin insulator complete with G. I. Spindle and nuts etc. as required .

Supplying and erection of galvanised 'D' iron clamps complete with shackle insulator (100 mm X 110 mm), G.I. bolts, nuts and washers, coach screws etc. as required.

Supplying and erection of 100 mm X 110 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required .

Erection of weasel ACSR condcutor(6/2.59+1/2.59),(128 kg/128) including binding etc compete as required.

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20 mm X 60 cm ), 7/ 4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.(i) 3½ X 120 sq. mm (45mm).

Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 meter length along the pole for protection of under ground cable as required.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc.with charcoal/ coke and salt as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling etc as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. i)160 mm dia (OD-160 mm & ID-135 mm nominal).

Supplying and fixing of single over hang pole top bracket 40 mm dia X 1.8 metres long G.I. pipe (medium class) and 80 mm dia x 40 cm length with suporting strengthing plate fixing on pole top with suitable 04 nos bolt for mounting of LED street light fitting including painting with primer and finish paint two or more coats etc. as required.

Supplying & laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing excavation, sand cushioning, protective covering and refilling the trench etc. as required.(ISI marked Make Havells /Polycab/ Finolex /CCI /KEI /RR Kabel)req.(Havells/Gloster/Laser/Finolax make)(i) 3½ X 35 sq. mm

(ii) 3½ X 120 sq. mm

Painting of of steel tubular pole hight 10 mtr steel pole including pole bracket, angle frame in installed position with two or more coat of synthetic enameled paint to give an even shade,over an under coat of oxide zinc chromate primer of approved braand manufactrure including scrafing and cleaning the surface etc as required.Approved make primer :Asian/Burger/Shilimer and Paint Make Asian/Apcolite.

SITC of steel tubular pole(swaged type 10 mtr long 410 SP 40 weight 128 kg approx as per specification duly welded with steel anchor base plate size 300mmx300mmx60mm thick) strut in cemnet concrete 1:3:6 (1 cement:3 coarse sand :6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling and secured with holding clamps,bolts,nut,etc as required. this steel tubular pole shoudl confirm following specification.i) Length of section (a) Bottem,mid & top = 5.20m+2.40m+2.40m,ii) Outside diameter and thickness of section,(a) bottem,mid & Top = 139.7x 4.50 mm+ 114.3x4.50mm+ 88.9x 3.25mm.

Supplying of weasel ACSR condcutor(6/2.59+1/2.59),(128 kg/128) including binding etc compete as required.

M.L. ELECTRICAL AND MECHANICAL WORKS