Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹7.7 LAdmitted-Finance | -22.00% | ₹7.7 L | L1 | Admitted-Finance |
| 2 | L2₹7.9 L+₹19,193.37 (2.49%)Admitted-Finance | -20.06% | ₹7.9 L+₹19,193.37 (2.49%) | L2 | Admitted-Finance |
| 3 | L3₹7.9 L+₹20,875.26 (2.71%)Admitted-Finance | -19.89% | ₹7.9 L+₹20,875.26 (2.71%) | L3 | Admitted-Finance |
| 4 | L4₹8.0 L+₹31,560.23 (4.09%)Admitted-Finance | -18.81% | ₹8.0 L+₹31,560.23 (4.09%) | L4 | Admitted-Finance |
| 5 | L5₹8.5 L+₹77,762.83 (10.1%)Admitted-Finance | -14.14% | ₹8.5 L+₹77,762.83 (10.1%) | L5 | Admitted-Finance |
Tender Value
₹9.9 L
EMD Value
₹19,787
Closing Date
16 Sept 2026, 4:00 pmClosed
EE(BM-PK)
Room no-1615 16th floor Palika Kendra New Delhi
A/R and M/O building in BM-PK Division during 2026-27 SH Replacement of sewer line tiles painting Distempering and other Miscellaneous repair works at Community Centre at Krishna Menon Lane under Humayun Lane S/c
2026_NDMC_298101_1
NITNO.51/EE(BM-PK)/2026-27
Open Tender
Civil Works - Buildings
Works
45 days
NDMC area
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹19,787
21 Sept 2026
8 Sept 2026
16 Sept 2026
8 Sept 2026
16 Sept 2026
8 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
All kinds of soil. | 25 | Cubic Metre | 263.5 | ₹6,587.5 |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides
of foundations etc. in layers not exceeding 20cm in depth, consolidating
each deposited layer by ramming and watering, lead up to 50 and for all lift. | 5 | Cubic Metre | 198.4 | ₹992 |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 1.2 | Cubic Metre | 7,974.7 | ₹9,569.64 |
| 4 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | 192 | Square Metre | 1,283.45 | ₹2,46,422.4 |
| 5 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 28 | Square Metre | 2,421.85 | ₹67,811.8 |
| 6 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16 mm | 14 | Each | 263.8 | ₹3,693.2 |
| 7 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm | 14 | Each | 116.55 | ₹1,631.7 |
| 8 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm | 28 | Each | 67.05 | ₹1,877.4 |
| 9 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | 71 | Kilogram | 781.85 | ₹55,511.35 |
| 10 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
25 mm thick | 43 | Square Metre | 1,972.05 | ₹84,798.15 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.18 MB
BOQ_397387.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .