Supply, erection and commissioning of 10 HP submersible motor pumpset with accessories to the proposed deep bore well at Combined Court Complex, Keezhavelli in Karaikal.

Amount

Supplying of electrically operated wet type submersible motor and pumpset (Texmo /KSB /Taro /Kirloskar make), AC 3 phase, 415 volts, 50 Hz, 2900-3000 RPM. The pump shall have brass impeller, high grade steel shaft with sufficient stages with suitable suction and delivery sizes, complete. The rate includes, all taxes, freight, etc., FOR at site in UT of Puducherry. The pumpset shall be guaranteed for a period of one year from the date of commissioning.(10 HP Submersible motor and pumpset open Well).

Supplying and fixing of 4KVAR power capacitor (CG/L&T/Siemens make) for 10 HP motor complete.

Providing and fixing 50 mm dia GI pipe (Class B) conforming to IS 1239 (Part 1:1990) with GI fittings including trenching, refilling etc., complete for UG cable duct.

Supplying and fixing of fully automatic air break star-delta starter range for 10A to 23A F.A.S.D. (Bharat Culter Hammer/L&T/Siemens make) with suitable M.S. angle frame etc., complete.- 15HP to 17.5 HP pumpsets

Supplying,fixing and lowering into the borewell high tensile threaded PVC column pipes which are to be connected to the submersible pump,including labour charges,jointing materials etc.,complete.-100 mm dia

Supply and fixing of 80/100mm dia. M.S. erection clamps of size 80mmx12mm with bolts, nuts, washer etc., complete.

Supplying and fixing of 1x3x4 sqmm (single run) PVC insulated copper submersible flat flexible cable of Finolex make complete.-upto 10HP pumpset.

Supplying of 3.5/ 4x25 sqmm underground cable (Paragon/suncab/Empire) complete.-upto 25HP pumpset.

Laying of UG cable and providing termination of cable joint with suitable cable gland,cable socket etc., complete - 3.5/4 x 25 sqmm cable.

Supplying and fixing of pole clamp to hold the G.I. Pipe with electric post.

Making earth pit of G.I. pipe for earthing in earth pit with 40mm dia. G.I. pipe medium class of length 3.05m perforated with 46 Nos of 12mm dia. holes, pipe lowered in bore holes of 150mm dia. and filled in with charcoal and salt in alternative layer of 300mm, the top of G.I. pipe shall be clamped. Earth pit shall be provided with 60cm dia precast ring with 60cm depth alround,covered with R.C.C. precast slab etc. as per I.E. standards.

Supplying and fixing of copper flat (25 x 3mm) for earthing arrangements including bolts and nuts etc.

Supplying and fixing of C.I. adapter which is to be connected to submersible pump delivery pipe.-100 mm dia

Supplying and laying of 40mm dia. PVC pipe (Class 3 - PN 0.6 Mpa) conforming to IS 4985 : 2000 for inserting submersible cable from borewell to starter.

Supplying, fixing and lowering into the borewell the GI pipes of medium class (TATA, TNT, Nezone, Apollo, Zenith) which are to be connected to the submersible pump, including labour charges, jointing materials etc.,complete.-100 mm dia

Providing and fixing C.I. Ball type non return valve (PN 1) conforming to IS 318 & IS 1363, with bolts, nuts, rubber insertion etc.,complete (the tail pieces if required will be paid separately) - 100 mm dia.

Providing and fixing C.I. sluice valve (PN 1) (with cap) conforming to IS 14846 and ISI marked, with bolts, nuts, rubber insertion etc.,complete (the tail pieces if required will be paid separately) - 100 mm dia

Providing and laying in position flanged C.I. specials such as tees, bends, collors, tapers, caps etc.conforming to IS specification 1538 and ISI marked - 80 to 200mm dia.

Providing flanged joints to double flanged C.I / D.I. pipes and specials, including testing of joints -100mm diameter pipe

Erection, testing and commissioning of motor and pumpset complete.The rate includes obtaining electricity service connection from Electricity Department also.