Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.9 LAccepted-Finance R O TEMISGAM | LEH LADAKH | LADAKH | 194101 | L1 | Accepted-Finance Admitted | |
| 2 | L2₹7.0 L+₹11,996.30 (1.75%)Accepted-Finance S O TSERING NORBOO R O NYOMA | L2 | Accepted-Finance Admitted | |
| 3 | L3₹7.8 L+₹92,917.90 (13.5%)Accepted-Finance MUDH | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L3 | Accepted-Finance Admitted |
Tender Value
Refer Docs
EMD Value
₹15,720
Closing Date
10 Oct 2022, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Divisional Forest Officer, Leh
Divisional Forest Office, Forest Division Leh Fort Road UT of Ladakh
Construction of roofing by way of steel posts, trusses and aluminium sections and ceiling at forest rest house, nyoma.
2022_FEE_7588_3
E-Tender (39) of FDL 2022-23
Open Tender
Civil Works - Others
Works
60 days
Nyoma
Please refer Tender documents.
2 documents required · 2 mandatory
₹400
Divisional Forest Officer, Leh
₹15,720
17 Oct 2022
6 Oct 2022
11 Oct 2022
6 Oct 2022
10 Oct 2022
6 Oct 2022
Amount
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. including carraige complete job. - Welded - (65x65x6)mm a) T-Beam 5 x 10'-0" = 50.00rft b) Rafter 5 x 10'-6" = 52.50rft Total = 102.50rft or 31.25 mtr @5.84kg/mtr = 182.50 kg - (45x45x6)mm a) Vertical post member 5 x 2 x 1'-0" = 10.00rft 5 x 1 x 0'-6" = 2.50rft b) Inclined member 5 x 2 x 3.43 rft = 34.30rft 5 x 1 x 3.46 rft = 17.30rft Total = 64.10rft or 19.54 mtr @3.96kg/mtr = 77.38 kg - (200x180x6)mm Gusset plate/connecting plate 5 x 11 = 55 nos. @1.70kg/no. = 93.50kg - (300x300x6)mm Gusset plate 2 x 10 = 20 nos. @4.24kg/no. = 84.80kg - (M 16x150)mm M.S. Bolt 10 x 4 x 0.50 rft = 20rft or 6.10mtr. @0.30kg/mtr. = 1.83kg Net Total = 440.00 kg
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. including carraige complete job. - Hot finished seamless type tubes - (50x100x2)mm Vertical Post 10 x 7'-0" = 70.00rft or 21.34mtr @4.58kg/mtr = 97.74kg - (35x75x2)mm Purlin 5 x 32'-0" = 160.00rft or 48.78mtr @3.33kg/mtr = 162.44kg Total = 260.18kg
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including carraige complete job. = 10 x 1'-0" x1'-0" x 2'-0" = 20.00cft or 0.57cum
Centering and shuttering including strutting, propping etc. and removal of form work for: - Foundations, footings, bases for columns = 10 x 4 x 1'-0" x 2'-0" = 80.00sft or 7.43sqm
Providing and fixing termal painted coated G.S. Sheet of required thickness including polymer coated L-hook, bolt& nuts 8mm dia. limpet & bitumen washers complete work. including carraige complete job. - 0.53mm thick = 1 x33'-0"x 12'-0" = 396.00sft or 36.79sqm
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections /appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size includingnecessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) - Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15). including carraige complete job. Frames (1.5" x 2.5") Single Groove V/M: Section A: 1 x 2 x 9'-0" = 18.00rft 1 x 1 x 7'-0" = 7.00 rft Section B: 1 x 2 x 9'-0" = 18.00rft Section C: 1 x 2 x 9'-0" = 18.00rft H/M: Section A: 2 x 3 x 1'-11" = 11.52rft 2 x 1 x 3'-6" = 7.00 rft Section B: 2 x 15 x 1'-11" = 57.60rft Section C: 2 x 7 x 1'-10" = 25.62rft Total = 162.74rft or 49.62mtr @1.130kg/mtr = 65.00 kg Double Groove : V/M: Section A: 1 x 2 x 9'-0" = 18.00rft 1 x 1 x 1'-9" = 1.75 rft Section B: 1 x 14 x 9'-0" = 126.00rft Section C: 1 x 6 x 9'-0" = 54.00rft H/M: Section A: 3 x 1 x 1'-11" = 5.76rft Section B: 15 x 1 x 1'-11" = 28.80rft Section C: 7 x 1 x 1'-10" = 12.81rft Total = 294.49rft or 89.78mtr @1.450kg/mtr = 130.18 kg Bottom members (3" x 2.5") Single Groove H/M: Section A: 3 x 1 x 1'-11" = 5.76rft Section B: 15 x 1 x 1'-11" = 28.80rft Section C: 7 x 1 x 1'-10" = 12.81rft Total = 47.37rft or 14.44mtr @2.107kg/mtr = 30.43 kg Clips: (Section A,B,C & Door) = 1463.40 rft or 446.16 mtr @0.071kg/mtr = 31.68kg G-Channel : (For sliding door) = 8.00rft or 2.44mtr @1.621kg/mtr = 3.96kg Net Total = 262.25kg
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) - Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15). including carraige complete job. Door Shutter : (3"x2.5") Single groove V/M: 2 x 7'-0" = 14.00rft H/M: 3 x 3'-0" = 9.00rft Total = 23.00rft or 7.00mtr @2.107kg/mtr = 14.75kg
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in charge. - Pre-laminated particle board with decorative lamination on both sides. complete job. Section A: 3 x 1'-11" x 2'-0" = 11.52 sft Section B: 15 x 1'-11" x 2'-0" = 57.60 sft Section C: 7 x 1'-10" x 2'-0" = 25.62 sft Door shutter: 1 x 3'-0" x 2'-0" = 6.00 sft Total = 100.74sft or 9.36sqm
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.) including carraige complete job. With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm Section A: 3 x 1'-11" x 4'-7" = 26.38 sft 4 x 1'-11" x 1'-9" = 13.44 sft Section B: 15 x 1'-11" x 4'-7" = 131.90 sft 15 x 1'-11" x 1'-9" = 50.40 sft Section C: 7 x 1'-10" x 4'-7" = 58.67 sft 7 x 1'-10" x 1'-9" = 22.42 sft Door shutter: 1 x 3'-0" x 4'-3" =12.75 sft Total = 315.96sft or 29.35sqm
Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. - For sliding door
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm - For sliding door
Providing and fixing Aluminium sliding roller
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm diax40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long,the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimetre channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimetre channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with: - 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095-Part 1 : 2011 (Board with BIS certification marks) = 1 x 31'-0"x10'-0" = 310.00sft or 28.80sqm
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand). including carraige complete job. = 1 x 20'-0" x 2'-6" = 50.00 sft = 2 x 10'-0" x 2'-6" = 50.00 sft Total = 100.00sft or 9.29sqm
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20 mm nominal size stone aggregate. Flooring = 1 x 20'-0" x 10'-0" = 200.00 sft or 18.58sqm
Providing and fixing good quality solid cotton curatins for doors and windows of approved make. Size : (7'x4')
Providing and laying of traditional style central carpet of approved quality. Size : (12'x14') = 168.00 sft
M/S PHUNCHOK DORJEY
M/S TSEWANG OTSAL
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .