REPAIR, MAINTENANCE AND SERVICE OF DG SETS, LT PANELS AND CONNECTED MISC ITEMS AT JUTOGH, SANJAULI, CHAIL, KUFRI AND KELVIN GROVE UNDER GE (I) JUTOGH

Amount

Servicing of DG Set (Make: Cummins) of capacity 630 kVA ,checking entire system as per manufacturer's catalogue such as checking all parts for serviceability, taking down defective parts such as fuel filter assembly, by pass filter assembly, lube oil filter assembly, air cleaner assembly etc. and replacing the same with same size, make and capacity of parts, Cleaning all the serviceable filters and draining out the old used engine oil from the oil sump, cleaning oil sump and refilling new engine oil of required grade up to required level and including checking of control panel, tightening of loose connections and testing to DG Set to the entire satisfaction of the Engineer-in-Charge. Note : (i) Minor items like nut, bolts, lugs , cloths , cotton etc are incl in quoted rates. (ii) Spare parts/Engine oil/filters shall be measured and paid for separately under relevent items. (iii) Minimum 6 months gap/200 Hrs of run whichever is earlier shall be considered for next service. (iv) Each service will be measured and paid separately.

Supply only Air filter as per existing

Supply only Diesel Filter as per existing

Supply only Oil filter as per existing.

Supply only Bypass filter as per existing.

Supply only Hose flexible Bypass

Supply only Camshaft thrust bearing

Supply only Crankshaft thrust bearing

Supply only Filler cap

Supply only Fuel filter bracket

Supply only Water Seperator

Supply only Water Inlet connection

Supply only Intake Valve

Supply only Spring Valve

Supply only Injector adaptor

Supply only Engine lubricating primer Check Valve

Supply only Temperature sensor

Supply only Pressure sensor

Supply only Anti Vibration damper pads

Repair, maintenance and cleaning of radiator of DG set (630 kVA) incl dismentling and taking down carefully, draining and refixing after repair incl Descaling, cleaning, repairing , soldering, brazing etc., complete all as specified and directed. Note: Coolant will be measured and paid separately.

Supply only Thermostat as per existing

Supply only Thermostat housing as per existing

Supply only Water bypass connection

Supply only Water bypass plain hose

Supply only Radiator water connection

Supply only Radiator Flexible hose

Supply only Fan spacer

Supply only Fan drive ball bearing

Supply only Fan drive V Belt

Repair, maintenance of water circulating pump of DG set (630 kVA) incl dismentling and taking down carefully and refixing after repair, complete all as specified and directed. Note: Spare parts shall be measured and paid for separately under relevent items.

Supply only Water inlet connection

Supply only Water inlet guide spring

Supply only Water inlet compression spring

Supply only Water inlet pump drive V belt

Supply only Water outlet connection

Supply only Ball bearing of water pump

Repair, maintenance and Calibration/tuning of Fuel pump of DG set (630 kVA) incl dismentling and taking down carefully and refixing after repair complete all as specified and directed. Note: Spare parts shall be measured and paid for separately under relevent items.

Supply only Fuel pump bushing

Supply only Fuel pump thrust bearing

Supply only Fuel pump gasket.

Supply only Fuel Supply tube

Supply only Fuel Supply Check Valve

Supply only Fuel filter flexible hose

Supply only Fuel filter Check Valve

M&L for checking of Alternator assly and starter 24V including all electrical system and wiring of DG set (630 kVA) and replacement of all unserviceable electrical wiring including connectors, broken joints and burnt wire/leads and testing etc complete all as specified and directed. Note: Spare parts shall be measured and paid for separately under relevent items.

Supply only Bracket for Alternator

Supply only Tension adjustor

Supply only Battery terminals

Supply only Starter 24V

Supply only V Belt for alternator

Repair, maintenance and cleaning of exhaust manifold of DG set (630 kVA) incl dismentling and taking down carefully and refixing after replacement of all unserviceable parts complete all as specified and directed. Note: (i) Coolant will be measured and paid separately. (ii) Spare parts shall be measured and paid for separately under relevent items.

Supply only Exhaust Valve

Supply only Exhaust flexible connection

Supply only Gasket Exhaust connection.

Supply only stainless steel nut bolt washer and screw complte.

M&L Cleaning the tank after dismantling fuel tank if reqd from DG set (630 kVA) and welding if reqd & fixing in the same position complete all as specified and directed.

Servicing of DG Set (Make: Kirlosker) of capacity 160 kVA ,checking entire system as per manufacturer's catalogue such as checking all parts for serviceability, taking down defective parts such as fuel filter assembly, by pass filter assembly, lube oil filter assembly, air cleaner assembly etc. and replacing the same with same size, make and capacity of parts, Cleaning all the serviceable filters and draining out the old used engine oil from the oil sump, cleaning oil sump and refilling new engine oil of required grade up to required level and including checking of control panel, tightening of loose connections and testing to DG Set to the entire satisfaction of the Engineer-in-Charge. Note : (i) Minor items like nut, bolts, lugs , cloths , cotton etc are incl in quoted rates. (ii) Spare parts/Engine oil/filters shall be measured and paid for separately under relevent items. (iii) Minimum 6 months gap/200 Hrs of run whichever is earlier shall be considered for next service. (iv) Each service will be measured and paid separately.

Supply only Air filter as per existing

Supply only Diesel Filter as per existing

Supply only Oil filter as per existing.

Supply only Oil bypass filter as per existing.

Supply only Hose flexible Bypass

Supply only Camshaft thrust bearing

Supply only Crankshaft thrust bearing

Supply only Filler cap

Supply only Fuel filter bracket

Supply only Water Seperator

Supply only Water Inlet connection

Supply only Intake Valve

Supply only Spring Valve

Supply only Injector adaptor

Supply only Engine lubricating primer Check Valve

Supply only Temperature sensor

Supply only Pressure sensor

Supply only Anti Vibration damper pads

Repair, maintenance and cleaning of radiator of DG set (160 kVA) incl dismentling and taking down carefully, draining and refixing after repair incl Descaling, cleaning, repairing , soldering, brazing etc complete all as specified and directed. Note: Coolant will be measured and paid separately.

Supply only Thermostat as per existing

Supply only Thermostat housing as per existing

Supply only Water bypass connection

Supply only Water bypass plain hose

Supply only Radiator water connection

Supply only Radiator Flexible hose

Supply only Fan spacer

Supply only Fan drive ball bearing

Supply only Fan drive V Belt

Repair, maintenance of water circulating pump of DG set (160 kVA) incl dismentling and taking down carefully and refixing after repair complete all as specified and directed. Note: Spare parts shall be measured and paid for separately under relevent items.

Supply only Water inlet connection

Supply only Water inlet guide spring

Supply only Water inlet compression spring

Supply only Water inlet pump drive V belt

Supply only Water outlet connection

Supply only Ball bearing of water pump

Repair, maintenance and Calibration/tuning of Fuel pump of DG set (160 kVA) incl dismentling and taking down carefully and refixing after repair complete all as specified and directed. Note: Spare parts shall be measured and paid for separately under relevent items.

Supply only Fuel pump bushing

Supply only Fuel pump thrust bearing

Supply only Fuel pump gasket.

Supply only Fuel Supply tube

Supply only Fuel Supply Check Valve

Supply only Fuel filter flexible hose

Supply only Fuel filter Check Valve

M&L for checking of Alternator assly and starter 24V including all electrical system and wiring of DG set (160 kVA) and replacement of all unserviceable electrical wiring including connectors, broken joints and burnt wire/leads and testing etc complete all as specified and directed. Note: Spare parts shall be measured and paid for separately under relevent items.

Supply only Bracket for Alternator

Supply only Tension adjustor

Supply only Battery terminals

Supply only Starter 24V

Supply only V Belt for alternator

Repair, maintenance and cleaning of exhaust manifold of DG set (160 kVA) incl dismentling and taking down carefully and refixing after replacement of all unserviceable parts complete all as specified and directed. Note: (i) Coolant will be measured and paid separately. (ii) Spare parts shall be measured and paid for separately under relevent items.

Supply only Exhaust Valve

Supply only Exhaust flexible connection

Supply only Gasket Exhaust connection.

Supply only stainless steel nut bolt washer and screw complte.

M&L Cleaning the tank after dismantling fuel tank if reqd from DG set (160 kVA) and welding if reqd & fixing in the same position complete all as specified and directed.

Servicing of DG Set (Make: Mahindra) of capacity 100 kVA ,checking entire system as per manufacturer's catalogue such as checking all parts for serviceability, taking down defective parts such as fuel filter assembly, by pass filter assembly, lube oil filter assembly, air cleaner assembly etc. and replacing the same with same size, make and capacity of parts, Cleaning all the serviceable filters and draining out the old used engine oil from the oil sump, cleaning oil sump and refilling new engine oil of required grade up to required level and including checking of control panel, tightening of loose connections and testing to DG Set to the entire satisfaction of the Engineer-in-Charge. Note : (i) Minor items like nut, bolts, lugs , cloths , cotton etc are incl in quoted rates. (ii) Spare parts/Engine oil/filters shall be measured and paid for separately under relevent items. (iii) Minimum 6 months gap/200 Hrs of run whichever is earlier shall be considered for next service. (iv) Each service will be measured and paid separately.

Supply only Air filter as per existing

Supply only Diesel Filter as per existing

Supply only Oil filter as per existing.

Supply only Oil bypass filter as per existing.

Supply only Hose flexible Bypass

Supply only Camshaft thrust bearing

Supply only Crankshaft thrust bearing

Supply only Filler cap

Supply only Fuel filter bracket

Supply only Water Seperator

Supply only Water Inlet connection

Supply only Intake Valve

Supply only Spring Valve

Supply only Injector adaptor

Supply only Engine lubricating primer Check Valve

Supply only Temperature sensor

Supply only Pressure sensor

Supply only Anti Vibration damper pads

Repair, maintenance and cleaning of radiator of DG set (100 kVA) incl dismentling and taking down carefully, draining and refixing after repair incl Descaling, cleaning, repairing , soldering, brazing etc., complete all as specified and directed. Note: Coolant will be measured and paid separately.

Supply only Thermostat as per existing

Supply only Thermostat housing as per existing

Supply only Water bypass connection

Supply only Water bypass plain hose

Supply only Radiator water connection

Supply only Radiator Flexible hose

Supply only Fan spacer

Supply only Fan drive ball bearing

Supply only Fan drive V Belt

Repair, maintenance of water circulating pump of DG set (100 kVA) incl dismentling and taking down carefully and refixing after repair complete all as specified and directed. Note: Spare parts shall be measured and paid for separately under relevent items.

Supply only Water inlet connection

Supply only Water inlet guide spring

Supply only Water inlet compression spring

Supply only Water inlet pump drive V belt

Supply only Water outlet connection

Supply only Ball bearing of water pump

Repair, maintenance and Calibration/tuning of Fuel pump of DG set (100 kVA) incl dismentling and taking down carefully and refixing after repair complete all as specified and directed. Note: Spare parts shall be measured and paid for separately under relevent items.

Supply only Fuel pump bushing

Supply only Fuel pump thrust bearing

Supply only Fuel pump gasket.

Supply only Fuel Supply tube

Supply only Fuel Supply Check Valve

Supply only Fuel filter flexible hose

Supply only Fuel filter Check Valve

M&L for checking of Alternator assly and starter 12V including all electrical system and wiring of DG set (100 kVA) and replacement of all unserviceable electrical wiring including connectors, broken joints and burnt wire/leads and testing etc complete all as specified and directed. Note: Spare parts shall be measured and paid for separately under relevent items.

Supply only Bracket for Alternator

Supply only Tension adjustor

Supply only Battery terminals

Supply only Starter 12V

Supply only V Belt for alternator

Repair, maintenance and cleaning of exhaust manifold of DG set (100 kVA) incl dismentling and taking down carefully and refixing after replacement of all unserviceable parts complete all as specified and directed. Note: (i) Coolant will be measured and paid separately. (ii) Spare parts shall be measured and paid for separately under relevent items.

Supply only Exhaust Valve

Supply only Exhaust flexible connection

Supply only Gasket Exhaust connection.

Supply only stainless steel nut bolt washer and screw complte.

M&L Cleaning the tank after dismantling fuel tank if reqd from DG set (100 kVA) and welding if reqd & fixing in the same position complete all as specified and directed.

Servicing of Fire diesel pump (Make: Kirlosker) of capacity 90 BHP ,checking entire system as per manufacturer's catalogue such as checking all parts for serviceability, taking down defective parts such as fuel filter assembly, by pass filter assembly, lube oil filter assembly, air cleaner assembly etc. and replacing the same with same size, make and capacity of parts, Cleaning all the serviceable filters and draining out the old used engine oil from the oil sump, cleaning oil sump and refilling new engine oil of required grade up to required level and including checking of control panel, tightening of loose connections and testing to DG Set to the entire satisfaction of the Engineer-in-Charge. Note : (i) Minor items like nut, bolts, lugs , cloths , cotton etc are incl in quoted rates. (ii) Spare parts/Engine oil/filters shall be measured and paid for separately under relevent items. (iii) Minimum 6 months gap/200 Hrs of run whichever is earlier shall be considered for next service. (iv) Each service will be measured and paid separately.

Supply only Air filter as per existing

Supply only Diesel Filter as per existing

Supply only Oil filter as per existing.

Supply only Oil bypass filter as per existing.

Supply only Hose flexible Bypass

Supply only Camshaft thrust bearing

Supply only Crankshaft thrust bearing

Supply only Filler cap

Supply only Fuel filter bracket

Supply only Water Seperator

Supply only Water Inlet connection

Supply only Intake Valve

Supply only Spring Valve

Supply only Injector adaptor

Supply only Engine lubricating primer Check Valve

Supply only Temperature sensor

Supply only Pressure sensor

Supply only Anti Vibration damper pads

Repair, maintenance and cleaning of radiator of Fire diesel pump (Make: Kirlosker) of capacity 90 BHP incl dismentling and taking down carefully, draining and refixing after repair incl Descaling, cleaning, repairing , soldering, brazing etc complete all as specified and directed. Note: Coolant will be measured and paid separately.

Supply only Thermostat as per existing

Supply only Thermostat housing as per existing

Supply only Water bypass connection

Supply only Water bypass plain hose

Supply only Radiator water connection

Supply only Radiator Flexible hose

Supply only Fan spacer

Supply only Fan drive ball bearing

Supply only Fan drive V Belt

Repair, maintenance of water circulating pump of Fire diesel pump (Make: Kirlosker) of capacity 90 BHP incl dismentling and taking down carefully and refixing after repair complete all as specified and directed. Note: Spare parts shall be measured and paid for separately under relevent items.

Supply only Water inlet connection

Supply only Water inlet guide spring

Supply only Water inlet compression spring

Supply only Water inlet pump drive V belt

Supply only Water outlet connection

Supply only Ball bearing of water pump

Repair, maintenance and Calibration/tuning of Fuel pump of Fire diesel pump (Make: Kirlosker) of capacity 90 BHP incl dismentling and taking down carefully and refixing after repair complete all as specified and directed. Note: Spare parts shall be measured and paid for separately under relevent items.

Supply only Fuel pump bushing

Supply only Fuel pump thrust bearing

Supply only Fuel pump gasket.

Supply only Fuel Supply tube

Supply only Fuel Supply Check Valve

Supply only Fuel filter flexible hose

Supply only Fuel filter Check Valve

M&L for checking of Alternator assly and starter 12V including all electrical system and wiring of Fire diesel pump (Make: Kirlosker) of capacity 90 BHP and replacement of all unserviceable electrical wiring including connectors, broken joints and burnt wire/leads and testing etc complete all as specified and directed. Note: Spare parts shall be measured and paid for separately under relevent items.

Supply only Bracket for Alternator

Supply only Tension adjustor

Supply only Battery terminals

Supply only Starter 12V

Supply only V Belt for alternator

Repair, maintenance and cleaning of exhaust manifold of Fire diesel pump (Make: Kirlosker) of capacity 90 BHP incl dismentling and taking down carefully and refixing after replacement of all unserviceable parts complete all as specified and directed. Note: (i) Coolant will be measured and paid separately. (ii) Spare parts shall be measured and paid for separately under relevent items.

Supply only Exhaust Valve

Supply only Exhaust flexible connection

Supply only Gasket Exhaust connection.

Supply only stainless steel nut bolt washer and screw complte.

M&L Cleaning the tank after dismantling fuel tank if reqd from Fire diesel pump (Make: Kirlosker) of capacity 90 BHP and welding if reqd & fixing in the same position all as specified and directed.

Servicing of DG Set (Make: Mahindra) of capacity 63 kVA, checking entire system as per manufacturer's catalogue such as checking all parts for serviceability, taking down defective parts such as fuel filter assembly, by pass filter assembly, lube oil filter assembly, air cleaner assembly etc. and replacing the same with same size, make and capacity of parts, Cleaning all the serviceable filters and draining out the old used engine oil from the oil sump, cleaning oil sump and refilling new engine oil of required grade up to required level and including checking of control panel, tightening of loose connections and testing to DG Set to the entire satisfaction of the Engineer-in-Charge. Note : (i) Minor items like nut, bolts, lugs , cloths , cotton etc are incl in quoted rates. (ii) Spare parts/Engine oil/filters shall be measured and paid for separately under relevent items. (iii) Minimum 6 months gap/200 Hrs of run whichever is earlier shall be considered for next service. (iv) Each service will be measured and paid separately.

Supply only Air filter as per existing

Supply only Diesel Filter as per existing

Supply only Oil filter as per existing.

Supply only Oil bypass filter as per existing.

Supply only Hose flexible Bypass

Supply only Camshaft thrust bearing

Supply only Crankshaft thrust bearing

Supply only Filler cap

Supply only Fuel filter bracket

Supply only Water Seperator

Supply only Water Inlet connection

Supply only Intake Valve

Supply only Spring Valve

Supply only Injector adaptor

Supply only Engine lubricating primer Check Valve

Supply only Temperature sensor

Supply only Pressure sensor

Supply only Anti Vibration damper pads

Repair, maintenance and cleaning of radiator of DG set (63 kVA) incl dismentling and taking down carefully, draining and refixing after repair incl Descaling, cleaning, repairing , soldering, brazing etc complete all as specified and directed. Note: Coolant will be measured and paid separately.

Supply only Thermostat as per existing

Supply only Thermostat housing as per existing

Supply only Water bypass connection

Supply only Water bypass plain hose

Supply only Radiator water connection

Supply only Radiator Flexible hose

Supply only Fan spacer

Supply only Fan drive ball bearing

Supply only Fan drive V Belt

Repair, maintenance of water circulating pump of DG set (63 kVA) incl dismentling and taking down carefully and refixing after repair complete all as specified and directed. Note: Spare parts shall be measured and paid for separately under relevent items.

Supply only Water inlet connection

Supply only Water inlet guide spring

Supply only Water inlet compression spring

Supply only Water inlet pump drive V belt

Supply only Water outlet connection

Supply only Ball bearing of water pump

Repair, maintenance and Calibration/tuning of Fuel pump of DG set (63 kVA) incl dismentling and taking down carefully and refixing after repair complete all as specified and directed. Note: Spare parts shall be measured and paid for separately under relevent items.

Supply only Fuel pump bushing

Supply only Fuel pump thrust bearing

Supply only Fuel pump gasket.

Supply only Fuel Supply tube

Supply only Fuel Supply Check Valve

Supply only Fuel filter flexible hose

Supply only Fuel filter Check Valve

M&L for checking of Alternator assly and starter 12V including all electrical system and wiring of DG set (63 kVA) and replacement of all unserviceable electrical wiring including connectors, broken joints and burnt wire/leads and testing etc complete all as specified and directed. Note: Spare parts shall be measured and paid for separately under relevent items.

Supply only Bracket for Alternator

Supply only Tension adjustor

Supply only Battery terminals

Supply only Starter 12V

Supply only V Belt for alternator

Repair, maintenance and cleaning of exhaust manifold of DG set (63 kVA) incl dismentling and taking down carefully and refixing after replacement of all unserviceable parts complete all as specified and directed. Note: (i) Coolant will be measured and paid separately. (ii) Spare parts shall be measured and paid for separately under relevent items.

Supply only Exhaust Valve

Supply only Exhaust flexible connection

Supply only Gasket Exhaust connection.

Supply only stainless steel nut bolt washer and screw complte.

M&L for cleaning the tank after dismantling fuel tank if reqd from DG set (63 kVA) and welding if reqd & fixing in the same position all as specified and directed.

Servicing of DG Set (Make: Kirloskar) of capacity 10 kVA ,checking entire system as per manufacturer's catalogue such as checking all parts for serviceability, taking down defective parts such as fuel filter assembly, by pass filter assembly, lube oil filter assembly, air cleaner assembly etc. and replacing the same with same size, make and capacity of parts, Cleaning all the serviceable filters and draining out the old used engine oil from the oil sump, cleaning oil sump and refilling new engine oil of required grade up to required level and including checking of control panel, tightening of loose connections and testing to DG Set to the entire satisfaction of the Engineer-in-Charge. Note : (i) Minor items like nut, bolts, lugs , cloths , cotton etc are incl in quoted rates. (ii) Spare parts/Engine oil/filters shall be measured and paid for separately under relevent items. (iii) Minimum 6 months gap/200 Hrs of run whichever is earlier shall be considered for next service. (iv) Each service will be measured and paid separately.

Supply only Air filter as per existing

Supply only Diesel Filter as per existing

Supply only Oil filter as per existing.

Supply only Oil bypass filter as per existing.

Supply only Hose flexible Bypass

Supply only Camshaft thrust bearing

Supply only Crankshaft thrust bearing

Supply only Filler cap

Supply only Fuel filter bracket

Supply only Water Seperator

Supply only Water Inlet connection

Supply only Intake Valve

Supply only Spring Valve

Supply only Injector adaptor

Supply only Engine lubricating primer Check Valve

Supply only Temperature sensor

Supply only Pressure sensor

Supply only Anti Vibration damper pads

Repair, maintenance and cleaning of radiator of DG set (10 kVA) incl dismentling and taking down carefully, draining and refixing after repair incl Descaling, cleaning, repairing , soldering, brazing etc complete all as specified and directed. Note: Coolant will be measured and paid separately.

Supply only Thermostat as per existing

Supply only Thermostat housing as per existing

Supply only Water bypass connection

Supply only Water bypass plain hose

Supply only Radiator water connection

Supply only Radiator Flexible hose

Supply only Fan spacer

Supply only Fan drive ball bearing

Supply only Fan drive V Belt

Repair, maintenance of water circulating pump of DG set (10 kVA) incl dismentling and taking down carefully and refixing after repair complete all as specified and directed. Note: Spare parts shall be measured and paid for separately under relevent items.

Supply only Water inlet connection

Supply only Water inlet guide spring

Supply only Water inlet compression spring

Supply only Water inlet pump drive V belt

Supply only Water outlet connection

Supply only Ball bearing of water pump

Repair, maintenance and Calibration/tuning of Fuel pump of DG set (10 kVA) incl dismentling and taking down carefully and refixing after repair complete all as specified and directed. Note: Spare parts shall be measured and paid for separately under relevent items.

Supply only Fuel pump bushing

Supply only Fuel pump thrust bearing

Supply only Fuel pump gasket.

Supply only Fuel Supply tube

Supply only Fuel Supply Check Valve

Supply only Fuel filter flexible hose

Supply only Fuel filter Check Valve

M&L for checking of Alternator assly and starter 12V including all electrical system and wiring of DG set (10 kVA) and replacement of all unserviceable electrical wiring including connectors, broken joints and burnt wire/leads and testing etc complete all as specified and directed. Note: Spare parts shall be measured and paid for separately under relevent items.

Supply only Bracket for Alternator

Supply only Tension adjustor

Supply only Battery terminals

Supply only Starter 12V

Supply only V Belt for alternator

Repair, maintenance and cleaning of exhaust manifold of DG set (10 kVA) incl dismentling and taking down carefully and refixing after replacement of all unserviceable parts complete all as specified and directed. Note: (i) Coolant will be measured and paid separately. (ii) Spare parts shall be measured and paid for separately under relevent items.

Supply only Exhaust Valve

Supply only Exhaust flexible connection

Supply only Gasket Exhaust connection.

Supply only stainless steel nut bolt washer and screw complte.

M&L Cleaning the tank after dismantling fuel tank if reqd from DG set (10 kVA) and welding if reqd & fixing in the same position all as specified and directed.

S&F in replacement of self priming booster pump 1.0 Hp having discharge range 3200-420 lph and head range 6-38m with 25x25mm size complete all as specified amd directed. Note: Old unsv pump will be deposited in MES Store.

S&F against replacement DOL starter of capacity upto 5 HP , 415 V , 50 Hz single Phase complete all as specified and directed.

S&F in replacement post top lantern LED type 15 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete including taking down old unserviceable light fitting complete all as specified and directed.

Supply, fixing or laying HDPE (DWC) tubing 50 mm dia as per IS:16205 part 24 fixing on poles, walls under floors, laying on surface etc as reqd at site including clamps to hold pipe at position complete all as specified and directed. Note: All items and accessories , bend, joints, nut bolts, clamps for wall fixing as per site requirement etc are incl in quoted rates.

S&F KIOSK box weather proof made out of PVC including made out of one piece mounted SMC base and door pole mounted hinged door size 300 x 200 x 105mm inside dimension comprising of aluminum bus bar 4 strips for 3 phase and neutral 63 Amp nd 6.0 Amp MCB for controlling the street light fitting with necessary MS nuts bolts and washer complete all as specified and directed.

S&F in replacement of PVC insulated flexible FRLS-H PVC unarmoured cable three core with copper conductor 1.5 Sqmm size 1100 volt grade complete connection all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, using galvanised iron strip 32×6mm with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 40 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point, including all earth work excavation, returning filling and disposal of surplus soil and testing on completion, complete all as specified and directed.

All as per Srl Item No 343.00 above but for copper plate 60×60cm ×3.15mm thick electrode and 20×3mm copper strip as earthing lead, complete all as specified and directed.

S&F in replacement MCCB 4 Pole, 415 V, Adjustable type, 630 Amps with breaking capacity 36 KA, complete all as specified and directed.

All as per Srl Item No 345.00 above but for 400A, complete all as specified and directed.

All as per Srl Item No 345.00 above but for 250A, complete all as specified and directed.

All as per Srl Item No 345.00 above but for 200A, complete all as specified and directed.

All as per Srl Item No 345.00 above but for 160A, complete all as specified and directed.

S&F in replacement of inverter capacity 3500VA 36-48V DC having output voltage (Mains Mode) same as input and in (UPS Mode) 200V~ 230V ± 10% with input voltage (standard range) 110 V ~ 280 V automatic switchover on operation and UPS transfer time ≤ 15 milli sec, complete all as specified and directed.

S&F in replacement 12 Volt, 180 AH maintanance free battery with 02 years warranty suitable complete all as specified and directed.

S&F in replacement 12 Volt, 18 AH maintanance free battery with 02 years warranty suitable complete all as specified and directed by Eng-in-Charge.

S&F semi Integrated two in one Automatic light (Inbuilt LiFePO 4 battery ) Luminaire wattage 12 watt, system voltage 12 volts, Lumen per watt >125 , battery type LiFePO04 ( 12.8 V & 13/14 AH), IP65, colour temperature 6000K-6500K incl taking down old unser and complete fixing and connection all as per specified and directed. Make: Approved from Ministery of New and Renewable energy or Certified by govt approved lab

S&F Joist, channel, angle, or tee sections, fixed independently with welding, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of Fe-410W(GdeE-250) qualityB against worn out channel, angle iron etc complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer including prepration on steel surfaces of any description over 10 cm width or girth, complete all as specified and directed.

M&L for spraying chemical (Roundup) on area to remove unwanted vegitation/grass at various locations as directed by Engr-in-Charge. Note: (i) Labour and equipments to spray chemical on required area are incl in quoted rates. (ii) Spray will be repeated quarterly or as per direction of Engr in Charge.

S&F in replacement of onload changeover switches 4 pole 250 Amps , 415 volts , fixed in sheet metal enclosure complete all as specified and directed.

S&F in replacement of Squirrel cage Induction Motors of capacity 75HP/55KW 4 pole 1500rpm with TEFC Enclosure conforming to protection IP 55 Horizontal Foot Mounted (B3),continuously rated (S1) suitable for operation on 415+/- 10% V,3 Phase 50Hz+/- 5% AC supply with ambient 50ºC,Class "F" insulation with temperature rise limited to Class "B" Performance Efficiency values are conforming to IS12615 / IS/IEC 60034 complete as specified and directed. Make: Mather platt/Crompton/Kirlosker/ABB. Note: Old unsv motor will be deposited in MES Store.

S&F in replacement of centrifugal pump of horizontal multistage type, of discharge 40 Lps and 100m head, 2900 rpm with new coupling and key suitable with exisitng electric motor shaft including alignment and nut-bolts, washers testing commissioning complete all as specified and directed by the Engr-in-Charge. Make: Kirlosker/ Mather Platt/ Grundfos Note: Old centrifugal pump dismantled at site will be deposited in MES store by contractor.

Repair and replacement of AC/DC drivers upto 50 watt Watts for LED street light fittings incl taking down old unsv fitting and refixing after replacement of old unsv driver incl complete connections, complete all as specified and directed.

Repair and replacement of AC/DC drivers 60-70 Watts for LED street light fittings incl taking down old unsv fitting and refixing after replacement of old unsv driver incl complete connections, complete all as specified and directed.

Repair and replacement of AC/DC drivers 80-100 Watts for LED street light fittings incl taking down old unsv fitting and refixing after replacement of old unsv driver incl complete connections, complete all as specified and directed.

Servicing, cleaning testing of RO plant of capacity 30/50/60 LPH and make full functioning of plant complete all as specified and directed.

S&F in replacement of sediment filters for RO system of capacity 30/50/60 ltr/hours complete all as specified and directed.

S&F in replacement of carbon filters for RO system of capacity 30/ 50/60 ltr/hours complete all as specified and directed.

S&F in replacement of RO membrane filters assembly for RO system of capacity 30/50/60 ltr/hours complete all as specified and directed.

S&F in replacement of RO DC adaptor, input voltage 220 volts, 50 Hz, output voltage 48 volts suitable for RO syatem of capacity 30/50/60 ltr/hours complete all as specified and directed.

S&F in replacement of RO booster pump, 48 volt DC, nominal flow rate not less than 1.8 LPM, max. pump output pressure 110 Psi, Max inlet pressure 60 Psi suitable for fixing in RO system of capacity 30/50/60 ltr/hours complete all as specified and directed.

S&F in replacement of pre filter for RO system of capacity 30/50/60 ltr/hours complete all as specified and directed.

S&F in replacement of flow switch for RO system of capacity 30/50/60 ltr/hours complete all as specified and directed.

S&F in replacement of solenoid valve for RO system of capacity 30/50/60 ltr/hours complete all as specified and directed.

S&F in replacement of pvc pipe for water connection suitable for RO system of capacity 30/50/60 ltr/hours complete all as specified and directed.

S&F in replacement of pvc pipe connector suitable for connection of PVC pipe of RO system of capacity 30/50/60 ltr/hours complete all as specified and directed.

S&F in replacement of street light bracket made out of GI pipe note less than 25mm bore light grade suitable for fixing LED street light approx length not less than 1.20 mtr bent to shape complete all as specified and directed.

M&L for fabrication of Main receiving Station Glow Flex Board having detail layout of electric supply network of size complete all as specified and directed.

M&L for fabrication of Main pump house Glow Flex Board having detail layout of water supply network of size complete all as specified and directed.

Supply and topup only new dehydrated Engine/lubrication oil as per required grades suitable for 10KVA to 630KVA DG set and fire diesel engine of complete all as specified and directed.

Supply and topup only coolant/inhibitor corrosion antifreez suitable for 10KVA to 630KVA DG set and fire diesel engine of complete all as specified and directed.

Comprehensive maintenance/ Servicing of Hydroextractor including of greasing and lubrication of motor and bearing and pulley and cleaning complete all as specified and directed.

S&F in replacement of strip heater of 2kW for hydroextrcator having fins shaped or as per existing complete all as specified and directed.

S&F in replacement of the unserviceable contactor 3/4 pole of AC1 rating 160 Amp or as per existing rating and 220 V/415V coil rating complete with all new wiring including thimbles and lugs,nuts and screws complete all as specified and directed.

S&F in replacement of the unserviceable timer switch suitable for 240/415 Volts 3-30 Sec, 50 Hz complete all as specified and directed.

S&F in replacement of worn out / defective single phase preventor suitable upto 75 HP star- delta starter 415 V, 50 Hz, complete all as specified and directed.

S&F in replacement of worn out / defective thermal overload relay with range 78-130A Amps 415 V, 50 Hz, complete all as specified and directed.

S&F in replacement of Butterfly valve 100mm, complete all as specified and directed.

S&F in replacement of Pressure switch Universal type complete all as specified and directed by Engr-in-charge.

S&F in replacement of Pressure gauge 4"dial 0-14 kgs rating complete all as specified and directed by Engr-in-charge.

S&F in replacement of Fire brigade inlet connection 2way including rubber gasket and nut bolts complete all as specified and directed.

S&F in replacement of fire hydrant valve single headed including rubber gasket and nut bolts complete all as specified and directed.

S&F in replacement of 24V DC 10A Charger for battery to power self starter including wiring as per existing complete all as specified and directed.

S&F in replacement of ESR relay including wiring as per existing complete all as specified and directed.

S&F in replacement of fire extinguisher foam type 9 ltrs capacity complete all as specified and directed.

S&F in replacement of fire extinguisher dry powder ABC 6 Kg capacity IS:15683 Stored Pressure complete all as specified and directed.

Supply, Install, testing & commissioning in replacement factory made indoor type dust and vermin proof Automataic phase sequence corrector panel board of size not less than 1.5m x1.5m x 1.0 m of suitable size 415 volts, AC 50 Hz fabricated of CRCA sheet 2 mm for load bearing and internal sheet of 1.6 mm thick machine pressed for non load bearing and angle iron frame 50 mm x 50mm x6mm grouted in PCC 1:2:4 type B1 (20mm graded stone aggregated) powder coated inside and outside complete including 4 pole Aluminium busbar of capacity 1000 Amps mounted on porcelain insulators and enclosed in chamber and connection from incoming and outgoing electric cable with suitable size thimbles/lugs cable gland with openable shutters on both side with the followings switchgears:- Note: Contractor will provide Panel drawing for approval of Engr-in-charge before placing order.

INCOMING:-

ACB 1000A, 4 pole, 415 V, 50 Hz AC, 50 KA microprocessor release - 02 Nos

Phase monitoring relay -01 No.

Undervoltage release-02 Nos.

Shunt release -02 Nos.

Lockable trip push button- 01 No.

Digital Multifuntion meter Voltage, Ampere, frequency- 02 Nos.

1000/5A CL-1 5VA CT- 06 Nos.

CT Shorting Link- 06 Nos.

Control MCBs 6Amp SP- 06 Nos.

RYB Indication lamps- 06 Nos.

Neutral Link- 02 Nos.

Copper wiring of feeder complete.

TARA ENTERPRISES

M/S kuldeep kumar khullar

LOVELY AIRCON SYSTEMS

Northern cable fault locatoers