NIT09/2022-23

Amount

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. As per CSR item 8.26

a1.01) Doors of area 3 sqm and below As per CSR item 8.26 (a)

(b) Windows of area 3 sqm and below As per CSR item 8.26 (b)

(c) Clerestory windows of area 3 sqm and below As per CSR item 8.26 (c)

12.5 mm thick cement plaster 1:5 As per CSR item 15.10

Extra for providing and mixing water proofing material in cement plaster work @ 1 kg per 50 kg of cement As per CSR item 15.47

Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete As per CSR item 15.24

(a) Doors and windows frame of size 118mm x 60mm with 40 mm wide single rebate weighing 3.43 kg per meter. As per CSR item 15.24 (a)

(c) Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter. As per CSR item 15.24 (c.)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In- Charge. (Glazing and paneling to be paid for separately) As per CSR item 17.45

a)For fixed portion and chaukhats As per CSR item 17.45(a)

(b) For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required .s per CSR item 17.45(b)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Pre-laminated particle board with decorative lamination on one side.s per CSR item 17.46(i)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) (ii) Float glass panes of 4mm thickness s per CSR item 17.47(ii)

Providing & fixing 150 X 10 mm anodized aluminum Mat Finish tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge s per CSR item 17.87

Providing & fixing 125mm with Plate 175mm X 32 mm anodized aluminum Mat Finish handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge s per CSR item 17.82

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. (a) Size 600x600 mm s per CSR item 14.113(a)

Scraping (a)White wash & Colour wash. s per CSR item 8.31a

White washing (two or more coat) s per CSR item 16.2

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish s per CSR item 16.65

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats on old distempered work when shade is changed. s per CSR item 16.12

Cement concrete 1:3:6(a) with stone ballast or shingle(i) mixing by manual means as per CSR item 10.12a(i)

Cement concrete 1:2:4(a) With stone ballast or shingle (i) mixing by manual means as per CSR item 10.13a(i)

NS Item

Providing & fixing of wire gauge 140 G gauge complete in all respect ( N.S ITEM)

Re-fixing of existing door shutter FOR NS ITEM

Bidder Name

Amount in Words

rattan builders pvt ltd

NARENDER SINGH CONTRACTOR

M/S JSB ENTERPRISES

rattan builders pvt ltd

M/S JSB ENTERPRISES