Construction of Office Building for Construction Division, Saifabad Section and Civil Sub-Division

Dismantling of Reinforced Cement Concrete including stacking of serviceable materials and disposal of unserviceable materials with 100 metres lead including all operational, incidental, labour charges etc. complete for finished item of work

Dismantling/chipping of plastering on slab/brick work including stacking of serviceable materials and disposal of unserviceable materials with 100 metres lead including all operational, incidental, labour charges etc. complete for finished item of work

Providng impervious coat to exposed RCC roof slab surface with CM(1:3), 20 mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item of work 1st Floor

Laying Plain C.C(1:2:4) nominal mix using 20 mm HBG metal incldg cost & conveyance of all materials mixing, curing, all labour charges,etc comp for finished item of work.

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

RCC Lintel GF: M20Gr, Steel centerng

RCC Sunshade GF: M20Gr, Steel centerng

Brick masonry in cement mortar (1:6) for superstructure using well burnt country made second class bricks of approved quality including cost and conveyance of all materials curing, scaffolding with all leads and lifts etc., complete for finished item of work - Ground Floor

Plastering of 20mm thick to all uneven faces of walls of superstructure in two coats with base coat in CM 1:5 of 16mm thick and top coat in CM 1:3 4mm thick with dubara sponge finish including cost and conveyance of all materials, water, all labour charges, curing for specified number of days, cutting grooves, all leads, lifts and scaffolding charges,all incidental charges etc. complete for finished item of work and as directed by the Engineer - in - charge. Ground Floor

RCM rack 25mm thick in CM (1:3) with nominal reinforcemet as directed by Engineer-in-change with 12 mm plastering 2 coats in 1:4 & 1:2 cm both sides & dubara sponge finishing, including cost & conveyance of all materials to site, sales & incidental, cost and conveyance of cement, water to work site, centering, scaffolding and form work, lift changes etc., complete for finished items of work but including cost of steel & its fabrication charges, for finished item of work. (APSS No.403 & 903)

Flooring with vitrified tiles 600x600 of 1st quality, set over base coat of cement mortar (1:8) 12 mm thick over CC bed already laid or RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & jointed with neat cement to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand, water and tiles etc., complete for finished item of work

Providing skirting to internal walls to 15cm height/risers of steps with vitrified tiles length equal to floor tiles, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like marble slab, cement, sand, water etc., complete for finished item of work

Flooring with cermic tiles of set over base coat of cement mortar (1:8) 12 mm thick over CC bed already laid or RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand, water and tiles etc., complete for finished item of work

Providing skirting to internal walls to 15 cm height/risers of steps with ceramic tile length equal to floor tile, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like Shahabad stone, cement, sand and water etc., complete for finished item of work

Supply and fixing in position of doors with MT Wood Frame with Flush Door Shutter 35mm thick with 9 mm laminate of approved quality and design and fitted with teak wood lippings around duly polished/synthetic enamil paint including all operational, incidental, labour charges etc. complete for finished item of work

Supplying & fixing collapsible steel shutters with vertical, double channel of 20 x10x2 mm of 100 mm centre ,Bracers with flat iron 40x40x6mm with 38 mm Diameter steel pulleys, the top,bottom and side vertical frames of the collapsible gate with 65x65mmx8mm MS Angle and middle guide rail at site height with 65mmx8mm MS flat for the pulleys to guide and fixed with necessary hold fasts, bolts, nuts, rivets, locking arrangements, stoppers, handles, all accessories all fixtures and painted with one coat of approved steel primer etc., complete for finished item of work as per specia lSpec1105

Supply and fixing powder coated Aluminimum Anodised Two Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no. of screws, bolts and nuts and includingt labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work.

Supplying and fixing of MS safety grill with peripheral frame of ISA 25x25x4mm and 8mm square rods at 100mm c/c both in horizontal & vertical direction including cost and coveyance of all mateirals with all leads and lifts, labour charges, painting charges complete for finished item of work

Painting to walls with 2 coats of ready mixed oil bound wahsable distemper with primer of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work.

Painting to new walls with 2 coat of plastic emulsion paint of approved brand and shade over a coat of primer after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for External walls Ground Floor

Supply and erection of MS pipes for horizontal members, purlins including cost&convayance, fabrication charges etc complete for finished item of work.

Supply and erection of roofing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. , with Regular Range Colours including cost&convayance,fabrication charges etc complete for finished item of work.

Supply and fixing of powder coated aluminimum Partition partly glazed as per drawing using standard powder coated / anodised aluminimum section of 62.5 x 44.45 x 3.18 mm thick fitted with 12.0 mm thick Particle Boards - Prelaminated and with 5.0 mm thick plain glass glazing fitted with suitable Aluminimum glazing clips and aproved brand silicon sealant including cost and conveyance of all materials labour charges for manufacturing fixing in position using wooden blocks and sheet metal screw etc. to complete for finished item of work as approved by Engineer-in-charge

Supply and fixing Aluminium Anodised Doors - Single Shutter (partly glazed & partly panneled)as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 14021 of size 101.6 x 44.75 x 2.40 mm, Shutter frame top of size 44.45 mm x 47.62 mm x 1.95 section 19571 , bottom of size 44.45 mm x 114.30 mm x 2.15 section 19574 and verticals of 19569 of size 44.45 mm x 47.62 mm x 2.02 and Middle lock rail of 19525 of size 83.50 x 44.45 x 2.40 mm and fitted with 12mm thick both sides prelaminated cement particle board for shutter including supply and fixing aluminium handles of 125 mm for each shutter, Providing and fixing Cast Iron Body Bottle Type Hydraulic Door Closer (IS: 3564) with double speed adjustment assembly, aluminum door stopper and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work

Providing and fixing in true horizontal level 600 mm x 600 mm 15 mm thick Arm strong false ceiling system manufactured by M/s Arm strong world Industries using hot dipped Galvanised Steel section exposed surface with pre-coated capping, main Tee of size 24 x 27 mm at evry 1200 mm c/c maximum and rotary stiched cross tee of size 24 x 27 x mm at every 600 mm c/c and sub-cross tee of size 24 mm x 25 mm at 1200 mm c/c and wall angle of size 19 mm x 19 mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick per-straightened GI Wire laying fine fissured butt edge ceiling tiles of 15 mm thick mineral fiber Board manufactured by M/s Arm Strong World Industries Ltd., having RH 99% and for finished of size 600 x 600 mm including Cost & conveyance of all materials and labour charges such as cutting, fixing of standing of frame work exposing roof making complete for finished item of work

Supply and fixing of 25mm dia 1.5mm thick P.V.C. pipe (ISI MARK) Concealed in wall with all required accessories including masonary work and labour charges etc.complete.

Wiring with 2 runs of 14/0.3mm (1.0 sq.mm)Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A Modular Switch,ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light , bell , fan and exhaust fan points in Non-Residential Buildings.

Wiring with 2 runs of 14/0.3mm (1.0 sq.mm) P.V.C. insulated F.R flexible copper cable (ISI MARK) in existing pipe with 6A Modular Switch,control and 3/2 pin sockets fixing on separate board including all labour charges etc., complete.

Supply and fixing of batten holder /slanting holder in lieu of ceiling rose of light point complete with all connection and all labour charges with 40W bulb (for new installation)

Supply and Fixing of 1X20W LED retro tube light luminaire with copper choke,starter etc.,incuding 1No 20W tube etc., including all operational, incidental and labour charges etc. complete for the finished item of work.

Supply & Fixing of 9W LED Indoor Lamp with input voltage 90 to 300V, Colour temparature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base. Makes: Phillips / OSRAM /Crompton / Eveready / Bajaj/ Havells / Pharox / Halonix / Greenlites / IB LED/Jaquar / C&S / GM / Gold Medal / Million / Syska.

Supply and run of 2 of 14/0.3mm (1.0sq.mm) (FR) P.V.C. insulated flexible copper cable in existing pipe for mains including all labour charges complete.

Supply and run of 3 core of 2.5 sqmm from to Outdoor Split AC unit Sheathed Copper cable to Indoor Unit FR P.V.C. insulated flexible copper cable in existing pipe for mains including all labour charges complete Finolex/Polycab/L&T

Supply and erecting Electronic Regulator for ceiling fans 900/1200/1400mm sweep complete erected on existing board including all operational, incidental and labour charges etc. complete for the finished item of work.

Supply and fixing of 3 Nos 6A 2 in one socket modular with 2 Nos 6A 1 way modular switch control duly recessed in wall with 8 Module metallic deep box covered with frame on separate board including all labour charges etc., complete. (Anchor Roma/GM) For Computer Use ( 2nos switchs and 3nos sockets)

Supply & Fixing of 9" Light duty exhaust fan with metal blades etc including all operational, incidental and labour charges etc. complete for the finished item of worK Makes : Crompton / Havells Ventilair-DB / Orient hill air.

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Parryware make white glazed with 'S' trap including all operational, incidental and labour charges etc. complete for the finished item of work

Supplying and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 including all operational, incidental and labour charges etc. complete for the finished item of work

Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Single C.P. Pillar cock including all operational, incidental and labour charges etc. complete for the finished item of work

Supply & fixing of 15 mm brass body CP finish bib tap of not less than 300 grams weight with quarter turn spindle with either internal or external threaded connection conforming to IS 8931

Supply & fixing of 15 mm brass body CP finish pillar tap of not less than 500 grams weight quarter turn spindle conforming to IS 8931

S&F of Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with 1m long tubeand wall hook including all operational, incidental and labour charges etc. complete for the finished item of work

Supply and Fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) 22.20mm OD Pipe - SDR 11 including all operational, incidental and labour charges etc. complete for the finished item of work S&F 22.20mm OD CPVC Pipe - SDR 11

Supply & fixing of PVC low level system parry ware, slim line with internal components & short bend: 10 Litres capacity Dual Flush including all operational, incidental and labour charges etc. complete for the finished item of work.

S&F of 110 mm dia - Door Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar or any ISI Brand) including all operational, incidental and labour charges etc. complete for the finished item of work.

Supply and Fixing of 110 mm dia 3 M Single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar or any ISI Brand including all operational, incidental and labour charges etc. complete for the finished item of work.

Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work

S&F of 4" (101.6 mm ) Nahany Trap ( Without Jali with inlet)UPVC/SWR Pipe fittings (Prince/Sudhakar or any ISI Brand) including all operational, incidental and labour charges etc. complete for the finished item of work

Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x 457 .2 mm including all operational, incidental and labour charges etc. complete for the finished item of work

S&F CP finish steel towel rod of 600 mm long and 20 mm dia with brackets including all operational, incidental and labour charges etc. complete for the finished item of work

S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type -25 mm NB Size including all operational, incidental and labour charges etc. complete for the finished item of work

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but with NECESSARY fittings & base support for tanks including all operational, incidental and labour charges etc. complete for the finished item of work

Seigniorage charges for Sand

Seigniorage charges for M-Sand

Seigniorage charges for Metal