Construction of Anganwadi centres at various places of Silvassa project (27 places)

Amount

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(C) Hard Murrum

Providing material and labour for filling in foundation and plinth with RUBBLE under floors including filling gravel in gaps and consolidating deposited layers by ramming water etc. complete.

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand broken stone aggregates 40 mmnominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth.

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth (upto 10 ton)

Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete. (upto 10 ton)

Providing formwork of First class ply wood timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (A) Foundations Footings Bases of Columns etc. and Mass concrete.

Providing and laying controlled cement concrete M.250 exposed work with curing etc. complete including the cost of formwork but excluding the cost of reinforcement for R.C.C. work in (B) COLUMNS:(ii) Having cross-sectional area more than 0.08 Sq.M and upto 0.18 Sq.M

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering.

Providing material and labour for filling in plinth WITH UNSCREEN GRAVEL under floors including watering, ramming consolidating and dressing etc. complete.

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional (upto 10 ton)

Providing material and labour for Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in superstructure upto floor two level. in Cement Mortar 1:5 (1- Cement : 5 -fine sand)(B) Conventional.

Providing material and labour for Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in superstructure above plinth level upto floor two level (B) Conventional.

Providing and laying controlled cement concrete M.250 exposed work with curing etc. complete including the cost of formwork but excluding the cost of reinforcement for R.C.C. work in (A) BEAMS :(ii) Having cross-sectional area more than 0.08Sq.M and upto 0.12 Sq.M

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork but excluding the cost of reinforcement for reinforced concrete work in (C) Slabs,landing,shelves,Balconies Lintels, Beams, Girders and Cantilever upto floor two level. (more than 10 ton)

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork but excluding the cost of reinforcement for reinforced concrete work in (C) Slabs, landing, CHHAJJA, Balconies Lintels, Beams, Girders and Cantilever upto floor two level.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheating of steel sheets but excluding the cost of reinforcement for reinforced concrete work in (C) Slabs, landing, Chhajja, Balconies Lintels, Beams, Girders and Cantilever upto floor two level. (more than 10 ton)

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level (upto 10 ton)

Providing material and labour for 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished even and smooth in (i)Cement mortar 1:3 (1-cement:3-sand)

Providing material and labour for 20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Providing material and labour for laying water proofing over R.C.C. SLAB consisting first Layer of special water proofing compound 1 kg/10 sq.mt. mixed with Cement slurry spreaded over maked slab and second layer of leveling Coarse of c:m 1:3( 1 cement :3 fine sand ) of 25mm (a.v.) bed thickness. Third layer consisting of brick aggregates of 75mm (av.) thickness mix with 50% cement mortar 1:3 for joint filling and top finish having 10mm average thickness and exposed top smooth finishing with cement slurry including making false chequired 300mm x 300mm in size. The treatment is to be carried alongwith the vertical surface of the parapet and other joining wall upto height of about 200mm in a shape of quarter round vata including curing etc. complete as per specification. UPTO FLOOR TWO LEVEL. Water proofing compound having I.S.I MARK of ISO make should be used wherever cement used and no extra payment will be made for vata, curvature etc. only flat surface area will be consider for payment.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade

Providing and fixing FRP of 28mm thick Fibre Glass shutter with 1.5 to 2.0 mm thick fire retardent grade FRP skin in depressed panel design having extra reinforcement on sides & edges & in Gel coat finish. The core of the shutter is to be filled up with injected retardent grade polyurethane foam done in situ alongwith embedded wooden pieces for stiffening & also taking hinges & fintures. The whole FRP frame & shutter is to be water proof ,weather proof, termite proof & resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges with necessary screws & alluminium S.S fixtures & fastenings & fastener sleeve.

Providing material and labour for fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws, with Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS :2046 Type S, including cost of adhesive of approved quality 1.0mm Thick on both face, with Providing and fixing S.S. tower bolts (barrel type) with necessary screws etc 200mm long x10mm dia, with Providing and fixing S.S. Door Aldrop with necessary screws etc. 300mm long x16mm dia, Providing and fixing S.S. Door Aldrop with necessary screws etc 250mm long x16mm dia, with Providing and fixing S.S. Pipe Handle for door 18"-24" size on both side of Door shutter, with Providing and fixing S.S hanging type floor door stopper with necessary screws, etc. complete as directed by Engineer in charge. All S.S Shall be ASIS 304 Grade.

Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 95mm x 24mm x 1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track member size 92mm x 31.75mm x 1.30mm (of Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size 40 mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass in two shutter and S. S. mosquito jali in one shutter with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc

Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm (Jindal Section :2434, @ Wt. 0.643 Kg/mt) with colour Powder Coated alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for Ventilation

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for light shade (Make:- Johnson, Kajaria, Asian, RAK, NITCO).

Providing and laying 24" x 24" vetrified 8mm thick over 12mm thick bed of cement mortar in 1:3 (1 cement: 3 coavse sand) in skirting risers of steps and dedo by adhesive material including dismentalling of existing surface and jointed with colour cement slurry including finished with flush painting & cleaning the surface etc complete for light/Dark shade as directed, Engineer in charge. (Make:- Johnson, Kajaria, Asian, RAK, NITCO).

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for antiskit (upto 10 ton) (Make:- Johnson, Kajaria, Asian, RAK, NITCO).

Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws. (B) ORNAMENTAL GRILL (upto 10 ton)

Painting three coats (including priming coat) on new steel and other metal surface with synthetic enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.

Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded stone aggregate 20mm nominal size) laid in one layer and finished with a floating coat of neat cement. (B) 50mm thick.

Supply & Installation Softboard paneling made of fabric of high quality & foam, which is washable, scratch resistance and fire retardant properties on 6mm thk. ply/softboard backing. Aluminium trim to be installed all arounf the softbaord paneling as per design & detail and as directed by Engineer-in-charge. (ALTOP OR EQUIVALENT)

Applying two coats of Birla (white cement based) or Asian (acrylic lapy- putty) or equivalent & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.

Providing and applying two coats of Acrylic emulsion paint of Asian/ICI/Berger make to all internal walls and ceilings, of approved colour over a coat of primer including preparation of surface by thorough cleaning and wetting and applying ready made putty of "Altek" or "Wall Care" or equivalent as per manufacturer specification fully to give a smooth and even surface before painting and curing as per manufacturers specifications and as directed.

Providing material and labour for Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete (Make:-Asian/ICI/Berger/Dulex of Nerolac)

Providing material and labour for construction of Kitchen Platform (0.75m wide) made from Black Granite (16mm to 18mm thick) in top of kitchen platform rested on black kadapa stone (av.30mm thick) supported on sandwiched vertical supports of Kadapa Stone bottom of granite stone for base of platform, at required distance or as directed by Engineer-in-charge. One side vertical granite stone in geometrical shape, front granite stone patti for fascia work as well as horizontal boarders including molding and mirror polishing by hand grinder to all exposed black granite edges and providing opening of required size and shape of kitchen sink in granite and kadapa stone in line and level. The vertical supports of kadapa stone sandwiched/ gap fill up with cement mortar 1:1 and cement slurry and the granite stone vertical side and patti etc with adhesive material like Araldite etc complete as directed by Engineer-in-charge.

Providing and laying PLINTH PROTECTION including excavation of 30cm. Depth and filling with Brick bats of 20cm. Thick and C.C. 1:2:4 ( 1 cement :2 coarse and :4 graded stone aggregate 40mm nominal size) of 10cm. Thick and top layers of C.C. 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregates 20mm. Nominal size ) of 50mm, thick including finishing top surface with floating coat of neat cement slurry.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork and reinforcement for reinforced concrete work in (B)Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. from top of foundation level upto floor two level.

paproviding material and labour for painting Artistik work as approved by Engineer in charge with synthetic emamel paint of approved brand and manufacture of required colour on wall surface etc. complete.

Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (A) vitreous China Pattern :(i) in white colour and Providing and fixing plastic seat and cover for wash down water closer with C.P. brass hinges and rubber buffers. White plastic seal and cover. Providing and fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild brackets, complete with fittings such as lead valve less syphon, 15mm nom.nal size brass ball valve with polythene float, C.P brass handle unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes in walls and making good the same connecting the flush bend with cistern and closet Vitreous China (I) In white colour (Make:- Jaguar, Hindware, Cera, Parrywar Roca, Neycer, Bell)

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including sutting holes and making good the same including fittings (CP Brass Waster Coupling 32 mm dia, Pillar cock 15 mm dia PVC Inlet pipe and Waste pipe 32 mm dia and Angle cock 15 mm dia. (A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour. (Make:- Jaguar, Hindware, Cera, Parrywar Roca, Neycer,Bell)

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the following nominal diameter of self cleansing design with C.I scread down or hinged grating including the cost of cutting and making good the walls.

Providing erecting and fixing double coated syntex PVC (ISI) water tank of required capacity each with all necessary fittings and connection etc. Complete on terrace.

Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap polished bright. (i) 15mm dia. (Make:- Jaguar, Hindware, Cera, Parrywar Roca, Neycer, Ocean, Cray, Jaqual)

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing and fixing chromium plated brass half trun flush cock concealed of approved quality including fixing in pipe line etc. complete.(ii) 25mm dia. (Make:- KK/Kmor approved )

Providing and fixing Gun metal check or non-return fullway wheel valve.(C) 25mm dia.

Providing material and labour for Construction of B.B.Masonary Kundi of clear inside dimension size 0.60m x 0.45m x 0.45m width 23 cm thick B.B.Masonary wall in C.M. 1:6 including required excavation C.C.1:5:10 15cm thick refilling 12mm thick cement plaster to masonary and floor C.C. layer and fixing R.C.C. cover of size 0.60m x 0.46 cms with frame and white/colour wash etc. complete.

(B) Providing sock pit of 5.00 Cu.M. Volume including excavating and filling brickbats with dry masonry work at top for 45cm. height including covering the top with stone including providing vatas in C.M. 1:3 with finishing curing etc. complete as directed.

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.

Providing and fixing ball stop cock of approved. quality as directed.(B) Abonite (i) 15mm dia

Providing and fixing ball cock of approved quality as directed (B) Abonite 25mm dia.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit,/Cassing capping with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. Group A

Point wiring for looped PLUG with tissino type single pole ISI marked 6 A. Switch and 6 A Socket erected with necessary connections erected on polished wooden block/Metal/PVC Box covered with 3 mm thick laminated sheet for open / concealed wiring. Make of plug: ISI/Anchor/MK/Toyoma/LK

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (Make:- Havekk's, All Cab, V-Guard, Polycab or equivalent).

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire (Make:- Havekk's, All Cab, V-Guard, Polycab or equivalent).

6 amps. to 32 amps. ratings , SP MCB, "C" curve, 10 KA breaking capacity

Providing and erecting Three pole MCB isolator A.C. 22 duty confirms to IS 13947-3 in existing box. (a) for 40 Amp. Cat. III

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) (F) Single phase 8 way SS Double door

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying of One Nos SP 16 A Switch & one no 6/ 16 A Universal Socket combined with indicator & fuse

Providing and erected Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 230 V. 50 c/s 1200 mm sweep complete, canopy and 30cms. Down rod erected on existing hook or clamp with 24/0.2, 3 core flexible wire with earthing. [ Make shall be approved by Engineer in charge ] Make:- Usha, Cromton, Bajaj, Khaitan or equivalent

Providing & erecting fresh air fan 250 mm dia with square frame make of ABS body with louvers - Cat.II Make:- Usha, Cromton, Bajaj, Khaitan or equivalent

Providing and erecting Decorative Box type with plastic /Polyester covere fluorescent fitting with Electronic Ballast, finished with anti - rust treaded white stove enamelled with end plates and holders with erection on site with lead wire and connections with 1 tube 40 watt. 120 cms and adapter if required.

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD < 10 %, CCT 5000 K to 5700K, Uniformity ratio >0.45, Luminaire efficiency> 85 lumens/watt . LED driver efficiency > 85 %. CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED used for luminaire. ( Each fittings required LM-79 & LM-80 certificates) (A) Street Light (IP-65), Surge -4KV (e) above 48 to 60 watt

Providing and fixing compound gate of 40mm dia G.I. Pipe (class – B) and 20mm dia G.I. Pipe vertical at 120 mm C/C. Providing M.S. Angle of 40 x 40 x 3mm center below 300mm wide M.S. plate of 3mm thick including fixture and fastening and fixing in position in plumb including applying priming coat of red lead point and two coats of approved quality oil paint etc. complete as per drawing and direction by Engineer in charge.

Providing and laying controlled cement concrete M.200 exposed work with curing complete including the cost of formwork to give fai finish but excluding the Cost of reinforcement for reinforced concrete work in (D) round Columns or any other Geometric shape etc complete as directed by Engineer-incharge.

D.B.Infratech