Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.8 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹28.9 L+₹1.4 L (5.27%)Rejected-AOC | L2 | Rejected-AOC Other than Lowest Bidder | |
| 3 | L3₹34.5 L+₹7.0 L (25.6%)Rejected-AOC PLOT NO 39 SHRI SHIVE NAGAR 05 MOTI BANDHA MACHEDA HARMADA JAIPUR 302013 RAJ | JAIPUR | JAIPUR | RAJASTHAN | 302013 | L3 | Rejected-AOC Other than Lowest Bidder |
Tender Value
₹31.6 L
EMD Value
₹63,200
Closing Date
24 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (South) Jaipur
Garrison Engineer (South) Jaipur Military Engineer Services Kalyan Marg, Jaipur302006
SPL REPAIR 03 X TOILET BLKS (09 TOILET) IN BLDG NO P-262 OF GRND IN ZONE-III AREA UNDER GE (S) JAIPUR AT JAIPUR MIL STN
2022_MES_554969_1
GE (S)/J-38P /2022-23 8760/E8
Open Tender
Civil Works
Item Rate
270 days
Jaipur
Class D and above
category a (i)
9 documents required · 9 mandatory
₹500
GE (S) Jaipur
₹63,200
Yes
23 Nov 2022
28 Sept 2022
26 Oct 2022
28 Sept 2022
24 Oct 2022
11 Oct 2022
Amount
Taking down cement plaster , any description on brick or stone walls, etc including raking out joints, hacking for key scrubbing down with water etc built in CM complete all as specified.
M&L rendering 15 mm thick on stone masonary surface surface other surface than fair face of brickwork in CM (1:6) complete all as specified.
M&L rendering 15 mm thick on stone masonary surface or surface or other sureface fair face of brickwork in CM (1:4) complete all as specified.
M&L for rendering 10mm thick in cement mortar 1:3 on concrete surfaces including finished even & smooth without using extra cement on ceiling complete all as specified.
M&L for preparation of new plastered surfaces of wall and applying three coats of white wash on walls complete all as specified.
M&L for preparation of new plastered surfaces of Ceiling and applying three coats of white wash on Ceiling complete all as specified.
M&L applying two coats of cement base paint white or tinted on new wall surface including preparation of surface complete all as specified.
M&L for preparation of Old plastered surfaces of wall and applying two coats of white wash on walls complete all as specified.
M&L for preparation of Old plastered surfaces of Ceiling and applying two coats of white wash on Ceiling complete all as specified.
Taking down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified.
Taking down Chowkats or frames exc 1.5 sq. but not exceeding 4.0 Sqm each with shutters (without taking off shutters from the frames) complete all as specified.
S&F Factory Made Solid PVC Moulded Door Shutter With Wood free EPS , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawingcomplete as per manufacturers specification and direction of Engineer-in-Charge.
S&F 35mm thick IInd class hard wood factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.
M&L Steel ventilator with top hung shutter including hinges, steel peg stay, complete complete all as specified.
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay with glazing bars, dovetailed or welded complete all as specified.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified.
Applying two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces of any description, not otherwise , described, over 10cm width or girth including preparation of new surface complete all as specified.
Applying two coats of synthetic enamel paint over one coat of red oxide primer on new steel & Iron surfaces of any description, not otherwise , described, over 10cm width or girth including preparation of new surface complete all as specified.
S&F Butt hinges 100mm size medium weight cold rolled stainless steel complete all as specified.
S&F Aluminium anodised, barrel tower bolts 150mm long of extruded section and fixed complete all as specified.
S&F Aluminium handles, cast type, anodised 125mm size complete all as specified.
S&F Aluminium alloy, anodised, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 300 mm long complete all as specified.
S&F sheet glass 4mm thick, plain ordinary quality & glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified.
S&F in repair Viterous China squatting pan, 'Orrisa' pattern size 580x440mm white with integral foot rests (excluding flushing cistern & flush pipe) including Provn of PCC bedding complete all as specified.
S&F in repair European Water Closet (Padestal pattern) complete including white colour plastic seat with seat cover with flat bottom open recessed and CP hinging device complete all as specified amd directed by Engineer-in-Charge.
S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets 10 Ltrs capacity complete all as specified.
Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches/wall if required, internal dia of pipe100/ 75mm complete all as specified.
S&F Cast iron 75mm bore sand cast soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified.
S&F Cast iron 100mm bore sand cast soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified.
S&F Cast iron 75mm bore sand cast soil, waste and vent pipes in any length with or without ears, with cement joints, but fixed to wall complete all as specified.
S&F Cast iron 100mm bore sand cast soil, waste and vent pipes in any length with or without ears, with cement joints, but fixed to wall complete all as specified.
S&F in repair Cast iron 75mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) diminishing pieces or tapers (larger bore meassured) complete all as specified.
S&F in repair Cast iron 100mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) diminishing pieces or tapers (larger bore meassured) complete all as specified.
S&F in repair cast iron 75mm bore branches pieces single (equal or unequal) ordianry or inverted (spigot or socket type) or with parllel branches complete all as specified.
S&F in repair cast iron 100mm bore branches pieces single (equal or unequal) ordianry or inverted (spigot or socket type) or with parllel branches complete all as specified.
S&F in repair Cast iron 100mm bore cowls complete all as specified.
M&L in repair Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified.
S& F Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) 3 layer hoisted and fixed in position connecting with inlet/outlet pipe etc complete all as specified in SSR Part I 1000 ltrs capacity including dismantalling old u/s water tank complete all as specified.
M&L Ball brass valves,20mm bore high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified.
S&F in repair 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed but but fancy type complete all as specified.
S&F in repair stop valve 15mm , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixe fixed in repair complete all as specified.
S&F in repair stop valve 20mm , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixe fixed in repair complete all as specified.
Dismantling and taking up or down the existing unserviceable GI pipe and M&L for new galvanised 15mm bore steel water tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified.
Dismantling and taking up or down the existing unserviceable GI pipe and M&L for new galvanised 20mm bore steel water tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified.
Dismantling and taking up or down the existing unserviceable GI pipe and M&L for new galvanised 25mm bore steel water tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified.
M&L Framed work as in doors frame 40x40x6mm or any other section or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and uides) and hanging; also fastening and fixing complete complete conforming to Fe 290 Gde E-165 all as specified.
S&F MS (any section) Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.
S&F Coloured Glazed ceramic tiles size 300x400x7 mm thick on walls etc in the combination of light and dark shade concept , set & jointed in neat cement slurry & pointed in white/coloured cement to match over 10mm thick plaster in cement mortar (1:4) as specified.
M&L for coloured Non Skid Ceramic tiles joint free 7 to 8mm thick (Square/Rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 Sqm , in floors etc set and jointed in neat cement slurry or tiles addeshive and pointed in white or coloured cement to match over and including 15mm thick screed in cement mortar (1:6) as specified.
M&L Chromium plated Overhead Rain shower with relvoling joint and 115mm long shower arm with wall flange 15 mm bore fancy type any colour half turn fixed in repair complete all as specified.
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified.
M&L 50 mm thick PCC type C-1 (1:3:6) using 20mm graded stone aggregate finished even and smooth without using extra cement as in plinth protection complete all as specified.
Water Proof Treatment to RCC Roof comprises the following, complete all as specified and as directed by Engr-in-Charge:- (a) Complete removal of existing roof treatement and disposed off the rubbish outside the defence land (b) All visible cracks to be opened up in V shape cleaned properly with wire brush washed and filled with cracks filling compound using cracks upto 15mm width of cracks (c) cracks of 15mm width are filled with URP cement grouting by injecting nozzles by authorised applicator of manufacturer carefully by following manufacturer's instructions (d) after drying one coat of (Home shield or from equivalent make as given below) roof coat paint shall be applied with roller in both directions with a gap of 12 hrs @ 1 Ltr per Sqm (each direction) of roof coat over a roof priming coat of 0.5 Ltr of water mixed to 1 ltr of roof coat (e) necessary gurantee for 5 years shall be submitted by the contractor Make: Berger Paints (Damp shield elasto) or equilent of other make/brand viz Sika/ Asian Paints (Except Smart care Damp Proof)/ IWL/
Demolition of Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified .
M&L for brick work with subclass 'B' old size bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified.
M&L for brick work with subclass 'B' old size bricks, straight or curved on plan any radius in half brick thick wall built in cm 1:4 complete all as specified.
M&L for brick work with subclass 'B' old size bricks, straight or curved on plan any radius in half brick thick wall built in cm 1:4.but except brick complete all as specified. Note : Serviceable Bricks obtained from demolition under item No 56 shall be revised under this item.
S&F in repair Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern in repair complete all as specified.
S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified.
S&F in repairs Vitreous China wash basin fixed on and including granite slab counter top 650mm X 650mm (for one WHB) with cutting holes , white, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets & waste fittings 32mm bore complete all as specified.
S&F Pillar taps, fancy type 15mm bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified.
M&L Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe and complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc complete to match with existing as specified PVC
M&L Point wiring complete with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and unsheathed cable enclosed in concealed rigid conduit 20 mm dia medium grade by providing new rigid conduit with all accessories ISI marked, including MS sunken box for mounting fitting like switches, sockets fan regulators modulor type etc. including 1.5 sqmm single core PVC insulated but unsheathed copper earth continuty conductor to common earth and connected FRLS cable 1100 V grade as continuous earth wire to earth dolly for followings:-
One light/fan/ bell point controlled by one, one way switch.
One 3 pin 5 Amp socket outlet on same board with other switches.
One 3 pin 5 Amp socket outlet on independent board with other switches.
All as per Item No 67 above but with 4 Sqmm copper conductor cable for 3 pin 15 Amps socket outlet on independent board, including 2.5 Sqmm copper cable conductor continuous earth wire and connecting to common earth dolly.
S&F switch flush, piano type 230/250 volts of following type:-
Single pole, one way 5 Amp rating
Single pole, one way 15 Amp rating
S&F Socket outlet flush, piano type 230/250 volts of following type:-
Socket 5 Pin, 2 in 1, 05 Amp rating
Socket 3 Pin, 2 in 1 combination, 5 & 15 Amp rating
M&L Ceiling rose surface bakelite 65x50mm, three terminals or poly carbonate complete.
Supply & fixing lamp holder PVC body complete all as specified and directed with including 01xLED bulb 9 watt complete
Taking down u/s exhaust fan of any type and capacity for safe custody to reuse and deposited to MES store yard., complete all as specified and as directed by Engr-in-Charge.
Supply & fix Exhaust fan steel body AC single phase 230 V of size 300mm sweep heavy duty with blades and frame and louvers all as specified and directed, complete all as specified and as directed by Engr-in-Charge.
Supply & fix in repair LED retrofit lamp ( size-4 feet), Regal Batten for LED tube, universal batten for T5 lamps surface/wall mounting IP 20 with twin core twisted flexible copper conductor cable with suitable size. Make - Havells cat No - REGALBATTENT5UPTO1X18WDSBSWH Or equivalent make as per Appx B
Supply & fixing in repair Mirror surface mounted LED fitting 14 W (2 Feet)provided with a high output PMMA diffuser for glare free light , IP 20 with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make - Crompton cat pt No- LCL-14-CDL or equivalent make as per Appx B
S&F in repair factory made, sheet distribution boards, SP&N 8 ways, double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps, copper bus bar complete.
S&F in repair MCB 10 KA confirming to IS-8828 : 1996, IEC-898 : 1995 rupturing capacity of the under mentioned type and rating :-
SP 5 upto 32 amps
SPN above 32 to 63 amps.
M & L Sub main wiring complete with 2 runs of 6 Sqmm single core PVC insulated unsheathed cable 1100 V grade with multistranded copper conductor ISI marked drawn through in and including PVC rigid conduit/and conduit accessories fixed on surface/wall celing etc including provision of 1 run of 4 Sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity including taking down old existing u/s sub main wiring complete. Note : 2x6 Sqmm+1x4 sqm and one run of conduite shall be measured as one unit RM.
Taking down old u/s Earthing and M&L providing earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm burried directly in ground (earth pit not less than 2.25 meters deep below normal ground level ), with top edge of the plate not less than 1.5 mtrs below normal ground level , connected to and including galvanised earth strip 25X 4 mm by means of galvanised iron bolts , nut and washers and connected to other end to main panel board duly protected by galvanised iron pipe 25 mm dia " light grage " earth plate surrounded by packed layer of coat dust and common salt 15 cm thick all around bottom and top watering pipe 20 mm bore of galvanised iron " medium grade " with funnel all as shown on electrical plate No 5 of SSR part -I and connecting to earthing testing on completion including cast iron cover frane and PCC 1:3:6 type C-2 using 20 mm grade stone aggregate as in earthing pit with cast iron cover and frame including necessary earth work etc complete all as per specified and directed by Engr-in-Charge . ( Note : PCC Chammer shall be constructed atleast 1.5 mtrs away form the earth electrode of the earth pit and pipe for watering shall be provided in slanting manner).
M & L for Supplying, laying, connecting and testing in trenches, under floors/ roads or on walls Cable XLPE insulated screened PVC bedded galvanized steel strips or wire armored, electric power cables (heavy duty) ISI marked with stranded aluminium conductor, 1100 volts grade, of size 10 sqmm, 2 core including taking down old US cables.
Excavation in trenches n.exc 1.5 metre wide and n.exc 1.5 metre in depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes, laying cables errection of poles / struts/stays etc n.exe 10 Sqm on plan not exceeding 1.5 metre in depth and getting out in soft/ loose soil.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm in soft/ loose soil.
Removing of excavated material (soil) to a distance n.exc 50 metre and depositing where directed at a level n.exc 1.50metre above the starting point
M & L Sand cushioning to PVC under ground cable with screened and washed sand and punning to provide a required cover complete as specified.
M&L bricks for protection cover to under ground cable (with old size sub class `B` bricks) with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent brick not exceeding 10 mm as specified.
Taking down old US geyser of any type and capacity and deposited to MES store yard.
S&F electric water heater storage type stain less steel body with copper inner tank and heating element upto 2 KW capacity 25 litre BEE 5 star rating complete with all accessories such as safety valve thermostate NRV connection pipe etc complete as specified.
Supply and fixing in repair of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps 240 volt complete as specified.
UNIVERSAL INFRAPROJECT PVT LTD
JAGDAMBA CONSTRUCTION COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .