SPECIAL REPAIR TO MARRIED ACCOMODATION AT CQAE BANGALORE

Amount

Roughening surface of old concrete floor by picking, sweeping, clean and washing down with water to remove dust etc and brushing neat cement slurry with 3kg of cement per sqm all as directed.

M & L Non skid coloured ceramic tiles 7 to 8 mm thick matt finish(square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile laid over screed bed 15 mm thick in CM (1:6) complete all as directed and specified.

M&L Glazed coloured Ceramic tiles of size 450X300X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in vertical surfaces over 10 mm thick rendering in CM 1:4 finished all as specified and directed.

M&L Non skid coloured Ceramic tiles 7 to 8 mm thick and area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15mm thick screed bed in cement mortar (1:6), all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, window-cills, cooking plat forms and like laid over 20mm thick screed bed in cement mortar 1:6, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granitsall as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in vertical surfaces including 15mm thick rendering in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granits, all as specified and directed.

Rounding to edges of granite slab such as cooking platform all as specified and directed.

M&L 75 mm thick cement concrete 1:3:6 type C1 using 20 mm graded stone aggregate for plinth protection finishing cement concrete surface even and smooth without using extra cement, all as specified and directed..

M&L for Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ for thickness of slab 100mm below, all as specified and directed..

M&L for brick work with sub class 'B' bricks , straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:6), complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius built in cement mortar (1:4) in half brick thick complete all as specified and directed.

M&L 10mm thick cement plaster in cement mortar (1:6) on brick work or concrete surfaces, finished even & smooth without using extra cement, all as specified and directed.

M&L 15mm thick cement plaster in CM (1:4) on brick work or concrete surfaces, finished even & smooth without using extra cement for external walls.

M&L for keyed pointing in Cement mortar 1:4 to random or polygonal rubble masonary including racking out joints, all as specified and directed.

M&L for Preparing the new surfaces of wall and applying two coats of oil bond distemper over a coat of 3mm thick interior wall care putty all as specified and as directed

Preparation of newly plastered surfaces and applying two coats of cement base paint on walls incl priming with alkali resistant priming paint etc complete all as specified and directed.

M&L for complete removal of existing wall surface finish and applying two coat of oil bond distemper over a coat of 3mm thick wall care putty all as specified and directed

M&L preparation of old wall surface and applying two coat of white wash all as specified and directed.

M&L for complete removal of existing surface finish and applying two coat of oil bond distemper over a coat of primer in ceiling all as specified and directed

M&L Preparing old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of Synthetic enamel Paint, all as specified and directed.

M&L Preparing old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of Synthetic enamel paint, all as specified and directed.

M&L for one coat of exterior paint to old decorated surfaces of wall including preparation of surfaces complete all as specified and directed.

S&F 20 mm dia of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls / ceiling or laying in floors, complete all as specified.

S&F CPVC pipes 25 mm dia SDR 11 & Plain VPVC SDR 11 fittings on walls/, ceiling or laying including fitting in floors all as specified and as directed.

S&F in repair gun metal globe with iron wheel head, secrwed both ends for iron pipes gate valve 20 mm bore, complete all as specified and directed.

S&F in repair gun metal globe with iron wheel head, secrwed both ends for iron pipes gate valve 25 mm bore, complete all as specified and directed. .

S&F in repairs vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm white with integral foot rests including provision of lime concrete filling surroung, complete all as specified & directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white premium quality (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed.

S&F Plastic pedestal pattern seat cover white closed pattern with flat bottom and cover and MS chormium plated hinging device all as specified and directed.

S&F in repairs 10 litre capacity PVC syphonic action type for low level flushing cistern white with inlet, ball valve, float and handle including brackets, flushing pipe and all fittings and fixed in repair, all as specified and as directed.

S&F in repairs vitreous china wash basin, white or coloured flat back, size 550 x 400 mm including brackets, all as specified and as directed .

S & F in repair Pillar tap 15mm bore fancy type chromium plated, with capstan head screwed down high pressure with or without lettered “Hot or cold” with long screwed shanks and fly nuts, screwed for iron pipe and fixed completed all as specified.

S&F in repair Bib taps chromium plated 15 mm with fancy type with capstan head handle screwed down screwed for screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified & directed.

S&F in repair 15mm dia, concealed type chromium plated fancy type with long shank and cup screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified & directed.

S&F in repair 15 mm dia two way bib taps (fancy type), cast copper alloy with with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete all as per Model F3002152 of make - CERA or equivalent in other makes.

S&F in repair 15mm dia angle valves, cast copper alloy, CP, screwed down, high pressure, with crutch, screwed both ends for iron pipe or for unions all as specified & directed.

S&F in repair Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to wall with all fixing arrangements of overall size 915x460mm and bowl size 410x330x160mm all as specified and directed.

S&F in repair sink cock fancy type complete all as specified and (table mounted) with 215 mm swivel spout complete all as per Model F2003302 of make - CERA or equivalent in other makes.

S&F Towel Rail (three Rail with lower hanger Hooks (stainless steel), fixed with screws , complete all as per Model Code No AHS-1581H of make - Jaquar or equivalent in other makes.

Supply and fix PVC Cabinet of size 600x450x125mm with mirror at top, all as specified & directed.

S& F in repair Brass chromium plated shower rose 125mm with or without swivel joints any size, including fixing to steel pipe or union of 15mm bore all as specified and directed at site.

S & F in repairs CP Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange as specified and as directed.

Supply and Fixing in repairs PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and as directed .

Supply and Fixing of 32/40mm dia PVC waste pipe for wash hand basin and sink, all as specified and as directed

S&Fin repair PTMT (Minium weight 190grms) towel rail 600 mm long fixed with and including chromium plated brass screws and wooden /plastic cleats fixed in repairs.

S & F corner glass shelf with assy of CP and fixed with Chromium plated brass screws and wooden/plastic cleats, complete all as per Cat Part No. ACN-1173 of make - Jaquar or equivalent in other makes.

S & F Liquid soap dispensar stainless steel fixed with and including Chromium plated brass screws and wooden/plastic cleats, complete all as per Cat Part No. ACN-1135N of make - Jaquar or equivalent in other makes.

S & F CP Towel ring of fixed with and including Chromium plated brass screws and wooden/plastic cleats, complete all as per Cat Part No. ACN-1121BN of make - Jaquar or equivalent in other makes.

S&F stainless steel Soap dish fix to wall, complete all as per Cat Part No. ACN-1131N of make - Jaquar or equivalent in other makes.

S&F Corner glass shelf of size 300x300mm, all as specified and directed.

S&F glass shelf of size 12 cm wide x 60cm long for wash hand basin, all as specified and directed.

S&F in repair brass CP Health faucet with 1.20m long flexible pipe and wall hook, complete all as specified and directed.

S&F Stainless steel Plate Rack 0.75 Mtr x 0.78 Mtr, complete all as specified and directed.

S&F PVC floor trap 75mm dia,plain with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4), all as specified and directed.

S&F PVC(SWR) Pipe 110mm dia single soketed, in any length with rubber ring joints, laid in trenches or in floors, all as specified and directed.

S&F PVC (SWR) bends 110 mm dia in any radius with access door, all as specified and directed.

PVC (SWR) pipes 75 mm single socketed in any length with rubber ring joints, laid in trenches or in floors and walls, all as specified and directed..

S & F PVC (SWR) bends 75 mm dia in any radius with access door, all as specified and directed.

S & F PVC (SWR) 75mm dia junction (single 'T') equal or unequal with access door, all as specified and directed.

S&F CP grating size 100mm fixed with white cement, all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 ltr capacity hoisted and fixed in position all as specified in SSR Pt - I including dismantling old tank and removing to store, all as specified and directed..

S&F in repair 25 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass in repair, all as specified and directed.

S&F in repair PTMT Nipple 25 mm suitable for HDPE water tank. (Minimum weight - 65gms), all as specified and directed. .

S&F in repair PTMT Nipple 20 mm suitable for HDPE water tank. (Minimum weight - 45gms).

M&L for taking down shuttes of any description exceeding 1 Sqm and not exceeding 2 Sqm, in cupboard shutters all as specified and directed.

M&L for taking down shuttes of any description exc 1sqm and n exc 2sqm each and refixing in the same opening all as specified and directed.

S&F II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.

Cutting holes in brick walls built in CM for inserting hold fasts and making good dismantled portion in CM 1:3 or PCC 1:2:4 (type B 1 ) using 12.5 mm graded aggregate ¸depth of embedded portion of hold fast not exceeding half brick

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, suppling & fixing edges will be painted to match with prelam sheet all as specified and directed.

M&L Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including neccessary fitiings etc complete all as specified and directed.

S&F powder coated aluminium frame with all fixing arrangements for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc aluminium section of powder coating not less than 50 micron, all as specified and directed.

S&F Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 No.) suitable handle (1No.) complete all as specified.

S& F flush door 30mm thick membrane doors decorative finish on one side duly finished and polished and other side all as per manufacturers directions as per tint / colour including necessary teak wood lippings, complete all as specified and directed.

S& F 30mm thick fly proof door membrane doors decorative finish on one side duly finished and polished and other side all as per manufacturers directions as per tint / colour including necessary teak wood lippings, complete all as specified and directed.

S&F 35mm thick second class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc divided into squares, with plain,chamfered or rounded,mitred and rebated sash bars,any numbers.edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats.

S&F for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 all as specified and directed.

S&F aluminium alloy anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheets , cast or extraded sections and fixing bolt and sliding bolts of extracted sections, complete all as specified and directed.

S&F for aluminium anodised, barrel tower bolt 150mm of extruded section, complete all as specified and directed.

S&F for aluminium handle 150mm cast type anodised, complete all as specified and directed.

Supply and fix floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate, complete all as specified and directed.

S&F Brass 300 mm ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.

S&F in repair Veneered decorative plywood 19 mm thick, grade 1 (with BWR resin) with decorative face veneers on both faces, fixed with screws to timber frame work, complete all as specified and directed.

S&F Continuous(piano) hinges, brass, bright finish of electrogalvanised 40 mm width of flap, complete all as specified and directed. .

Cover fillets of standard 6 mm thick hard board, 40mm wide and fixing with screws, complete all as specified and directed.

M&L preparing new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

S&F sheet glass ordinary quality 4mm thick and glazing with oil putty in square not exceeding 0.50 Sqm in each pane, complete all as specified and directed.

S&F 4mm thick figured glass pin headed and glazing with oil putty in square not exceeding 0.50 Sqm in each pane, complete all as specified and directed.

S&F sheet glass ordinary quality 4mm thick as in doors,window, showcase in aluminium frame work & similar work with or without glass roller area exceeding 0.50 Sqm including neoprime gasket, complete all as specified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm and fixed with stainless steel wire staples all as specified and directed.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and directed.

M&L Preparing new steel surfaces of any description over 10cm in width or girth , not otherwise described and applying two coats of Synthetic enamel Paint over a coat of red oxide primer all as specified and directed.

S& F for aluminium powder coated drapery rod 32mm dia fixed over 1st class hard wood rounded wooden blocks of 65mm dia and 20mm thick fixed to stone wall/Brick wall using screws incl necesary drilling & finished with polishing, all as specified and directed.

S& F aluminium powder coated fancy type suitablre brackets fixed at both ends of openings fixed over 1st class hard wood rounded wooden blocks 0f 65mm dia and 20mm thick fixed to stone wall/Brick wall using screws incl necesary drilling & finished with polishing all as specified and directed.

M&L 18mm thick WPC board for kitchen cabinets door, shelves, sides and back, one side white in colour and other side dark colour, all as specified and directed.

M&L Stainless steel handle 100mm size, D type, all as specified and directed.

M&L Stainless steel handle 150mm size, D type, all as specified and directed.

M&L Stainless steel self closing hinges, 50mm size, all as specified and directed.

M&L Stainless steel self closing hinges, 75mm size, all as specified and directed.

S&F Strainless Steel kitchen cup and saucer Basket of size 48 cm x 50 cm x 10 cm including telescopic channel fixed as drawers complete all as specified and directed. (In one set - 3 wire basket)

S&F Strainless Steel kitchen cup and saucer Basket of size 48 cm x 50 cm x 15 cm including telescopic channel fixed as drawers complete all as specified and directed. (In one set - 3 wire basket)

S&F Strainless Steel kitchen cup and saucer Basket of size 48 cm x 50 cm x 20 cm including telescopic channel fixed as drawers complete all as specified and directed. (In one set - 3 wire basket)

Material and labour Water proofing treatment of existing roofs after complete removal of existing water proofing treatment and expose of top surface of RCC slab of any thickness, any type by stripping out old tar felt over roofs, parapets, chimney stacks etc laid horizontally or vertically including taking out layer of cement plaster etc and cleaning the surface with water and using wire brush including removing debris to outside the MOD land complete as per details given below : -

(i) Dismantling existing cement concrete/ roof tiles on roof including removing debris to outside MOD land as directed. (ii) PCC 1:2:4 type B1 using 20mm graded stone aggregates of average thickness of 50 mm. (iii) Rendering 10mm thick in CM 1:3 on concrete roof surfaces and finish the surface even and smooth without using extra cement including mixing water proofing compound as per manufacturer’s instructions. (iv) Surface should be free from any loose paint, dust or grease. Remove all existing bitumen coatings completely by using intense wire brushing, high speed water jet & vacuum cleaner for thorough cleaning of the surface.

(v) Cracks at corner joints, channels and parapets should be filled upto 3mm with crack seal material of M/s Asian paints or equivalent in M/s Dr Fixit / M/s Pidilite / M/s Sika chemical to be used. (vi) Bigger Cracks bigger than 3mm should be filled with polymer modified cement mortar. (vii) Apply a coat of self priming smart care damp proof ultra (Code 5698) of M/s Asian paints or equivalent in M/s Dr Fixit / M/s Pidilite / M/s Sika chemical with 33% dilution with water using brush/roller on newly plastered surface after curing as per IS-456 and allow to dry for 4 to 6 hours (dilution & forced coverage requirement strictly as per manufacturer’s instructions).

(viii) After the primed surface has dried, apply first coat of water proofing smart care damp proof ultra (Code 5698) of M/s Asian paints or equivalent in M/s Dr Fixit / M/s Pidilite / M/s Sika chemical using brush/roller on the same primed surface & allow to dry for 4 to 6 hours. (ix) Apply 2nd coat of water proofing smart care damp proof ultra (Code 5698) of M/s Asian paints or equivalent in M/s Dr Fixit / M/s Pidilite / M/s Sika chemical using brush/roller on the same surface. The temp to be maintained 25 to 35° C through out the all above application work.

Note for item No 100 to 100.03:- (a) The work shall be carried out through authorized of manufacturers only. MOU to be submitted before commencement of work. (b) A performance guarantee certificate for 10 years shall be submitted by the contractor to the GE on completion of work and 2% of quoted amount shall be retained agaist the guarantee. Contractor may also give FDR for guarantee amount. (c) The unit quoted rate is deemed to include taking down of water pipeline, tanks, wires (etc) found on roof and refix at the original position after complete treatment of roof.

Note for item No 100 to 100.03:- (d) The unit quoted rateis inclusive of tools, plants including scaffolding required for working upto approx 7.5 mtr height from natural ground level. (e) Adoption of necessary safety arrangement like safety belts, ropes, helmets, netting etc. which are required for safety of working labour at height exceeding 3 to 25 mtr height shall be mandatary and deemed to be included in the unit rate quoted. (f) In case of any sign of dampness after 15 Days of treatment, an additional coat of damp proof materials to be applied wothout any extra coat.

Supply and fix polished Sadarahalli granite slab flooring 20 to 22 mm thick with grey cement slurry mixed with pigment to match the shade of the slab including 20mm thick screed bed in cement mortar 1:4 complete on staicase including necessary roughening complete all as specified and as directed.

Supply and fix 20 to 22mm thick polished sadarahalli granite tiles as in riser and dado of steps over 10mm thick cement mortar 1:4 complete all as specified and as directed.

S&F prepainted galvalume alu zinc coating based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/claddding to wall, fix with self tapping screws with necessary washers/welding all as specified and directed. (The profile of the sheet as specifed and directed.

S&F steel work in tubular trusses including special shaped washer etc complete or butt welded tubes conforming to IS-1161-1979 graded St-240 all as specified and directed.

S&F for 8 feet 4 pipes pulley operatoed cloths drying system consisting of aluminium pipe of outer dia 22mm, inner dia 19.80mm, made up of detrin with rope guide mounted on channel pair of lemgth 24 feet (distance between two pipes is adjustable) locking system to hide rope knot, channel to be mounted or fixed with self taping screws provided in kit. Rope will be HDPE double core of 4mm dia fixing to ceiling as specified and directed by Engr-in-Charge and minimum weight of one pipe shall not be less than 0.20kg, minimum weight of rope shall not be less than 7700Gms/unit (for 04 pipes).

S/F Celing rose PVC polycarbonate, Isolated body 3 terminals 230 V complete all as specified and directed.

S&F, Electric Bell, Ding dong type working on 230 volts AC supply complete all as specified and directed.

Talking down existing ceiling fan of any size and any capacity and applying a coat of painting and writing MES No on ceiling fan complete in suitable size with synthetic enamel paint by spraying including filling cavities with filler, and all as specified and as directed.

Taking down existing Exhaust fan of any size and any capacity and applying a coat of painting and writing MES No. of ceiling fan complete in suitable size with synthetic enamel paint by spraying including filling cavities with filler, and refixing the same location complete all as specified and directed.

S & F TP&N, 04 way vertical type sheet steel powder coated distribution board double door with 200amps rated bus bar suitable for MCCB fixing as incommer and MCB's fixing as outgoing Neutral link, Earth Bar and Din rail IP-43 protection, door earthing, mechanical, impect strength IK08, insulated bus bar assembly working on 415 V, 50 Hz AC supply all as specified and directed.

S&F SP&N, 8 way horizonal type sheet steel powder coated distribution board double door with 200amps rated bus ber suitable for MCB fixing as incommer/out going Neutral link, Earth Bar and Din rail working on 240 V, 50 Hz, AC supply all as specified and directed

S & F MCCB, FP, 63 Amps, 16 KA, working on 415 volts, 50Hz AC supply, all as specified and directed.

S & F RCCB, DP, 25 Amps 300mA, 240 Volts 50 Hz AC, all as specified and directed.

S & F MCB, SP, 6-32 amps, 10 KA, 240 volts, 50Hz, AC, all as specified and directed.

S&F LED lights fitting 1 x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed..

Supply and fixing LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

S&F lamp holder pvc/polycarbonate type with back plate sutable for batten fitting, all as specified and directed.

S&F 10 watts LED lamp type B22, all as specified and directed.

S&F LED streetlight fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and reat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complate all as specified and directed..

Taking down existing Energy meters carefully after disconnecting the incoming and out going electric wire connection, keeping in safe custody including recorded all parameters refixing back at site in the new panel board and connecting the electric circuit all as specified and directed.

Supply, installation, testing and commissioning of factory made meter panel board of size length 1.5mtr, height 1.0 mtrs and depth 0.35mtr suitable for wall mounted/floor mounted made out of CRCA sheet of 2mm thick indoor type totally enclosed weather proof, dust vermin proof with front openable, hinged door locking arrangement mounted on MS clamp welded to panel body grouted in well including provision of Acrylic sheet for meter reading, space for refixing of single phase KWH meters-07Nos, and VTPN DD DB-01Nos. AC 230volts including lugs, spacer mounting channels, rubber gasket, locking knobs, PVC shrinkable sleeves, nut bolts, washers etc. epoxy powder coated spray paint with primer complete including taking out unav panel all as specified and directed.

Earthing complete with galvanised earth plate electrode 60 cm x 60cm x 6.15 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level, connected to GI earth wire 4 mm dia as earthling lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber, MS funnel with wire mesh, Cl cover with frame etc including necessary excavation in any type of strata, returning, filling removal of soll outside MD land, filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I, connected to Earthing test point all as specified and directed on testing on completion. Note: The contractor should note down the ER values and obtain signature from user and submitted to the department.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid dry and pointed all as specified.

Demolition of cement concrete in ground floors and pavings nexc 15cm thickness (below or above ground level), all as specified and directed..

Taking down cement plaster from brick or stone walls etc , including raking out joints, hacking for key, scrubbing down with water, etc. walls of any description all as specified and directed.

Demolition of brick work or stone masonry built in CM incl all quoins, all as specified and directed.

Demolition of reinforced cement concrete in any description and in any position not otherwise specifically provided for, all as specified and directed..

Taking up or down 15mm steel tubing and connections all as specified and directed.

Taking up or down 20mm steel tubing and connections all as specified and directed.

Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or removal to store, all as specified and directed..

Taking down chowkats or frames with shutter not exceeding 1.5 Sqm (without taking off shutters from the frame) of any description, all as specified and directed.

Taking down chowkats or frames with shutter exceeding 1.5Ssqm but not exceeding 4 Sqm (without taking off shutters from the frame) of any description, all as specified and directed.

Dismantling of plain or corrrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed.

Dismantling timber scantlings 40 sq.cm and over in section, in any position un framed work all as specified and directed.

Taking down DBs including MCCB's/MC B's 415 Volt/230 Voll all as specified and directed

Sai Ram Builders

SREE BUILDERS

OM ENTERPRISES

SRI GANESH ENTERPRISES

T C KARUNANITHI

chowdeshwariconstructionco

D NAGI REDDY