GE(S)BTD 28 OF 2026-27 PROVISION OF LBW AND MINOR WORKS UNDER AGE BR I AND AGE BR II AND AGE EM IV OF GE(S) BATHINDA AT BATHINDA MIL STN (2ND CALL) (JOB No LBW-32 of 2025-26 AND MINOR - 04 OF 2026-27)

Supply, installation , testing and commissioning Heavy duty plastic packaged Air cooling unit Evaporative type model No VC 20U and 11771 CFM at zero static , power consumption 1.1 KW along with cool flow dispenser for enhanced cooling and weather resistant and body material with UV stabilized Engineering Plastic Body for design powerful air delivery , 04 Side cooling pads for superior cooling and single phase motor and fan to deliver the powerful air flow for better cooling , auto connection of water tank to quick fill ,water connection with ball valve drain and overflow connection complete with to be must comprising as given below:- Tank Capacity -70 Ltrs , Cooling Media:- Honeycomb pads Pad Thickness:- 100mm Air moving device:- Fan Fan diameter:- 620 MM Cooling Surface area of pads"- 1.6 Sqm Minimum cooling efficiency:- 80% Discharge flow:- Top/Bottom ( as per site condition ) Cooling Area:- 2000 Sqft Nominal Air delivery: - 20000 CMH Controller :- as per standard and OEM recommended

Supply, installation , testing and commissioning Heavy duty plastic packaged Air cooling unit Evaporative type model No VC 11U and 6400 CFM at zero static and power consumption 0.45 KW along with cool flow dispenser for enhanced cooling and weather resistant and body material with UV stabilized Engineering Plastic Body for design powerful air delivery , 03 Side cooling pads for superior cooling and single phase motor and fan to deliver the powerful air flow for better cooling , auto connection of water tank to quick fill ,water connection with ball valve drain and overflow connection complete with to be must comprising as given below:- Tank Capacity -50 Ltrs , Cooling Media:- Honeycomb pads Pad thickness:- 60 mm Air moving device:- Fan Fan diameter:- 425 MM Cooling Surface area of pads"- 1.45 Sqm Minimum cooling efficiency:- 80% Discharge flow:- Top/Bottom/Side ( as per site condition ) Cooling Area:- 700 Sqft Nominal Air delivery: - 11000 CMH Controller :- as per standard and OEM recommended

Supply and fixing of Canvas cloth connection suitable size for air cooler complete all as specified and directed.

Supply and installation of GI, Pre fabricated rectangular GI ducts, of 24 SWG, Galvanised Iron Sheet thickness 0.70 mm complete with MS flanges and bracing (as specified), necessary supports using thread rods (as directed) and anchor bolts, supply air collars, vanes, splitters,any retrofit work complete with for suitable air flow incl cutting on wall and make a good to disturbed area as per existing complete all as specified and directed.

Supply, installation, double deflection ABS Grill as per suitable size " with powder coating with Damper including civil work with core cut, chiselling , cutting of wall , plaster etc and making good disturbed surfaces area after fitting the all respect all as specified and directed.

Supply , installation , testing and commissioning of Paramount/Nitrile rubber close cell flat insulation 09 mm thick on SA Duct on required sun expose area appllied on Newly installed Ducting line complete all as specified and directed.

Supplying, Laying ,and testing in of XLPE insulated armoured heavy duty electric cable of the size 25 Sqmm 4 core following size ,1100 Volts grade , with stranded aluminium conductor served with an inner sheathing of PVC tape armoured with GI wire and over all PVC sheathed in laid trenches/ passing through pipe/duct/road crossing/surface of wall/in hume pipe etc including fixing hardware,clamps,gland, thimble and making good the damaged surfaces etc complete all as specified and as directed.

Supply and Fixing in repair Sheet metal enclosers made out of CRCA mild steel sheet not less than 1.2mm thick,, IP-54 protection, flush mounted for metal door, powder coated double door VTPN 4 way, 415 V AC with 200 Amps rated copper bus bar, Double door, dust and vermin proof suitable for incorporation of Incoming MCCB and outgoing MCBs / MCCBs/ Isolators and earth & neutral bus bar etc conforming to IS/IEC-61439-2:2011, BS-5484 , including flush to wall and existing surface to be matched complete all as specified and as directed by Engineer-in- charge. Notes: (i) MCB SP 32Amp C curve-10 Nos will be included in the quoted rate. (ii) MCCB shall be measured and paid separately under appropriate items.

Supply and fixing in replacement of MCCB 100 Amp, 4 Pole, 415 volt, ISI Marked,short circuit breaking capacity not less than 25KA , thermal magnetic trip, setting 80-100%, Icu-100% Ics confirming to IEC-947, IS-13947, thimbles, nuts, bolts, washers etc .complete all as specified and directed.

supply and fixing in replacement of sheet metal enclosure MCB board, 02 way, with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including DP MCB 16 Amp, 10 KA alongwith l cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.